Quelle  qcs615-ride.dts   Sprache: unbekannt

// SPDX-License-Identifier: BSD-3-Clause
/*
 * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
 */
/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include <dt-bindings/gpio/gpio.h>
#include "qcs615.dtsi"
#include "pm8150.dtsi"
/ {
 model = "Qualcomm Technologies, Inc. QCS615 Ride";
 compatible = "qcom,qcs615-ride", "qcom,qcs615";
 chassis-type = "embedded";

 aliases {
  mmc0 = &sdhc_1;
  mmc1 = &sdhc_2;
  serial0 = &uart0;
 };

 chosen {
  stdout-path = "serial0:115200n8";
 };

 clocks {
  sleep_clk: sleep-clk {
   compatible = "fixed-clock";
   clock-frequency = <32000>;
   #clock-cells = <0>;
  };

  xo_board_clk: xo-board-clk {
   compatible = "fixed-clock";
   clock-frequency = <38400000>;
   #clock-cells = <0>;
  };
 };

 regulator-usb2-vbus {
  compatible = "regulator-fixed";
  regulator-name = "USB2_VBUS";
  gpio = <&pm8150_gpios 10 GPIO_ACTIVE_HIGH>;
  pinctrl-0 = <&usb2_en>;
  pinctrl-names = "default";
  enable-active-high;
  regulator-always-on;
 };
};

&apps_rsc {
 regulators-0 {
  compatible = "qcom,pm8150-rpmh-regulators";
  qcom,pmic-id = "a";

  vreg_s3a: smps3 {
   regulator-name = "vreg_s3a";
   regulator-min-microvolt = <600000>;
   regulator-max-microvolt = <650000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_s4a: smps4 {
   regulator-name = "vreg_s4a";
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1829000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_s5a: smps5 {
   regulator-name = "vreg_s5a";
   regulator-min-microvolt = <1896000>;
   regulator-max-microvolt = <2040000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_s6a: smps6 {
   regulator-name = "vreg_s6a";
   regulator-min-microvolt = <1304000>;
   regulator-max-microvolt = <1404000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l1a: ldo1 {
   regulator-name = "vreg_l1a";
   regulator-min-microvolt = <488000>;
   regulator-max-microvolt = <852000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l2a: ldo2 {
   regulator-name = "vreg_l2a";
   regulator-min-microvolt = <1650000>;
   regulator-max-microvolt = <3100000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l3a: ldo3 {
   regulator-name = "vreg_l3a";
   regulator-min-microvolt = <1000000>;
   regulator-max-microvolt = <1248000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l5a: ldo5 {
   regulator-name = "vreg_l5a";
   regulator-min-microvolt = <875000>;
   regulator-max-microvolt = <975000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l7a: ldo7 {
   regulator-name = "vreg_l7a";
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1900000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l8a: ldo8 {
   regulator-name = "vreg_l8a";
   regulator-min-microvolt = <1150000>;
   regulator-max-microvolt = <1350000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l10a: ldo10 {
   regulator-name = "vreg_l10a";
   regulator-min-microvolt = <2950000>;
   regulator-max-microvolt = <3312000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l11a: ldo11 {
   regulator-name = "vreg_l11a";
   regulator-min-microvolt = <1232000>;
   regulator-max-microvolt = <1260000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l12a: ldo12 {
   regulator-name = "vreg_l12a";
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1890000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l13a: ldo13 {
   regulator-name = "vreg_l13a";
   regulator-min-microvolt = <3000000>;
   regulator-max-microvolt = <3230000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l15a: ldo15 {
   regulator-name = "vreg_l15a";
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1904000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l16a: ldo16 {
   regulator-name = "vreg_l16a";
   regulator-min-microvolt = <3000000>;
   regulator-max-microvolt = <3312000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l17a: ldo17 {
   regulator-name = "vreg_l17a";
   regulator-min-microvolt = <2950000>;
   regulator-max-microvolt = <3312000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };
 };
};

&gcc {
 clocks = <&rpmhcc RPMH_CXO_CLK>,
   <&rpmhcc RPMH_CXO_CLK_A>,
   <&sleep_clk>;
};

&pm8150_gpios {
 usb2_en: usb2-en-state {
  pins = "gpio10";
  function = "normal";
  output-enable;
  power-source = <0>;
 };
};

&pon_pwrkey {
 status = "okay";
};

&pon_resin {
 linux,code = <KEY_VOLUMEDOWN>;

 status = "okay";
};

&qupv3_id_0 {
 status = "okay";
};

&remoteproc_adsp {
 firmware-name = "qcom/qcs615/adsp.mbn";

 status = "okay";
};

&remoteproc_cdsp {
 firmware-name = "qcom/qcs615/cdsp.mbn";

 status = "okay";
};

&rpmhcc {
 clocks = <&xo_board_clk>;
};

&sdhc_1 {
 pinctrl-0 = <&sdc1_state_on>;
 pinctrl-1 = <&sdc1_state_off>;
 pinctrl-names = "default", "sleep";

 bus-width = <8>;
 mmc-ddr-1_8v;
 mmc-hs200-1_8v;
 mmc-hs400-1_8v;
 mmc-hs400-enhanced-strobe;
 vmmc-supply = <&vreg_l17a>;
 vqmmc-supply = <&vreg_s4a>;

 non-removable;
 no-sd;
 no-sdio;

 status = "okay";
};

&sdhc_2 {
 pinctrl-0 = <&sdc2_state_on>;
 pinctrl-1 = <&sdc2_state_off>;
 pinctrl-names = "default", "sleep";

 bus-width = <4>;
 cd-gpios = <&tlmm 99 GPIO_ACTIVE_LOW>;

 vmmc-supply = <&vreg_l10a>;
 vqmmc-supply = <&vreg_s4a>;

 status = "okay";
};

&uart0 {
 status = "okay";
};

&usb_1_hsphy {
 vdd-supply = <&vreg_l5a>;
 vdda-pll-supply = <&vreg_l12a>;
 vdda-phy-dpdm-supply = <&vreg_l13a>;

 status = "okay";
};

&usb_qmpphy {
 vdda-phy-supply = <&vreg_l5a>;
 vdda-pll-supply = <&vreg_l12a>;

 status = "okay";
};

&usb_1 {
 status = "okay";
};

&usb_1_dwc3 {
 dr_mode = "peripheral";
};

&usb_hsphy_2 {
 vdd-supply = <&vreg_l5a>;
 vdda-pll-supply = <&vreg_l12a>;
 vdda-phy-dpdm-supply = <&vreg_l13a>;

 status = "okay";
};

&usb_2 {
 status = "okay";
};

&usb_2_dwc3 {
 dr_mode = "host";
};

&ufs_mem_hc {
 reset-gpios = <&tlmm 123 GPIO_ACTIVE_LOW>;
 vcc-supply = <&vreg_l17a>;
 vcc-max-microamp = <600000>;
 vccq2-supply = <&vreg_s4a>;
 vccq2-max-microamp = <600000>;

 status = "okay";
};

&ufs_mem_phy {
 vdda-phy-supply = <&vreg_l5a>;
 vdda-pll-supply = <&vreg_l12a>;

 status = "okay";
};

&watchdog {
 clocks = <&sleep_clk>;
};