Anforderungen  |   Konzepte  |   Entwurf  |   Entwicklung  |   Qualitätssicherung  |   Lebenszyklus  |   Steuerung
 
 
 
 


Quelle  tegra186-p3310.dtsi   Sprache: unbekannt

 
Spracherkennung für: .dtsi vermutete Sprache: Unknown {[0] [0] [0]} [Methode: Schwerpunktbildung, einfache Gewichte, sechs Dimensionen]

// SPDX-License-Identifier: GPL-2.0
#include "tegra186.dtsi"

#include <dt-bindings/mfd/max77620.h>

/ {
 model = "NVIDIA Jetson TX2";
 compatible = "nvidia,p3310", "nvidia,tegra186";

 aliases {
  ethernet0 = "/ethernet@2490000";
  i2c0 = "/bpmp/i2c";
  i2c1 = "/i2c@3160000";
  i2c2 = "/i2c@c240000";
  i2c3 = "/i2c@3180000";
  i2c4 = "/i2c@3190000";
  i2c5 = "/i2c@31c0000";
  i2c6 = "/i2c@c250000";
  i2c7 = "/i2c@31e0000";
  mmc0 = "/mmc@3460000";
  mmc1 = "/mmc@3400000";
  serial0 = &uarta;
 };

 chosen {
  bootargs = "earlycon console=ttyS0,115200n8 fw_devlink=on";
  stdout-path = "serial0:115200n8";
 };

 memory@80000000 {
  device_type = "memory";
  reg = <0x0 0x80000000 0x2 0x00000000>;
 };

 ethernet@2490000 {
  status = "okay";

  phy-reset-gpios = <&gpio TEGRA186_MAIN_GPIO(M, 4)
      GPIO_ACTIVE_LOW>;
  phy-handle = <&phy>;
  phy-mode = "rgmii";

  mdio {
   #address-cells = <1>;
   #size-cells = <0>;

   phy: ethernet-phy@0 {
    compatible = "ethernet-phy-ieee802.3-c22";
    reg = <0x0>;
    interrupt-parent = <&gpio>;
    interrupts = <TEGRA186_MAIN_GPIO(M, 5)
           IRQ_TYPE_LEVEL_LOW>;

    #phy-cells = <0>;
   };
  };
 };

 memory-controller@2c00000 {
  status = "okay";
 };

 serial@3100000 {
  /delete-property/ dmas;
  /delete-property/ dma-names;
  status = "okay";
 };

 i2c@3160000 {
  status = "okay";

  power-monitor@40 {
   compatible = "ti,ina3221";
   reg = <0x40>;
   #address-cells = <1>;
   #size-cells = <0>;

   input@0 {
    reg = <0x0>;
    label = "VDD_SYS_GPU";
    shunt-resistor-micro-ohms = <10000>;
   };

   input@1 {
    reg = <0x1>;
    label = "VDD_SYS_SOC";
    shunt-resistor-micro-ohms = <10000>;
   };

   input@2 {
    reg = <0x2>;
    label = "VDD_3V8_WIFI";
    shunt-resistor-micro-ohms = <10000>;
   };
  };

  power-monitor@41 {
   compatible = "ti,ina3221";
   reg = <0x41>;
   #address-cells = <1>;
   #size-cells = <0>;

   input@0 {
    reg = <0x0>;
    label = "VDD_IN";
    shunt-resistor-micro-ohms = <5000>;
   };

   input@1 {
    reg = <0x1>;
    label = "VDD_SYS_CPU";
    shunt-resistor-micro-ohms = <10000>;
   };

   input@2 {
    reg = <0x2>;
    label = "VDD_5V0_DDR";
    shunt-resistor-micro-ohms = <10000>;
   };
  };
 };

 i2c@3180000 {
  status = "okay";
 };

 ddc: i2c@3190000 {
  status = "okay";
 };

 i2c@31c0000 {
  status = "okay";
 };

 i2c@31e0000 {
  status = "okay";
 };

 /* SDMMC1 (SD/MMC) */
 mmc@3400000 {
  cd-gpios = <&gpio TEGRA186_MAIN_GPIO(P, 5) GPIO_ACTIVE_LOW>;
  wp-gpios = <&gpio TEGRA186_MAIN_GPIO(P, 4) GPIO_ACTIVE_HIGH>;

  vqmmc-supply = <&vddio_sdmmc1>;
 };

 /* SDMMC3 (SDIO) */
 mmc@3440000 {
  status = "okay";
  vqmmc-supply = <&vddio_sdmmc3>;
 };

 /* SDMMC4 (eMMC) */
 mmc@3460000 {
  status = "okay";
  bus-width = <8>;
  non-removable;

  vqmmc-supply = <&vdd_1v8_ap>;
  vmmc-supply = <&vdd_3v3_sys>;
 };

 hsp@3c00000 {
  status = "okay";
 };

 i2c@c240000 {
  status = "okay";
 };

 i2c@c250000 {
  status = "okay";

  /* module ID EEPROM */
  eeprom@50 {
   compatible = "atmel,24c02";
   reg = <0x50>;

   label = "module";
   vcc-supply = <&vdd_1v8>;
   address-width = <8>;
   pagesize = <8>;
   size = <256>;
   read-only;
  };
 };

 rtc@c2a0000 {
  status = "okay";
 };

 pmc@c360000 {
  nvidia,invert-interrupt;
 };

 gpu@17000000 {
  status = "okay";
 };

 bpmp {
  i2c {
   status = "okay";

   pmic: pmic@3c {
    compatible = "maxim,max77620";
    reg = <0x3c>;

    interrupt-parent = <&pmc>;
    interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
    #interrupt-cells = <2>;
    interrupt-controller;

    #gpio-cells = <2>;
    gpio-controller;

    pinctrl-names = "default";
    pinctrl-0 = <&max77620_default>;

    fps {
     fps0 {
      maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
      maxim,shutdown-fps-time-period-us = <640>;
     };

     fps1 {
      maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
      maxim,shutdown-fps-time-period-us = <640>;
     };

     fps2 {
      maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
      maxim,shutdown-fps-time-period-us = <640>;
     };
    };

    max77620_default: pinmux {
     gpio0 {
      pins = "gpio0";
      function = "gpio";
     };

     gpio1 {
      pins = "gpio1";
      function = "fps-out";
      maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
     };

     gpio2 {
      pins = "gpio2";
      function = "fps-out";
      maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
     };

     gpio3 {
      pins = "gpio3";
      function = "fps-out";
      maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
     };

     gpio4 {
      pins = "gpio4";
      function = "32k-out1";
      drive-push-pull = <1>;
     };

     gpio5 {
      pins = "gpio5";
      function = "gpio";
      drive-push-pull = <0>;
     };

     gpio6 {
      pins = "gpio6";
      function = "gpio";
      drive-push-pull = <1>;
     };

     gpio7 {
      pins = "gpio7";
      function = "gpio";
      drive-push-pull = <0>;
     };
    };

    regulators {
     in-sd0-supply = <&vdd_5v0_sys>;
     in-sd1-supply = <&vdd_5v0_sys>;
     in-sd2-supply = <&vdd_5v0_sys>;
     in-sd3-supply = <&vdd_5v0_sys>;

     in-ldo0-1-supply = <&vdd_5v0_sys>;
     in-ldo2-supply = <&vdd_5v0_sys>;
     in-ldo3-5-supply = <&vdd_5v0_sys>;
     in-ldo4-6-supply = <&vdd_1v8>;
     in-ldo7-8-supply = <&avdd_dsi_csi>;

     sd0 {
      regulator-name = "VDD_DDR_1V1_PMIC";
      regulator-min-microvolt = <1100000>;
      regulator-max-microvolt = <1100000>;
      regulator-always-on;
      regulator-boot-on;
     };

     avdd_dsi_csi: sd1 {
      regulator-name = "AVDD_DSI_CSI_1V2";
      regulator-min-microvolt = <1200000>;
      regulator-max-microvolt = <1200000>;
     };

     vdd_1v8: sd2 {
      regulator-name = "VDD_1V8";
      regulator-min-microvolt = <1800000>;
      regulator-max-microvolt = <1800000>;
     };

     vdd_3v3_sys: sd3 {
      regulator-name = "VDD_3V3_SYS";
      regulator-min-microvolt = <3300000>;
      regulator-max-microvolt = <3300000>;
     };

     vdd_1v8_pll: ldo0 {
      regulator-name = "VDD_1V8_AP_PLL";
      regulator-min-microvolt = <1800000>;
      regulator-max-microvolt = <1800000>;
     };

     ldo2 {
      regulator-name = "VDDIO_3V3_AOHV";
      regulator-min-microvolt = <3300000>;
      regulator-max-microvolt = <3300000>;
      regulator-always-on;
      regulator-boot-on;
     };

     vddio_sdmmc1: ldo3 {
      regulator-name = "VDDIO_SDMMC1_AP";
      regulator-min-microvolt = <1800000>;
      regulator-max-microvolt = <3300000>;
     };

     ldo4 {
      regulator-name = "VDD_RTC";
      regulator-min-microvolt = <1000000>;
      regulator-max-microvolt = <1000000>;
     };

     vddio_sdmmc3: ldo5 {
      regulator-name = "VDDIO_SDMMC3_AP";
      regulator-min-microvolt = <2800000>;
      regulator-max-microvolt = <2800000>;
     };

     vdd_hdmi_1v05: ldo7 {
      regulator-name = "VDD_HDMI_1V05";
      regulator-min-microvolt = <1050000>;
      regulator-max-microvolt = <1050000>;
     };

     vdd_pex: ldo8 {
      regulator-name = "VDD_PEX_1V05";
      regulator-min-microvolt = <1050000>;
      regulator-max-microvolt = <1050000>;
     };
    };
   };
  };
 };

 cpus {
  cpu@0 {
   enable-method = "psci";
  };

  cpu@1 {
   enable-method = "psci";
  };

  cpu@2 {
   enable-method = "psci";
  };

  cpu@3 {
   enable-method = "psci";
  };

  cpu@4 {
   enable-method = "psci";
  };

  cpu@5 {
   enable-method = "psci";
  };
 };

 psci {
  compatible = "arm,psci-1.0";
  status = "okay";
  method = "smc";
 };

 gnd: regulator-gnd {
  compatible = "regulator-fixed";
  regulator-name = "GND";
  regulator-min-microvolt = <0>;
  regulator-max-microvolt = <0>;
  regulator-always-on;
  regulator-boot-on;
 };

 vdd_5v0_sys: regulator-vdd-5v0-sys {
  compatible = "regulator-fixed";
  regulator-name = "VDD_5V0_SYS";
  regulator-min-microvolt = <5000000>;
  regulator-max-microvolt = <5000000>;
  regulator-always-on;
  regulator-boot-on;
 };

 vdd_1v8_ap: regulator-vdd-1v8-ap {
  compatible = "regulator-fixed";
  regulator-name = "VDD_1V8_AP";
  regulator-min-microvolt = <1800000>;
  regulator-max-microvolt = <1800000>;

  gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
  enable-active-high;

  vin-supply = <&vdd_1v8>;
 };
};

[ Dauer der Verarbeitung: 0.29 Sekunden  ]

                                                                                                                                                                                                                                                                                                                                                                                                     


Neuigkeiten

     Aktuelles
     Motto des Tages

Software

     Produkte
     Quellcodebibliothek

Aktivitäten

     Artikel über Sicherheit
     Anleitung zur Aktivierung von SSL

Muße

     Gedichte
     Musik
     Bilder

Jenseits des Üblichen ....
    

Besucherstatistik

Besucherstatistik

Monitoring

Montastic status badge