Quelle  imx8mm-ucm-som.dtsi   Sprache: unbekannt

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
//
// Copyright 2018 CompuLab

/dts-v1/;

#include "imx8mm.dtsi"
#include <dt-bindings/leds/common.h>

/ {
 aliases {
  rtc0 = &rtc_i2c;
  rtc1 = &snvs_rtc;
  mmc0 = &usdhc3;
 };

 chosen {
  stdout-path = &uart3;
 };

 backlight {
  compatible = "pwm-backlight";
  pwms = <&pwm2 0 3000000 0>;
  brightness-levels = <0 255>;
  num-interpolated-steps = <255>;
  default-brightness-level = <222>;
  status = "okay";
 };

 leds {
  compatible = "gpio-leds";
  pinctrl-names = "default";
  pinctrl-0 = <&pinctrl_gpio_led>;

  heartbeat-led {
   function = LED_FUNCTION_STATUS;
   gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
   linux,default-trigger = "heartbeat";
  };
 };

 pmic_osc: clock-pmic {
  compatible = "fixed-clock";
  #clock-cells = <0>;
  clock-frequency = <32768>;
  clock-output-names = "pmic_osc";
 };

 wlreg_on: regulator-wlreg-on {
  compatible = "regulator-fixed";
  regulator-min-microvolt = <3300000>;
  regulator-max-microvolt = <3300000>;
  regulator-name = "wlreg_on";
  gpio = <&gpio2 10 GPIO_ACTIVE_HIGH>;
  startup-delay-us = <100>;
  enable-active-high;
  regulator-always-on;
  status = "okay";
 };

 reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
  compatible = "regulator-fixed";
  regulator-name = "VSD_3V3";
  regulator-min-microvolt = <3300000>;
  regulator-max-microvolt = <3300000>;
  gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
  enable-active-high;
  startup-delay-us = <100>;
  off-on-delay-us = <12000>;
 };

 regulator-usdhc3rst {
  compatible = "regulator-fixed";
  regulator-name = "usdhc3_rst";
  regulator-min-microvolt = <3300000>;
  regulator-max-microvolt = <3300000>;
  gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
  regulator-always-on;
  enable-active-high;
 };

 regulator-fec1rst {
  compatible = "regulator-fixed";
  regulator-name = "fec1_rst";
  regulator-min-microvolt = <3300000>;
  regulator-max-microvolt = <3300000>;
  gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
  regulator-always-on;
  enable-active-high;
  startup-delay-us = <500>;
  regulator-boot-on;
 };
};

&A53_0 {
 arm-supply = <&buck2>;
};

&cpu_alert0 {
 temperature = <105000>;
};

&cpu_crit0 {
 temperature = <115000>;
};

&fec1 {
 pinctrl-names = "default";
 pinctrl-0 = <&pinctrl_fec1>;
 phy-mode = "rgmii-id";
 phy-handle = <ðphy0>;
 fsl,magic-packet;
 status = "okay";

 mdio {
  #address-cells = <1>;
  #size-cells = <0>;

  ethphy0: ethernet-phy@0 {
   compatible = "ethernet-phy-ieee802.3-c22";
   reg = <0>;
  };
 };
};

&i2c2 {
 clock-frequency = <400000>;
 pinctrl-names = "default";
 pinctrl-0 = <&pinctrl_i2c2>;
 status = "okay";

 pmic@4b {
  reg = <0x4b>;
  compatible = "rohm,bd71837";
  pinctrl-names = "default";
  pinctrl-0 = <&pinctrl_pmic>;
  #clock-cells = <0>;
  clocks = <&pmic_osc>;
  clock-names = "osc";
  clock-output-names = "pmic_clk";
  interrupt-parent = <&gpio1>;
  interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
  rohm,reset-snvs-powered;

  regulators {
   buck1: BUCK1 {
    regulator-name = "buck1";
    regulator-min-microvolt = <700000>;
    regulator-max-microvolt = <1300000>;
    regulator-boot-on;
    regulator-always-on;
    regulator-ramp-delay = <1250>;
   };

   buck2: BUCK2 {
    regulator-name = "buck2";
    regulator-min-microvolt = <700000>;
    regulator-max-microvolt = <1300000>;
    regulator-boot-on;
    regulator-always-on;
    regulator-ramp-delay = <1250>;
    rohm,dvs-run-voltage = <1000000>;
    rohm,dvs-idle-voltage = <900000>;
   };

   buck3: BUCK3 {
    regulator-name = "buck3";
    regulator-min-microvolt = <700000>;
    regulator-max-microvolt = <1300000>;
    regulator-boot-on;
    regulator-always-on;
   };

   buck4: BUCK4 {
    regulator-name = "buck4";
    regulator-min-microvolt = <700000>;
    regulator-max-microvolt = <1300000>;
    regulator-boot-on;
    regulator-always-on;
   };

   buck5: BUCK5 {
    regulator-name = "buck5";
    regulator-min-microvolt = <700000>;
    regulator-max-microvolt = <1350000>;
    regulator-boot-on;
    regulator-always-on;
   };

   buck6: BUCK6 {
    regulator-name = "buck6";
    regulator-min-microvolt = <3000000>;
    regulator-max-microvolt = <3300000>;
    regulator-boot-on;
    regulator-always-on;
   };

   buck7: BUCK7 {
    regulator-name = "buck7";
    regulator-min-microvolt = <1605000>;
    regulator-max-microvolt = <1995000>;
    regulator-boot-on;
    regulator-always-on;
   };

   buck8: BUCK8 {
    regulator-name = "buck8";
    regulator-min-microvolt = <800000>;
    regulator-max-microvolt = <1400000>;
    regulator-boot-on;
    regulator-always-on;
   };

   ldo1: LDO1 {
    regulator-name = "ldo1";
    regulator-min-microvolt = <1600000>;
    regulator-max-microvolt = <1900000>;
    regulator-boot-on;
    regulator-always-on;
   };

   ldo2: LDO2 {
    regulator-name = "ldo2";
    regulator-min-microvolt = <800000>;
    regulator-max-microvolt = <900000>;
    regulator-boot-on;
    regulator-always-on;
   };

   ldo3: LDO3 {
    regulator-name = "ldo3";
    regulator-min-microvolt = <1800000>;
    regulator-max-microvolt = <3300000>;
    regulator-boot-on;
    regulator-always-on;
   };

   ldo4: LDO4 {
    regulator-name = "ldo4";
    regulator-min-microvolt = <900000>;
    regulator-max-microvolt = <1800000>;
    regulator-boot-on;
    regulator-always-on;
   };

   ldo5: LDO5 {
    regulator-name = "ldo5";
    regulator-min-microvolt = <1800000>;
    regulator-max-microvolt = <3300000>;
   };

   ldo6: LDO6 {
    regulator-name = "ldo6";
    regulator-min-microvolt = <900000>;
    regulator-max-microvolt = <1800000>;
    regulator-boot-on;
    regulator-always-on;
   };

   ldo7: LDO7 {
    regulator-name = "ldo7";
    regulator-min-microvolt = <1800000>;
    regulator-max-microvolt = <3300000>;
   };
  };
 };

 eeprom@50 {
  compatible = "atmel,24c08";
  reg = <0x50>;
  pagesize = <16>;
 };

 rtc_i2c: rtc@69 {
  compatible = "abracon,ab1805";
  reg = <0x69>;
 };
};

&i2c3 {
 clock-frequency = <100000>;
 pinctrl-names = "default";
 pinctrl-0 = <&pinctrl_i2c3>;
 status = "disabled";
};

&pwm2 {
 pinctrl-names = "default";
 pinctrl-0 = <&pinctrl_pwm_backlight>;
 status = "okay";
};

&sai2 {
 #sound-dai-cells = <0>;
 pinctrl-names = "default";
 pinctrl-0 = <&pinctrl_sai2>;
 assigned-clocks = <&clk IMX8MM_CLK_SAI2>;
 assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
 assigned-clock-rates = <49152000>;
 clocks = <&clk IMX8MM_CLK_SAI2_IPG>, <&clk IMX8MM_CLK_DUMMY>,
  <&clk IMX8MM_CLK_SAI2_ROOT>, <&clk IMX8MM_CLK_DUMMY>,
  <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_AUDIO_PLL1_OUT>,
  <&clk IMX8MM_AUDIO_PLL2_OUT>;
 clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k";
 fsl,sai-asynchronous;
 status = "okay";
};

&snvs {
 status = "okay";
};

&snvs_pwrkey {
 status = "okay";
};

&uart1 {
 pinctrl-names = "default";
 pinctrl-0 = <&pinctrl_uart1>;
 assigned-clocks = <&clk IMX8MM_CLK_UART1>;
 assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
 status = "disabled";
};

&uart2 {
 pinctrl-names = "default";
 pinctrl-0 = <&pinctrl_uart2>;
 assigned-clocks = <&clk IMX8MM_CLK_UART2>;
 assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
 status = "disabled";
};

&uart3 { /* console */
 pinctrl-names = "default";
 pinctrl-0 = <&pinctrl_uart3>;
 status = "okay";
};

&uart4 { /* bluetooth */
 pinctrl-names = "default";
 pinctrl-0 = <&pinctrl_uart4>;
 assigned-clocks = <&clk IMX8MM_CLK_UART4>;
 assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
 uart-has-rtscts;
 status = "disabled";

 bluetooth {
  compatible = "brcm,bcm4330-bt";
  pinctrl-names = "default";
  pinctrl-0 = <&pinctrl_bt>;
  max-speed = <3000000>;
  device-wakeup-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
  host-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
  shutdown-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
 };
};

&usbotg1 {
 dr_mode = "otg";
 hnp-disable;
 srp-disable;
 disable-over-current;
 status = "disabled";
};

&usbotg2 {
 dr_mode = "host";
 hnp-disable;
 srp-disable;
 disable-over-current;
 status = "disabled";
};

&usdhc1 {
 pinctrl-names = "default", "state_100mhz", "state_200mhz";
 pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
 pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>;
 pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
 bus-width = <4>;
 non-removable;
};

&usdhc2 {
 pinctrl-names = "default", "state_100mhz", "state_200mhz";
 pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
 pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
 pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
 cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
 wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
 no-1-8-v;
 bus-width = <4>;
 vmmc-supply = <®_usdhc2_vmmc>;
 status = "okay";
};

&usdhc3 {
 pinctrl-names = "default", "state_100mhz", "state_200mhz";
 pinctrl-0 = <&pinctrl_usdhc3>;
 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 bus-width = <8>;
 non-removable;
 no-1-8-v;
 status = "okay";
};

&wdog1 {
 pinctrl-names = "default";
 pinctrl-0 = <&pinctrl_wdog>;
 fsl,ext-reset-output;
 status = "okay";
};

&iomuxc {
 pinctrl-names = "default";
 pinctrl-0 = <&pinctrl_hog_1>;

 pinctrl_hog: hoggrp {
  fsl,pins = <
   MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10  0x19
   MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16  0x190
  >;
 };

 pinctrl_bt: bt0grp {
  fsl,pins = <
   MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6  0x19 /* BT_REG_ON */
   MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7  0x19 /* BT_DEV_WU */
   MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8  0x19 /* BT_HST_WU */
  >;
 };

 pinctrl_fec1: fec1grp {
  fsl,pins = <
   MX8MM_IOMUXC_ENET_MDC_ENET1_MDC   0x3
   MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO  0x3
   MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3  0x1f
   MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2  0x1f
   MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1  0x1f
   MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0  0x1f
   MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3  0x91
   MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2  0x91
   MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1  0x91
   MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0  0x91
   MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC  0x1f
   MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC  0x91
   MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
   MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
  >;
 };

 pinctrl_gpio_led: gpioledgrp {
  fsl,pins = <
   MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12  0x19
  >;
 };

 pinctrl_i2c1: i2c1grp {
  fsl,pins = <
   MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL   0x400001c3
   MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA   0x400001c3
  >;
 };

 pinctrl_i2c2: i2c2grp {
  fsl,pins = <
   MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL   0x400001c3
   MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA   0x400001c3
  >;
 };

 pinctrl_i2c3: i2c3grp {
  fsl,pins = <
   MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL   0x400001c3
   MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA   0x400001c3
  >;
 };

 pinctrl_i2c4: i2c4grp {
  fsl,pins = <
   MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL   0x400001c3
   MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA   0x400001c3
  >;
 };

 pinctrl_pmic: pmicgrp {
  fsl,pins = <
   MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3  0x41
  >;
 };

 pinctrl_pwm_backlight: pwmbacklightgrp {
  fsl,pins = <
   MX8MM_IOMUXC_GPIO1_IO13_PWM2_OUT  0x03
  >;
 };


 pinctrl_sai2: sai2grp {
  fsl,pins = <
   MX8MM_IOMUXC_SAI2_MCLK_SAI2_MCLK  0xd6
   MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC  0xd6
   MX8MM_IOMUXC_SAI2_RXFS_SAI2_RX_SYNC  0xd6
   MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK  0xd6
   MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0  0xd6
   MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0  0xd6
  >;
 };

 pinctrl_uart1: uart1grp {
  fsl,pins = <
   MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX  0x140
   MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX  0x140
  >;
 };

 pinctrl_uart2: uart2grp {
  fsl,pins = <
   MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX  0x140
   MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX  0x140
  >;
 };

 pinctrl_uart3: uart3grp {
  fsl,pins = <
   MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX  0x49
   MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX  0x49
  >;
 };

 pinctrl_uart4: uart4grp {
  fsl,pins = <
   MX8MM_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B 0x140
   MX8MM_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX  0x140
   MX8MM_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B  0x140
   MX8MM_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX  0x140
  >;
 };

 pinctrl_usdhc1_gpio: usdhc1grpgpiogrp {
  fsl,pins = <
   MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10  0x41
  >;
 };

 pinctrl_usdhc1: usdhc1grp {
  fsl,pins = <
   MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK   0x190
   MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD   0x1d0
   MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0  0x1d0
   MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1  0x1d0
   MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2  0x1d0
   MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3  0x1d0
   MX8MM_IOMUXC_GPIO1_IO03_USDHC1_VSELECT  0x1d0
  >;
 };

 pinctrl_usdhc1_100mhz: usdhc1grp100mhzgrp {
  fsl,pins = <
   MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK   0x194
   MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD   0x1d4
   MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0  0x1d4
   MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1  0x1d4
   MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2  0x1d4
   MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3  0x1d4
   MX8MM_IOMUXC_GPIO1_IO03_USDHC1_VSELECT  0x1d0
  >;
 };

 pinctrl_usdhc1_200mhz: usdhc1grp200mhzgrp {
  fsl,pins = <
   MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK   0x196
   MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD   0x1d6
   MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0  0x1d6
   MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1  0x1d6
   MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2  0x1d6
   MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3  0x1d6
   MX8MM_IOMUXC_GPIO1_IO03_USDHC1_VSELECT  0x1d0
  >;
 };

 pinctrl_usdhc2_gpio: usdhc2grpgpiogrp {
  fsl,pins = <
   MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19  0x41
   MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12  0x41
   MX8MM_IOMUXC_SD2_WP_GPIO2_IO20   0x00
  >;
 };

 pinctrl_usdhc2: usdhc2grp {
  fsl,pins = <
   MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK   0x190
   MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD   0x1d0
   MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0  0x1d0
   MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1  0x1d0
   MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2  0x1d0
   MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3  0x1d0
   MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT  0x1d0
  >;
 };

 pinctrl_usdhc2_100mhz: usdhc2grp100mhzgrp {
  fsl,pins = <
   MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK   0x194
   MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD   0x1d4
   MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0  0x1d4
   MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1  0x1d4
   MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2  0x1d4
   MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3  0x1d4
   MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT  0x1d0
  >;
 };

 pinctrl_usdhc2_200mhz: usdhc2grp200mhzgrp {
  fsl,pins = <
   MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK   0x196
   MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD   0x1d6
   MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0  0x1d6
   MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1  0x1d6
   MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2  0x1d6
   MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3  0x1d6
   MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT  0x1d0
  >;
 };

 pinctrl_usdhc3: usdhc3grp {
  fsl,pins = <
   MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK  0x40000190
   MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD  0x1d0
   MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0  0x1d0
   MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1  0x1d0
   MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2  0x1d0
   MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3  0x1d0
   MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4  0x1d0
   MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5  0x1d0
   MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6  0x1d0
   MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7  0x1d0
   MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE  0x190
  >;
 };

 pinctrl_usdhc3_100mhz: usdhc3grp100mhzgrp {
  fsl,pins = <
   MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK  0x40000194
   MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD  0x1d4
   MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0  0x1d4
   MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1  0x1d4
   MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2  0x1d4
   MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3  0x1d4
   MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4  0x1d4
   MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5  0x1d4
   MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6  0x1d4
   MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7  0x1d4
   MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE  0x194
  >;
 };

 pinctrl_usdhc3_200mhz: usdhc3grp200mhzgrp {
  fsl,pins = <
   MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK  0x40000196
   MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD  0x1d6
   MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0  0x1d6
   MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1  0x1d6
   MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2  0x1d6
   MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3  0x1d6
   MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4  0x1d6
   MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5  0x1d6
   MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6  0x1d6
   MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7  0x1d6
   MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE  0x196
  >;
 };

 pinctrl_wdog: wdoggrp {
  fsl,pins = <
   MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B  0xc6
  >;
 };
};