/* Copyright (C) 2003 Jean-Marc Valin */
/**
@ file arch . h
@ brief Various architecture definitions Speex
*/
/*
Redistribution and use in source and binary forms , with or without
modification , are permitted provided that the following conditions
are met :
- Redistributions of source code must retain the above copyright
notice , this list of conditions and the following disclaimer .
- Redistributions in binary form must reproduce the above copyright
notice , this list of conditions and the following disclaimer in the
documentation and / or other materials provided with the distribution .
- Neither the name of the Xiph . org Foundation nor the names of its
contributors may be used to endorse or promote products derived from
this software without specific prior written permission .
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
` ` AS IS ' ' AND ANY EXPRESS OR IMPLIED WARRANTIES , INCLUDING , BUT NOT
LIMITED TO , THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED . IN NO EVENT SHALL THE FOUNDATION OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT , INDIRECT , INCIDENTAL , SPECIAL ,
EXEMPLARY , OR CONSEQUENTIAL DAMAGES ( INCLUDING , BUT NOT LIMITED TO ,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES ; LOSS OF USE , DATA , OR
PROFITS ; OR BUSINESS INTERRUPTION ) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY , WHETHER IN CONTRACT , STRICT LIABILITY , OR TORT ( INCLUDING
NEGLIGENCE OR OTHERWISE ) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE , EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE .
*/
#ifndef ARCH_H
#define ARCH_H
/* A couple test to catch stupid option combinations */
#ifdef FIXED_POINT
#ifdef FLOATING_POINT
#error You cannot compile as floating point and fixed point at the same time
#endif
#ifdef USE_SSE
#error SSE is only for floating-point
#endif
#if defined (ARM4_ASM) + defined (ARM5E_ASM) + defined (BFIN_ASM) > 1
#error Make up your mind. What CPU do you have?
#endif
#ifdef VORBIS_PSYCHO
#error Vorbis-psy model currently not implemented in fixed-point
#endif
#else
#ifndef FLOATING_POINT
#error You now need to define either FIXED_POINT or FLOATING_POINT
#endif
#if defined (ARM4_ASM) || defined (ARM5E_ASM) || defined (BFIN_ASM)
#error I suppose you can have a [ARM4/ARM5E/Blackfin] that has float instructions?
#endif
#ifdef FIXED_DEBUG
#error "Don't you think enabling fixed-point is a good thing to do if you want to debug that?"
#endif
#endif
#ifndef OUTSIDE_SPEEX
#include "speex/speexdsp_types.h"
#endif
#define ABS(x) ((x) < 0 ? (-(x)) : (x)) /**< Absolute integer value. */
#define ABS16(x) ((x) < 0 ? (-(x)) : (x)) /**< Absolute 16-bit value. */
#define MIN16(a,b) ((a) < (b) ? (a) : (b)) /**< Maximum 16-bit value. */
#define MAX16(a,b) ((a) > (b) ? (a) : (b)) /**< Maximum 16-bit value. */
#define ABS32(x) ((x) < 0 ? (-(x)) : (x)) /**< Absolute 32-bit value. */
#define MIN32(a,b) ((a) < (b) ? (a) : (b)) /**< Maximum 32-bit value. */
#define MAX32(a,b) ((a) > (b) ? (a) : (b)) /**< Maximum 32-bit value. */
#ifdef FIXED_POINT
typedef spx_int16_t spx_word16_t;
typedef spx_int32_t spx_word32_t;
typedef spx_word32_t spx_mem_t;
typedef spx_word16_t spx_coef_t;
typedef spx_word16_t spx_lsp_t;
typedef spx_word32_t spx_sig_t;
#define Q15ONE 32767
#define LPC_SCALING 8192
#define SIG_SCALING 16384
#define LSP_SCALING 8192 .
#define GAMMA_SCALING 32768 .
#define GAIN_SCALING 64
#define GAIN_SCALING_1 0 .015625
#define LPC_SHIFT 13
#define LSP_SHIFT 13
#define SIG_SHIFT 14
#define GAIN_SHIFT 6
#define WORD2INT(x) ((x) < -32767 ? -32768 : ((x) > 32766 ? 32767 : (x)))
#define VERY_SMALL 0
#define VERY_LARGE32 ((spx_word32_t)2147483647 )
#define VERY_LARGE16 ((spx_word16_t)32767 )
#define Q15_ONE ((spx_word16_t)32767 )
#ifdef FIXED_DEBUG
#include "fixed_debug.h"
#else
#include "fixed_generic.h"
#ifdef ARM5E_ASM
#include "fixed_arm5e.h"
#elif defined (ARM4_ASM)
#include "fixed_arm4.h"
#elif defined (BFIN_ASM)
#include "fixed_bfin.h"
#endif
#endif
#else
typedef float spx_mem_t;
typedef float spx_coef_t;
typedef float spx_lsp_t;
typedef float spx_sig_t;
typedef float spx_word16_t;
typedef float spx_word32_t;
#define Q15ONE 1 .0 f
#define LPC_SCALING 1 .f
#define SIG_SCALING 1 .f
#define LSP_SCALING 1 .f
#define GAMMA_SCALING 1 .f
#define GAIN_SCALING 1 .f
#define GAIN_SCALING_1 1 .f
#define VERY_SMALL 1 e-15 f
#define VERY_LARGE32 1 e15f
#define VERY_LARGE16 1 e15f
#define Q15_ONE ((spx_word16_t)1 .f)
#define QCONST16(x,bits) (x)
#define QCONST32(x,bits) (x)
#define NEG16(x) (-(x))
#define NEG32(x) (-(x))
#define EXTRACT16(x) (x)
#define EXTEND32(x) (x)
#define SHR16(a,shift) (a)
#define SHL16(a,shift) (a)
#define SHR32(a,shift) (a)
#define SHL32(a,shift) (a)
#define PSHR16(a,shift) (a)
#define PSHR32(a,shift) (a)
#define VSHR32(a,shift) (a)
#define SATURATE16(x,a) (x)
#define SATURATE32(x,a) (x)
#define SATURATE32PSHR(x,shift,a) (x)
#define PSHR(a,shift) (a)
#define SHR(a,shift) (a)
#define SHL(a,shift) (a)
#define SATURATE(x,a) (x)
#define ADD16(a,b) ((a)+(b))
#define SUB16(a,b) ((a)-(b))
#define ADD32(a,b) ((a)+(b))
#define SUB32(a,b) ((a)-(b))
#define MULT16_16_16(a,b) ((a)*(b))
#define MULT16_32_32(a,b) ((a)*(b))
#define MULT16_16(a,b) ((spx_word32_t)(a)*(spx_word32_t)(b))
#define MAC16_16(c,a,b) ((c)+(spx_word32_t)(a)*(spx_word32_t)(b))
#define MULT16_32_Q15(a,b) ((a)*(b))
#define MULT16_32_P15(a,b) ((a)*(b))
#define MAC16_32_Q15(c,a,b) ((c)+(a)*(b))
#define MAC16_16_Q11(c,a,b) ((c)+(a)*(b))
#define MAC16_16_Q13(c,a,b) ((c)+(a)*(b))
#define MAC16_16_P13(c,a,b) ((c)+(a)*(b))
#define MULT16_16_Q11_32(a,b) ((a)*(b))
#define MULT16_16_Q13(a,b) ((a)*(b))
#define MULT16_16_Q14(a,b) ((a)*(b))
#define MULT16_16_Q15(a,b) ((a)*(b))
#define MULT16_16_P15(a,b) ((a)*(b))
#define MULT16_16_P13(a,b) ((a)*(b))
#define MULT16_16_P14(a,b) ((a)*(b))
#define DIV32_16(a,b) (((spx_word32_t)(a))/(spx_word16_t)(b))
#define PDIV32_16(a,b) (((spx_word32_t)(a))/(spx_word16_t)(b))
#define DIV32(a,b) (((spx_word32_t)(a))/(spx_word32_t)(b))
#define PDIV32(a,b) (((spx_word32_t)(a))/(spx_word32_t)(b))
#define WORD2INT(x) ((x) < -32767 .5 f ? -32768 : \
((x) > 32766 .5 f ? 32767 : (spx_int16_t)floor(.5 + (x))))
#endif
#if defined (CONFIG_TI_C54X) || defined (CONFIG_TI_C55X)
/* 2 on TI C5x DSP */
#define BYTES_PER_CHAR 2
#define BITS_PER_CHAR 16
#define LOG2_BITS_PER_CHAR 4
#else
#define BYTES_PER_CHAR 1
#define BITS_PER_CHAR 8
#define LOG2_BITS_PER_CHAR 3
#endif
#ifdef FIXED_DEBUG
extern long long spx_mips;
#endif
#endif
Messung V0.5 in Prozent C=94 H=97 G=95
¤ Dauer der Verarbeitung: 0.6 Sekunden
¤
*© Formatika GbR, Deutschland