Spracherkennung für: .dts vermutete Sprache: Unknown {[0] [0] [0]} [Methode: Schwerpunktbildung, einfache Gewichte, sechs Dimensionen]
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include "aspeed-g5.dtsi"
#include <dt-bindings/gpio/aspeed-gpio.h>
/ {
model = "Zaius BMC";
compatible = "ingrasys,zaius-bmc", "aspeed,ast2500";
aliases {
i2c15 = &i2cpcie0;
i2c16 = &i2cpcie1;
i2c17 = &i2cpcie2;
i2c19 = &i2cpcie3;
i2c20 = &i2cpcie4;
};
chosen {
stdout-path = &uart5;
bootargs = "console=ttyS4,115200 earlycon";
};
memory@80000000 {
reg = <0x80000000 0x40000000>;
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
flash_memory: region@98000000 {
no-map;
reg = <0x98000000 0x04000000>; /* 64M */
};
};
onewire0 {
compatible = "w1-gpio";
gpios = <&gpio ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
};
onewire1 {
compatible = "w1-gpio";
gpios = <&gpio ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
};
onewire2 {
compatible = "w1-gpio";
gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
};
onewire3 {
compatible = "w1-gpio";
gpios = <&gpio ASPEED_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
};
gpio-keys {
compatible = "gpio-keys";
event-checkstop {
label = "checkstop";
gpios = <&gpio ASPEED_GPIO(F, 7) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(F, 7)>;
};
event-pcie-e2b-present{
label = "pcie-e2b-present";
gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(E, 7)>;
};
};
leds {
compatible = "gpio-leds";
sys_boot_status {
label = "System boot status";
gpios = <&gpio ASPEED_GPIO(D, 5) GPIO_ACTIVE_LOW>;
};
attention {
label = "Attention";
gpios = <&gpio ASPEED_GPIO(D, 6) GPIO_ACTIVE_LOW>;
};
plt_fault {
label = "Platform fault";
gpios = <&gpio ASPEED_GPIO(D, 7) GPIO_ACTIVE_LOW>;
};
hdd_fault {
label = "Onboard drive fault";
gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>;
};
};
fsi: gpio-fsi {
compatible = "fsi-master-gpio", "fsi-master";
#address-cells = <2>;
#size-cells = <0>;
no-gpio-delays;
trans-gpios = <&gpio ASPEED_GPIO(O, 6) GPIO_ACTIVE_HIGH>;
enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
clock-gpios = <&gpio ASPEED_GPIO(G, 0) GPIO_ACTIVE_HIGH>;
data-gpios = <&gpio ASPEED_GPIO(G, 1) GPIO_ACTIVE_HIGH>;
mux-gpios = <&gpio ASPEED_GPIO(P, 6) GPIO_ACTIVE_HIGH>;
};
iio-hwmon {
compatible = "iio-hwmon";
io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
<&adc 13>, <&adc 14>, <&adc 15>;
};
iio-hwmon-battery {
compatible = "iio-hwmon";
io-channels = <&adc 12>;
};
};
&fmc {
status = "okay";
flash@0 {
status = "okay";
label = "bmc";
m25p,fast-read;
spi-max-frequency = <50000000>;
#include "openbmc-flash-layout.dtsi"
};
};
&spi1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1_default>;
flash@0 {
status = "okay";
label = "pnor";
m25p,fast-read;
spi-max-frequency = <100000000>;
};
};
&spi2 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi2ck_default
&pinctrl_spi2cs0_default
&pinctrl_spi2cs1_default
&pinctrl_spi2miso_default
&pinctrl_spi2mosi_default>;
flash@0 {
status = "okay";
};
};
&uart1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_txd1_default
&pinctrl_rxd1_default>;
};
&lpc_ctrl {
status = "okay";
memory-region = <&flash_memory>;
flash = <&spi1>;
};
&lpc_snoop {
status = "okay";
snoop-ports = <0x80>;
};
&uart5 {
status = "okay";
};
&mac0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rmii1_default>;
clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
<&syscon ASPEED_CLK_MAC1RCLK>;
clock-names = "MACCLK", "RCLK";
use-ncsi;
};
&mac1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
};
&i2c0 {
status = "okay";
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
pagesize = <32>;
};
rtc@68 {
compatible = "nxp,pcf8523";
reg = <0x68>;
};
ucd90160@64 {
compatible = "ti,ucd90160";
reg = <0x64>;
};
/* Power sequencer UCD90160 PMBUS @64h
* FRU AT24C64D @50h
* RTC PCF8523 @68h
* Clock buffer 9DBL04 @6dh
*/
};
&i2c1 {
status = "okay";
i2c-mux@71 {
compatible = "nxp,pca9546";
reg = <0x71>;
#address-cells = <1>;
#size-cells = <0>;
i2cpcie0: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
i2cpcie1: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
i2cpcie2: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
};
i2ctpm: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
};
};
/* MUX1 PCA9546A @71h
* PCIe 0
* PCIe 1
* PCIe 2
* TPM header
*/
};
&i2c2 {
status = "disabled";
/* OCP Mezz Connector A (OOB SMBUS) */
};
&i2c3 {
status = "disabled";
/* OCP Mezz Connector A (PCIe slot SMBUS) */
};
&i2c4 {
status = "okay";
i2c-mux@71 {
compatible = "nxp,pca9546";
reg = <0x71>;
#address-cells = <1>;
#size-cells = <0>;
i2cpcie3: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
i2cpcie4: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
};
/* MUX1 PCA9546A @71h
* PCIe 3
* PCIe 4
*/
};
&i2c5 {
status = "disabled";
/* CPU0 PRM 0.7V */
/* CPU0 PRM 1.2V CH03 */
/* CPU0 PRM 0.8V */
/* CPU0 PRM 1.2V CH47 */
};
&i2c6 {
status = "disabled";
/* CPU1 PRM 0.7V */
/* CPU1 PRM 1.2V CH03 */
/* CPU1 PRM 0.8V */
/* CPU1 PRM 1.2V CH47 */
};
&i2c7 {
status = "okay";
pca9541a@70 {
compatible = "nxp,pca9541";
reg = <0x70>;
i2c-arb {
#address-cells = <1>;
#size-cells = <0>;
hotswap@54 {
compatible = "ti,lm5066i";
reg = <0x54>;
};
};
};
vrm@64 {
compatible = "isil,isl68137";
reg = <0x64>;
};
vrm@40 {
compatible = "isil,isl68137";
reg = <0x40>;
};
vrm@60 {
compatible = "isil,isl68137";
reg = <0x60>;
};
vrm@43 {
compatible = "infineon,ir38064";
reg = <0x43>;
};
vrm@41 {
compatible = "isil,isl68137";
reg = <0x41>;
};
/* Master selector PCA9541A @70h (other master: CPU0)
* LM5066I PMBUS @10h
*/
/*
* Brick will be one of these types/addresses. Depending
* on the board SKU only one is actually present and will successfully
* instantiate while the others will fail the probe operation.
* These are the PVT (and presumably beyond) addresses:
* 12V Quarter Brick DC/DC Converter Q54SJ12050 @6Ah
* 12V Quarter Brick DC/DC Converter Q54SH12050 @30h
*/
power-brick@6a {
compatible = "delta,dps800";
reg = <0x6a>;
};
power-brick@30 {
compatible = "delta,dps800";
reg = <0x30>;
};
/* CPU0 VR ISL68137 0.7V, 0.96V PMBUS @64h */
/* CPU0 VR ISL68137 1.2V CH03 PMBUS @40h */
/* CPU0 VR ISL68137 0.8V PMBUS @60h */
/* CPU0 VR 1.0V IR38064 I2C @11h, PMBUS @43h */
/* CPU0 VR ISL68137 1.2V CH47 PMBUS @41h */
/* Master selector PCA9541A @70h (other master: CPU0)
* LM5066I PMBUS @10h
*/
};
&i2c8 {
status = "okay";
vrm@64 {
compatible = "isil,isl68137";
reg = <0x64>;
};
vrm@40 {
compatible = "isil,isl68137";
reg = <0x40>;
};
vrm@41 {
compatible = "isil,isl68137";
reg = <0x41>;
};
vrm@42 {
compatible = "infineon,ir38064";
reg = <0x42>;
};
vrm@60 {
compatible = "isil,isl68137";
reg = <0x60>;
};
/* CPU1 VR ISL68137 0.7V, 0.96V PMBUS @64h */
/* CPU1 VR ISL68137 1.2V CH03 PMBUS @40h */
/* CPU1 VR ISL68137 1.2V CH47 PMBUS @41h */
/* CPU1 VR 1.0V IR38064 I2C @12h, PMBUS @42h */
/* CPU1 VR ISL68137 0.8V PMBUS @60h */
};
&i2c9 {
status = "disabled";
/* Fan board */
};
&i2c10 {
status = "disabled";
};
&i2c11 {
status = "disabled";
/* GPU sideband */
};
&i2c12 {
status = "disabled";
};
&i2c13 {
status = "disabled";
/* MUX PI3USB102
* CPU0 debug
* CPU1 debug
*/
};
&pinctrl {
pinctrl_gpioh_unbiased: gpioi_unbiased {
pins = "A8", "C7", "B7", "A7", "D7", "B6", "A6", "E7";
bias-disable;
};
};
&gpio {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpioh_unbiased>;
gpio-line-names =
/*A0-A7*/ "","cfam-reset","","","","","","",
/*B0-B7*/ "","","","","","","","",
/*C0-C7*/ "","","","","","","","",
/*D0-D7*/ "fsi-enable","","","","","led-sys-boot-status","led-attention",
"led-fault",
/*E0-E7*/ "","","","","","","","presence-pcie-e2b",
/*F0-F7*/ "","","","","","","","checkstop",
/*G0-G7*/ "fsi-clock","fsi-data","","","","","","",
/*H0-H7*/ "onewire0","onewire1","onewire2","onewire3","","","","",
/*I0-I7*/ "","","","power-button","","","","",
/*J0-J7*/ "","","","","","","","",
/*K0-K7*/ "","","","","","","","",
/*L0-L7*/ "","","","","","","","",
/*M0-M7*/ "","","","","","","","",
/*N0-N7*/ "","","","","","","","",
/*O0-O7*/ "","","","","iso_u164_en","","fsi-trans","",
/*P0-P7*/ "ncsi_mux_en_n","bmc_i2c2_sw_rst_n","","bmc_i2c5_sw_rst_n","",
"","fsi-mux","",
/*Q0-Q7*/ "","","","","","","","",
/*R0-R7*/ "","","","","","","","",
/*S0-S7*/ "","","","","","","","",
/*T0-T7*/ "","","","","","","","",
/*U0-U7*/ "","","","","","","","",
/*V0-V7*/ "","","","","","","","",
/*W0-W7*/ "","","","","","","","",
/*X0-X7*/ "","","","","","","","",
/*Y0-Y7*/ "","","","","","","","",
/*Z0-Z7*/ "","","","","","","","",
/*AA0-AA7*/ "","","led-hdd-fault","","","","","",
/*AB0-AB7*/ "","","","","","","","",
/*AC0-AC7*/ "","","","","","","","";
line-iso-u146-en-hog {
gpio-hog;
gpios = <ASPEED_GPIO(O, 4) GPIO_ACTIVE_HIGH>;
output-high;
};
ncsi-mux-en-n-hog {
gpio-hog;
gpios = <ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
output-low;
};
line-bmc-i2c2-sw-rst-n-hog {
gpio-hog;
gpios = <ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
output-high;
};
line-bmc-i2c5-sw-rst-n-hog {
gpio-hog;
gpios = <ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>;
output-high;
};
};
&vuart {
status = "okay";
};
&gfx {
status = "okay";
};
&pwm_tacho {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
&pinctrl_pwm2_default &pinctrl_pwm3_default>;
fan@0 {
reg = <0x00>;
aspeed,fan-tach-ch = /bits/ 8 <0x00>;
};
fan@1 {
reg = <0x01>;
aspeed,fan-tach-ch = /bits/ 8 <0x01>;
};
fan@2 {
reg = <0x02>;
aspeed,fan-tach-ch = /bits/ 8 <0x02>;
};
fan@3 {
reg = <0x03>;
aspeed,fan-tach-ch = /bits/ 8 <0x03>;
};
};
&ibt {
status = "okay";
};
#include "ibm-power9-dual.dtsi"
