Anforderungen  |   Konzepte  |   Entwurf  |   Entwicklung  |   Qualitätssicherung  |   Lebenszyklus  |   Steuerung
 
 
 
 


Quelle  pumpkin-common.dtsi   Sprache: unbekannt

 
Spracherkennung für: .dtsi vermutete Sprache: Unknown {[0] [0] [0]} [Methode: Schwerpunktbildung, einfache Gewichte, sechs Dimensionen]

// SPDX-License-Identifier: GPL-2.0
/*
 * Copyright (c) 2019 BayLibre, SAS.
 * Author: Fabien Parent <fparent@baylibre.com>
 */

#include <dt-bindings/gpio/gpio.h>

/ {
 aliases {
  serial0 = &uart0;
  ethernet0 = ðernet;
 };

 chosen {
  stdout-path = "serial0:921600n8";
 };

 firmware {
  optee: optee {
   compatible = "linaro,optee-tz";
   method = "smc";
  };
 };

 gpio-keys {
  compatible = "gpio-keys";
  pinctrl-names = "default";
  pinctrl-0 = <&gpio_keys_default>;

  key-volume-up {
   gpios = <&pio 42 GPIO_ACTIVE_LOW>;
   label = "volume_up";
   linux,code = <115>;
   wakeup-source;
   debounce-interval = <15>;
  };

  key-volume-down {
   gpios = <&pio 43 GPIO_ACTIVE_LOW>;
   label = "volume_down";
   linux,code = <114>;
   wakeup-source;
   debounce-interval = <15>;
  };
 };
};

&i2c0 {
 pinctrl-names = "default";
 pinctrl-0 = <&i2c0_pins_a>;
 status = "okay";

 tca6416: gpio@20 {
  compatible = "ti,tca6416";
  reg = <0x20>;
  reset-gpios = <&pio 65 GPIO_ACTIVE_LOW>;
  pinctrl-names = "default";
  pinctrl-0 = <&tca6416_pins>;

  gpio-controller;
  #gpio-cells = <2>;

  eint20-mux-sel0-hog {
   gpio-hog;
   gpios = <0 0>;
   input;
   line-name = "eint20_mux_sel0";
  };

  expcon-mux-sel1-hog {
   gpio-hog;
   gpios = <1 0>;
   input;
   line-name = "expcon_mux_sel1";
  };

  mrg-di-mux-sel2-hog {
   gpio-hog;
   gpios = <2 0>;
   input;
   line-name = "mrg_di_mux_sel2";
  };

  sd-sdio-mux-sel3-hog {
   gpio-hog;
   gpios = <3 0>;
   input;
   line-name = "sd_sdio_mux_sel3";
  };

  sd-sdio-mux-ctrl7-hog {
   gpio-hog;
   gpios = <7 0>;
   output-low;
   line-name = "sd_sdio_mux_ctrl7";
  };

  hw-id0-hog {
   gpio-hog;
   gpios = <8 0>;
   input;
   line-name = "hw_id0";
  };

  hw-id1-hog {
   gpio-hog;
   gpios = <9 0>;
   input;
   line-name = "hw_id1";
  };

  hw-id2-hog {
   gpio-hog;
   gpios = <10 0>;
   input;
   line-name = "hw_id2";
  };

  fg-int-n-hog {
   gpio-hog;
   gpios = <11 0>;
   input;
   line-name = "fg_int_n";
  };

  usba-pwr-en-hog {
   gpio-hog;
   gpios = <12 0>;
   output-high;
   line-name = "usba_pwr_en";
  };

  wifi-3v3-pg-hog {
   gpio-hog;
   gpios = <13 0>;
   input;
   line-name = "wifi_3v3_pg";
  };

  cam-rst-hog {
   gpio-hog;
   gpios = <14 0>;
   output-low;
   line-name = "cam_rst";
  };

  cam-pwdn-hog {
   gpio-hog;
   gpios = <15 0>;
   output-low;
   line-name = "cam_pwdn";
  };
 };
};

&i2c2 {
 pinctrl-names = "default";
 pinctrl-0 = <&i2c2_pins_a>;
 status = "okay";
};

&uart0 {
 status = "okay";
};

ðernet {
 pinctrl-names = "default";
 pinctrl-0 = <ðernet_pins_default>;
 phy-handle = <ð_phy>;
 phy-mode = "rmii";
 mac-address = [00 00 00 00 00 00];
 status = "okay";

 mdio {
  #address-cells = <1>;
  #size-cells = <0>;

  eth_phy: ethernet-phy@0 {
   reg = <0>;
  };
 };
};

&usb0 {
 status = "okay";
 dr_mode = "peripheral";
 usb-role-switch;

 usb_con: connector {
  compatible = "usb-c-connector";
  label = "USB-C";
 };
};

&usb_phy {
 status = "okay";
};

&pio {
 gpio_keys_default: gpiodefault {
  pins_cmd_dat {
   pinmux = <MT8516_PIN_42_KPCOL0__FUNC_GPIO42>,
     <MT8516_PIN_43_KPCOL1__FUNC_GPIO43>;
   bias-pull-up;
   input-enable;
  };
 };

 i2c0_pins_a: i2c0 {
  pins1 {
   pinmux = <MT8516_PIN_58_SDA0__FUNC_SDA0_0>,
     <MT8516_PIN_59_SCL0__FUNC_SCL0_0>;
   bias-disable;
  };
 };

 i2c2_pins_a: i2c2 {
  pins1 {
   pinmux = <MT8516_PIN_60_SDA2__FUNC_SDA2_0>,
     <MT8516_PIN_61_SCL2__FUNC_SCL2_0>;
   bias-disable;
  };
 };

 tca6416_pins: pinmux_tca6416_pins {
  gpio_mux_rst_n_pin {
   pinmux = <MT8516_PIN_65_UTXD1__FUNC_GPIO65>;
   output-high;
  };

  gpio_mux_int_n_pin {
   pinmux = <MT8516_PIN_64_URXD1__FUNC_GPIO64>;
   input-enable;
   bias-pull-up;
  };
 };

 ethernet_pins_default: ethernet {
  pins_ethernet {
   pinmux = <MT8516_PIN_0_EINT0__FUNC_EXT_TXD0>,
     <MT8516_PIN_1_EINT1__FUNC_EXT_TXD1>,
     <MT8516_PIN_5_EINT5__FUNC_EXT_RXER>,
     <MT8516_PIN_6_EINT6__FUNC_EXT_RXC>,
     <MT8516_PIN_7_EINT7__FUNC_EXT_RXDV>,
     <MT8516_PIN_8_EINT8__FUNC_EXT_RXD0>,
     <MT8516_PIN_9_EINT9__FUNC_EXT_RXD1>,
     <MT8516_PIN_12_EINT12__FUNC_EXT_TXEN>,
     <MT8516_PIN_38_MRG_DI__FUNC_EXT_MDIO>,
     <MT8516_PIN_39_MRG_DO__FUNC_EXT_MDC>;
  };
 };
};

[ Dauer der Verarbeitung: 0.28 Sekunden  ]

                                                                                                                                                                                                                                                                                                                                                                                                     


Neuigkeiten

     Aktuelles
     Motto des Tages

Software

     Produkte
     Quellcodebibliothek

Aktivitäten

     Artikel über Sicherheit
     Anleitung zur Aktivierung von SSL

Muße

     Gedichte
     Musik
     Bilder

Jenseits des Üblichen ....
    

Besucherstatistik

Besucherstatistik

Monitoring

Montastic status badge