Eine aufbereitete Darstellung der Quelle
Stufen
Anforderungen
|
Konzepte
|
Entwurf
|
Entwicklung
|
Qualitätssicherung
|
Lebenszyklus
|
Steuerung
Ziele
Untersuchung
mit Columbo
Integrität von
Datenbanken
Interaktion und
Portierbarkeit
Ergonomie der
Schnittstellen
Angebot
Produkte
Projekt
Beratung
Mittel
Analytik
Modellierung
Sprachen
Algebra
Logik
Hardware
Denken
Kreativität
Zusammenhänge
Gesellschaft
Wirtschaft
Branche
Firma
Benutzer
products
/
Sources
/
formale Sprachen
/
C
/
LibreOffice
/
icon-themes
/
colibre
/
brand
/
shell
/ (
LibreOffice
Version 25.8.3.2
©
) Datei vom 5.10.2025 mit Größe 4 kB
Bilddatei
kirkwood-nas2big.dts
products/Sources/formale Sprachen/C/Linux/arch/arm/boot/dts/marvell/kirkwood-nas2big.dts
// SPDX-License-Identifier: GPL-2.0 /* * Device Tree file for LaCie 2Big NAS * * Copyright (C) 2015 Seagate * * Author: Simon Guinot
* */ /dts-v1/; #include "kirkwood-netxbig.dtsi" / { model = "LaCie 2Big NAS"; compatible = "lacie,nas2big", "lacie,netxbig", "marvell,kirkwood-88f6282", "marvell,kirkwood"; memory { device_type = "memory"; reg = <0x00000000 0x10000000>; }; chosen { bootargs = "console=ttyS0,115200n8"; stdout-path = &uart0; }; ocp@f1000000 { rtc@10300 { /* The on-chip RTC is not powered (no supercap). */ status = "disabled"; }; spi@10600 { /* * A NAND flash is used instead of an SPI flash for * the other netxbig-compatible boards. */ status = "disabled"; }; }; fan { /* * An I2C fan controller (GMT G762) is used but alarm is * wired to a separate GPIO. */ compatible = "gpio-fan"; alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; }; regulators: regulators { status = "okay"; compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; regulator@2 { compatible = "regulator-fixed"; reg = <2>; regulator-name = "hdd1power"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; regulator-always-on; regulator-boot-on; gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>; }; clocks { g762_clk: g762-oscillator { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; }; }; }; }; &mdio { status = "okay"; ethphy0: ethernet-phy@0 { reg = <0>; }; }; &i2c0 { status = "okay"; /* * An external I2C RTC (Dallas DS1337S+) is used. This allows * to power-up the board on an RTC alarm. The external RTC can * be kept powered, even when the SoC is off. */ rtc@68 { compatible = "dallas,ds1307"; reg = <0x68>; interrupts = <43>; }; g762@3e { compatible = "gmt,g762"; reg = <0x3e>; clocks = <&g762_clk>; }; }; &nand { chip-delay = <50>; status = "okay"; partition@0 { label = "U-Boot"; reg = <0x0 0x100000>; }; partition@100000 { label = "uImage"; reg = <0x100000 0x1000000>; }; partition@1100000 { label = "root"; reg = <0x1100000 0x8000000>; }; partition@9100000 { label = "unused"; reg = <0x9100000 0x6f00000>; }; }; &pciec { status = "okay"; }; &pcie0 { status = "okay"; };
2026-10-11
Neuigkeiten
Aktuelles
Motto des Tages
Open Source Software
Quellcodebibliothek
Eigene Quellcodes
Fremde Quellcodes
Suchen
Jenseits des Üblichen ....
Besucherstatistik
Statistik
#Sources=1127926
#Domains=1947682
Impressum
|
Ethik und Gesetz
|
Haftungsausschluß
|
Kontakt
|
Seitenstruktur
|
©
2026 JDD
|