Eine aufbereitete Darstellung der Quelle

 
     
 
 
Anforderungen  |   Konzepte  |   Entwurf  |   Entwicklung  |   Qualitätssicherung  |   Lebenszyklus  |   Steuerung
 
 
 
 

Benutzer

 tsl2563.c   Interaktion und
Portierbarkeitunbekannt

 
// SPDX-License-Identifier: GPL-2.0-only
/*
 * drivers/iio/light/tsl2563.c
 *
 * Copyright (C) 2008 Nokia Corporation
 *
 * Written by Timo O. Karjalainen <timo.o.karjalainen@nokia.com>
 * Contact: Amit Kucheria <amit.kucheria@verdurent.com>
 *
 * Converted to IIO driver
 * Amit Kucheria <amit.kucheria@verdurent.com>
 */


#include <linux/bits.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/math.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/pm.h>
#include <linux/property.h>
#include <linux/sched.h>
#include <linux/slab.h>

#include <linux/iio/events.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>

/* Use this many bits for fraction part. */
#define ADC_FRAC_BITS  14

/* Given number of 1/10000's in ADC_FRAC_BITS precision. */
#define FRAC10K(f)  (((f) * BIT(ADC_FRAC_BITS)) / (10000))

/* Bits used for fraction in calibration coefficients.*/
#define CALIB_FRAC_BITS  10
/* Decimal 10^(digits in sysfs presentation) */
#define CALIB_BASE_SYSFS 1000

#define TSL2563_CMD  BIT(7)
#define TSL2563_CLEARINT BIT(6)

#define TSL2563_REG_CTRL 0x00
#define TSL2563_REG_TIMING 0x01
#define TSL2563_REG_LOW  0x02 /* data0 low threshold, 2 bytes */
#define TSL2563_REG_HIGH 0x04 /* data0 high threshold, 2 bytes */
#define TSL2563_REG_INT  0x06
#define TSL2563_REG_ID  0x0a
#define TSL2563_REG_DATA0 0x0c /* broadband sensor value, 2 bytes */
#define TSL2563_REG_DATA1 0x0e /* infrared sensor value, 2 bytes */

#define TSL2563_CMD_POWER_ON 0x03
#define TSL2563_CMD_POWER_OFF 0x00
#define TSL2563_CTRL_POWER_MASK GENMASK(10)

#define TSL2563_TIMING_13MS 0x00
#define TSL2563_TIMING_100MS 0x01
#define TSL2563_TIMING_400MS 0x02
#define TSL2563_TIMING_MASK GENMASK(10)
#define TSL2563_TIMING_GAIN16 0x10
#define TSL2563_TIMING_GAIN1 0x00

#define TSL2563_INT_DISABLED 0x00
#define TSL2563_INT_LEVEL 0x10
#define TSL2563_INT_MASK GENMASK(54)
#define TSL2563_INT_PERSIST(n) ((n) & GENMASK(30))

struct tsl2563_gainlevel_coeff {
 u8 gaintime;
 u16 min;
 u16 max;
};

static const struct tsl2563_gainlevel_coeff tsl2563_gainlevel_table[] = {
 {
  .gaintime = TSL2563_TIMING_400MS | TSL2563_TIMING_GAIN16,
  .min  = 0,
  .max  = 65534,
 }, {
  .gaintime = TSL2563_TIMING_400MS | TSL2563_TIMING_GAIN1,
  .min  = 2048,
  .max  = 65534,
 }, {
  .gaintime = TSL2563_TIMING_100MS | TSL2563_TIMING_GAIN1,
  .min  = 4095,
  .max  = 37177,
 }, {
  .gaintime = TSL2563_TIMING_13MS | TSL2563_TIMING_GAIN1,
  .min  = 3000,
  .max  = 65535,
 },
};

struct tsl2563_chip {
 struct mutex  lock;
 struct i2c_client *client;
 struct delayed_work poweroff_work;

 /* Remember state for suspend and resume functions */
 bool suspended;

 struct tsl2563_gainlevel_coeff const *gainlevel;

 u16   low_thres;
 u16   high_thres;
 u8   intr;
 bool   int_enabled;

 /* Calibration coefficients */
 u32   calib0;
 u32   calib1;
 int   cover_comp_gain;

 /* Cache current values, to be returned while suspended */
 u32   data0;
 u32   data1;
};

static int tsl2563_set_power(struct tsl2563_chip *chip, int on)
{
 struct i2c_client *client = chip->client;
 u8 cmd;

 cmd = on ? TSL2563_CMD_POWER_ON : TSL2563_CMD_POWER_OFF;
 return i2c_smbus_write_byte_data(client,
      TSL2563_CMD | TSL2563_REG_CTRL, cmd);
}

/*
 * Return value is 0 for off, 1 for on, or a negative error
 * code if reading failed.
 */

static int tsl2563_get_power(struct tsl2563_chip *chip)
{
 struct i2c_client *client = chip->client;
 int ret;

 ret = i2c_smbus_read_byte_data(client, TSL2563_CMD | TSL2563_REG_CTRL);
 if (ret < 0)
  return ret;

 return (ret & TSL2563_CTRL_POWER_MASK) == TSL2563_CMD_POWER_ON;
}

static int tsl2563_configure(struct tsl2563_chip *chip)
{
 int ret;

 ret = i2c_smbus_write_byte_data(chip->client,
   TSL2563_CMD | TSL2563_REG_TIMING,
   chip->gainlevel->gaintime);
 if (ret)
  goto error_ret;
 ret = i2c_smbus_write_word_data(chip->client,
   TSL2563_CMD | TSL2563_REG_HIGH,
   chip->high_thres);
 if (ret)
  goto error_ret;
 ret = i2c_smbus_write_word_data(chip->client,
   TSL2563_CMD | TSL2563_REG_LOW,
   chip->low_thres);
 if (ret)
  goto error_ret;
/*
 * Interrupt register is automatically written anyway if it is relevant
 * so is not here.
 */

error_ret:
 return ret;
}

static void tsl2563_poweroff_work(struct work_struct *work)
{
 struct tsl2563_chip *chip =
  container_of(work, struct tsl2563_chip, poweroff_work.work);
 tsl2563_set_power(chip, 0);
}

static int tsl2563_detect(struct tsl2563_chip *chip)
{
 int ret;

 ret = tsl2563_set_power(chip, 1);
 if (ret)
  return ret;

 ret = tsl2563_get_power(chip);
 if (ret < 0)
  return ret;

 return ret ? 0 : -ENODEV;
}

static int tsl2563_read_id(struct tsl2563_chip *chip, u8 *id)
{
 struct i2c_client *client = chip->client;
 int ret;

 ret = i2c_smbus_read_byte_data(client, TSL2563_CMD | TSL2563_REG_ID);
 if (ret < 0)
  return ret;

 *id = ret;

 return 0;
}

static int tsl2563_configure_irq(struct tsl2563_chip *chip, bool enable)
{
 int ret;

 chip->intr &= ~TSL2563_INT_MASK;
 if (enable)
  chip->intr |= TSL2563_INT_LEVEL;

 ret = i2c_smbus_write_byte_data(chip->client,
     TSL2563_CMD | TSL2563_REG_INT,
     chip->intr);
 if (ret < 0)
  return ret;

 chip->int_enabled = enable;
 return 0;
}

/*
 * "Normalized" ADC value is one obtained with 400ms of integration time and
 * 16x gain. This function returns the number of bits of shift needed to
 * convert between normalized values and HW values obtained using given
 * timing and gain settings.
 */

static int tsl2563_adc_shiftbits(u8 timing)
{
 int shift = 0;

 switch (timing & TSL2563_TIMING_MASK) {
 case TSL2563_TIMING_13MS:
  shift += 5;
  break;
 case TSL2563_TIMING_100MS:
  shift += 2;
  break;
 case TSL2563_TIMING_400MS:
  /* no-op */
  break;
 }

 if (!(timing & TSL2563_TIMING_GAIN16))
  shift += 4;

 return shift;
}

/* Convert a HW ADC value to normalized scale. */
static u32 tsl2563_normalize_adc(u16 adc, u8 timing)
{
 return adc << tsl2563_adc_shiftbits(timing);
}

static void tsl2563_wait_adc(struct tsl2563_chip *chip)
{
 unsigned int delay;

 switch (chip->gainlevel->gaintime & TSL2563_TIMING_MASK) {
 case TSL2563_TIMING_13MS:
  delay = 14;
  break;
 case TSL2563_TIMING_100MS:
  delay = 101;
  break;
 default:
  delay = 402;
 }
 /*
 * TODO: Make sure that we wait at least required delay but why we
 * have to extend it one tick more?
 */

 schedule_timeout_interruptible(msecs_to_jiffies(delay) + 2);
}

static int tsl2563_adjust_gainlevel(struct tsl2563_chip *chip, u16 adc)
{
 struct i2c_client *client = chip->client;

 if (adc > chip->gainlevel->max || adc < chip->gainlevel->min) {

  (adc > chip->gainlevel->max) ?
   chip->gainlevel++ : chip->gainlevel--;

  i2c_smbus_write_byte_data(client,
       TSL2563_CMD | TSL2563_REG_TIMING,
       chip->gainlevel->gaintime);

  tsl2563_wait_adc(chip);
  tsl2563_wait_adc(chip);

  return 1;
 } else
  return 0;
}

static int tsl2563_get_adc(struct tsl2563_chip *chip)
{
 struct i2c_client *client = chip->client;
 u16 adc0, adc1;
 int retry = 1;
 int ret = 0;

 if (chip->suspended)
  goto out;

 if (!chip->int_enabled) {
  cancel_delayed_work_sync(&chip->poweroff_work);

  if (!tsl2563_get_power(chip)) {
   ret = tsl2563_set_power(chip, 1);
   if (ret)
    goto out;
   ret = tsl2563_configure(chip);
   if (ret)
    goto out;
   tsl2563_wait_adc(chip);
  }
 }

 while (retry) {
  ret = i2c_smbus_read_word_data(client,
    TSL2563_CMD | TSL2563_REG_DATA0);
  if (ret < 0)
   goto out;
  adc0 = ret;

  ret = i2c_smbus_read_word_data(client,
    TSL2563_CMD | TSL2563_REG_DATA1);
  if (ret < 0)
   goto out;
  adc1 = ret;

  retry = tsl2563_adjust_gainlevel(chip, adc0);
 }

 chip->data0 = tsl2563_normalize_adc(adc0, chip->gainlevel->gaintime);
 chip->data1 = tsl2563_normalize_adc(adc1, chip->gainlevel->gaintime);

 if (!chip->int_enabled)
  schedule_delayed_work(&chip->poweroff_work, 5 * HZ);

 ret = 0;
out:
 return ret;
}

static inline int tsl2563_calib_to_sysfs(u32 calib)
{
 return (int)DIV_ROUND_CLOSEST(calib * CALIB_BASE_SYSFS, BIT(CALIB_FRAC_BITS));
}

static inline u32 tsl2563_calib_from_sysfs(int value)
{
 /* Make a fraction from a number n that was multiplied with b. */
 return (((u32) value) << CALIB_FRAC_BITS) / CALIB_BASE_SYSFS;
}

/*
 * Conversions between lux and ADC values.
 *
 * The basic formula is lux = c0 * adc0 - c1 * adc1, where c0 and c1 are
 * appropriate constants. Different constants are needed for different
 * kinds of light, determined by the ratio adc1/adc0 (basically the ratio
 * of the intensities in infrared and visible wavelengths). lux_table below
 * lists the upper threshold of the adc1/adc0 ratio and the corresponding
 * constants.
 */


struct tsl2563_lux_coeff {
 unsigned long ch_ratio;
 unsigned long ch0_coeff;
 unsigned long ch1_coeff;
};

static const struct tsl2563_lux_coeff lux_table[] = {
 {
  .ch_ratio = FRAC10K(1300),
  .ch0_coeff = FRAC10K(315),
  .ch1_coeff = FRAC10K(262),
 }, {
  .ch_ratio = FRAC10K(2600),
  .ch0_coeff = FRAC10K(337),
  .ch1_coeff = FRAC10K(430),
 }, {
  .ch_ratio = FRAC10K(3900),
  .ch0_coeff = FRAC10K(363),
  .ch1_coeff = FRAC10K(529),
 }, {
  .ch_ratio = FRAC10K(5200),
  .ch0_coeff = FRAC10K(392),
  .ch1_coeff = FRAC10K(605),
 }, {
  .ch_ratio = FRAC10K(6500),
  .ch0_coeff = FRAC10K(229),
  .ch1_coeff = FRAC10K(291),
 }, {
  .ch_ratio = FRAC10K(8000),
  .ch0_coeff = FRAC10K(157),
  .ch1_coeff = FRAC10K(180),
 }, {
  .ch_ratio = FRAC10K(13000),
  .ch0_coeff = FRAC10K(34),
  .ch1_coeff = FRAC10K(26),
 }, {
  .ch_ratio = ULONG_MAX,
  .ch0_coeff = 0,
  .ch1_coeff = 0,
 },
};

/* Convert normalized, scaled ADC values to lux. */
static unsigned int tsl2563_adc_to_lux(u32 adc0, u32 adc1)
{
 const struct tsl2563_lux_coeff *lp = lux_table;
 unsigned long ratio, lux, ch0 = adc0, ch1 = adc1;

 ratio = ch0 ? ((ch1 << ADC_FRAC_BITS) / ch0) : ULONG_MAX;

 while (lp->ch_ratio < ratio)
  lp++;

 lux = ch0 * lp->ch0_coeff - ch1 * lp->ch1_coeff;

 return (unsigned int) (lux >> ADC_FRAC_BITS);
}

/* Apply calibration coefficient to ADC count. */
static u32 tsl2563_calib_adc(u32 adc, u32 calib)
{
 unsigned long scaled = adc;

 scaled *= calib;
 scaled >>= CALIB_FRAC_BITS;

 return (u32) scaled;
}

static int tsl2563_write_raw(struct iio_dev *indio_dev,
          struct iio_chan_spec const *chan,
          int val,
          int val2,
          long mask)
{
 struct tsl2563_chip *chip = iio_priv(indio_dev);

 if (mask != IIO_CHAN_INFO_CALIBSCALE)
  return -EINVAL;
 if (chan->channel2 == IIO_MOD_LIGHT_BOTH)
  chip->calib0 = tsl2563_calib_from_sysfs(val);
 else if (chan->channel2 == IIO_MOD_LIGHT_IR)
  chip->calib1 = tsl2563_calib_from_sysfs(val);
 else
  return -EINVAL;

 return 0;
}

static int tsl2563_read_raw(struct iio_dev *indio_dev,
       struct iio_chan_spec const *chan,
       int *val,
       int *val2,
       long mask)
{
 int ret = -EINVAL;
 u32 calib0, calib1;
 struct tsl2563_chip *chip = iio_priv(indio_dev);

 mutex_lock(&chip->lock);
 switch (mask) {
 case IIO_CHAN_INFO_RAW:
 case IIO_CHAN_INFO_PROCESSED:
  switch (chan->type) {
  case IIO_LIGHT:
   ret = tsl2563_get_adc(chip);
   if (ret)
    goto error_ret;
   calib0 = tsl2563_calib_adc(chip->data0, chip->calib0) *
    chip->cover_comp_gain;
   calib1 = tsl2563_calib_adc(chip->data1, chip->calib1) *
    chip->cover_comp_gain;
   *val = tsl2563_adc_to_lux(calib0, calib1);
   ret = IIO_VAL_INT;
   break;
  case IIO_INTENSITY:
   ret = tsl2563_get_adc(chip);
   if (ret)
    goto error_ret;
   if (chan->channel2 == IIO_MOD_LIGHT_BOTH)
    *val = chip->data0;
   else
    *val = chip->data1;
   ret = IIO_VAL_INT;
   break;
  default:
   break;
  }
  break;

 case IIO_CHAN_INFO_CALIBSCALE:
  if (chan->channel2 == IIO_MOD_LIGHT_BOTH)
   *val = tsl2563_calib_to_sysfs(chip->calib0);
  else
   *val = tsl2563_calib_to_sysfs(chip->calib1);
  ret = IIO_VAL_INT;
  break;
 default:
  ret = -EINVAL;
  goto error_ret;
 }

error_ret:
 mutex_unlock(&chip->lock);
 return ret;
}

static const struct iio_event_spec tsl2563_events[] = {
 {
  .type = IIO_EV_TYPE_THRESH,
  .dir = IIO_EV_DIR_RISING,
  .mask_separate = BIT(IIO_EV_INFO_VALUE) |
    BIT(IIO_EV_INFO_ENABLE),
 }, {
  .type = IIO_EV_TYPE_THRESH,
  .dir = IIO_EV_DIR_FALLING,
  .mask_separate = BIT(IIO_EV_INFO_VALUE) |
    BIT(IIO_EV_INFO_ENABLE),
 },
};

static const struct iio_chan_spec tsl2563_channels[] = {
 {
  .type = IIO_LIGHT,
  .indexed = 1,
  .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
  .channel = 0,
 }, {
  .type = IIO_INTENSITY,
  .modified = 1,
  .channel2 = IIO_MOD_LIGHT_BOTH,
  .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
  BIT(IIO_CHAN_INFO_CALIBSCALE),
  .event_spec = tsl2563_events,
  .num_event_specs = ARRAY_SIZE(tsl2563_events),
 }, {
  .type = IIO_INTENSITY,
  .modified = 1,
  .channel2 = IIO_MOD_LIGHT_IR,
  .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
  BIT(IIO_CHAN_INFO_CALIBSCALE),
 }
};

static int tsl2563_read_thresh(struct iio_dev *indio_dev,
 const struct iio_chan_spec *chan, enum iio_event_type type,
 enum iio_event_direction dir, enum iio_event_info info, int *val,
 int *val2)
{
 struct tsl2563_chip *chip = iio_priv(indio_dev);

 switch (dir) {
 case IIO_EV_DIR_RISING:
  *val = chip->high_thres;
  break;
 case IIO_EV_DIR_FALLING:
  *val = chip->low_thres;
  break;
 default:
  return -EINVAL;
 }

 return IIO_VAL_INT;
}

static int tsl2563_write_thresh(struct iio_dev *indio_dev,
 const struct iio_chan_spec *chan, enum iio_event_type type,
 enum iio_event_direction dir, enum iio_event_info info, int val,
 int val2)
{
 struct tsl2563_chip *chip = iio_priv(indio_dev);
 int ret;

 mutex_lock(&chip->lock);

 if (dir == IIO_EV_DIR_RISING)
  ret = i2c_smbus_write_word_data(chip->client,
      TSL2563_CMD | TSL2563_REG_HIGH, val);
 else
  ret = i2c_smbus_write_word_data(chip->client,
      TSL2563_CMD | TSL2563_REG_LOW, val);
 if (ret)
  goto error_ret;

 if (dir == IIO_EV_DIR_RISING)
  chip->high_thres = val;
 else
  chip->low_thres = val;

error_ret:
 mutex_unlock(&chip->lock);

 return ret;
}

static irqreturn_t tsl2563_event_handler(int irq, void *private)
{
 struct iio_dev *dev_info = private;
 struct tsl2563_chip *chip = iio_priv(dev_info);

 iio_push_event(dev_info,
         IIO_UNMOD_EVENT_CODE(IIO_INTENSITY,
         0,
         IIO_EV_TYPE_THRESH,
         IIO_EV_DIR_EITHER),
         iio_get_time_ns(dev_info));

 /* clear the interrupt and push the event */
 i2c_smbus_write_byte(chip->client, TSL2563_CMD | TSL2563_CLEARINT);
 return IRQ_HANDLED;
}

static int tsl2563_write_interrupt_config(struct iio_dev *indio_dev,
 const struct iio_chan_spec *chan, enum iio_event_type type,
 enum iio_event_direction dir, bool state)
{
 struct tsl2563_chip *chip = iio_priv(indio_dev);
 int ret = 0;

 mutex_lock(&chip->lock);
 if (state && !(chip->intr & TSL2563_INT_MASK)) {
  /* ensure the chip is actually on */
  cancel_delayed_work_sync(&chip->poweroff_work);
  if (!tsl2563_get_power(chip)) {
   ret = tsl2563_set_power(chip, 1);
   if (ret)
    goto out;
   ret = tsl2563_configure(chip);
   if (ret)
    goto out;
  }
  ret = tsl2563_configure_irq(chip, true);
 }

 if (!state && (chip->intr & TSL2563_INT_MASK)) {
  ret = tsl2563_configure_irq(chip, false);
  /* now the interrupt is not enabled, we can go to sleep */
  schedule_delayed_work(&chip->poweroff_work, 5 * HZ);
 }
out:
 mutex_unlock(&chip->lock);

 return ret;
}

static int tsl2563_read_interrupt_config(struct iio_dev *indio_dev,
 const struct iio_chan_spec *chan, enum iio_event_type type,
 enum iio_event_direction dir)
{
 struct tsl2563_chip *chip = iio_priv(indio_dev);
 int ret;

 mutex_lock(&chip->lock);
 ret = i2c_smbus_read_byte_data(chip->client,
           TSL2563_CMD | TSL2563_REG_INT);
 mutex_unlock(&chip->lock);
 if (ret < 0)
  return ret;

 return !!(ret & TSL2563_INT_MASK);
}

static const struct iio_info tsl2563_info_no_irq = {
 .read_raw = &tsl2563_read_raw,
 .write_raw = &tsl2563_write_raw,
};

static const struct iio_info tsl2563_info = {
 .read_raw = &tsl2563_read_raw,
 .write_raw = &tsl2563_write_raw,
 .read_event_value = &tsl2563_read_thresh,
 .write_event_value = &tsl2563_write_thresh,
 .read_event_config = &tsl2563_read_interrupt_config,
 .write_event_config = &tsl2563_write_interrupt_config,
};

static int tsl2563_probe(struct i2c_client *client)
{
 struct device *dev = &client->dev;
 struct iio_dev *indio_dev;
 struct tsl2563_chip *chip;
 unsigned long irq_flags;
 u8 id = 0;
 int err;

 indio_dev = devm_iio_device_alloc(dev, sizeof(*chip));
 if (!indio_dev)
  return -ENOMEM;

 chip = iio_priv(indio_dev);

 i2c_set_clientdata(client, indio_dev);
 chip->client = client;

 err = tsl2563_detect(chip);
 if (err)
  return dev_err_probe(dev, err, "detect error\n");

 err = tsl2563_read_id(chip, &id);
 if (err)
  return dev_err_probe(dev, err, "read id error\n");

 mutex_init(&chip->lock);

 /* Default values used until userspace says otherwise */
 chip->low_thres = 0x0;
 chip->high_thres = 0xffff;
 chip->gainlevel = tsl2563_gainlevel_table;
 chip->intr = TSL2563_INT_PERSIST(4);
 chip->calib0 = tsl2563_calib_from_sysfs(CALIB_BASE_SYSFS);
 chip->calib1 = tsl2563_calib_from_sysfs(CALIB_BASE_SYSFS);

 chip->cover_comp_gain = 1;
 device_property_read_u32(dev, "amstaos,cover-comp-gain", &chip->cover_comp_gain);

 dev_info(dev, "model %d, rev. %d\n", id >> 4, id & 0x0f);
 indio_dev->name = client->name;
 indio_dev->channels = tsl2563_channels;
 indio_dev->num_channels = ARRAY_SIZE(tsl2563_channels);
 indio_dev->modes = INDIO_DIRECT_MODE;

 if (client->irq)
  indio_dev->info = &tsl2563_info;
 else
  indio_dev->info = &tsl2563_info_no_irq;

 if (client->irq) {
  irq_flags = irq_get_trigger_type(client->irq);
  if (irq_flags == IRQF_TRIGGER_NONE)
   irq_flags = IRQF_TRIGGER_RISING;
  irq_flags |= IRQF_ONESHOT;

  err = devm_request_threaded_irq(dev, client->irq,
        NULL,
        &tsl2563_event_handler,
        irq_flags,
        "tsl2563_event",
        indio_dev);
  if (err)
   return dev_err_probe(dev, err, "irq request error\n");
 }

 err = tsl2563_configure(chip);
 if (err)
  return dev_err_probe(dev, err, "configure error\n");

 INIT_DELAYED_WORK(&chip->poweroff_work, tsl2563_poweroff_work);

 /* The interrupt cannot yet be enabled so this is fine without lock */
 schedule_delayed_work(&chip->poweroff_work, 5 * HZ);

 err = iio_device_register(indio_dev);
 if (err) {
  dev_err_probe(dev, err, "iio registration error\n");
  goto fail;
 }

 return 0;

fail:
 cancel_delayed_work_sync(&chip->poweroff_work);
 return err;
}

static void tsl2563_remove(struct i2c_client *client)
{
 struct iio_dev *indio_dev = i2c_get_clientdata(client);
 struct tsl2563_chip *chip = iio_priv(indio_dev);

 iio_device_unregister(indio_dev);
 if (!chip->int_enabled)
  cancel_delayed_work_sync(&chip->poweroff_work);
 /* Ensure that interrupts are disabled - then flush any bottom halves */
 tsl2563_configure_irq(chip, false);
 tsl2563_set_power(chip, 0);
}

static int tsl2563_suspend(struct device *dev)
{
 struct iio_dev *indio_dev = dev_get_drvdata(dev);
 struct tsl2563_chip *chip = iio_priv(indio_dev);
 int ret;

 mutex_lock(&chip->lock);

 ret = tsl2563_set_power(chip, 0);
 if (ret)
  goto out;

 chip->suspended = true;

out:
 mutex_unlock(&chip->lock);
 return ret;
}

static int tsl2563_resume(struct device *dev)
{
 struct iio_dev *indio_dev = dev_get_drvdata(dev);
 struct tsl2563_chip *chip = iio_priv(indio_dev);
 int ret;

 mutex_lock(&chip->lock);

 ret = tsl2563_set_power(chip, 1);
 if (ret)
  goto out;

 ret = tsl2563_configure(chip);
 if (ret)
  goto out;

 chip->suspended = false;

out:
 mutex_unlock(&chip->lock);
 return ret;
}

static DEFINE_SIMPLE_DEV_PM_OPS(tsl2563_pm_ops, tsl2563_suspend,
    tsl2563_resume);

static const struct i2c_device_id tsl2563_id[] = {
 { "tsl2560"0 },
 { "tsl2561"1 },
 { "tsl2562"2 },
 { "tsl2563"3 },
 { }
};
MODULE_DEVICE_TABLE(i2c, tsl2563_id);

static const struct of_device_id tsl2563_of_match[] = {
 { .compatible = "amstaos,tsl2560" },
 { .compatible = "amstaos,tsl2561" },
 { .compatible = "amstaos,tsl2562" },
 { .compatible = "amstaos,tsl2563" },
 { }
};
MODULE_DEVICE_TABLE(of, tsl2563_of_match);

static struct i2c_driver tsl2563_i2c_driver = {
 .driver = {
  .name  = "tsl2563",
  .of_match_table = tsl2563_of_match,
  .pm = pm_sleep_ptr(&tsl2563_pm_ops),
 },
 .probe  = tsl2563_probe,
 .remove  = tsl2563_remove,
 .id_table = tsl2563_id,
};
module_i2c_driver(tsl2563_i2c_driver);

MODULE_AUTHOR("Nokia Corporation");
MODULE_DESCRIPTION("tsl2563 light sensor driver");
MODULE_LICENSE("GPL");

Messung V0.5 in Prozent
C=93 H=94 G=93

[Verzeichnis aufwärts0.20unsichere VerbindungÜbersetzung europäischer Sprachen durch Browser2026-06-05]

                                                                                                                                                                                                                                                                                                                                                                                                     


Neuigkeiten

     Aktuelles
     Motto des Tages

Open Source Software

     Quellcodebibliothek
     Eigene Quellcodes
     Fremde Quellcodes
     Suchen

Jenseits des Üblichen ....

Besucherstatistik

Besucherstatistik

Statistik
#Sources=277311
#Domains=752002