// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2017 Moxa Inc. -
https://www.moxa.com/
*
* Author: Harry YJ Jhou (周亞諄) <harryyj.jhou@moxa.com>
* Jimmy Chen (陳永達) <jimmy.chen@moxa.com>
* SZ Lin (林上智) <sz.lin@moxa.com>
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ls1021a.dtsi"
/ {
model = "Moxa UC-8410A";
compatible = "fsl,ls1021a-moxa-uc-8410a", "fsl,ls1021a";
aliases {
enet0_rgmii_phy = &rgmii_phy0;
enet1_rgmii_phy = &rgmii_phy1;
enet2_rgmii_phy = &rgmii_phy2;
};
sys_mclk: clock-mclk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24576000>;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
leds {
compatible = "gpio-leds";
cel-pwr {
label = "UC8410A:CEL-PWR";
gpios = <&gpio3 27 GPIO_ACTIVE_LOW>;
default-state = "off";
};
cel-reset {
label = "UC8410A:CEL-RESET";
gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
default-state = "off";
};
str-led {
label = "UC8410A:RED:PROG";
gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc0";
};
sw-ready {
label = "UC8410A:GREEN:SWRDY";
gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
beeper {
label = "UC8410A:BEEP";
gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
prog-led0 {
label = "UC8410A:GREEN:PROG2";
gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
prog-led1 {
label = "UC8410A:GREEN:PROG1";
gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
prog-led2 {
label = "UC8410A:GREEN:PROG0";
gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
wifi-signal0 {
label = "UC8410A:GREEN:CEL2";
gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
wifi-signal1 {
label = "UC8410A:GREEN:CEL1";
gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
wifi-signal2 {
label = "UC8410A:GREEN:CEL0";
gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
cpu-diag-red {
label = "UC8410A:RED:DIA";
gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
cpu-diag-green {
label = "UC8410A:GREEN:DIA";
gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
cpu-diag-yellow {
label = "UC8410A:YELLOW:DIA";
gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
gpio-keys {
compatible = "gpio-keys";
pushbtn-key {
label = "push button key";
gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
linux,code = <BTN_MISC>;
default-state = "on";
};
};
};
&enet0 {
phy-handle = <&rgmii_phy0>;
phy-connection-type = "rgmii-id";
status = "okay";
};
&enet1 {
phy-handle = <&rgmii_phy1>;
phy-connection-type = "rgmii-id";
status = "okay";
};
&enet2 {
phy-handle = <&rgmii_phy2>;
phy-connection-type = "rgmii-id";
status = "okay";
};
&i2c0 {
clock-frequency = <100000>;
status = "okay";
tpm@20 {
compatible = "infineon,slb9635tt";
reg = <0x20>;
};
rtc@68 {
compatible = "dallas,ds1374";
reg = <0x68>;
};
};
&lpuart0 {
status = "okay";
};
&mdio0 {
rgmii_phy0: ethernet-phy@0 {
compatible = "marvell,88e1118";
reg = <0x0>;
marvell,reg-init =
<3 0x11 0 0x4415>, /* Reg 3,17 */
<3 0x10 0 0x77>; /* Reg 3,16 */
};
rgmii_phy1: ethernet-phy@1 {
compatible = "marvell,88e1118";
reg = <0x1>;
marvell,reg-init =
<3 0x11 0 0x4415>, /* Reg 3,17 */
<3 0x10 0 0x77>; /* Reg 3,16 */
};
rgmii_phy2: ethernet-phy@2 {
compatible = "marvell,88e1118";
reg = <0x2>;
marvell,reg-init =
<3 0x11 0 0x4415>, /* Reg 3,17 */
<3 0x10 0 0x77>; /* Reg 3,16 */
};
};
&qspi {
status = "okay";
flash: flash@0 {
compatible = "spansion,s25fl064l", "spansion,s25fl164k";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <20000000>;
spi-rx-bus-width = <4>;
spi-tx-bus-width = <4>;
reg = <0>;
partitions@0 {
label = "U-Boot";
reg = <0x0 0x180000>;
};
partitions@180000 {
label = "U-Boot Env";
reg = <0x180000 0x680000>;
};
};
};
&sata {
status = "okay";
};
&uart0 {
status = "okay";
};
&uart1 {
status = "okay";
};
