/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/.
*/
CPPUNIT_TEST_FIXTURE(XmloffDrawTest, testTextBoxLoss)
{ // Load a document that has a shape with a textbox in it. Save it to ODF and reload.
loadFromFile(u"textbox-loss.docx");
saveAndReload(u"impress8"_ustr);
// Make sure that the shape is still a textbox.
uno::Reference<drawing::XDrawPageSupplier> xDrawPageSupplier(mxComponent, uno::UNO_QUERY);
uno::Reference<drawing::XDrawPage> xDrawPage = xDrawPageSupplier->getDrawPage();
uno::Reference<beans::XPropertySet> xShape(xDrawPage->getByIndex(1), uno::UNO_QUERY); bool bTextBox = false;
xShape->getPropertyValue(u"TextBox"_ustr) >>= bTextBox;
// Without the accompanying fix in place, this test would have failed, as the shape only had // editeng text, losing the image part of the shape text.
CPPUNIT_ASSERT(bTextBox);
}
CPPUNIT_TEST_FIXTURE(XmloffDrawTest, testTdf141301_Extrusion_Angle)
{ // Load a document that has a custom shape with extrusion direction as set by LO as its default.
loadFromFile(u"tdf141301_Extrusion_Skew.odg");
// Prepare use of XPath
save(u"draw8"_ustr);
xmlDocUniquePtr pXmlDoc = parseExport(u"content.xml"_ustr);
// Without fix draw:extrusion-skew="50 -135" was not written to file although "50 -135" is not // default in ODF, but only default inside LO.
assertXPath(pXmlDoc, "//draw:enhanced-geometry", "extrusion-skew", u"50 -135");
}
CPPUNIT_TEST_FIXTURE(XmloffDrawTest, testThemeExport)
{ // Create an Impress document which has a master page which has a theme associated with it.
loadFromURL(u"private:factory/simpress"_ustr);
uno::Reference<drawing::XDrawPagesSupplier> xDrawPagesSupplier(mxComponent, uno::UNO_QUERY);
uno::Reference<drawing::XMasterPageTarget> xDrawPage(
xDrawPagesSupplier->getDrawPages()->getByIndex(0), uno::UNO_QUERY);
uno::Reference<beans::XPropertySet> xMasterPage(xDrawPage->getMasterPage(), uno::UNO_QUERY);
// Check if the 12 colors are written in the XML:
xmlDocUniquePtr pXmlDoc = parseExport(u"styles.xml"_ustr); // Without the accompanying fix in place, this test would have failed with: // - Expected: 12 // - Actual : 0 // - XPath '//style:master-page/loext:theme/loext:color-table/loext:color' number of nodes is incorrect // i.e. the theme was lost on exporting to ODF.
assertXPath(pXmlDoc, "//style:master-page/loext:theme/loext:theme-colors/loext:color", 12);
}
// Check that the preview was imported: const avmedia::MediaItem& rItem = pMedia->getMediaProperties(); const Graphic& rGraphic = rItem.getGraphic();
CPPUNIT_ASSERT(!rGraphic.IsNone());
// Check that the crop was imported: const text::GraphicCrop& rCrop = rItem.getCrop();
CPPUNIT_ASSERT_EQUAL(static_cast<sal_Int32>(0), rCrop.Top);
CPPUNIT_ASSERT_EQUAL(static_cast<sal_Int32>(0), rCrop.Bottom);
CPPUNIT_ASSERT_EQUAL(static_cast<sal_Int32>(1356), rCrop.Left);
CPPUNIT_ASSERT_EQUAL(static_cast<sal_Int32>(1356), rCrop.Right);
// Execute ODP export:
save(u"impress8"_ustr);
xmlDocUniquePtr pXmlDoc = parseExport(u"content.xml"_ustr); // Check that the preview was exported: // Without the accompanying fix in place, this test would have failed with: // - Expected: 1 // - Actual : 0 // - XPath '//draw:frame[@draw:style-name='gr1']/draw:image' number of nodes is incorrect // i.e. the preview wasn't exported to ODP.
assertXPath(pXmlDoc, "//draw:frame[@draw:style-name='gr1']/draw:image", "href",
u"Pictures/MediaPreview1.png"); // Check that the crop was exported:
assertXPath(pXmlDoc, "//style:style[@style:name='gr1']/style:graphic-properties", "clip",
u"rect(0cm, 1.356cm, 0cm, 1.356cm)");
}
CPPUNIT_TEST_FIXTURE(XmloffDrawTest, testThemeImport)
{ // Given a document that has a master page with a theme associated:
loadFromFile(u"theme.fodp");
// Then make sure the doc model has a master page with a theme:
uno::Reference<drawing::XDrawPagesSupplier> xDrawPagesSupplier(mxComponent, uno::UNO_QUERY);
uno::Reference<drawing::XMasterPageTarget> xDrawPage(
xDrawPagesSupplier->getDrawPages()->getByIndex(0), uno::UNO_QUERY);
uno::Reference<beans::XPropertySet> xMasterpage(xDrawPage->getMasterPage(), uno::UNO_QUERY);
// We expect the theme to be set on the master page
CPPUNIT_ASSERT(xTheme.is()); auto* pUnoTheme = dynamic_cast<UnoTheme*>(xTheme.get());
CPPUNIT_ASSERT(pUnoTheme); auto pTheme = pUnoTheme->getTheme();
CPPUNIT_ASSERT(pTheme);
CPPUNIT_ASSERT_EQUAL(u"Office Theme"_ustr, pTheme->GetName()); auto pColorSet = pTheme->getColorSet();
CPPUNIT_ASSERT(pColorSet);
CPPUNIT_ASSERT_EQUAL(u"Office"_ustr, pColorSet->getName());
CPPUNIT_TEST_FIXTURE(XmloffDrawTest, testTextAndFillThemeColorExportImport)
{ // Given a document that refers to a theme color:
loadFromFile(u"Reference-ThemeColors-TextAndFill.pptx");
saveAndReload(u"impress8"_ustr);
// Make sure the export result has the theme reference:
xmlDocUniquePtr pXmlDoc = parseExport(u"content.xml"_ustr);
// check fill color theme
uno::Reference<drawing::XShape> xShape(getShape(0));
CPPUNIT_ASSERT(xShape.is());
uno::Reference<beans::XPropertySet> xShapeProperties(xShape, uno::UNO_QUERY);
uno::Reference<util::XComplexColor> xComplexColor;
xShapeProperties->getPropertyValue(u"FillComplexColor"_ustr) >>= xComplexColor;
CPPUNIT_ASSERT(xComplexColor.is()); auto aComplexColor = model::color::getFromXComplexColor(xComplexColor);
CPPUNIT_ASSERT_EQUAL(model::ThemeColorType::Accent6, aComplexColor.getThemeColorType());
CPPUNIT_ASSERT_EQUAL(size_t(1), aComplexColor.getTransformations().size());
CPPUNIT_ASSERT_EQUAL(model::TransformationType::LumMod,
aComplexColor.getTransformations()[0].meType);
CPPUNIT_ASSERT_EQUAL(sal_Int16(7500), aComplexColor.getTransformations()[0].mnValue);
}
CPPUNIT_TEST_FIXTURE(XmloffDrawTest, testTableInShape)
{ // Given a document with a shape with a "FrameX" parent style (starts with Frame, but is not // Frame):
loadFromFile(u"table-in-shape.fodt");
// Then make sure the table inside the shape is not lost:
uno::Reference<drawing::XDrawPageSupplier> xDrawPageSupplier(mxComponent, uno::UNO_QUERY);
uno::Reference<drawing::XDrawPage> xDrawPage = xDrawPageSupplier->getDrawPage();
uno::Reference<text::XTextRange> xShape(xDrawPage->getByIndex(0), uno::UNO_QUERY);
uno::Reference<container::XEnumerationAccess> xText(xShape->getText(), uno::UNO_QUERY);
uno::Reference<container::XEnumeration> xEnum = xText->createEnumeration();
uno::Reference<text::XTextTable> xTable(xEnum->nextElement(), uno::UNO_QUERY); // Without the accompanying fix in place, this test would have crashed, as xTable was an empty // reference, i.e. the table inside the shape was lost.
uno::Reference<text::XTextRange> xCell(xTable->getCellByName(u"A1"_ustr), uno::UNO_QUERY);
CPPUNIT_ASSERT_EQUAL(u"A1"_ustr, xCell->getString());
}
// Tests for save/load of new (LO 7.4) attribute loext:extrusion-metal-type // Since ODF 1.4 it is available as draw:extrusion-metal-type in the standard. namespace
{ void lcl_assertMetalProperties(std::string_view sInfo, uno::Reference<drawing::XShape>& rxShape,
sal_Int16 nExpectedMetalType)
{
uno::Reference<beans::XPropertySet> xShapeProps(rxShape, uno::UNO_QUERY);
uno::Sequence<beans::PropertyValue> aGeoPropSeq;
xShapeProps->getPropertyValue(u"CustomShapeGeometry"_ustr) >>= aGeoPropSeq;
comphelper::SequenceAsHashMap aGeoPropMap(aGeoPropSeq);
uno::Sequence<beans::PropertyValue> aExtrusionSeq;
aGeoPropMap.getValue(u"Extrusion"_ustr) >>= aExtrusionSeq;
comphelper::SequenceAsHashMap aExtrusionPropMap(aExtrusionSeq);
// Test, that attribute is written with 'loext' namespace in extended version before ODF 1.4
SetODFDefaultVersion(SvtSaveOptions::ODFVER_013_EXTENDED); // As of Nov 2024, validating against a version other than LATEST is not implemented.
skipValidation();
saveAndReload(u"writer8"_ustr);
// save in ODF 1.4 strict and test that new attribute is written.
SetODFDefaultVersion(SvtSaveOptions::ODFVER_014);
save(u"writer8"_ustr);
xmlDocUniquePtr pXmlDoc = parseExport(u"content.xml"_ustr);
assertXPath(pXmlDoc, "//draw:enhanced-geometry", "extrusion-metal", u"true");
assertXPath(pXmlDoc, "//draw:enhanced-geometry[@draw:extrusion-metal-type='loext:MetalMSCompatible']");
// save in ODF 1.3 strict and test that new attribute is not written.
SetODFDefaultVersion(SvtSaveOptions::ODFVER_013); // As of Nov 2024, validating against a version other than LATEST is not implemented.
skipValidation();
save(u"writer8"_ustr);
pXmlDoc = parseExport(u"content.xml"_ustr);
assertXPath(pXmlDoc, "//draw:enhanced-geometry", "extrusion-metal", u"true");
assertXPathNoAttribute(pXmlDoc, "//draw:enhanced-geometry", "extrusion-metal-type");
}
// Test, that export in ODFVER_014 is valid. Needs adaption, when ODF 1.5 comes out.
SetODFDefaultVersion(SvtSaveOptions::ODFVER_014);
saveAndReload(u"calc8"_ustr);
// Test, that attribute is written with 'loext' namespace in extended version before ODF 1.4
SetODFDefaultVersion(SvtSaveOptions::ODFVER_013_EXTENDED); // As of Nov 2024, validating against a version other than LATEST is not implemented.
skipValidation();
saveAndReload(u"calc8"_ustr);
// Test, that attribute is not written at all in strict version before ODF 1.4
SetODFDefaultVersion(SvtSaveOptions::ODFVER_013);
save(u"calc8"_ustr);
pXmlDoc = parseExport(u"content.xml"_ustr);
assertXPathNoAttribute(pXmlDoc, "//draw:enhanced-geometry", "extrusion-metal-type");
}
// assert that new attributes are not written in older ODF versions and old one is written.
SetODFDefaultVersion(SvtSaveOptions::ODFVER_013_EXTENDED); // As of Nov 2024, validating against a version other than LATEST is not implemented.
skipValidation();
save(u"writer8"_ustr);
pXmlDoc = parseExport(u"content.xml"_ustr);
assertXPath(pXmlDoc, sXPath, "handle-position", u"$0 10800");
assertXPathNoAttribute(pXmlDoc, sXPath, "handle-position-x");
assertXPathNoAttribute(pXmlDoc, sXPath, "handle-position-y");
}
// assert that new attributes are not written in older ODF versions and old ones are written.
SetODFDefaultVersion(SvtSaveOptions::ODFVER_013_EXTENDED); // As of Nov 2024, validating against a version other than LATEST is not implemented.
skipValidation();
save(u"writer8"_ustr);
pXmlDoc = parseExport(u"content.xml"_ustr);
assertXPath(pXmlDoc, sXPath, "handle-position", u"9000 $0");
assertXPath(pXmlDoc, sXPath, "handle-polar", u"10800 1000");
assertXPathNoAttribute(pXmlDoc, sXPath, "handle-polar-pole-x");
assertXPathNoAttribute(pXmlDoc, sXPath, "handle-polar-pole-y");
assertXPathNoAttribute(pXmlDoc, sXPath, "handle-polar-angle");
assertXPathNoAttribute(pXmlDoc, sXPath, "handle-polar-radius");
}
// Test, that attribute is written in draw namespace with value 100% and in loext namespace with // value 122.0703125%.
SetODFDefaultVersion(SvtSaveOptions::ODFVER_013_EXTENDED); // As of Nov 2024, validating against a version other than LATEST is not implemented.
skipValidation();
saveAndReload(u"writer8"_ustr);
// The file has c3DSpecularAmt="80000" which results internally in specularity=122%.
SetODFDefaultVersion(SvtSaveOptions::ODFVER_014);
save(u"writer8"_ustr);
xmlDocUniquePtr pXmlDoc = parseExport(u"content.xml"_ustr);
assertXPath(pXmlDoc, "//draw:enhanced-geometry[@draw:extrusion-specularity='122.0703125%']");
// Save to ODF 1.3 strict and make sure draw:extrusion-specularity="100%" is written and // loext:extrusion-specularity is not written. // As of Nov 2024, validating against a version other than LATEST is not implemented.
skipValidation();
SetODFDefaultVersion(SvtSaveOptions::ODFVER_013);
save(u"writer8"_ustr);
pXmlDoc = parseExport(u"content.xml"_ustr);
assertXPath(pXmlDoc, "//draw:enhanced-geometry[@loext:extrusion-specularity]", 0);
assertXPath(pXmlDoc, "//draw:enhanced-geometry[@draw:extrusion-specularity='100%']");
}
for (beans::PropertyValue const& rProp : aPathProps)
{ if (rProp.Name == "Segments")
{
rProp.Value >>= rSegments; break;
}
} if (rSegments.getLength() > 2) returntrue; else returnfalse;
}
}
CPPUNIT_TEST_FIXTURE(XmloffDrawTest, testTdf148714_CurvedArrowsOld)
{ // Load a document with CurveArrow shapes with faulty path as written by older LO versions.
loadFromFile(u"tdf148714_CurvedArrowsOld.odp");
// Make sure, that the error has been corrected on opening. for (sal_Int32 nShapeIndex = 0; nShapeIndex < 4; nShapeIndex++)
{
uno::Reference<drawing::XShape> xShape(getShape(nShapeIndex));
uno::Sequence<drawing::EnhancedCustomShapeSegment> aSegments;
CPPUNIT_ASSERT(lcl_getShapeSegments(aSegments, xShape));
if (nShapeIndex == 0 || nShapeIndex == 3)
{ // curvedDownArrow or curvedLeftArrow. Segments should start with VW. Without fix it was // V with count 2, which means VV.
CPPUNIT_ASSERT_EQUAL(
sal_Int16(drawing::EnhancedCustomShapeSegmentCommand::CLOCKWISEARC),
aSegments[0].Command);
CPPUNIT_ASSERT_EQUAL(sal_Int16(1), aSegments[0].Count);
CPPUNIT_ASSERT_EQUAL(
sal_Int16(drawing::EnhancedCustomShapeSegmentCommand::CLOCKWISEARCTO),
aSegments[1].Command);
CPPUNIT_ASSERT_EQUAL(sal_Int16(1), aSegments[1].Count);
} else
{ // curvedUpArrow or curvedRightArrow. Segments should start with BA. Without fix is was // B with count 2, which means BB.
CPPUNIT_ASSERT_EQUAL(sal_Int16(drawing::EnhancedCustomShapeSegmentCommand::ARC),
aSegments[0].Command);
CPPUNIT_ASSERT_EQUAL(sal_Int16(1), aSegments[0].Count);
CPPUNIT_ASSERT_EQUAL(sal_Int16(drawing::EnhancedCustomShapeSegmentCommand::ARCTO),
aSegments[1].Command);
CPPUNIT_ASSERT_EQUAL(sal_Int16(1), aSegments[1].Count);
}
}
}
CPPUNIT_TEST_FIXTURE(XmloffDrawTest, testTextRotationPlusPre)
{
loadFromFile(u"tdf149551_verticalText.pptx"); // The file has a shape with attribute vert="vert" in <bodyPr> element. That generates a // TextPreRotateAngle attribute in CustomShapeGeometry.
// Save to ODF. Without the fix, a file format error was produced, because attribute // draw:text-rotate-angle was written twice, one from TextPreRotateAngle and the other from // TextRotateAngle. // This should already catch the format error, but does not, see tdf#149567 // But reload catches it.
saveAndReload(u"writer8"_ustr);
}
CPPUNIT_TEST_FIXTURE(XmloffDrawTest, testTdf156975_ThemeExport)
{ // It tests, that a theme is written to master page in Draw documents. // Without fix for tdf#156975 it was not written at all. // The test needs to be adapted, when themes are available in ODF.
loadFromURL(u"private:factory/sdraw"_ustr); // generate a theme to be sure we have got one and know the values
uno::Reference<drawing::XDrawPagesSupplier> xDrawPagesSupplier(mxComponent, uno::UNO_QUERY);
uno::Reference<drawing::XMasterPageTarget> xDrawPage(
xDrawPagesSupplier->getDrawPages()->getByIndex(0), uno::UNO_QUERY);
uno::Reference<beans::XPropertySet> xMasterPageProps(xDrawPage->getMasterPage(),
uno::UNO_QUERY);
CPPUNIT_TEST_FIXTURE(XmloffDrawTest, testTdf157018_ThemeImportDraw)
{ // Similar to testThemeImport but for Draw. // Load document with custom color theme
loadFromFile(u"tdf157018_CustomTheme.fodg");
// First make sure the doc model has a master page with a theme:
uno::Reference<drawing::XDrawPagesSupplier> xDrawPagesSupplier(mxComponent, uno::UNO_QUERY);
uno::Reference<drawing::XMasterPageTarget> xDrawPage(
xDrawPagesSupplier->getDrawPages()->getByIndex(0), uno::UNO_QUERY);
uno::Reference<beans::XPropertySet> xMasterpage(xDrawPage->getMasterPage(), uno::UNO_QUERY);
// Then make sure it is the custom color theme auto* pUnoTheme = dynamic_cast<UnoTheme*>(xTheme.get());
CPPUNIT_ASSERT(pUnoTheme); auto pTheme = pUnoTheme->getTheme();
CPPUNIT_ASSERT(pTheme);
CPPUNIT_ASSERT_EQUAL(u"Custom"_ustr, pTheme->GetName()); auto pColorSet = pTheme->getColorSet();
CPPUNIT_ASSERT(pColorSet);
CPPUNIT_ASSERT_EQUAL(u"My Colors"_ustr, pColorSet->getName());
// and test some colors
CPPUNIT_ASSERT_EQUAL(Color(0xFFFF11), pColorSet->getColor(model::ThemeColorType::Light1));
CPPUNIT_ASSERT_EQUAL(Color(0x0A0A0A), pColorSet->getColor(model::ThemeColorType::Hyperlink));
CPPUNIT_ASSERT_EQUAL(Color(0x440000), pColorSet->getColor(model::ThemeColorType::Accent1));
}
CPPUNIT_TEST_FIXTURE(XmloffDrawTest, test_scene3d_ooxml_light)
{ // The document has a shape in 3D mode. The import of ooxml light rigs can produce light // levels outside the 0..100 range allowed in ODF. Such high levels are needed for rendering // similar to MS Office.
loadFromFile(u"Scene3d_LightRig_threePt.pptx");
// Without fix this would have failed with validation error.
save(u"impress8"_ustr);
}
CPPUNIT_TEST_FIXTURE(XmloffDrawTest, testTdf161327_LatheEndAngle)
{ // Load document with 3D-Scene with 4 rotation objects
loadFromFile(u"tdf161327_LatheEndAngle.fodg");
// get scene object
uno::Reference<drawing::XShape> xSceneShape(getShape(0)); static constexpr OUString sExpected(u"com.sun.star.drawing.Shape3DSceneObject"_ustr);
CPPUNIT_ASSERT_EQUAL(sExpected, xSceneShape->getShapeType());
// Examine child objects // [0] dr3d:end-angle="1512" // [1] dr3d:end-angle="151.2deg" // [2] dr3d:end-angle="168.0grad" // [3] dr3d:end-angle="2.638937829015430rad" // All cases should result in D3DEndAngle = 1512. Without fix, cases [1], [2] and [3] // could not be read and default 3600 was used, although the values are valid in ODF. for (size_t i = 0; i < 4; ++i)
{
uno::Reference<container::XIndexAccess> xGroup(xSceneShape, uno::UNO_QUERY);
uno::Reference<drawing::XShape> xShape(xGroup->getByIndex(i), uno::UNO_QUERY);
uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY);
sal_Int16 nEndAngle;
xShapeProps->getPropertyValue(u"D3DEndAngle"_ustr) >>= nEndAngle;
CPPUNIT_ASSERT_EQUAL(sal_Int16(1512), nEndAngle);
}
}
CPPUNIT_TEST_FIXTURE(XmloffDrawTest, testTdf161327_HatchAngle)
{ // Load document with four rectangles with linear hatch background fill
loadFromFile(u"tdf161327_HatchAngle.fodg");
// The hatch angle is given in file as // [0] 585 unit less // [1] 58.5deg, // [2] 65grad, // [3] 1.01201761241668rad // The resulting angle should be 585 (meaning 1/10 of a degree) in all cases. // Cases [1], [2] and [3] had angle 0 without fix. for (size_t i = 0; i < 4; ++i)
{
uno::Reference<drawing::XShape> xShape(getShape(i));
uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY);
constexpr css::drawing::FillStyle eExpectedStyle = css::drawing::FillStyle_HATCH;
css::drawing::FillStyle aActualStyle;
xShapeProps->getPropertyValue(u"FillStyle"_ustr) >>= aActualStyle;
CPPUNIT_ASSERT_EQUAL(eExpectedStyle, aActualStyle);
sal_Int32 nExpectedAngle = 585; // FillHatch.Angle has data type 'long'
css::drawing::Hatch aActualHatch;
xShapeProps->getPropertyValue(u"FillHatch"_ustr) >>= aActualHatch;
CPPUNIT_ASSERT_EQUAL(nExpectedAngle, aActualHatch.Angle);
}
}
CPPUNIT_TEST_FIXTURE(XmloffDrawTest, testTdf161483_ShadowSlant)
{ // Load document with four 3D-scenes, that differ in the draw:shadow-slant value
loadFromFile(u"tdf161483_ShadowSlant.fodg");
// The shadow-slant angle is given in file as // [0] 36 unitless // [1] 36deg, // [2] 40grad, // [3] 1.628318530717959rad // The resulting angle should be 36 in all cases. // Cases [1], [2] and [3] had angle 0 without fix.
constexpr sal_Int16 nExpectedAngle = 36; // D3DSceneShadowSlant has data type 'short' for (size_t i = 0; i < 4; ++i)
{
uno::Reference<drawing::XShape> xShape(getShape(i));
uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY);
sal_Int16 nActualAngle;
xShapeProps->getPropertyValue(u"D3DSceneShadowSlant"_ustr) >>= nActualAngle;
CPPUNIT_ASSERT_EQUAL(nExpectedAngle, nActualAngle);
}
}
CPPUNIT_TEST_FIXTURE(XmloffDrawTest, testTdf161483_CircleStartEndAngle)
{ // Load document with four 'Arc' shapes, which differ in the type of start and end angles
loadFromFile(u"tdf161483_CircleStartEndAngle.fodg");
// The start and end angles are given in file as // [0] unitless: start 337.5 end 306 // [1] deg: start 337.5deg end 306deg // [2] grad: start 375grad end 340grad // [3] rad: start 5.89048622548086rad end 5.34070751110265rad // The resulting angle should be 33750 and 30600 in all cases.
// CircleStartAngle and CircleEndAngle have data type 'long', meaning Degree100
constexpr sal_Int32 nExpectedStartAngle = 33750;
constexpr sal_Int32 nExpectedEndAngle = 30600; for (size_t i = 0; i < 4; ++i)
{
uno::Reference<drawing::XShape> xShape(getShape(i));
uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY);
sal_Int32 nActualStartAngle;
xShapeProps->getPropertyValue(u"CircleStartAngle"_ustr) >>= nActualStartAngle;
CPPUNIT_ASSERT_EQUAL(nExpectedStartAngle, nActualStartAngle);
sal_Int32 nActualEndAngle;
xShapeProps->getPropertyValue(u"CircleEndAngle"_ustr) >>= nActualEndAngle;
CPPUNIT_ASSERT_EQUAL(nExpectedEndAngle, nActualEndAngle);
}
}
CPPUNIT_TEST_FIXTURE(XmloffDrawTest, testPdfExportAsOdg)
{ auto pPdfium = vcl::pdf::PDFiumLibrary::get(); if (!pPdfium)
{ return;
}
// We need to enable PDFium import (and make sure to disable after the test) bool bResetEnvVar = false; if (getenv("LO_IMPORT_USE_PDFIUM") == nullptr)
{
bResetEnvVar = true;
osl_setEnvironment(OUString("LO_IMPORT_USE_PDFIUM").pData, OUString("1").pData);
}
comphelper::ScopeGuard aPDFiumEnvVarGuard([&]() { if (bResetEnvVar)
osl_clearEnvironment(OUString("LO_IMPORT_USE_PDFIUM").pData);
});
loadFromFile(u"two-pages.pdf"); // save and reload as odg
saveAndReload("draw8");
// Check that the graphic in the second page of the document is the second page of the pdf
uno::Reference<drawing::XDrawPagesSupplier> xDrawPagesSupplier(mxComponent,
uno::UNO_QUERY_THROW);
CPPUNIT_ASSERT(xDrawPagesSupplier.is());
uno::Reference<drawing::XDrawPages> xDrawPages(xDrawPagesSupplier->getDrawPages());
uno::Reference<drawing::XDrawPage> xDrawPage(xDrawPages->getByIndex(1), uno::UNO_QUERY_THROW);
uno::Reference<drawing::XShape> xImage(xDrawPage->getByIndex(0), uno::UNO_QUERY_THROW);
CPPUNIT_ASSERT(xImage.is());
uno::Reference<beans::XPropertySet> xShapeProps(xImage, uno::UNO_QUERY);
uno::Reference<graphic::XGraphic> xGraphic;
CPPUNIT_ASSERT(xShapeProps->getPropertyValue("Graphic") >>= xGraphic);
Graphic aGraphic(xGraphic); // Without the accompanying fix in place, this test would have failed with: // - Expected: 1 // - Actual : -1
CPPUNIT_ASSERT_EQUAL(sal_Int32(1), aGraphic.getPageNumber());
}
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.
