Quelle  sdm845-shift-axolotl.dts   Sprache: unbekannt

// SPDX-License-Identifier: GPL-2.0
/*
 * Copyright (c) 2022, Alexander Martinz <amartinz@shiftphones.com>
 * Copyright (c) 2022, Casey Connolly <casey.connolly@linaro.org>
 * Copyright (c) 2022, Dylan Van Assche <me@dylanvanassche.be>
 */

/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "sdm845.dtsi"
#include "pm8998.dtsi"
#include "pmi8998.dtsi"

/ {
 model = "SHIFT SHIFT6mq";
 compatible = "shift,axolotl", "qcom,sdm845";
 qcom,msm-id = <321 0x20001>;
 qcom,board-id = <11 0>;

 aliases {
  display0 = &framebuffer0;
  serial0 = &uart9;
  serial1 = &uart6;
 };

 chosen {
  #address-cells = <2>;
  #size-cells = <2>;
  ranges;

  stdout-path = "serial0";

  /* Use framebuffer setup by the bootloader. */
  framebuffer0: framebuffer@9d400000 {
   compatible = "simple-framebuffer";
   reg = <0x0 0x9d400000 0x0 (1080 * 2160 * 4)>;
   width = <1080>;
   height = <2160>;
   stride = <(1080 * 4)>;
   format = "a8r8g8b8";
  };
 };

 gpio-keys {
  compatible = "gpio-keys";
  autorepeat;

  pinctrl-names = "default";
  pinctrl-0 = <&volume_up_gpio>;

  key-vol-up {
   label = "volume_up";
   linux,code = <KEY_VOLUMEUP>;
   gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
   debounce-interval = <15>;
  };
 };

 reserved-memory {
  framebuffer@9d400000 {
   reg = <0x0 0x9d400000 0x0 (1080 * 2160 * 4)>;
   no-map;
  };

  ramoops: ramoops@b0000000 {
   compatible = "ramoops";
   reg = <0 0xb0000000 0 0x00400000>;
   record-size = <0x40000>;
   console-size = <0x40000>;
   ftrace-size = <0x40000>;
   pmsg-size = <0x200000>;
   ecc-size = <0x0>;
  };
 };

 battery: battery {
  compatible = "simple-battery";

  charge-full-design-microamp-hours = <3850000>;
  voltage-min-design-microvolt = <3600000>;
  voltage-max-design-microvolt = <4400000>;
 };

 vph_pwr: vph-pwr-regulator {
  compatible = "regulator-fixed";
  regulator-name = "vph_pwr";
  regulator-min-microvolt = <3700000>;
  regulator-max-microvolt = <3700000>;
 };

 vreg_s4a_1p8: pm8998-smps4 {
  compatible = "regulator-fixed";
  regulator-name = "vreg_s4a_1p8";

  regulator-min-microvolt = <1800000>;
  regulator-max-microvolt = <1800000>;

  regulator-always-on;
  regulator-boot-on;

  vin-supply = <&vph_pwr>;
 };
};

&adsp_pas {
 status = "okay";
 firmware-name = "qcom/sdm845/axolotl/adsp.mbn";
};

&apps_rsc {
 regulators-0 {
  compatible = "qcom,pm8998-rpmh-regulators";
  qcom,pmic-id = "a";

  vdd-s1-supply = <&vph_pwr>;
  vdd-s2-supply = <&vph_pwr>;
  vdd-s3-supply = <&vph_pwr>;
  vdd-s4-supply = <&vph_pwr>;
  vdd-s5-supply = <&vph_pwr>;
  vdd-s6-supply = <&vph_pwr>;
  vdd-s7-supply = <&vph_pwr>;
  vdd-s8-supply = <&vph_pwr>;
  vdd-s9-supply = <&vph_pwr>;
  vdd-s10-supply = <&vph_pwr>;
  vdd-s11-supply = <&vph_pwr>;
  vdd-s12-supply = <&vph_pwr>;
  vdd-s13-supply = <&vph_pwr>;
  vdd-l1-l27-supply = <&vreg_s7a_1p025>;
  vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
  vdd-l3-l11-supply = <&vreg_s7a_1p025>;
  vdd-l4-l5-supply = <&vreg_s7a_1p025>;
  vdd-l6-supply = <&vph_pwr>;
  vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
  vdd-l9-supply = <&vreg_bob>;
  vdd-l10-l23-l25-supply = <&vreg_bob>;
  vdd-l13-l19-l21-supply = <&vreg_bob>;
  vdd-l16-l28-supply = <&vreg_bob>;
  vdd-l18-l22-supply = <&vreg_bob>;
  vdd-l20-l24-supply = <&vreg_bob>;
  vdd-l26-supply = <&vreg_s3a_1p35>;
  vin-lvs-1-2-supply = <&vreg_s4a_1p8>;

  vreg_s2a_1p125: smps2 {
   regulator-min-microvolt = <1100000>;
   regulator-max-microvolt = <1100000>;
  };

  vreg_s3a_1p35: smps3 {
   regulator-min-microvolt = <1352000>;
   regulator-max-microvolt = <1352000>;
  };

  vreg_s5a_2p04: smps5 {
   regulator-min-microvolt = <1904000>;
   regulator-max-microvolt = <2040000>;
  };

  vreg_s7a_1p025: smps7 {
   regulator-min-microvolt = <900000>;
   regulator-max-microvolt = <1028000>;
  };

  vdd_qusb_hs0:
  vdda_hp_pcie_core:
  vdda_mipi_csi0_0p9:
  vdda_mipi_csi1_0p9:
  vdda_mipi_csi2_0p9:
  vdda_mipi_dsi0_pll:
  vdda_mipi_dsi1_pll:
  vdda_qlink_lv:
  vdda_qlink_lv_ck:
  vdda_qrefs_0p875:
  vdda_pcie_core:
  vdda_pll_cc_ebi01:
  vdda_pll_cc_ebi23:
  vdda_sp_sensor:
  vdda_ufs1_core:
  vdda_ufs2_core:
  vdda_usb1_ss_core:
  vdda_usb2_ss_core:
  vreg_l1a_0p875: ldo1 {
   regulator-min-microvolt = <880000>;
   regulator-max-microvolt = <880000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vddpx_10:
  vreg_l2a_1p2: ldo2 {
   regulator-min-microvolt = <1200000>;
   regulator-max-microvolt = <1200000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-always-on;
  };

  vreg_l3a_1p0: ldo3 {
   regulator-min-microvolt = <1000000>;
   regulator-max-microvolt = <1000000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vdd_wcss_cx:
  vdd_wcss_mx:
  vdda_wcss_pll:
  vreg_l5a_0p8: ldo5 {
   regulator-min-microvolt = <800000>;
   regulator-max-microvolt = <800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vddpx_13:
  vreg_l6a_1p8: ldo6 {
   regulator-min-microvolt = <1856000>;
   regulator-max-microvolt = <1856000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l7a_1p8: ldo7 {
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l8a_1p2: ldo8 {
   regulator-min-microvolt = <1200000>;
   regulator-max-microvolt = <1248000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l9a_1p8: ldo9 {
   regulator-min-microvolt = <1704000>;
   regulator-max-microvolt = <2928000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l10a_1p8: ldo10 {
   regulator-min-microvolt = <1704000>;
   regulator-max-microvolt = <2928000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l11a_1p0: ldo11 {
   regulator-min-microvolt = <1000000>;
   regulator-max-microvolt = <1048000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vdd_qfprom:
  vdd_qfprom_sp:
  vdda_apc1_cs_1p8:
  vdda_gfx_cs_1p8:
  vdda_qrefs_1p8:
  vdda_qusb_hs0_1p8:
  vddpx_11:
  vreg_l12a_1p8: ldo12 {
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vddpx_2:
  vreg_l13a_2p95: ldo13 {
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <2960000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l14a_1p88: ldo14 {
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l15a_1p8: ldo15 {
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l16a_2p7: ldo16 {
   regulator-min-microvolt = <2704000>;
   regulator-max-microvolt = <2704000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l17a_1p3: ldo17 {
   regulator-min-microvolt = <1304000>;
   regulator-max-microvolt = <1304000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l18a_2p7: ldo18 {
   regulator-min-microvolt = <2704000>;
   regulator-max-microvolt = <2960000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l19a_3p0: ldo19 {
   regulator-min-microvolt = <2856000>;
   regulator-max-microvolt = <3104000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l20a_2p95: ldo20 {
   regulator-min-microvolt = <2704000>;
   regulator-max-microvolt = <2960000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l21a_2p95: ldo21 {
   regulator-min-microvolt = <2704000>;
   regulator-max-microvolt = <2960000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l22a_2p85: ldo22 {
   regulator-min-microvolt = <2864000>;
   regulator-max-microvolt = <3312000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l23a_3p3: ldo23 {
   regulator-min-microvolt = <3000000>;
   regulator-max-microvolt = <3312000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vdda_qusb_hs0_3p1:
  vreg_l24a_3p075: ldo24 {
   regulator-min-microvolt = <3088000>;
   regulator-max-microvolt = <3088000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l25a_3p3: ldo25 {
   regulator-min-microvolt = <3300000>;
   regulator-max-microvolt = <3312000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vdda_hp_pcie_1p2:
  vdda_hv_ebi0:
  vdda_hv_ebi1:
  vdda_hv_ebi2:
  vdda_hv_ebi3:
  vdda_mipi_csi_1p25:
  vdda_mipi_dsi0_1p2:
  vdda_mipi_dsi1_1p2:
  vdda_pcie_1p2:
  vdda_ufs1_1p2:
  vdda_ufs2_1p2:
  vdda_usb1_ss_1p2:
  vdda_usb2_ss_1p2:
  vreg_l26a_1p2: ldo26 {
   regulator-min-microvolt = <1200000>;
   regulator-max-microvolt = <1200000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l28a_3p0: ldo28 {
   regulator-min-microvolt = <2856000>;
   regulator-max-microvolt = <3008000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_lvs1a_1p8: lvs1 {
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
  };

  vreg_lvs2a_1p8: lvs2 {
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
  };
 };

 regulators-1 {
  compatible = "qcom,pmi8998-rpmh-regulators";
  qcom,pmic-id = "b";

  vdd-bob-supply = <&vph_pwr>;

  vreg_bob: bob {
   regulator-min-microvolt = <3312000>;
   regulator-max-microvolt = <3600000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
   regulator-allow-bypass;
  };
 };

 regulators-2 {
  compatible = "qcom,pm8005-rpmh-regulators";
  qcom,pmic-id = "c";

  vdd-s1-supply = <&vph_pwr>;
  vdd-s2-supply = <&vph_pwr>;
  vdd-s3-supply = <&vph_pwr>;
  vdd-s4-supply = <&vph_pwr>;

  vreg_s3c_0p6: smps3 {
   regulator-min-microvolt = <600000>;
   regulator-max-microvolt = <600000>;
  };
 };
};

&cdsp_pas {
 status = "okay";
 firmware-name = "qcom/sdm845/axolotl/cdsp.mbn";
};

&gcc {
 protected-clocks = <GCC_QSPI_CORE_CLK>,
      <GCC_QSPI_CORE_CLK_SRC>,
      <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
      <GCC_LPASS_Q6_AXI_CLK>,
      <GCC_LPASS_SWAY_CLK>;
};

&gpu {
 status = "okay";

 zap-shader {
  memory-region = <&gpu_mem>;
  firmware-name = "qcom/sdm845/axolotl/a630_zap.mbn";
 };
};

&i2c5 {
 status = "okay";

 touchscreen@38 {
  compatible = "focaltech,fts8719";
  reg = <0x38>;
  wakeup-source;
  interrupt-parent = <&tlmm>;
  interrupts = <125 IRQ_TYPE_EDGE_FALLING>;
  vdd-supply = <&vreg_l28a_3p0>;
  vcc-i2c-supply = <&vreg_l14a_1p88>;

  pinctrl-names = "default", "suspend";
  pinctrl-0 = <&ts_int_active &ts_reset_active>;
  pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;

  reset-gpio = <&tlmm 99 GPIO_ACTIVE_HIGH>;
  irq-gpio = <&tlmm 125 GPIO_TRANSITORY>;
  touchscreen-size-x = <1080>;
  touchscreen-size-y = <2160>;
 };
};

&i2c10 {
 /* SMB1355@0x0C */
};

&ipa {
 qcom,gsi-loader = "self";
 memory-region = <&ipa_fw_mem>;
 firmware-name = "qcom/sdm845/axolotl/ipa_fws.mbn";
 status = "okay";
};

&mdss {
 status = "okay";
};

&mdss_dsi0 {
 status = "okay";
 vdda-supply = <&vdda_mipi_dsi0_1p2>;

 panel@0 {
  compatible = "visionox,rm69299-shift";
  status = "okay";
  reg = <0>;
  vdda-supply = <&vreg_l14a_1p88>;
  vdd3p3-supply = <&vreg_l28a_3p0>;

  #address-cells = <1>;
  #size-cells = <0>;

  reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;

  pinctrl-names = "default", "sleep";
  pinctrl-0 = <&sde_dsi_active &sde_te_active>;
  pinctrl-1 = <&sde_dsi_suspend &sde_te_suspend>;

  port {
   panel_in_0: endpoint {
    remote-endpoint = <&mdss_dsi0_out>;
   };
  };
 };
};

&mdss_dsi0_out {
 remote-endpoint = <&panel_in_0>;
 data-lanes = <0 1 2 3>;
};

&mdss_dsi0_phy {
 status = "okay";
 vdds-supply = <&vdda_mipi_dsi0_pll>;
};

&mss_pil {
 status = "okay";
 firmware-name = "qcom/sdm845/axolotl/mba.mbn", "qcom/sdm845/axolotl/modem.mbn";
};

&pm8998_gpios {
 volume_up_gpio: pm8998-gpio6-state {
  pinconf {
   pins = "gpio6";
   function = "normal";
   input-enable;
   bias-pull-up;
   qcom,drive-strength = <0>;
  };
 };
};

&pmi8998_charger {
 monitored-battery = <&battery>;

 status = "okay";
};

&pm8998_resin {
 linux,code = <KEY_VOLUMEDOWN>;
 status = "okay";
};

&pmi8998_lpg {
 status = "okay";

 multi-led {
  color = <LED_COLOR_ID_RGB>;
  function = LED_FUNCTION_STATUS;

  #address-cells = <1>;
  #size-cells = <0>;

  led@3 {
   reg = <3>;
   color = <LED_COLOR_ID_BLUE>;
  };

  led@4 {
   reg = <4>;
   color = <LED_COLOR_ID_GREEN>;
  };

  led@5 {
   reg = <5>;
   color = <LED_COLOR_ID_RED>;
  };
 };
};

&pmi8998_flash {
 status = "okay";

 led-0 {
  function = LED_FUNCTION_FLASH;
  color = <LED_COLOR_ID_WHITE>;
  led-sources = <1>;
  led-max-microamp = <100000>;
  flash-max-microamp = <1100000>;
  flash-max-timeout-us = <1280000>;
 };

 led-1 {
  function = LED_FUNCTION_FLASH;
  color = <LED_COLOR_ID_YELLOW>;
  led-sources = <2>;
  led-max-microamp = <100000>;
  flash-max-microamp = <1100000>;
  flash-max-timeout-us = <1280000>;
 };
};

&qup_uart9_rx {
 drive-strength = <2>;
 bias-pull-up;
};

&qup_uart9_tx {
 drive-strength = <2>;
 bias-disable;
};

&qupv3_id_0 {
 status = "okay";
};

&qupv3_id_1 {
 status = "okay";
};

&slpi_pas {
 firmware-name = "qcom/sdm845/axolotl/slpi.mbn";
 status = "okay";
};

&tlmm {
 gpio-reserved-ranges = <0 4>, <81 4>;

 sde_dsi_active: sde-dsi-active-state {
  pins = "gpio6", "gpio11";
  function = "gpio";
  drive-strength = <8>;
  bias-disable;
 };

 sde_dsi_suspend: sde-dsi-suspend-state {
  pins = "gpio6", "gpio11";
  function = "gpio";
  drive-strength = <2>;
  bias-pull-down;
 };

 sde_te_active: sde-te-active-state {
  pins = "gpio10";
  function = "mdp_vsync";
  drive-strength = <2>;
  bias-pull-down;
 };

 sde_te_suspend: sde-te-suspend-state {
  pins = "gpio10";
  function = "mdp_vsync";
  drive-strength = <2>;
  bias-pull-down;
 };

 ts_int_active: ts-int-active-state {
  pins = "gpio125";
  function = "gpio";
  drive-strength = <8>;
  bias-pull-up;
 };

 ts_int_suspend: ts-int-suspend-state {
  pins = "gpio125";
  function = "gpio";
  drive-strength = <2>;
  bias-pull-down;
 };

 ts_reset_active: ts-reset-active-state {
  pins = "gpio99";
  function = "gpio";
  drive-strength = <8>;
  bias-pull-up;
 };

 ts_reset_suspend: ts-reset-suspend-state {
  pins = "gpio99";
  function = "gpio";
  drive-strength = <2>;
  bias-pull-down;
 };
};

&uart6 {
 status = "okay";

 pinctrl-0 = <&qup_uart6_4pin>;

 bluetooth {
  compatible = "qcom,wcn3990-bt";

  /*
   * This path is relative to the qca/
   * subdir under lib/firmware.
   */
  firmware-name = "axolotl/crnv21.bin";

  vddio-supply = <&vreg_s4a_1p8>;
  vddxo-supply = <&vreg_l7a_1p8>;
  vddrf-supply = <&vreg_l17a_1p3>;
  vddch0-supply = <&vreg_l25a_3p3>;
  max-speed = <3200000>;
 };
};

&uart9 {
 status = "okay";
};

&ufs_mem_hc {
 status = "okay";

 reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;

 vcc-supply = <&vreg_l20a_2p95>;
 vcc-max-microamp = <600000>;
};

&ufs_mem_phy {
 status = "okay";

 vdda-phy-supply = <&vdda_ufs1_core>;
 vdda-pll-supply = <&vdda_ufs1_1p2>;
};

&usb_1 {
 status = "okay";
};

&usb_1_dwc3 {
 dr_mode = "peripheral";
};

&usb_1_hsphy {
 status = "okay";

 vdd-supply = <&vreg_l1a_0p875>;
 vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
 vdda-pll-supply = <&vreg_l12a_1p8>;
};

&usb_1_qmpphy {
 status = "okay";

 vdda-phy-supply = <&vreg_l26a_1p2>;
 vdda-pll-supply = <&vreg_l1a_0p875>;
};

&venus {
 status = "okay";
 firmware-name = "qcom/sdm845/axolotl/venus.mbn";
};

&wifi {
 status = "okay";

 vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
 vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
 vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
 vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
 vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;

 qcom,snoc-host-cap-8bit-quirk;
};