Anforderungen  |   Konzepte  |   Entwurf  |   Entwicklung  |   Qualitätssicherung  |   Lebenszyklus  |   Steuerung
 
 
 
 


Quelle  msm8916-wingtech-wt865x8.dtsi   Sprache: unbekannt

 
Spracherkennung für: .dtsi vermutete Sprache: Unknown {[0] [0] [0]} [Methode: Schwerpunktbildung, einfache Gewichte, sechs Dimensionen]

// SPDX-License-Identifier: GPL-2.0-only

#include "msm8916-pm8916.dtsi"
#include "msm8916-modem-qdsp6.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>

/ {
 aliases {
  mmc0 = &sdhc_1; /* eMMC */
  mmc1 = &sdhc_2; /* SD card */
  serial0 = &blsp_uart2;
 };

 chosen {
  stdout-path = "serial0";
 };

 headphones_switch: audio-switch {
  compatible = "simple-audio-amplifier";

  pinctrl-0 = <&headphones_switch_default>;
  pinctrl-names = "default";

  enable-gpios = <&tlmm 120 GPIO_ACTIVE_HIGH>;
  sound-name-prefix = "Headphones Switch";
 };

 backlight: backlight {
  compatible = "pwm-backlight";
  pwms = <&pm8916_pwm 0 100000>;

  brightness-levels = <0 255>;
  num-interpolated-steps = <255>;
  default-brightness-level = <255>;
 };

 battery: battery {
  compatible = "simple-battery";
  voltage-min-design-microvolt = <3400000>;
  voltage-max-design-microvolt = <4350000>;
  energy-full-design-microwatt-hours = <8740000>;
  charge-full-design-microamp-hours = <2300000>;

  ocv-capacity-celsius = <25>;
  ocv-capacity-table-0 = <4328000 100>, <4266000 95>, <4208000 90>,
   <4154000 85>, <4102000 80>, <4062000 75>, <3992000 70>,
   <3960000 65>, <3914000 60>, <3870000 55>, <3840000 50>,
   <3818000 45>, <3800000 40>, <3784000 35>, <3770000 30>,
   <3756000 25>, <3736000 20>, <3714000 16>, <3696000 13>,
   <3690000 11>, <3689000 10>, <3688000 9>, <3686000 8>,
   <3682000 7>, <3670000 6>, <3639000 5>, <3592000 4>,
   <3530000 3>, <3448000 2>, <3320000 1>, <3000000 0>;
 };

 gpio-keys {
  compatible = "gpio-keys";

  pinctrl-0 = <&gpio_keys_default>;
  pinctrl-names = "default";

  label = "GPIO Buttons";

  volume-up-button {
   label = "Volume Up";
   gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
   linux,code = <KEY_VOLUMEUP>;
  };
 };
};

&blsp_i2c5 {
 status = "okay";

 touchscreen@38 {
  compatible = "edt,edt-ft5306";
  reg = <0x38>;

  interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>;

  vcc-supply = <&pm8916_l17>;
  iovcc-supply = <&pm8916_l6>;

  reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;

  touchscreen-size-x = <720>;
  touchscreen-size-y = <1280>;

  pinctrl-0 = <&touchscreen_default>;
  pinctrl-names = "default";
 };
};

&blsp_uart2 {
 pinctrl-0 = <&blsp_uart2_console_default>;
 pinctrl-1 = <&blsp_uart2_console_sleep>;
 pinctrl-names = "default", "sleep";
 status = "okay";
};

&mpss_mem {
 reg = <0x0 0x86800000 0x0 0x5500000>;
};

&pm8916_bms {
 monitored-battery = <&battery>;
 status = "okay";
};

&pm8916_codec {
 qcom,micbias-lvl = <2800>;
 qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
 qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
 qcom,hphl-jack-type-normally-open;
};

&pm8916_pwm {
 pinctrl-0 = <&pwm_out>;
 pinctrl-names = "default";
 status = "okay";
};

&pm8916_resin {
 linux,code = <KEY_VOLUMEDOWN>;
 status = "okay";
};

&pm8916_rpm_regulators {
 pm8916_l17: l17 {
  regulator-min-microvolt = <2850000>;
  regulator-max-microvolt = <2850000>;
 };
};

&pm8916_vib {
 status = "okay";
};

&sdhc_1 {
 status = "okay";
};

&sdhc_2 {
 pinctrl-0 = <&sdc2_default>;
 pinctrl-1 = <&sdc2_sleep>;
 pinctrl-names = "default", "sleep";

 non-removable;

 status = "okay";
};

&usb {
 status = "okay";
};

&venus {
 status = "okay";
};

&venus_mem {
 status = "okay";
};

&wcnss {
 status = "okay";
};

&wcnss_iris {
 compatible = "qcom,wcn3620";
};

&wcnss_mem {
 status = "okay";
};

&tlmm {
 gpio_keys_default: gpio-keys-default-state {
  pins = "gpio107";
  function = "gpio";
  drive-strength = <2>;
  bias-pull-up;
 };

 headphones_switch_default: headphones-switch-default-state {
  pins = "gpio120";
  function = "gpio";
  drive-strength = <2>;
  bias-disable;
 };

 touchscreen_default: touchscreen-default-state {
  touchscreen-pins {
   pins = "gpio13";
   function = "gpio";
   drive-strength = <2>;
   bias-pull-up;
  };

  reset-pins {
   pins = "gpio12";
   function = "gpio";
   drive-strength = <2>;
   bias-disable;
  };
 };
};

&pm8916_mpps {
 pwm_out: mpp4-state {
  pins = "mpp4";
  function = "digital";
  power-source = <PM8916_MPP_VPH>;
  output-low;
  qcom,dtest = <1>;
 };
};

[ Dauer der Verarbeitung: 0.25 Sekunden  ]

                                                                                                                                                                                                                                                                                                                                                                                                     


Neuigkeiten

     Aktuelles
     Motto des Tages

Software

     Produkte
     Quellcodebibliothek

Aktivitäten

     Artikel über Sicherheit
     Anleitung zur Aktivierung von SSL

Muße

     Gedichte
     Musik
     Bilder

Jenseits des Üblichen ....
    

Besucherstatistik

Besucherstatistik

Monitoring

Montastic status badge