Eine aufbereitete Darstellung der Quelle

 
     
 
 
Anforderungen  |   Konzepte  |   Entwurf  |   Entwicklung  |   Qualitätssicherung  |   Lebenszyklus  |   Steuerung
 
 
 
 
Benutzer

products/Sources/formale Sprachen/C/Firefox/layout/reftests/svg/   (Firefox Browser Version 153.0.1©)  Datei vom 27.6.2026 mit Größe 1 kB image not shown  

Bilddatei

sun50i-a64-bananapi-m64.dts


products/Sources/formale Sprachen/C/Linux/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts

// SPDX-License-Identifier: (GPL-2.0+ OR MIT) // Copyright (c) 2016 ARM Ltd. /dts-v1/; #include "sun50i-a64.dtsi" #include "sun50i-a64-cpu-opp.dtsi" #include / { model = "BananaPi-M64"; compatible = "sinovoip,bananapi-m64", "allwinner,sun50i-a64"; aliases { ethernet0 = &emac; serial0 = &uart0; serial1 = &uart1; }; chosen { stdout-path = "serial0:115200n8"; }; hdmi-connector { compatible = "hdmi-connector"; type = "a"; port { hdmi_con_in: endpoint { remote-endpoint = <&hdmi_out_con>; }; }; }; leds { compatible = "gpio-leds"; led-0 { label = "bananapi-m64:red:pwr"; gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */ default-state = "on"; }; led-1 { label = "bananapi-m64:green:user"; gpios = <&pio 4 14 GPIO_ACTIVE_HIGH>; /* PE14 */ }; led-2 { label = "bananapi-m64:blue:user"; gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>; /* PE15 */ }; }; wifi_pwrseq: pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "ext_clock"; }; }; &codec { status = "okay"; }; &codec_analog { cpvdd-supply = <®_eldo1>; status = "okay"; }; &cpu0 { cpu-supply = <®_dcdc2>; }; &cpu1 { cpu-supply = <®_dcdc2>; }; &cpu2 { cpu-supply = <®_dcdc2>; }; &cpu3 { cpu-supply = <®_dcdc2>; }; &dai { status = "okay"; }; &de { status = "okay"; }; &ehci0 { status = "okay"; }; &ehci1 { status = "okay"; }; &emac { pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>; phy-mode = "rgmii-id"; phy-handle = <&ext_rgmii_phy>; phy-supply = <®_dc1sw>; status = "okay"; }; &hdmi { hvcc-supply = <®_dldo1>; status = "okay"; }; &hdmi_out { hdmi_out_con: endpoint { remote-endpoint = <&hdmi_con_in>; }; }; &i2c1 { status = "okay"; }; &i2c1_pins { bias-pull-up; }; &mdio { ext_rgmii_phy: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <1>; }; }; &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_dcdc1>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; disable-wp; bus-width = <4>; status = "okay"; }; &mmc1 { pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; vmmc-supply = <®_dldo2>; vqmmc-supply = <®_dldo4>; mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; non-removable; status = "okay"; brcmf: wifi@1 { reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&r_pio>; interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */ interrupt-names = "host-wake"; }; }; &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>; vmmc-supply = <®_dcdc1>; bus-width = <8>; non-removable; cap-mmc-hw-reset; status = "okay"; }; &ohci0 { status = "okay"; }; &ohci1 { status = "okay"; }; &r_rsb { status = "okay"; axp803: pmic@3a3 { compatible = "x-powers,axp803"; reg = <0x3a3>; interrupt-parent = <&r_intc>; interrupts = ; x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */ }; }; #include "axp803.dtsi" &ac_power_supply { status = "okay"; }; &battery_power_supply { status = "okay"; }; ®_aldo1 { /* * This regulator also drives the PE pingroup GPIOs, * which also controls two LEDs. */ regulator-always-on; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-name = "afvcc-csi"; }; ®_aldo2 { regulator-always-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-name = "vcc-pl"; }; ®_aldo3 { regulator-always-on; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-name = "vcc-pll-avcc"; }; ®_dc1sw { /* * This regulator also indirectly drives the PD pingroup GPIOs, * which also controls the power LED. */ regulator-always-on; regulator-name = "vcc-phy"; }; ®_dcdc1 { regulator-always-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-name = "vcc-3v3"; }; ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1040000>; regulator-max-microvolt = <1300000>; regulator-name = "vdd-cpux"; }; /* DCDC3 is polyphased with DCDC2 */ ®_dcdc5 { regulator-always-on; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; regulator-name = "vcc-dram"; }; ®_dcdc6 { regulator-always-on; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; regulator-name = "vdd-sys"; }; ®_dldo1 { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-name = "vcc-hdmi-dsi"; }; ®_dldo2 { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-name = "vcc-wifi"; }; ®_dldo4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-name = "vcc-wifi-io"; }; ®_drivevbus { regulator-name = "usb0-vbus"; status = "okay"; }; ®_eldo1 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-name = "cpvdd"; }; ®_fldo1 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-name = "vcc-1v2-hsic"; }; /* * The A64 chip cannot work without this regulator off, although * it seems to be only driving the AR100 core. * Maybe we don't still know well about CPUs domain. */ ®_fldo2 { regulator-always-on; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; regulator-name = "vdd-cpus"; }; ®_rtc_ldo { regulator-name = "vcc-rtc"; }; &simplefb_hdmi { vcc-hdmi-supply = <®_dldo1>; }; &sound { status = "okay"; simple-audio-card,widgets = "Headphone", "Headphone Jack", "Microphone", "Microphone Jack", "Microphone", "Onboard Microphone"; simple-audio-card,routing = "Left DAC", "DACL", "Right DAC", "DACR", "ADCL", "Left ADC", "ADCR", "Right ADC", "Headphone Jack", "HP", "MIC2", "Microphone Jack", "Onboard Microphone", "MBIAS", "MIC1", "Onboard Microphone"; }; &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; uart-has-rtscts; status = "okay"; bluetooth { compatible = "brcm,bcm43438-bt"; clocks = <&rtc CLK_OSC32K_FANOUT>; clock-names = "lpo"; vbat-supply = <®_dldo2>; vddio-supply = <®_dldo4>; device-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ }; }; &usb_otg { dr_mode = "otg"; status = "okay"; }; &usb_power_supply { status = "okay"; }; &usbphy { usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_drivevbus>; status = "okay"; };

                                                                                                                                                                                                                                                                                                                                                                                                     

Neuigkeiten

     Aktuelles
     Motto des Tages

Open Source Software

     Quellcodebibliothek
     Eigene Quellcodes
     Fremde Quellcodes
     Suchen
Jenseits des Üblichen ....
    

Besucherstatistik

Besucherstatistik
Statistik
#Sources=277311
#Domains=752002