|
|
|
|
Quelle sc8180x.dtsi
Sprache: unbekannt
|
|
Spracherkennung für: .dtsi vermutete Sprache: Unknown {[0] [0] [0]} [Methode: Schwerpunktbildung, einfache Gewichte, sechs Dimensionen]
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
* Copyright (c) 2020-2023, Linaro Limited
*/
#include <dt-bindings/clock/qcom,dispcc-sm8250.h>
#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
#include <dt-bindings/clock/qcom,gcc-sc8180x.h>
#include <dt-bindings/clock/qcom,gpucc-sm8150.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/clock/qcom,sc8180x-camcc.h>
#include <dt-bindings/interconnect/qcom,icc.h>
#include <dt-bindings/interconnect/qcom,osm-l3.h>
#include <dt-bindings/interconnect/qcom,sc8180x.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/phy/phy-qcom-qmp.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
#include <dt-bindings/thermal/thermal.h>
/ {
interrupt-parent = <&intc>;
#address-cells = <2>;
#size-cells = <2>;
clocks {
xo_board_clk: xo-board {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <38400000>;
};
sleep_clk: sleep-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32764>;
clock-output-names = "sleep_clk";
};
};
cpus {
#address-cells = <2>;
#size-cells = <0>;
cpu0: cpu@0 {
device_type = "cpu";
compatible = "qcom,kryo485";
reg = <0x0 0x0>;
enable-method = "psci";
capacity-dmips-mhz = <602>;
next-level-cache = <&l2_0>;
qcom,freq-domain = <&cpufreq_hw 0>;
operating-points-v2 = <&cpu0_opp_table>;
interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
power-domains = <&cpu_pd0>;
power-domain-names = "psci";
#cooling-cells = <2>;
clocks = <&cpufreq_hw 0>;
l2_0: l2-cache {
compatible = "cache";
cache-level = <2>;
cache-unified;
next-level-cache = <&l3_0>;
l3_0: l3-cache {
compatible = "cache";
cache-level = <3>;
cache-unified;
};
};
};
cpu1: cpu@100 {
device_type = "cpu";
compatible = "qcom,kryo485";
reg = <0x0 0x100>;
enable-method = "psci";
capacity-dmips-mhz = <602>;
next-level-cache = <&l2_100>;
qcom,freq-domain = <&cpufreq_hw 0>;
operating-points-v2 = <&cpu0_opp_table>;
interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
power-domains = <&cpu_pd1>;
power-domain-names = "psci";
#cooling-cells = <2>;
clocks = <&cpufreq_hw 0>;
l2_100: l2-cache {
compatible = "cache";
cache-level = <2>;
cache-unified;
next-level-cache = <&l3_0>;
};
};
cpu2: cpu@200 {
device_type = "cpu";
compatible = "qcom,kryo485";
reg = <0x0 0x200>;
enable-method = "psci";
capacity-dmips-mhz = <602>;
next-level-cache = <&l2_200>;
qcom,freq-domain = <&cpufreq_hw 0>;
operating-points-v2 = <&cpu0_opp_table>;
interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
power-domains = <&cpu_pd2>;
power-domain-names = "psci";
#cooling-cells = <2>;
clocks = <&cpufreq_hw 0>;
l2_200: l2-cache {
compatible = "cache";
cache-level = <2>;
cache-unified;
next-level-cache = <&l3_0>;
};
};
cpu3: cpu@300 {
device_type = "cpu";
compatible = "qcom,kryo485";
reg = <0x0 0x300>;
enable-method = "psci";
capacity-dmips-mhz = <602>;
next-level-cache = <&l2_300>;
qcom,freq-domain = <&cpufreq_hw 0>;
operating-points-v2 = <&cpu0_opp_table>;
interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
power-domains = <&cpu_pd3>;
power-domain-names = "psci";
#cooling-cells = <2>;
clocks = <&cpufreq_hw 0>;
l2_300: l2-cache {
compatible = "cache";
cache-unified;
cache-level = <2>;
next-level-cache = <&l3_0>;
};
};
cpu4: cpu@400 {
device_type = "cpu";
compatible = "qcom,kryo485";
reg = <0x0 0x400>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
next-level-cache = <&l2_400>;
qcom,freq-domain = <&cpufreq_hw 1>;
operating-points-v2 = <&cpu4_opp_table>;
interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
power-domains = <&cpu_pd4>;
power-domain-names = "psci";
#cooling-cells = <2>;
clocks = <&cpufreq_hw 1>;
l2_400: l2-cache {
compatible = "cache";
cache-unified;
cache-level = <2>;
next-level-cache = <&l3_0>;
};
};
cpu5: cpu@500 {
device_type = "cpu";
compatible = "qcom,kryo485";
reg = <0x0 0x500>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
next-level-cache = <&l2_500>;
qcom,freq-domain = <&cpufreq_hw 1>;
operating-points-v2 = <&cpu4_opp_table>;
interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
power-domains = <&cpu_pd5>;
power-domain-names = "psci";
#cooling-cells = <2>;
clocks = <&cpufreq_hw 1>;
l2_500: l2-cache {
compatible = "cache";
cache-unified;
cache-level = <2>;
next-level-cache = <&l3_0>;
};
};
cpu6: cpu@600 {
device_type = "cpu";
compatible = "qcom,kryo485";
reg = <0x0 0x600>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
next-level-cache = <&l2_600>;
qcom,freq-domain = <&cpufreq_hw 1>;
operating-points-v2 = <&cpu4_opp_table>;
interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
power-domains = <&cpu_pd6>;
power-domain-names = "psci";
#cooling-cells = <2>;
clocks = <&cpufreq_hw 1>;
l2_600: l2-cache {
compatible = "cache";
cache-unified;
cache-level = <2>;
next-level-cache = <&l3_0>;
};
};
cpu7: cpu@700 {
device_type = "cpu";
compatible = "qcom,kryo485";
reg = <0x0 0x700>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
next-level-cache = <&l2_700>;
qcom,freq-domain = <&cpufreq_hw 1>;
operating-points-v2 = <&cpu4_opp_table>;
interconnects = <&gem_noc MASTER_AMPSS_M0 3 &mc_virt SLAVE_EBI_CH0 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
power-domains = <&cpu_pd7>;
power-domain-names = "psci";
#cooling-cells = <2>;
clocks = <&cpufreq_hw 1>;
l2_700: l2-cache {
compatible = "cache";
cache-unified;
cache-level = <2>;
next-level-cache = <&l3_0>;
};
};
cpu-map {
cluster0 {
core0 {
cpu = <&cpu0>;
};
core1 {
cpu = <&cpu1>;
};
core2 {
cpu = <&cpu2>;
};
core3 {
cpu = <&cpu3>;
};
core4 {
cpu = <&cpu4>;
};
core5 {
cpu = <&cpu5>;
};
core6 {
cpu = <&cpu6>;
};
core7 {
cpu = <&cpu7>;
};
};
};
idle-states {
entry-method = "psci";
little_cpu_sleep_0: cpu-sleep-0-0 {
compatible = "arm,idle-state";
arm,psci-suspend-param = <0x40000004>;
entry-latency-us = <355>;
exit-latency-us = <909>;
min-residency-us = <3934>;
local-timer-stop;
};
big_cpu_sleep_0: cpu-sleep-1-0 {
compatible = "arm,idle-state";
arm,psci-suspend-param = <0x40000004>;
entry-latency-us = <2411>;
exit-latency-us = <1461>;
min-residency-us = <4488>;
local-timer-stop;
};
};
domain-idle-states {
cluster_sleep_apss_off: cluster-sleep-0 {
compatible = "domain-idle-state";
arm,psci-suspend-param = <0x41000044>;
entry-latency-us = <3300>;
exit-latency-us = <3300>;
min-residency-us = <6000>;
};
cluster_sleep_aoss_sleep: cluster-sleep-1 {
compatible = "domain-idle-state";
arm,psci-suspend-param = <0x4100a344>;
entry-latency-us = <3263>;
exit-latency-us = <6562>;
min-residency-us = <9987>;
};
};
};
cpu0_opp_table: opp-table-cpu0 {
compatible = "operating-points-v2";
opp-shared;
opp-300000000 {
opp-hz = /bits/ 64 <300000000>;
opp-peak-kBps = <800000 9600000>;
};
opp-422400000 {
opp-hz = /bits/ 64 <422400000>;
opp-peak-kBps = <800000 9600000>;
};
opp-537600000 {
opp-hz = /bits/ 64 <537600000>;
opp-peak-kBps = <800000 12902400>;
};
opp-652800000 {
opp-hz = /bits/ 64 <652800000>;
opp-peak-kBps = <800000 12902400>;
};
opp-768000000 {
opp-hz = /bits/ 64 <768000000>;
opp-peak-kBps = <800000 15974400>;
};
opp-883200000 {
opp-hz = /bits/ 64 <883200000>;
opp-peak-kBps = <1804000 19660800>;
};
opp-998400000 {
opp-hz = /bits/ 64 <998400000>;
opp-peak-kBps = <1804000 19660800>;
};
opp-1113600000 {
opp-hz = /bits/ 64 <1113600000>;
opp-peak-kBps = <1804000 22732800>;
};
opp-1228800000 {
opp-hz = /bits/ 64 <1228800000>;
opp-peak-kBps = <1804000 22732800>;
};
opp-1363200000 {
opp-hz = /bits/ 64 <1363200000>;
opp-peak-kBps = <2188000 25804800>;
};
opp-1478400000 {
opp-hz = /bits/ 64 <1478400000>;
opp-peak-kBps = <2188000 31948800>;
};
opp-1574400000 {
opp-hz = /bits/ 64 <1574400000>;
opp-peak-kBps = <3072000 31948800>;
};
opp-1670400000 {
opp-hz = /bits/ 64 <1670400000>;
opp-peak-kBps = <3072000 31948800>;
};
opp-1766400000 {
opp-hz = /bits/ 64 <1766400000>;
opp-peak-kBps = <3072000 31948800>;
};
};
cpu4_opp_table: opp-table-cpu4 {
compatible = "operating-points-v2";
opp-shared;
opp-825600000 {
opp-hz = /bits/ 64 <825600000>;
opp-peak-kBps = <1804000 15974400>;
};
opp-940800000 {
opp-hz = /bits/ 64 <940800000>;
opp-peak-kBps = <2188000 19660800>;
};
opp-1056000000 {
opp-hz = /bits/ 64 <1056000000>;
opp-peak-kBps = <2188000 22732800>;
};
opp-1171200000 {
opp-hz = /bits/ 64 <1171200000>;
opp-peak-kBps = <3072000 25804800>;
};
opp-1286400000 {
opp-hz = /bits/ 64 <1286400000>;
opp-peak-kBps = <3072000 31948800>;
};
opp-1420800000 {
opp-hz = /bits/ 64 <1420800000>;
opp-peak-kBps = <4068000 31948800>;
};
opp-1536000000 {
opp-hz = /bits/ 64 <1536000000>;
opp-peak-kBps = <4068000 31948800>;
};
opp-1651200000 {
opp-hz = /bits/ 64 <1651200000>;
opp-peak-kBps = <4068000 40550400>;
};
opp-1766400000 {
opp-hz = /bits/ 64 <1766400000>;
opp-peak-kBps = <4068000 40550400>;
};
opp-1881600000 {
opp-hz = /bits/ 64 <1881600000>;
opp-peak-kBps = <4068000 43008000>;
};
opp-1996800000 {
opp-hz = /bits/ 64 <1996800000>;
opp-peak-kBps = <6220000 43008000>;
};
opp-2131200000 {
opp-hz = /bits/ 64 <2131200000>;
opp-peak-kBps = <6220000 49152000>;
};
opp-2246400000 {
opp-hz = /bits/ 64 <2246400000>;
opp-peak-kBps = <7216000 49152000>;
};
opp-2361600000 {
opp-hz = /bits/ 64 <2361600000>;
opp-peak-kBps = <8368000 49152000>;
};
opp-2457600000 {
opp-hz = /bits/ 64 <2457600000>;
opp-peak-kBps = <8368000 51609600>;
};
opp-2553600000 {
opp-hz = /bits/ 64 <2553600000>;
opp-peak-kBps = <8368000 51609600>;
};
opp-2649600000 {
opp-hz = /bits/ 64 <2649600000>;
opp-peak-kBps = <8368000 51609600>;
};
opp-2745600000 {
opp-hz = /bits/ 64 <2745600000>;
opp-peak-kBps = <8368000 51609600>;
};
opp-2841600000 {
opp-hz = /bits/ 64 <2841600000>;
opp-peak-kBps = <8368000 51609600>;
};
opp-2918400000 {
opp-hz = /bits/ 64 <2918400000>;
opp-peak-kBps = <8368000 51609600>;
};
opp-2995200000 {
opp-hz = /bits/ 64 <2995200000>;
opp-peak-kBps = <8368000 51609600>;
};
};
firmware {
scm: scm {
compatible = "qcom,scm-sc8180x", "qcom,scm";
};
};
camnoc_virt: interconnect-camnoc-virt {
compatible = "qcom,sc8180x-camnoc-virt";
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
mc_virt: interconnect-mc-virt {
compatible = "qcom,sc8180x-mc-virt";
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
qup_virt: interconnect-qup-virt {
compatible = "qcom,sc8180x-qup-virt";
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
memory@80000000 {
device_type = "memory";
/* We expect the bootloader to fill in the size */
reg = <0x0 0x80000000 0x0 0x0>;
};
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
};
psci {
compatible = "arm,psci-1.0";
method = "smc";
cpu_pd0: power-domain-cpu0 {
#power-domain-cells = <0>;
power-domains = <&cluster_pd>;
domain-idle-states = <&little_cpu_sleep_0>;
};
cpu_pd1: power-domain-cpu1 {
#power-domain-cells = <0>;
power-domains = <&cluster_pd>;
domain-idle-states = <&little_cpu_sleep_0>;
};
cpu_pd2: power-domain-cpu2 {
#power-domain-cells = <0>;
power-domains = <&cluster_pd>;
domain-idle-states = <&little_cpu_sleep_0>;
};
cpu_pd3: power-domain-cpu3 {
#power-domain-cells = <0>;
power-domains = <&cluster_pd>;
domain-idle-states = <&little_cpu_sleep_0>;
};
cpu_pd4: power-domain-cpu4 {
#power-domain-cells = <0>;
power-domains = <&cluster_pd>;
domain-idle-states = <&big_cpu_sleep_0>;
};
cpu_pd5: power-domain-cpu5 {
#power-domain-cells = <0>;
power-domains = <&cluster_pd>;
domain-idle-states = <&big_cpu_sleep_0>;
};
cpu_pd6: power-domain-cpu6 {
#power-domain-cells = <0>;
power-domains = <&cluster_pd>;
domain-idle-states = <&big_cpu_sleep_0>;
};
cpu_pd7: power-domain-cpu7 {
#power-domain-cells = <0>;
power-domains = <&cluster_pd>;
domain-idle-states = <&big_cpu_sleep_0>;
};
cluster_pd: power-domain-cpu-cluster0 {
#power-domain-cells = <0>;
domain-idle-states = <&cluster_sleep_apss_off &cluster_sleep_aoss_sleep>;
};
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
hyp_mem: hyp@85700000 {
reg = <0x0 0x85700000 0x0 0x600000>;
no-map;
};
xbl_mem: xbl@85d00000 {
reg = <0x0 0x85d00000 0x0 0x140000>;
no-map;
};
aop_mem: aop@85f00000 {
reg = <0x0 0x85f00000 0x0 0x20000>;
no-map;
};
aop_cmd_db: cmd-db@85f20000 {
compatible = "qcom,cmd-db";
reg = <0x0 0x85f20000 0x0 0x20000>;
no-map;
};
reserved@85f40000 {
reg = <0x0 0x85f40000 0x0 0x10000>;
no-map;
};
smem_mem: smem@86000000 {
compatible = "qcom,smem";
reg = <0x0 0x86000000 0x0 0x200000>;
no-map;
hwlocks = <&tcsr_mutex 3>;
};
reserved@86200000 {
reg = <0x0 0x86200000 0x0 0x3900000>;
no-map;
};
reserved@89b00000 {
reg = <0x0 0x89b00000 0x0 0x1c00000>;
no-map;
};
reserved@9d400000 {
reg = <0x0 0x9d400000 0x0 0x1000000>;
no-map;
};
reserved@9e400000 {
reg = <0x0 0x9e400000 0x0 0x1400000>;
no-map;
};
reserved@9f800000 {
reg = <0x0 0x9f800000 0x0 0x800000>;
no-map;
};
};
smp2p-cdsp {
compatible = "qcom,smp2p";
qcom,smem = <94>, <432>;
interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>;
mboxes = <&apss_shared 6>;
qcom,local-pid = <0>;
qcom,remote-pid = <5>;
cdsp_smp2p_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,smem-state-cells = <1>;
};
cdsp_smp2p_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
#interrupt-cells = <2>;
};
};
smp2p-lpass {
compatible = "qcom,smp2p";
qcom,smem = <443>, <429>;
interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
mboxes = <&apss_shared 10>;
qcom,local-pid = <0>;
qcom,remote-pid = <2>;
adsp_smp2p_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,smem-state-cells = <1>;
};
adsp_smp2p_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
#interrupt-cells = <2>;
};
};
smp2p-mpss {
compatible = "qcom,smp2p";
qcom,smem = <435>, <428>;
interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
mboxes = <&apss_shared 14>;
qcom,local-pid = <0>;
qcom,remote-pid = <1>;
modem_smp2p_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,smem-state-cells = <1>;
};
modem_smp2p_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
#interrupt-cells = <2>;
};
modem_smp2p_ipa_out: ipa-ap-to-modem {
qcom,entry-name = "ipa";
#qcom,smem-state-cells = <1>;
};
modem_smp2p_ipa_in: ipa-modem-to-ap {
qcom,entry-name = "ipa";
interrupt-controller;
#interrupt-cells = <2>;
};
modem_smp2p_wlan_in: wlan-wpss-to-ap {
qcom,entry-name = "wlan";
interrupt-controller;
#interrupt-cells = <2>;
};
};
smp2p-slpi {
compatible = "qcom,smp2p";
qcom,smem = <481>, <430>;
interrupts = <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>;
mboxes = <&apss_shared 26>;
qcom,local-pid = <0>;
qcom,remote-pid = <3>;
slpi_smp2p_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,smem-state-cells = <1>;
};
slpi_smp2p_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
#interrupt-cells = <2>;
};
};
soc: soc@0 {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
ranges = <0 0 0 0 0x10 0>;
dma-ranges = <0 0 0 0 0x10 0>;
gcc: clock-controller@100000 {
compatible = "qcom,gcc-sc8180x";
reg = <0x0 0x00100000 0x0 0x1f0000>;
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&rpmhcc RPMH_CXO_CLK_A>,
<&sleep_clk>;
clock-names = "bi_tcxo",
"bi_tcxo_ao",
"sleep_clk";
power-domains = <&rpmhpd SC8180X_CX>;
};
qupv3_id_0: geniqup@8c0000 {
compatible = "qcom,geni-se-qup";
reg = <0 0x008c0000 0 0x6000>;
clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
clock-names = "m-ahb", "s-ahb";
#address-cells = <2>;
#size-cells = <2>;
ranges;
iommus = <&apps_smmu 0x4c3 0>;
status = "disabled";
i2c0: i2c@880000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00880000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi0: spi@880000 {
compatible = "qcom,geni-spi";
reg = <0 0x00880000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
uart0: serial@880000 {
compatible = "qcom,geni-uart";
reg = <0 0x00880000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c1: i2c@884000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00884000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi1: spi@884000 {
compatible = "qcom,geni-spi";
reg = <0 0x00884000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
uart1: serial@884000 {
compatible = "qcom,geni-uart";
reg = <0 0x00884000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c2: i2c@888000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00888000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi2: spi@888000 {
compatible = "qcom,geni-spi";
reg = <0 0x00888000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
uart2: serial@888000 {
compatible = "qcom,geni-uart";
reg = <0 0x00888000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c3: i2c@88c000 {
compatible = "qcom,geni-i2c";
reg = <0 0x0088c000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi3: spi@88c000 {
compatible = "qcom,geni-spi";
reg = <0 0x0088c000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
uart3: serial@88c000 {
compatible = "qcom,geni-uart";
reg = <0 0x0088c000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c4: i2c@890000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00890000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi4: spi@890000 {
compatible = "qcom,geni-spi";
reg = <0 0x00890000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
uart4: serial@890000 {
compatible = "qcom,geni-uart";
reg = <0 0x00890000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c5: i2c@894000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00894000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi5: spi@894000 {
compatible = "qcom,geni-spi";
reg = <0 0x00894000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
uart5: serial@894000 {
compatible = "qcom,geni-uart";
reg = <0 0x00894000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c6: i2c@898000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00898000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi6: spi@898000 {
compatible = "qcom,geni-spi";
reg = <0 0x00898000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
uart6: serial@898000 {
compatible = "qcom,geni-uart";
reg = <0 0x00898000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c7: i2c@89c000 {
compatible = "qcom,geni-i2c";
reg = <0 0x0089c000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi7: spi@89c000 {
compatible = "qcom,geni-spi";
reg = <0 0x0089c000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
uart7: serial@89c000 {
compatible = "qcom,geni-uart";
reg = <0 0x0089c000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
};
qupv3_id_1: geniqup@ac0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x00ac0000 0x0 0x6000>;
clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
<&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
clock-names = "m-ahb", "s-ahb";
#address-cells = <2>;
#size-cells = <2>;
ranges;
iommus = <&apps_smmu 0x603 0>;
status = "disabled";
i2c8: i2c@a80000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00a80000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi8: spi@a80000 {
compatible = "qcom,geni-spi";
reg = <0 0x00a80000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
uart8: serial@a80000 {
compatible = "qcom,geni-uart";
reg = <0 0x00a80000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c9: i2c@a84000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00a84000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi9: spi@a84000 {
compatible = "qcom,geni-spi";
reg = <0 0x00a84000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
uart9: serial@a84000 {
compatible = "qcom,geni-debug-uart";
reg = <0 0x00a84000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c10: i2c@a88000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00a88000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi10: spi@a88000 {
compatible = "qcom,geni-spi";
reg = <0 0x00a88000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
uart10: serial@a88000 {
compatible = "qcom,geni-uart";
reg = <0 0x00a88000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c11: i2c@a8c000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00a8c000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi11: spi@a8c000 {
compatible = "qcom,geni-spi";
reg = <0 0x00a8c000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
uart11: serial@a8c000 {
compatible = "qcom,geni-uart";
reg = <0 0x00a8c000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c12: i2c@a90000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00a90000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi12: spi@a90000 {
compatible = "qcom,geni-spi";
reg = <0 0x00a90000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
uart12: serial@a90000 {
compatible = "qcom,geni-uart";
reg = <0 0x00a90000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c16: i2c@a94000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00a94000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi16: spi@a94000 {
compatible = "qcom,geni-spi";
reg = <0 0x00a94000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
uart16: serial@a94000 {
compatible = "qcom,geni-uart";
reg = <0 0x00a94000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
};
qupv3_id_2: geniqup@cc0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x00cc0000 0x0 0x6000>;
clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
<&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
clock-names = "m-ahb", "s-ahb";
#address-cells = <2>;
#size-cells = <2>;
ranges;
iommus = <&apps_smmu 0x7a3 0>;
status = "disabled";
i2c17: i2c@c80000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00c80000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi17: spi@c80000 {
compatible = "qcom,geni-spi";
reg = <0 0x00c80000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
interconnect-names = "qup-core", "qup-config";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
uart17: serial@c80000 {
compatible = "qcom,geni-uart";
reg = <0 0x00c80000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c18: i2c@c84000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00c84000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi18: spi@c84000 {
compatible = "qcom,geni-spi";
reg = <0 0x00c84000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
interconnect-names = "qup-core", "qup-config";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
uart18: serial@c84000 {
compatible = "qcom,geni-uart";
reg = <0 0x00c84000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c19: i2c@c88000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00c88000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi19: spi@c88000 {
compatible = "qcom,geni-spi";
reg = <0 0x00c88000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
interconnect-names = "qup-core", "qup-config";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
uart19: serial@c88000 {
compatible = "qcom,geni-uart";
reg = <0 0x00c88000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c13: i2c@c8c000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00c8c000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi13: spi@c8c000 {
compatible = "qcom,geni-spi";
reg = <0 0x00c8c000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
interconnect-names = "qup-core", "qup-config";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
uart13: serial@c8c000 {
compatible = "qcom,geni-uart";
reg = <0 0x00c8c000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c14: i2c@c90000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00c90000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi14: spi@c90000 {
compatible = "qcom,geni-spi";
reg = <0 0x00c90000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
interconnect-names = "qup-core", "qup-config";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
uart14: serial@c90000 {
compatible = "qcom,geni-uart";
reg = <0 0x00c90000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c15: i2c@c94000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00c94000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
<&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "qup-core", "qup-config", "qup-memory";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi15: spi@c94000 {
compatible = "qcom,geni-spi";
reg = <0 0x00c94000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
interconnect-names = "qup-core", "qup-config";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
uart15: serial@c94000 {
compatible = "qcom,geni-uart";
reg = <0 0x00c94000 0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
};
config_noc: interconnect@1500000 {
compatible = "qcom,sc8180x-config-noc";
reg = <0 0x01500000 0 0x7400>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
system_noc: interconnect@1620000 {
compatible = "qcom,sc8180x-system-noc";
reg = <0 0x01620000 0 0x19400>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
aggre1_noc: interconnect@16e0000 {
compatible = "qcom,sc8180x-aggre1-noc";
reg = <0 0x016e0000 0 0xd080>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
aggre2_noc: interconnect@1700000 {
compatible = "qcom,sc8180x-aggre2-noc";
reg = <0 0x01700000 0 0x20000>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
compute_noc: interconnect@1720000 {
compatible = "qcom,sc8180x-compute-noc";
reg = <0 0x01720000 0 0x7000>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
mmss_noc: interconnect@1740000 {
compatible = "qcom,sc8180x-mmss-noc";
reg = <0 0x01740000 0 0x1c100>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
pcie0: pcie@1c00000 {
compatible = "qcom,pcie-sc8180x";
reg = <0 0x01c00000 0 0x3000>,
<0 0x60000000 0 0xf1d>,
<0 0x60000f20 0 0xa8>,
<0 0x60001000 0 0x1000>,
<0 0x60100000 0 0x100000>;
reg-names = "parf",
"dbi",
"elbi",
"atu",
"config";
device_type = "pci";
linux,pci-domain = <0>;
bus-range = <0x00 0xff>;
num-lanes = <2>;
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x01000000 0x0 0x60200000 0x0 0x60200000 0x0 0x100000>,
<0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi0",
"msi1",
"msi2",
"msi3",
"msi4",
"msi5",
"msi6",
"msi7",
"global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
<0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
<0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
<0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
<&gcc GCC_PCIE_0_AUX_CLK>,
<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
<&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
<&gcc GCC_PCIE_0_SLV_AXI_CLK>,
<&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>;
clock-names = "pipe",
"aux",
"cfg",
"bus_master",
"bus_slave",
"slave_q2a";
assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>;
assigned-clock-rates = <19200000>;
iommu-map = <0x0 &apps_smmu 0x1d80 0x1>,
<0x100 &apps_smmu 0x1d81 0x1>;
resets = <&gcc GCC_PCIE_0_BCR>;
reset-names = "pci";
power-domains = <&gcc PCIE_0_GDSC>;
interconnects = <&aggre2_noc MASTER_PCIE 0 &mc_virt SLAVE_EBI_CH0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
interconnect-names = "pcie-mem", "cpu-pcie";
phys = <&pcie0_phy>;
phy-names = "pciephy";
dma-coherent;
status = "disabled";
pcie@0 {
device_type = "pci";
reg = <0x0 0x0 0x0 0x0 0x0>;
bus-range = <0x01 0xff>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
};
};
pcie0_phy: phy@1c06000 {
compatible = "qcom,sc8180x-qmp-pcie-phy";
reg = <0 0x01c06000 0 0x1000>;
clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
<&gcc GCC_PCIE_0_CLKREF_CLK>,
<&gcc GCC_PCIE0_PHY_REFGEN_CLK>,
<&gcc GCC_PCIE_0_PIPE_CLK>;
clock-names = "aux",
"cfg_ahb",
"ref",
"refgen",
"pipe";
#clock-cells = <0>;
clock-output-names = "pcie_0_pipe_clk";
#phy-cells = <0>;
resets = <&gcc GCC_PCIE_0_PHY_BCR>;
reset-names = "phy";
assigned-clocks = <&gcc GCC_PCIE0_PHY_REFGEN_CLK>;
assigned-clock-rates = <100000000>;
status = "disabled";
};
pcie3: pcie@1c08000 {
compatible = "qcom,pcie-sc8180x";
reg = <0 0x01c08000 0 0x3000>,
<0 0x40000000 0 0xf1d>,
<0 0x40000f20 0 0xa8>,
<0 0x40001000 0 0x1000>,
<0 0x40100000 0 0x100000>;
reg-names = "parf",
"dbi",
"elbi",
"atu",
"config";
device_type = "pci";
linux,pci-domain = <3>;
bus-range = <0x00 0xff>;
num-lanes = <2>;
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>,
<0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi0",
"msi1",
"msi2",
"msi3",
"msi4",
"msi5",
"msi6",
"msi7",
"global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
<0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
<0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
<0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_PCIE_3_PIPE_CLK>,
<&gcc GCC_PCIE_3_AUX_CLK>,
<&gcc GCC_PCIE_3_CFG_AHB_CLK>,
<&gcc GCC_PCIE_3_MSTR_AXI_CLK>,
<&gcc GCC_PCIE_3_SLV_AXI_CLK>,
<&gcc GCC_PCIE_3_SLV_Q2A_AXI_CLK>;
clock-names = "pipe",
"aux",
"cfg",
"bus_master",
"bus_slave",
"slave_q2a";
assigned-clocks = <&gcc GCC_PCIE_3_AUX_CLK>;
assigned-clock-rates = <19200000>;
iommu-map = <0x0 &apps_smmu 0x1e00 0x1>,
<0x100 &apps_smmu 0x1e01 0x1>;
resets = <&gcc GCC_PCIE_3_BCR>;
reset-names = "pci";
power-domains = <&gcc PCIE_3_GDSC>;
interconnects = <&aggre2_noc MASTER_PCIE_3 0 &mc_virt SLAVE_EBI_CH0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_3 0>;
interconnect-names = "pcie-mem", "cpu-pcie";
phys = <&pcie3_phy>;
phy-names = "pciephy";
dma-coherent;
status = "disabled";
pcie@0 {
device_type = "pci";
reg = <0x0 0x0 0x0 0x0 0x0>;
bus-range = <0x01 0xff>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
};
};
pcie3_phy: phy@1c0c000 {
compatible = "qcom,sc8180x-qmp-pcie-phy";
reg = <0 0x01c0c000 0 0x1000>;
clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
<&gcc GCC_PCIE_3_CFG_AHB_CLK>,
<&gcc GCC_PCIE_3_CLKREF_CLK>,
<&gcc GCC_PCIE3_PHY_REFGEN_CLK>,
<&gcc GCC_PCIE_3_PIPE_CLK>;
clock-names = "aux",
"cfg_ahb",
"ref",
"refgen",
"pipe";
#clock-cells = <0>;
clock-output-names = "pcie_3_pipe_clk";
#phy-cells = <0>;
resets = <&gcc GCC_PCIE_3_PHY_BCR>;
reset-names = "phy";
assigned-clocks = <&gcc GCC_PCIE3_PHY_REFGEN_CLK>;
assigned-clock-rates = <100000000>;
status = "disabled";
};
pcie1: pcie@1c10000 {
compatible = "qcom,pcie-sc8180x";
reg = <0 0x01c10000 0 0x3000>,
<0 0x68000000 0 0xf1d>,
<0 0x68000f20 0 0xa8>,
<0 0x68001000 0 0x1000>,
<0 0x68100000 0 0x100000>;
reg-names = "parf",
"dbi",
"elbi",
"atu",
"config";
device_type = "pci";
linux,pci-domain = <1>;
bus-range = <0x00 0xff>;
num-lanes = <2>;
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x01000000 0x0 0x68200000 0x0 0x68200000 0x0 0x100000>,
<0x02000000 0x0 0x68300000 0x0 0x68300000 0x0 0x3d00000>;
interrupts = <GIC_SPI 756 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 755 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 754 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 753 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 752 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 751 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 750 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 749 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 758 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi0",
"msi1",
"msi2",
"msi3",
"msi4",
"msi5",
"msi6",
"msi7",
"global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 747 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
<0 0 0 2 &intc 0 746 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
<0 0 0 3 &intc 0 745 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
<0 0 0 4 &intc 0 744 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
<&gcc GCC_PCIE_1_AUX_CLK>,
<&gcc GCC_PCIE_1_CFG_AHB_CLK>,
<&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
<&gcc GCC_PCIE_1_SLV_AXI_CLK>,
<&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>;
clock-names = "pipe",
"aux",
"cfg",
"bus_master",
"bus_slave",
"slave_q2a";
assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
assigned-clock-rates = <19200000>;
iommu-map = <0x0 &apps_smmu 0x1c80 0x1>,
<0x100 &apps_smmu 0x1c81 0x1>;
resets = <&gcc GCC_PCIE_1_BCR>;
reset-names = "pci";
power-domains = <&gcc PCIE_1_GDSC>;
interconnects = <&aggre2_noc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI_CH0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_1 0>;
interconnect-names = "pcie-mem", "cpu-pcie";
phys = <&pcie1_phy>;
phy-names = "pciephy";
dma-coherent;
status = "disabled";
pcie@0 {
device_type = "pci";
reg = <0x0 0x0 0x0 0x0 0x0>;
bus-range = <0x01 0xff>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
};
};
pcie1_phy: phy@1c16000 {
compatible = "qcom,sc8180x-qmp-pcie-phy";
reg = <0 0x01c16000 0 0x1000>;
clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
<&gcc GCC_PCIE_1_CFG_AHB_CLK>,
<&gcc GCC_PCIE_1_CLKREF_CLK>,
<&gcc GCC_PCIE1_PHY_REFGEN_CLK>,
<&gcc GCC_PCIE_1_PIPE_CLK>;
clock-names = "aux",
"cfg_ahb",
"ref",
"refgen",
"pipe";
#clock-cells = <0>;
clock-output-names = "pcie_1_pipe_clk";
#phy-cells = <0>;
resets = <&gcc GCC_PCIE_1_PHY_BCR>;
reset-names = "phy";
assigned-clocks = <&gcc GCC_PCIE1_PHY_REFGEN_CLK>;
assigned-clock-rates = <100000000>;
status = "disabled";
};
pcie2: pcie@1c18000 {
compatible = "qcom,pcie-sc8180x";
reg = <0 0x01c18000 0 0x3000>,
<0 0x70000000 0 0xf1d>,
<0 0x70000f20 0 0xa8>,
<0 0x70001000 0 0x1000>,
<0 0x70100000 0 0x100000>;
reg-names = "parf",
"dbi",
"elbi",
"atu",
"config";
device_type = "pci";
linux,pci-domain = <2>;
bus-range = <0x00 0xff>;
num-lanes = <4>;
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x01000000 0x0 0x70200000 0x0 0x70200000 0x0 0x100000>,
<0x02000000 0x0 0x70300000 0x0 0x70300000 0x0 0x3d00000>;
interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 671 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 670 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 667 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 744 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi0",
"msi1",
"msi2",
"msi3",
"msi4",
"msi5",
"msi6",
"msi7",
"global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 663 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
<0 0 0 2 &intc 0 662 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
<0 0 0 3 &intc 0 661 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
<0 0 0 4 &intc 0 660 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_PCIE_2_PIPE_CLK>,
<&gcc GCC_PCIE_2_AUX_CLK>,
<&gcc GCC_PCIE_2_CFG_AHB_CLK>,
<&gcc GCC_PCIE_2_MSTR_AXI_CLK>,
<&gcc GCC_PCIE_2_SLV_AXI_CLK>,
<&gcc GCC_PCIE_2_SLV_Q2A_AXI_CLK>;
clock-names = "pipe",
"aux",
"cfg",
"bus_master",
"bus_slave",
"slave_q2a";
assigned-clocks = <&gcc GCC_PCIE_2_AUX_CLK>;
assigned-clock-rates = <19200000>;
iommu-map = <0x0 &apps_smmu 0x1d00 0x1>,
<0x100 &apps_smmu 0x1d01 0x1>;
resets = <&gcc GCC_PCIE_2_BCR>;
reset-names = "pci";
power-domains = <&gcc PCIE_2_GDSC>;
interconnects = <&aggre2_noc MASTER_PCIE_2 0 &mc_virt SLAVE_EBI_CH0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_2 0>;
interconnect-names = "pcie-mem", "cpu-pcie";
phys = <&pcie2_phy>;
phy-names = "pciephy";
dma-coherent;
status = "disabled";
pcie@0 {
device_type = "pci";
reg = <0x0 0x0 0x0 0x0 0x0>;
bus-range = <0x01 0xff>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
};
};
pcie2_phy: phy@1c1c000 {
compatible = "qcom,sc8180x-qmp-pcie-phy";
reg = <0 0x01c1c000 0 0x1000>;
clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
<&gcc GCC_PCIE_2_CFG_AHB_CLK>,
<&gcc GCC_PCIE_2_CLKREF_CLK>,
<&gcc GCC_PCIE2_PHY_REFGEN_CLK>,
<&gcc GCC_PCIE_2_PIPE_CLK>;
clock-names = "aux",
"cfg_ahb",
"ref",
"refgen",
"pipe";
#clock-cells = <0>;
clock-output-names = "pcie_2_pipe_clk";
#phy-cells = <0>;
resets = <&gcc GCC_PCIE_2_PHY_BCR>;
reset-names = "phy";
assigned-clocks = <&gcc GCC_PCIE2_PHY_REFGEN_CLK>;
assigned-clock-rates = <100000000>;
status = "disabled";
};
ufs_mem_hc: ufshc@1d84000 {
compatible = "qcom,sc8180x-ufshc", "qcom,ufshc",
"jedec,ufs-2.0";
reg = <0 0x01d84000 0 0x2500>;
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
phys = <&ufs_mem_phy>;
phy-names = "ufsphy";
lanes-per-direction = <2>;
#reset-cells = <1>;
resets = <&gcc GCC_UFS_PHY_BCR>;
reset-names = "rst";
iommus = <&apps_smmu 0x300 0>;
clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
<&gcc GCC_UFS_PHY_AHB_CLK>,
<&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
<&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
clock-names = "core_clk",
"bus_aggr_clk",
"iface_clk",
"core_clk_unipro",
"ref_clk",
"tx_lane0_sync_clk",
"rx_lane0_sync_clk",
"rx_lane1_sync_clk";
freq-table-hz = <37500000 300000000>,
<0 0>,
<0 0>,
<37500000 300000000>,
<0 0>,
<0 0>,
<0 0>,
<0 0>;
power-domains = <&gcc UFS_PHY_GDSC>;
interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
&mc_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>,
<&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ALWAYS
&config_noc SLAVE_UFS_MEM_0_CFG QCOM_ICC_TAG_ALWAYS>;
interconnect-names = "ufs-ddr", "cpu-ufs";
status = "disabled";
};
ufs_mem_phy: phy-wrapper@1d87000 {
compatible = "qcom,sc8180x-qmp-ufs-phy";
reg = <0 0x01d87000 0 0x1000>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
<&gcc GCC_UFS_MEM_CLKREF_EN>;
clock-names = "ref",
"ref_aux",
"qref";
resets = <&ufs_mem_hc 0>;
reset-names = "ufsphy";
power-domains = <&gcc UFS_PHY_GDSC>;
#phy-cells = <0>;
status = "disabled";
};
tcsr_mutex: hwlock@1f40000 {
compatible = "qcom,tcsr-mutex";
reg = <0x0 0x01f40000 0x0 0x40000>;
#hwlock-cells = <1>;
};
gpu: gpu@2c00000 {
compatible = "qcom,adreno-680.1", "qcom,adreno";
reg = <0 0x02c00000 0 0x40000>;
reg-names = "kgsl_3d0_reg_memory";
interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&adreno_smmu 0 0xc01>;
operating-points-v2 = <&gpu_opp_table>;
interconnects = <&gem_noc MASTER_GRAPHICS_3D 0 &mc_virt SLAVE_EBI_CH0 0>;
interconnect-names = "gfx-mem";
qcom,gmu = <&gmu>;
#cooling-cells = <2>;
status = "disabled";
gpu_opp_table: opp-table {
compatible = "operating-points-v2";
opp-514000000 {
opp-hz = /bits/ 64 <514000000>;
opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
};
opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
};
opp-461000000 {
opp-hz = /bits/ 64 <461000000>;
opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
};
opp-405000000 {
opp-hz = /bits/ 64 <405000000>;
opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
};
opp-315000000 {
opp-hz = /bits/ 64 <315000000>;
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
};
opp-256000000 {
opp-hz = /bits/ 64 <256000000>;
--> --------------------
--> maximum size reached
--> --------------------
[ Dauer der Verarbeitung: 0.60 Sekunden
]
|
2026-04-06
|
|
|
|
|
