Anforderungen  |   Konzepte  |   Entwurf  |   Entwicklung  |   Qualitätssicherung  |   Lebenszyklus  |   Steuerung
 
 
 
 


Quelle  envprt.cxx   Sprache: C

 
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
 * This file is part of the LibreOffice project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * This file incorporates work covered by the following license notice:
 *
 *   Licensed to the Apache Software Foundation (ASF) under one or more
 *   contributor license agreements. See the NOTICE file distributed
 *   with this work for additional information regarding copyright
 *   ownership. The ASF licenses this file to you under the Apache
 *   License, Version 2.0 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
 */


#include <vcl/print.hxx>
#include <svtools/prnsetup.hxx>
#include <svtools/unitconv.hxx>

#include <cmdid.h>
#include "envprt.hxx"
#include <envlop.hxx>
#include <uitool.hxx>

SwEnvPrtPage::SwEnvPrtPage(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet& rSet)
    : SfxTabPage(pPage, pController, u"modules/swriter/ui/envprinterpage.ui"_ustr, u"EnvPrinterPage"_ustr, &rSet)
    , m_xUpper(m_xBuilder->weld_widget(u"upper"_ustr))
    , m_xLower(m_xBuilder->weld_widget(u"lower"_ustr))
    , m_xTopButton(m_xBuilder->weld_radio_button(u"top"_ustr))
    , m_xBottomButton(m_xBuilder->weld_radio_button(u"bottom"_ustr))
    , m_xRightField(m_xBuilder->weld_metric_spin_button(u"right"_ustr, FieldUnit::CM))
    , m_xDownField(m_xBuilder->weld_metric_spin_button(u"down"_ustr, FieldUnit::CM))
    , m_xPrinterInfo(m_xBuilder->weld_label(u"printername"_ustr))
    , m_xPrtSetup(m_xBuilder->weld_button(u"setup"_ustr))
    , m_aIdsL { m_xBuilder->weld_radio_button(u"horileftl"_ustr),
                m_xBuilder->weld_radio_button(u"horicenterl"_ustr),
                m_xBuilder->weld_radio_button(u"horirightl"_ustr),
                m_xBuilder->weld_radio_button(u"vertleftl"_ustr),
                m_xBuilder->weld_radio_button(u"vertcenterl"_ustr),
                m_xBuilder->weld_radio_button(u"vertrightl"_ustr) }
    , m_aIdsU { m_xBuilder->weld_radio_button(u"horileftu"_ustr),
                m_xBuilder->weld_radio_button(u"horicenteru"_ustr),
                m_xBuilder->weld_radio_button(u"horirightu"_ustr),
                m_xBuilder->weld_radio_button(u"vertleftu"_ustr),
                m_xBuilder->weld_radio_button(u"vertcenteru"_ustr),
                m_xBuilder->weld_radio_button(u"vertrightu"_ustr) }
{
    SetExchangeSupport();

    // Metrics
    FieldUnit eUnit = ::GetDfltMetric(false);
    ::SetFieldUnit(*m_xRightField, eUnit);
    ::SetFieldUnit(*m_xDownField, eUnit);

    // Install handlers
    m_xTopButton->connect_toggled(LINK(this, SwEnvPrtPage, ClickHdl));
    m_xBottomButton->connect_toggled(LINK(this, SwEnvPrtPage, ClickHdl));

    m_xPrtSetup->connect_clicked(LINK(this, SwEnvPrtPage, ButtonHdl));

    for (auto& a : m_aIdsL)
        a->connect_toggled(LINK(this, SwEnvPrtPage, LowerHdl));
    for (auto& a : m_aIdsU)
        a->connect_toggled(LINK(this, SwEnvPrtPage, UpperHdl));

    // Bitmaps
    ClickHdl(*m_xBottomButton);
}

SwEnvPrtPage::~SwEnvPrtPage()
{
    m_xPrt.reset();
}

IMPL_LINK_NOARG(SwEnvPrtPage, ClickHdl, weld::Toggleable&, void)
{
    // Envelope from bottom, otherwise Envelope from top
    const bool bLowerActive = m_xBottomButton->get_active();
    m_xUpper->set_visible(!bLowerActive);
    m_xLower->set_visible(bLowerActive);
}

IMPL_LINK(SwEnvPrtPage, LowerHdl, weld::Toggleable&, rButton, void)
{
    for (int i = ENV_HOR_LEFT; i <= ENV_VER_RGHT; ++i)
    {
        if (&rButton == m_aIdsL[i].get())
        {
            m_aIdsU[i]->set_active(m_aIdsL[i]->get_active());
            break;
        }
    }
}

IMPL_LINK(SwEnvPrtPage, UpperHdl, weld::Toggleable&, rButton, void)
{
    for (int i = ENV_HOR_LEFT; i <= ENV_VER_RGHT; ++i)
    {
        if (&rButton == m_aIdsU[i].get())
        {
            m_aIdsL[i]->set_active(m_aIdsU[i]->get_active());
            break;
        }
    }
}

IMPL_LINK(SwEnvPrtPage, ButtonHdl, weld::Button&, rBtn, void)
{
    if (&rBtn == m_xPrtSetup.get())
    {
        // Call printer setup
        if (m_xPrt)
        {
            PrinterSetupDialog aDlg(GetFrameWeld());
            aDlg.SetPrinter(m_xPrt);
            aDlg.run();
            rBtn.grab_focus();
            m_xPrinterInfo->set_label(m_xPrt->GetName());
        }
    }
}

std::unique_ptr<SfxTabPage> SwEnvPrtPage::Create(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet* rSet)
{
    return std::make_unique<SwEnvPrtPage>(pPage, pController, *rSet);
}

void SwEnvPrtPage::ActivatePage(const SfxItemSet&)
{
    if (m_xPrt)
        m_xPrinterInfo->set_label(m_xPrt->GetName());
}

DeactivateRC SwEnvPrtPage::DeactivatePage(SfxItemSet* _pSet)
{
    if( _pSet )
        FillItemSet(_pSet);
    return DeactivateRC::LeavePage;
}

void SwEnvPrtPage::FillItem(SwEnvItem& rItem)
{
    int nOrient = 0;
    for (int i = ENV_HOR_LEFT; i <= ENV_VER_RGHT; ++i)
    {
        assert(m_aIdsL[i]->get_active() == m_aIdsU[i]->get_active());
        if (m_aIdsL[i]->get_active())
        {
            nOrient = i;
            break;
        }
    }

    rItem.m_eAlign          = static_cast<SwEnvAlign>(nOrient);
    rItem.m_bPrintFromAbove = m_xTopButton->get_active();
    rItem.m_nShiftRight     = getfieldval(*m_xRightField);
    rItem.m_nShiftDown      = getfieldval(*m_xDownField);
}

bool SwEnvPrtPage::FillItemSet(SfxItemSet* rSet)
{
    FillItem(GetParentSwEnvDlg()->m_aEnvItem);
    rSet->Put(GetParentSwEnvDlg()->m_aEnvItem);
    return true;
}

void SwEnvPrtPage::Reset(const SfxItemSet* rSet)
{
    // Read item
    const SwEnvItem& rItem = static_cast<const SwEnvItem&>( rSet->Get(FN_ENVELOP) );
    m_aIdsL[rItem.m_eAlign]->set_active(true);
    m_aIdsU[rItem.m_eAlign]->set_active(true);

    if (rItem.m_bPrintFromAbove)
        m_xTopButton->set_active(true);
    else
        m_xBottomButton->set_active(true);

    setfieldval(*m_xRightField, rItem.m_nShiftRight);
    setfieldval(*m_xDownField , rItem.m_nShiftDown );

    ActivatePage(*rSet);
    ClickHdl(*m_xTopButton);
}

/* vim:set shiftwidth=4 softtabstop=4 expandtab: */

Messung V0.5
C=95 H=93 G=93

¤ Dauer der Verarbeitung: 0.14 Sekunden  (vorverarbeitet)  ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.






                                                                                                                                                                                                                                                                                                                                                                                                     


Neuigkeiten

     Aktuelles
     Motto des Tages

Software

     Produkte
     Quellcodebibliothek

Aktivitäten

     Artikel über Sicherheit
     Anleitung zur Aktivierung von SSL

Muße

     Gedichte
     Musik
     Bilder

Jenseits des Üblichen ....

Besucherstatistik

Besucherstatistik

Monitoring

Montastic status badge