Anforderungen  |   Konzepte  |   Entwurf  |   Entwicklung  |   Qualitätssicherung  |   Lebenszyklus  |   Steuerung
 
 
 
 


Quelle  am5729-beagleboneai.dts   Sprache: unbekannt

 
// SPDX-License-Identifier: GPL-2.0
/*
 * Copyright (C) 2014-2019 Texas Instruments Incorporated - https://www.ti.com/
 */

/dts-v1/;

#include "dra74x.dtsi"
#include "am57xx-commercial-grade.dtsi"
#include "dra74x-mmc-iodelay.dtsi"
#include "dra74-ipu-dsp-common.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/dra.h>

/ {
 model = "BeagleBoard.org BeagleBone AI";
 compatible = "beagle,am5729-beagleboneai", "ti,am5728",
       "ti,dra742", "ti,dra74", "ti,dra7";

 aliases {
  rtc0 = &tps659038_rtc;
  rtc1 = &rtc;
  display0 = &hdmi_conn;
 };

 chosen {
  stdout-path = &uart1;
 };

 memory@0 {
  device_type = "memory";
  reg = <0x0 0x80000000 0x0 0x40000000>;
 };

 reserved-memory {
  #address-cells = <2>;
  #size-cells = <2>;
  ranges;

  ipu2_memory_region: ipu2-memory@95800000 {
   compatible = "shared-dma-pool";
   reg = <0x0 0x95800000 0x0 0x3800000>;
   reusable;
   status = "okay";
  };

  dsp1_memory_region: dsp1-memory@99000000 {
   compatible = "shared-dma-pool";
   reg = <0x0 0x99000000 0x0 0x4000000>;
   reusable;
   status = "okay";
  };

  ipu1_memory_region: ipu1-memory@9d000000 {
   compatible = "shared-dma-pool";
   reg = <0x0 0x9d000000 0x0 0x2000000>;
   reusable;
   status = "okay";
  };

  dsp2_memory_region: dsp2-memory@9f000000 {
   compatible = "shared-dma-pool";
   reg = <0x0 0x9f000000 0x0 0x800000>;
   reusable;
   status = "okay";
  };

 };

 vdd_adc: gpioregulator-vdd_adc {
  compatible = "regulator-gpio";
  regulator-name = "vdd_adc";
  vin-supply = <&vdd_5v>;
  regulator-min-microvolt = <1800000>;
  regulator-max-microvolt = <3300000>;
  regulator-always-on;
  regulator-boot-on;
  gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
  states = <1800000 0
   3300000 1>;
 };

 vdd_5v: fixedregulator-vdd_5v {
  compatible = "regulator-fixed";
  regulator-name = "vdd_5v";
  regulator-min-microvolt = <5000000>;
  regulator-max-microvolt = <5000000>;
  regulator-always-on;
  regulator-boot-on;
 };

 vtt_fixed: fixedregulator-vtt {
  /* TPS51200 */
  compatible = "regulator-fixed";
  regulator-name = "vtt_fixed";
  vin-supply = <&vdd_ddr>;
  regulator-min-microvolt = <3300000>;
  regulator-max-microvolt = <3300000>;
  regulator-always-on;
  regulator-boot-on;
 };

 leds {
  compatible = "gpio-leds";

  led0 {
   label = "beaglebone:green:usr0";
   gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
   linux,default-trigger = "heartbeat";
   default-state = "off";
  };

  led1 {
   label = "beaglebone:green:usr1";
   gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
   linux,default-trigger = "mmc0";
   default-state = "off";
  };

  led2 {
   label = "beaglebone:green:usr2";
   gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
   linux,default-trigger = "cpu";
   default-state = "off";
  };

  led3 {
   label = "beaglebone:green:usr3";
   gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
   linux,default-trigger = "mmc1";
   default-state = "off";
  };

  led4 {
   label = "beaglebone:green:usr4";
   gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
   linux,default-trigger = "netdev";
   default-state = "off";
  };
 };

 hdmi_conn: connector@0 {
  compatible = "hdmi-connector";
  label = "hdmi";
  type = "a";

  port {
   hdmi_connector_in: endpoint {
    remote-endpoint = <&hdmi_encoder_out>;
   };
  };
 };

 hdmi_enc: encoder@0 {
  /* "ti,tpd12s016" software compatible with "ti,tpd12s015"
   *  no need for individual driver
   */
  compatible = "ti,tpd12s015";
  gpios = <0>,
   <0>,
   <&gpio7 12 GPIO_ACTIVE_HIGH>;

  ports {
   #address-cells = <0x1>;
   #size-cells = <0x0>;

   port@0 {
    reg = <0x0>;

    hdmi_encoder_in: endpoint@0 {
     remote-endpoint = <&hdmi_out>;
    };
   };

   port@1 {
    reg = <0x1>;

    hdmi_encoder_out: endpoint@0 {
     remote-endpoint = <&hdmi_connector_in>;
    };
   };
  };
 };

 emmc_pwrseq: emmc_pwrseq {
  compatible = "mmc-pwrseq-emmc";
  reset-gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
 };

 brcmf_pwrseq: brcmf_pwrseq {
  compatible = "mmc-pwrseq-simple";
  reset-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>, /* BT-REG-ON */
    <&gpio3 18 GPIO_ACTIVE_LOW>; /* WL-REG-ON */
 };

 extcon_usb1: extcon_usb1 {
  compatible = "linux,extcon-usb-gpio";
  id-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
 };
};

&i2c1 {
 status = "okay";
 clock-frequency = <400000>;

 tps659038: tps659038@58 {
  compatible = "ti,tps659038";
  reg = <0x58>;
  interrupt-parent = <&gpio6>;
  interrupts = <16 IRQ_TYPE_LEVEL_LOW>;

  #interrupt-cells = <2>;
  interrupt-controller;

  ti,system-power-controller;
  ti,palmas-override-powerhold;

  tps659038_pmic {
   compatible = "ti,tps659038-pmic";

   smps12-in-supply = <&vdd_5v>;
   smps3-in-supply = <&vdd_5v>;
   smps45-in-supply = <&vdd_5v>;
   smps6-in-supply = <&vdd_5v>;
   smps7-in-supply = <&vdd_5v>;
   mps3-in-supply = <&vdd_5v>;
   smps8-in-supply = <&vdd_5v>;
   smps9-in-supply = <&vdd_5v>;
   ldo1-in-supply = <&vdd_5v>;
   ldo2-in-supply = <&vdd_5v>;
   ldo3-in-supply = <&vdd_5v>;
   ldo4-in-supply = <&vdd_5v>;
   ldo9-in-supply = <&vdd_5v>;
   ldoln-in-supply = <&vdd_5v>;
   ldousb-in-supply = <&vdd_5v>;
   ldortc-in-supply = <&vdd_5v>;

   regulators {
    vdd_mpu: smps12 {
     /* VDD_MPU */
     regulator-name = "smps12";
     regulator-min-microvolt = <850000>;
     regulator-max-microvolt = <1250000>;
     regulator-always-on;
     regulator-boot-on;
    };

    vdd_ddr: smps3 {
     /* VDD_DDR EMIF1 EMIF2 */
     regulator-name = "smps3";
     regulator-min-microvolt = <1350000>;
     regulator-max-microvolt = <1350000>;
     regulator-always-on;
     regulator-boot-on;
    };

    vdd_dspeve: smps45 {
     /* VDD_DSPEVE on AM572 */
     regulator-name = "smps45";
     regulator-min-microvolt = < 850000>;
     regulator-max-microvolt = <1250000>;
     regulator-always-on;
     regulator-boot-on;
    };

    vdd_gpu: smps6 {
     /* VDD_GPU */
     regulator-name = "smps6";
     regulator-min-microvolt = < 850000>;
     regulator-max-microvolt = <1250000>;
     regulator-always-on;
     regulator-boot-on;
    };

    vdd_core: smps7 {
     /* VDD_CORE */
     regulator-name = "smps7";
     regulator-min-microvolt = < 850000>; /*** 1.15V */
     regulator-max-microvolt = <1150000>;
     regulator-always-on;
     regulator-boot-on;
    };

    vdd_iva: smps8 {
     /* VDD_IVAHD */    /*** 1.06V */
     regulator-name = "smps8";
    };

    vdd_3v3: smps9 {
     /* VDD_3V3 */
     regulator-name = "smps9";
     regulator-min-microvolt = <3300000>;
     regulator-max-microvolt = <3300000>;
     regulator-always-on;
     regulator-boot-on;
    };

    vdd_sd: ldo1 {
     /* VDDSHV8 - VSDMMC  */
     regulator-name = "ldo1";
     regulator-min-microvolt = <1800000>;
     regulator-max-microvolt = <3300000>;
     regulator-boot-on;
     regulator-always-on;
    };

    vdd_1v8: ldo2 {
     /* VDDSH18V */
     regulator-name = "ldo2";
     regulator-min-microvolt = <1800000>;
     regulator-max-microvolt = <1800000>;
     regulator-always-on;
     regulator-boot-on;
    };

    vdd_1v8_phy_ldo3: ldo3 {
     /* R1.3a 572x V1_8PHY_LDO3: USB, SATA */
     regulator-name = "ldo3";
     regulator-min-microvolt = <1800000>;
     regulator-max-microvolt = <1800000>;
     regulator-always-on;
     regulator-boot-on;
    };

    vdd_1v8_phy_ldo4: ldo4 {
     /* R1.3a 572x V1_8PHY_LDO4: PCIE, HDMI*/
     regulator-name = "ldo4";
     regulator-min-microvolt = <1800000>;
     regulator-max-microvolt = <1800000>;
     regulator-always-on;
     regulator-boot-on;
    };

    /* LDO5-8 unused */

    vdd_rtc: ldo9 {
     /* VDD_RTC  */
     regulator-name = "ldo9";
     regulator-min-microvolt = < 840000>;
     regulator-max-microvolt = <1160000>;
     regulator-always-on;
     regulator-boot-on;
    };

    vdd_1v8_pll: ldoln {
     /* VDDA_1V8_PLL */
     regulator-name = "ldoln";
     regulator-min-microvolt = <1800000>;
     regulator-max-microvolt = <1800000>;
     regulator-always-on;
     regulator-boot-on;
    };

    ldousb_reg: ldousb {
     /* VDDA_3V_USB: VDDA_USBHS33 */
     regulator-name = "ldousb";
     regulator-min-microvolt = <3300000>;
     regulator-max-microvolt = <3300000>;
     regulator-always-on;
     regulator-boot-on;
    };

    ldortc_reg: ldortc {
     /* VDDA_RTC  */
     regulator-name = "ldortc";
     regulator-min-microvolt = <1800000>;
     regulator-max-microvolt = <1800000>;
     regulator-always-on;
     regulator-boot-on;
    };

    regen1: regen1 {
     /* VDD_3V3_ON */
     regulator-name = "regen1";
     regulator-boot-on;
     regulator-always-on;
    };

    regen2: regen2 {
     /* Needed for PMIC internal resource */
     regulator-name = "regen2";
     regulator-boot-on;
     regulator-always-on;
    };
   };
  };

  tps659038_rtc: tps659038_rtc {
   compatible = "ti,palmas-rtc";
   interrupt-parent = <&tps659038>;
   interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
   wakeup-source;
  };

  tps659038_pwr_button: tps659038_pwr_button {
   compatible = "ti,palmas-pwrbutton";
   interrupt-parent = <&tps659038>;
   interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
   wakeup-source;
   ti,palmas-long-press-seconds = <12>;
  };

  tps659038_gpio: tps659038_gpio {
   compatible = "ti,palmas-gpio";
   gpio-controller;
   #gpio-cells = <2>;
  };
 };

 /* STMPE811 touch screen controller */
 stmpe811@41 {
  compatible = "st,stmpe811";
  reg = <0x41>;
  interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
  interrupt-parent = <&gpio2>;
  id = <0>;
  blocks = <0x5>;
  irq-trigger = <0x1>;
  st,mod-12b = <1>; /* 12-bit ADC */
  st,ref-sel = <0>; /* internal ADC reference */
  st,adc-freq = <1>; /* 3.25 MHz ADC clock speed */
  st,sample-time = <4>; /* ADC converstion time: 80 clocks */

  stmpe_adc {
   compatible = "st,stmpe-adc";
   st,norequest-mask = <0x00>; /* mask any channels to be used by touchscreen */
   adc0: iio-device@0 {
    #io-channel-cells = <1>;
    iio-channels = <&adc0 4>, <&adc0 1>, <&adc0 2>, <&adc0 3>, <&adc0 4>, <&adc0 5>, <&adc0 6>;
    iio-channel-names = "AIN0_P9_39", "AIN1_P9_40", "AIN2_P9_37", "AIN3_P9_38",
     "AIN4_P9_33", "AIN5_P9_36", "AIN6_P9_35";
   };
  };

  stmpe_touchscreen {
   status = "disabled";
   compatible = "st,stmpe-ts";
   /* 8 sample average control */
   st,ave-ctrl = <3>;
   /* 7 length fractional part in z */
   st,fraction-z = <7>;
   /*
    * 50 mA typical 80 mA max touchscreen drivers
    * current limit value
    */
   st,i-drive = <1>;
   /* 1 ms panel driver settling time */
   st,settling = <3>;
   /* 5 ms touch detect interrupt delay */
   st,touch-det-delay = <5>;
  };

  stmpe_gpio {
   compatible = "st,stmpe-gpio";
  };

  stmpe_pwm {
   compatible = "st,stmpe-pwm";
   #pwm-cells = <2>;
  };
 };
};

&mcspi3 {
 status = "okay";
 ti,pindir-d0-out-d1-in;

 sn65hvs882: sn65hvs882@0 {
  compatible = "pisosr-gpio";
  gpio-controller;
  #gpio-cells = <2>;

  reg = <0>;
  spi-max-frequency = <1000000>;
  spi-cpol;
 };
};

&cpu0 {
 vdd-supply = <&vdd_mpu>;
 voltage-tolerance = <1>;
};

&uart1 {
 status = "okay";
};

&davinci_mdio_sw {
 reset-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
 reset-delay-us = <2>;

 phy0: ethernet-phy@4 {
  reg = <4>;
  eee-broken-100tx;
  eee-broken-1000t;
 };
};

&mac_sw {
 status = "okay";
};

&cpsw_port1 {
 phy-handle = <&phy0>;
 phy-mode = "rgmii-rxid";
 ti,dual-emac-pvid = <1>;
};

&cpsw_port2 {
 status = "disabled";
};

&ocp {
 pruss1_shmem: pruss_shmem@4b200000 {
  status = "okay";
  compatible = "ti,pruss-shmem";
  reg = <0x4b200000 0x020000>;
 };

 pruss2_shmem: pruss_shmem@4b280000 {
  status = "okay";
  compatible = "ti,pruss-shmem";
  reg = <0x4b280000 0x020000>;
 };
};

&mmc1 {
 status = "okay";
 vmmc-supply = <&vdd_3v3>;
 vqmmc-supply = <&vdd_sd>;
 bus-width = <4>;
 cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */

 pinctrl-names = "default";
 pinctrl-0 = <&mmc1_pins_default>;
};

&mmc2 {
 status = "okay";
 vmmc-supply = <&vdd_1v8>;
 vqmmc-supply = <&vdd_1v8>;
 bus-width = <8>;
 ti,non-removable;
 non-removable;
 mmc-pwrseq = <&emmc_pwrseq>;

 ti,needs-special-reset;
 dmas = <&sdma_xbar 47>, <&sdma_xbar 48>;
 dma-names = "tx", "rx";

};

&mmc4 {
 /* DS: Default speed (DS) up to 25 MHz, including 1- and 4-bit modes (3.3 V signaling). */
 /* HS: High speed up to 50 MHz (3.3 V signaling). */
 /* SDR12: SDR up to 25 MHz (1.8 V signaling). */
 /* SDR25: SDR up to 50 MHz (1.8 V signaling). */
 /* SDR50: SDR up to 100 MHz (1.8 V signaling). */
 /* SDR104: SDR up to 208 MHz (1.8 V signaling) */
 /* DDR50: DDR up to 50 MHz (1.8 V signaling). */
 status = "okay";

 ti,needs-special-reset;
 vmmc-supply = <&vdd_3v3>;
 cap-power-off-card;
 keep-power-in-suspend;
 bus-width = <4>;
 ti,non-removable;
 non-removable;
 no-1-8-v;
 max-frequency = <24000000>;

 #address-cells = <1>;
 #size-cells = <0>;
 mmc-pwrseq = <&brcmf_pwrseq>;

 brcmf: wifi@1 {
  status = "okay";
  reg = <1>;
  compatible = "brcm,bcm4329-fmac";

  brcm,sd-head-align = <4>;
  brcm,sd_head_align = <4>;
  brcm,sd_sgentry_align = <512>;

  interrupt-parent = <&gpio3>;
  interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
  interrupt-names = "host-wake";
 };
};

&usb2_phy1 {
 phy-supply = <&ldousb_reg>;
};

&usb2_phy2 {
 phy-supply = <&ldousb_reg>;
};

&usb1 {
 status = "okay";
 dr_mode = "otg";
};

&omap_dwc3_1 {
 extcon = <&extcon_usb1>;
};

&usb2 {
 status = "okay";
 dr_mode = "host";
};

&dss {
 status = "okay";
 vdda_video-supply = <&vdd_1v8_pll>;
};

&hdmi {
 status = "okay";
 vdda-supply = <&vdd_1v8_phy_ldo4>;

 port {
  hdmi_out: endpoint {
   remote-endpoint = <&hdmi_encoder_in>;
  };
 };
};

&bandgap {
 status = "okay";
};

&cpu_alert0 {
 temperature = <55000>; /* milliCelsius */
};

&cpu_crit {
 temperature = <85000>; /* milliCelsius */
};

&gpu_crit {
 temperature = <85000>; /* milliCelsius */
};

&core_crit {
 temperature = <85000>; /* milliCelsius */
};

&dspeve_crit {
 temperature = <85000>; /* milliCelsius */
};

&iva_crit {
 temperature = <85000>; /* milliCelsius */
};

&sata {
 status = "disabled";
};

&sata_phy {
 status = "disabled";
};

/* bluetooth */
&uart6 {
 status = "okay";
};

/* cape header stuff */
&i2c4 {
 status = "okay";
 clock-frequency = <100000>;
};

&ipu2 {
 status = "okay";
 memory-region = <&ipu2_memory_region>;
};

&ipu1 {
 status = "okay";
 memory-region = <&ipu1_memory_region>;
};

&dsp1 {
 status = "okay";
 memory-region = <&dsp1_memory_region>;
};

&dsp2 {
 status = "okay";
 memory-region = <&dsp2_memory_region>;
};

[ Dauer der Verarbeitung: 0.36 Sekunden  (vorverarbeitet)  ]

                                                                                                                                                                                                                                                                                                                                                                                                     


Neuigkeiten

     Aktuelles
     Motto des Tages

Software

     Produkte
     Quellcodebibliothek

Aktivitäten

     Artikel über Sicherheit
     Anleitung zur Aktivierung von SSL

Muße

     Gedichte
     Musik
     Bilder

Jenseits des Üblichen ....
    

Besucherstatistik

Besucherstatistik

Monitoring

Montastic status badge