Spracherkennung für: .dts vermutete Sprache: Unknown {[0] [0] [0]} [Methode: Schwerpunktbildung, einfache Gewichte, sechs Dimensionen]
// SPDX-License-Identifier: BSD-3-Clause
/dts-v1/;
#include "qcom-msm8226.dtsi"
#include "pm8226.dtsi"
/delete-node/ &smem_region;
/ {
model = "Motorola Moto G (2013)";
compatible = "motorola,falcon", "qcom,msm8226";
chassis-type = "handset";
aliases {
mmc0 = &sdhc_1;
};
chosen {
#address-cells = <1>;
#size-cells = <1>;
ranges;
framebuffer@3200000 {
compatible = "simple-framebuffer";
reg = <0x03200000 0x800000>;
width = <720>;
height = <1280>;
stride = <(720 * 3)>;
format = "r8g8b8";
vsp-supply = <®_lcd_pos>;
vsn-supply = <®_lcd_neg>;
vddio-supply = <&vddio_disp_vreg>;
clocks = <&mmcc MDSS_AHB_CLK>,
<&mmcc MDSS_AXI_CLK>,
<&mmcc MDSS_BYTE0_CLK>,
<&mmcc MDSS_ESC0_CLK>,
<&mmcc MDSS_MDP_CLK>,
<&mmcc MMSS_MISC_AHB_CLK>,
<&mmcc MDSS_PCLK0_CLK>,
<&mmcc MDSS_VSYNC_CLK>;
power-domains = <&mmcc MDSS_GDSC>;
};
};
gpio-keys {
compatible = "gpio-keys";
event-hall-sensor {
label = "Hall Effect Sensor";
gpios = <&tlmm 51 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
linux,code = <SW_LID>;
linux,can-disable;
};
key-volume-up {
label = "Volume Up";
gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
debounce-interval = <15>;
};
};
/* TI TPS22902 */
vddio_disp_vreg: regulator-vddio-disp {
compatible = "regulator-fixed";
regulator-name = "vddio_disp";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&tlmm 34 GPIO_ACTIVE_HIGH>;
vin-supply = <&pm8226_l8>;
startup-delay-us = <300>;
enable-active-high;
regulator-boot-on;
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
framebuffer@3200000 {
reg = <0x03200000 0x800000>;
no-map;
};
dhob@f500000 {
reg = <0x0f500000 0x40000>;
no-map;
};
shob@f540000 {
reg = <0x0f540000 0x2000>;
no-map;
};
smem_region: smem@fa00000 {
reg = <0x0fa00000 0x100000>;
no-map;
};
/* Actually <0x0fa00000 0x500000>, but first 100000 is smem */
reserved@fb00000 {
reg = <0x0fb00000 0x400000>;
no-map;
};
};
};
&blsp1_i2c2 {
clock-frequency = <100000>;
status = "okay";
magnetometer@c {
compatible = "asahi-kasei,ak8963";
reg = <0xc>;
interrupts-extended = <&tlmm 66 IRQ_TYPE_EDGE_FALLING>;
reset-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
vdd-supply = <&pm8226_l19>;
vid-supply = <&pm8226_lvs1>;
pinctrl-0 = <&mag_int_default &mag_reset_default>;
pinctrl-names = "default";
};
accelerometer@19 {
compatible = "st,lis3dh-accel";
reg = <0x19>;
interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_FALLING>;
vdd-supply = <&pm8226_l19>;
vddio-supply = <&pm8226_lvs1>;
pinctrl-0 = <&accel_int_default>;
pinctrl-names = "default";
mount-matrix = "0", "1", "0",
"1", "0", "0",
"0", "0", "-1";
st,drdy-int-pin = <1>;
};
};
&blsp1_i2c3 {
clock-frequency = <400000>;
status = "okay";
regulator@3e {
compatible = "ti,tps65132";
reg = <0x3e>;
pinctrl-0 = <®_lcd_default>;
pinctrl-names = "default";
reg_lcd_pos: outp {
regulator-name = "outp";
regulator-min-microvolt = <5400000>;
regulator-max-microvolt = <5400000>;
regulator-active-discharge = <1>;
regulator-boot-on;
enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
};
reg_lcd_neg: outn {
regulator-name = "outn";
regulator-min-microvolt = <5400000>;
regulator-max-microvolt = <5400000>;
regulator-active-discharge = <1>;
regulator-boot-on;
enable-gpios = <&tlmm 33 GPIO_ACTIVE_HIGH>;
};
};
temperature-sensor@48 {
compatible = "ti,tmp108";
reg = <0x48>;
interrupts-extended = <&tlmm 13 IRQ_TYPE_LEVEL_LOW>;
pinctrl-0 = <&temp_alert_default>;
pinctrl-names = "default";
#thermal-sensor-cells = <0>;
};
};
&pm8226_resin {
linux,code = <KEY_VOLUMEDOWN>;
status = "okay";
};
&pm8226_vib {
status = "okay";
};
&rpm_requests {
regulators {
compatible = "qcom,rpm-pm8226-regulators";
pm8226_s3: s3 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1300000>;
};
pm8226_s4: s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2200000>;
};
pm8226_s5: s5 {
regulator-min-microvolt = <1150000>;
regulator-max-microvolt = <1150000>;
};
pm8226_l1: l1 {
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
};
pm8226_l2: l2 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
pm8226_l3: l3 {
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1337500>;
};
pm8226_l4: l4 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
pm8226_l5: l5 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
pm8226_l6: l6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-allow-set-load;
};
pm8226_l7: l7 {
regulator-min-microvolt = <1850000>;
regulator-max-microvolt = <1850000>;
};
pm8226_l8: l8 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pm8226_l9: l9 {
regulator-min-microvolt = <2050000>;
regulator-max-microvolt = <2050000>;
};
pm8226_l10: l10 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pm8226_l12: l12 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
pm8226_l14: l14 {
regulator-min-microvolt = <2750000>;
regulator-max-microvolt = <2750000>;
};
pm8226_l15: l15 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
pm8226_l16: l16 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3350000>;
};
pm8226_l17: l17 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
};
pm8226_l18: l18 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
};
pm8226_l19: l19 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
};
pm8226_l20: l20 {
regulator-min-microvolt = <3075000>;
regulator-max-microvolt = <3075000>;
};
pm8226_l21: l21 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
regulator-allow-set-load;
};
pm8226_l22: l22 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
};
pm8226_l23: l23 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
};
pm8226_l24: l24 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1350000>;
};
pm8226_l25: l25 {
regulator-min-microvolt = <1775000>;
regulator-max-microvolt = <2125000>;
};
pm8226_l26: l26 {
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
};
pm8226_l27: l27 {
regulator-min-microvolt = <2050000>;
regulator-max-microvolt = <2050000>;
};
pm8226_l28: l28 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3400000>;
regulator-boot-on;
};
pm8226_lvs1: lvs1 {
regulator-always-on;
};
};
};
&sdhc_1 {
vmmc-supply = <&pm8226_l17>;
vqmmc-supply = <&pm8226_l6>;
bus-width = <8>;
non-removable;
status = "okay";
};
&smbb {
qcom,fast-charge-safe-current = <2000000>;
qcom,fast-charge-current-limit = <1900000>;
qcom,fast-charge-safe-voltage = <4400000>;
qcom,minimum-input-voltage = <4300000>;
status = "okay";
};
&tlmm {
accel_int_default: accel-int-default-state {
pins = "gpio63";
function = "gpio";
drive-strength = <2>;
bias-disable;
output-disable;
};
mag_int_default: mag-int-default-state {
pins = "gpio66";
function = "gpio";
drive-strength = <2>;
bias-disable;
output-disable;
};
mag_reset_default: mag-reset-default-state {
pins = "gpio62";
function = "gpio";
drive-strength = <2>;
bias-disable;
output-high;
};
reg_lcd_default: reg-lcd-default-state {
pins = "gpio31", "gpio33";
function = "gpio";
drive-strength = <2>;
bias-disable;
output-high;
};
reg_vddio_disp_default: reg-vddio-disp-default-state {
pins = "gpio34";
function = "gpio";
drive-strength = <2>;
bias-disable;
output-high;
};
temp_alert_default: temp-alert-default-state {
pins = "gpio13";
function = "gpio";
drive-strength = <2>;
bias-disable;
output-disable;
};
};
&usb {
extcon = <&smbb>;
dr_mode = "peripheral";
status = "okay";
};
&usb_hs_phy {
extcon = <&smbb>;
v1p8-supply = <&pm8226_l10>;
v3p3-supply = <&pm8226_l20>;
};
[ Dauer der Verarbeitung: 0.30 Sekunden
]
