Quelle  mt8186-corsola-starmie.dtsi   Sprache: unbekannt

// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
 * Copyright 2023 Google LLC
 */

/dts-v1/;
#include "mt8186-corsola.dtsi"

/ {
 en_pp6000_mipi_disp_150ma: en-pp6000-mipi-disp-150ma {
  compatible = "regulator-fixed";
  regulator-name = "en_pp6000_mipi_disp_150ma";
  gpio = <&pio 154 GPIO_ACTIVE_HIGH>;
  enable-active-high;
  pinctrl-names = "default";
  pinctrl-0 = <&en_pp6000_mipi_disp_150ma_fixed_pins>;
 };

 /*
  * Starmie does not have 3.3V display regulator. It is replaced
  * with 6V module for enabling panel, re-using eDP GPIOs.
  */
 /delete-node/ pp3300_disp_x;
 en_pp6000_mipi_disp: en-regulator-pp6000-mipi-disp {
  compatible = "regulator-fixed";
  pinctrl-names = "default";
  pinctrl-0 = <&edp_panel_fixed_pins>;
  gpios = <&pio 153 GPIO_ACTIVE_HIGH>;
  regulator-name = "en_pp6000_mipi_disp";
  enable-active-high;
  regulator-enable-ramp-delay = <3000>;
  vin-supply = <&pp3300_z2>;
 };

 tboard_thermistor1: thermal-sensor1 {
  compatible = "generic-adc-thermal";
  #thermal-sensor-cells = <0>;
  io-channels = <&auxadc 0>;
  io-channel-names = "sensor-channel";
  temperature-lookup-table = <    (-5000) 1492
      0 1413
      5000 1324
      10000 1227
      15000 1121
      20000 1017
      25000 900
      30000 797
      35000 698
      40000 606
      45000 522
      50000 449
      55000 383
      60000 327
      65000 278
      70000 236
      75000 201
      80000 171
      85000 145
      90000 163
      95000 124
      100000 91
      105000 78
      110000 67
      115000 58
      120000 50
      125000 44>;
 };

 tboard_thermistor2: thermal-sensor2 {
  compatible = "generic-adc-thermal";
  #thermal-sensor-cells = <0>;
  io-channels = <&auxadc 1>;
  io-channel-names = "sensor-channel";
  temperature-lookup-table = <    (-5000) 1492
      0 1413
      5000 1324
      10000 1227
      15000 1121
      20000 1017
      25000 900
      30000 797
      35000 698
      40000 606
      45000 522
      50000 449
      55000 383
      60000 327
      65000 278
      70000 236
      75000 201
      80000 171
      85000 145
      90000 163
      95000 124
      100000 91
      105000 78
      110000 67
      115000 58
      120000 50
      125000 44>;
 };
};

/*
 * Starmie does not have EC keyboard. Remove default keyboard controller
 * and replace it with the driver for side switches.
 */
/delete-node/ &keyboard_controller;

&cros_ec {
 cbas: cbas {
  compatible = "google,cros-cbas";
 };

 keyboard-controller {
  compatible = "google,cros-ec-keyb-switches";
 };
};

&dsi0 {
 #address-cells = <1>;
 #size-cells = <0>;
 panel: panel@0 {
  /* compatible will be set in board dts */
  reg = <0>;
  enable-gpios = <&pio 98 0>;
  pinctrl-names = "default";
  pinctrl-0 = <&panel_default_pins>;
  avdd-supply = <&en_pp6000_mipi_disp>;
  avee-supply = <&en_pp6000_mipi_disp_150ma>;
  pp1800-supply = <&mt6366_vio18_reg>;
  backlight = <&backlight_lcd0>;
  rotation = <270>;
  port {
   panel_in: endpoint {
    remote-endpoint = <&dsi_out>;
   };
  };
 };
};

&dsi_out {
 remote-endpoint = <&panel_in>;
};

&i2c0 {
 status = "disabled";
};

&i2c2 {
 status = "disabled";
};

&i2c4 {
 status = "disabled";
};

&i2c5 {
 clock-frequency = <400000>;
};

&mmc1_pins_default {
 pins-clk {
  drive-strength = <8>;
 };

 pins-cmd-dat {
  drive-strength = <8>;
 };
};

&mmc1_pins_uhs {
 pins-clk {
  drive-strength = <8>;
 };

 pins-cmd-dat {
  drive-strength = <8>;
 };
};

&pen_insert {
 wakeup-event-action = <EV_ACT_ANY>;
};

&pio {
 /* 185 lines */
 gpio-line-names = "TP",
     "TP",
     "TP",
     "I2S0_HP_DI",
     "I2S3_DP_SPKR_DO",
     "SAR_INT_ODL",
     "BT_WAKE_AP_ODL",
     "WIFI_INT_ODL",
     "DPBRDG_INT_ODL",
     "NC",
     "EC_AP_HPD_OD",
     "NC",
     "TCHSCR_INT_1V8_ODL",
     "EC_AP_INT_ODL",
     "EC_IN_RW_ODL",
     "GSC_AP_INT_ODL",
     /*
      * AP_FLASH_WP_L is crossystem ABI. Rev1 schematics
      * call it AP_WP_ODL.
      */
     "AP_FLASH_WP_L",
     "HP_INT_ODL",
     "PEN_EJECT_OD",
     "NC",
     "NC",
     "UCAM_SEN_EN",
     "NC",
     "NC",
     "NC",
     "I2S2_DP_SPK_MCK",
     "I2S2_DP_SPKR_BCK",
     "I2S2_DP_SPKR_LRCK",
     "NC",
     "NC",
     "NC",
     "NC",
     "UART_GSC_TX_AP_RX",
     "UART_AP_TX_GSC_RX",
     "UART_DBGCON_TX_ADSP_RX",
     "UART_ADSP_TX_DBGCON_RX",
     "NC",
     "TCHSCR_REPORT_DISABLE",
     "NC",
     "EN_PP1800_DPBRDG",
     "SPI_AP_CLK_EC",
     "SPI_AP_CS_EC_L",
     "SPI_AP_DO_EC_DI",
     "SPI_AP_DI_EC_DO",
     "SPI_AP_CLK_GSC",
     "SPI_AP_CS_GSC_L",
     "SPI_AP_DO_GSC_DI",
     "SPI_AP_DI_GSC_DO",
     "UART_DBGCON_TX_SCP_RX",
     "UART_SCP_TX_DBGCON_RX",
     "EN_PP1200_CAM_X",
     "WLAN_MODULE_RST_L",
     "NC",
     "NC",
     "NC",
     "NC",
     "I2S1_HP_DO",
     "I2S1_HP_BCK",
     "I2S1_HP_LRCK",
     "I2S1_HP_MCK",
     "TCHSCR_RST_1V8_L",
     "SPI_AP_CLK_ROM",
     "SPI_AP_CS_ROM_L",
     "SPI_AP_DO_ROM_DI",
     "SPI_AP_DI_ROM_DO",
     "NC",
     "NC",
     "EMMC_STRB",
     "EMMC_CLK",
     "EMMC_CMD",
     "EMMC_RST_L",
     "EMMC_DATA0",
     "EMMC_DATA1",
     "EMMC_DATA2",
     "EMMC_DATA3",
     "EMMC_DATA4",
     "EMMC_DATA5",
     "EMMC_DATA6",
     "EMMC_DATA7",
     "AP_KPCOL0",
     "NC",
     "NC",
     "NC",
     "TP",
     "SDIO_CLK",
     "SDIO_CMD",
     "SDIO_DATA0",
     "SDIO_DATA1",
     "SDIO_DATA2",
     "SDIO_DATA3",
     "NC",
     "NC",
     "NC",
     "NC",
     "NC",
     "NC",
     "NC",
     "MIPI_BL_PWM_1V8",
     "DISP_RST_1V8_L",
     "MIPI_DPI_CLK",
     "MIPI_DPI_VSYNC",
     "MIPI_DPI_HSYNC",
     "MIPI_DPI_DE",
     "MIPI_DPI_D0",
     "MIPI_DPI_D1",
     "MIPI_DPI_D2",
     "MIPI_DPI_D3",
     "MIPI_DPI_D4",
     "MIPI_DPI_D5",
     "MIPI_DPI_D6",
     "MIPI_DPI_DA7",
     "MIPI_DPI_D8",
     "MIPI_DPI_D9",
     "MIPI_DPI_D10",
     "MIPI_DPI_D11",
     "PCM_BT_CLK",
     "PCM_BT_SYNC",
     "PCM_BT_DI",
     "PCM_BT_DO",
     "JTAG_TMS_TP",
     "JTAG_TCK_TP",
     "JTAG_TDI_TP",
     "JTAG_TDO_TP",
     "JTAG_TRSTN_TP",
     "NC",
     "NC",
     "UCAM_DET_ODL",
     "NC",
     "NC",
     "AP_I2C_TCHSCR_SCL_1V8",
     "AP_I2C_TCHSCR_SDA_1V8",
     "NC",
     "NC",
     "AP_I2C_DPBRDG_SCL_1V8",
     "AP_I2C_DPBRDG_SDA_1V8",
     "NC",
     "NC",
     "AP_I2C_AUD_SCL_1V8",
     "AP_I2C_AUD_SDA_1V8",
     "AP_I2C_DISP_SCL_1V8",
     "AP_I2C_DISP_SDA_1V8",
     "NC",
     "NC",
     "NC",
     "NC",
     "SCP_I2C_SENSOR_SCL_1V8",
     "SCP_I2C_SENSOR_SDA_1V8",
     "AP_EC_WARM_RST_REQ",
     "AP_XHCI_INIT_DONE",
     "USB3_HUB_RST_L",
     "EN_SPKR",
     "BEEP_ON",
     "AP_DISP_BKLTEN",
     "EN_PP6000_MIPI_DISP",
     "EN_PP6000_MIPI_DISP_150MA",
     "BT_KILL_1V8_L",
     "WIFI_KILL_1V8_L",
     "PWRAP_SPI0_CSN",
     "PWRAP_SPI0_CK",
     "PWRAP_SPI0_MO",
     "PWRAP_SPI0_MI",
     "SRCLKENA0",
     "SRCLKENA1",
     "SCP_VREQ_VAO",
     "AP_RTC_CLK32K",
     "AP_PMIC_WDTRST_L",
     "AUD_CLK_MOSI",
     "AUD_SYNC_MOSI",
     "AUD_DAT_MOSI0",
     "AUD_DAT_MOSI1",
     "AUD_CLK_MISO",
     "AUD_SYNC_MISO",
     "AUD_DAT_MISO0",
     "AUD_DAT_MISO1",
     "NC",
     "NC",
     "NC",
     "DPBRDG_RST_L",
     "LTE_W_DISABLE_L",
     "LTE_SAR_DETECT_L",
     "EN_PP3300_LTE_X",
     "LTE_PWR_OFF_L",
     "LTE_RESET_L",
     "TP",
     "TP";

 en_pp6000_mipi_disp_150ma_fixed_pins: en_pp6000-mipi-disp-150ma-fixed-pins {
  pins-en {
   pinmux = <PINMUX_GPIO154__FUNC_GPIO154>;
   output-low;
  };
 };

 panel_default_pins: panel-default-pins {
  pins-en {
   pinmux = <PINMUX_GPIO98__FUNC_GPIO98>;
   output-low;
  };
 };
};

&usb_c1 {
 status = "disabled";
};

&thermal_zones {
 tboard1-thermal {
  polling-delay = <1000>; /* milliseconds */
  polling-delay-passive = <0>; /* milliseconds */
  thermal-sensors = <&tboard_thermistor1>;
 };

 tboard2-thermal {
  polling-delay = <1000>; /* milliseconds */
  polling-delay-passive = <0>; /* milliseconds */
  thermal-sensors = <&tboard_thermistor2>;
 };
};

&wifi_pwrseq {
 reset-gpios = <&pio 51 1>;
};

/*
 * Battery on Starmie is using a different address than default.
 * Remove old node to reuse "battery" alias.
 */
/delete-node/ &battery;
&i2c_tunnel {
 battery: sbs-battery@f {
  compatible = "sbs,sbs-battery";
  reg = <0xf>;
  sbs,i2c-retry-count = <2>;
  sbs,poll-retry-count = <1>;
 };
};