Quelle  sm7125-xiaomi-common.dtsi   Sprache: unbekannt

// SPDX-License-Identifier: GPL-2.0
/*
 * Copyright (c) 2021, The Linux Foundation. All rights reserved.
 */

/dts-v1/;

#include <dt-bindings/arm/qcom,ids.h>
#include <dt-bindings/firmware/qcom,scm.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "sm7125.dtsi"
#include "pm6150.dtsi"
#include "pm6150l.dtsi"

/delete-node/ &ipa_fw_mem;
/delete-node/ &rmtfs_mem;

/ {
 chassis-type = "handset";

 qcom,msm-id = <QCOM_ID_SM7125 0>;

 chosen {
  #address-cells = <2>;
  #size-cells = <2>;
  ranges;

  framebuffer@9c000000 {
   compatible = "simple-framebuffer";
   reg = <0x0 0x9c000000 0x0 (1080 * 2400 * 4)>;
   width = <1080>;
   height = <2400>;
   stride = <(1080 * 4)>;
   format = "a8r8g8b8";
   clocks = <&gcc GCC_DISP_HF_AXI_CLK>;
  };
 };

 gpio_keys: gpio-keys {
  compatible = "gpio-keys";

  key-vol-up {
   label = "Volume Up";
   linux,code = <KEY_VOLUMEUP>;
   gpios = <&pm6150l_gpios 2 GPIO_ACTIVE_LOW>;
   debounce-interval = <15>;
   linux,can-disable;
   wakeup-source;
  };
 };

 reserved-memory {
  mpss_mem: memory@86000000 {
   reg = <0x0 0x86000000 0x0 0x8400000>;
   no-map;
  };

  venus_mem: memory@8ee00000 {
   reg = <0x0 0x8ee00000 0x0 0x500000>;
   no-map;
  };

  cdsp_mem: memory@8f300000 {
   reg = <0x0 0x8f300000 0x0 0x1e00000>;
   no-map;
  };

  adsp_mem: memory@91100000 {
   reg = <0x0 0x91100000 0x0 0x2800000>;
   no-map;
  };

  wlan_mem: memory@93900000 {
   reg = <0x0 0x93900000 0x0 0x200000>;
   no-map;
  };

  ipa_fw_mem: memory@93b00000 {
   reg = <0x0 0x93b00000 0x0 0x10000>;
   no-map;
  };

  gpu_mem: memory@93b15000 {
   reg = <0x0 0x93b15000 0x0 0x2000>;
   no-map;
  };

  cont_splash_mem: memory@9c000000 {
   reg = <0x0 0x9c000000 0x0 (1080 * 2400 * 4)>;
   no-map;
  };

  pstore_mem: ramoops@9d800000 {
   compatible = "ramoops";
   reg = <0x0 0x9d800000 0x0 0x400000>;
   record-size = <0x80000>;
   pmsg-size = <0x200000>;
   console-size = <0x100000>;
  };

  rmtfs_mem: memory@fa601000 {
   compatible = "qcom,rmtfs-mem";
   reg = <0x0 0xfa601000 0x0 0x200000>;
   no-map;

   qcom,client-id = <1>;
   qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
  };
 };
};

&apps_rsc {
 regulators-0 {
  compatible = "qcom,pm6150-rpmh-regulators";
  qcom,pmic-id = "a";

  vreg_s1a_1p1: smps1 {
   regulator-min-microvolt = <1128000>;
   regulator-max-microvolt = <1128000>;
  };

  vreg_s4a_1p0: smps4 {
   regulator-min-microvolt = <824000>;
   regulator-max-microvolt = <1120000>;
  };

  vreg_s5a_2p0: smps5 {
   regulator-min-microvolt = <1744000>;
   regulator-max-microvolt = <2040000>;
  };

  vreg_l1a_1p2: ldo1 {
   regulator-min-microvolt = <1178000>;
   regulator-max-microvolt = <1256000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l2a_1p0: ldo2 {
   regulator-min-microvolt = <944000>;
   regulator-max-microvolt = <1056000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l3a_1p0: ldo3 {
   regulator-min-microvolt = <968000>;
   regulator-max-microvolt = <1064000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l4a_0p88: ldo4 {
   regulator-min-microvolt = <824000>;
   regulator-max-microvolt = <928000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l5a_2p7: ldo5 {
   regulator-min-microvolt = <2496000>;
   regulator-max-microvolt = <3000000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l6a_0p6: ldo6 {
   regulator-min-microvolt = <568000>;
   regulator-max-microvolt = <648000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l9a_0p664: ldo9 {
   regulator-min-microvolt = <488000>;
   regulator-max-microvolt = <800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l10a_1p8: ldo10 {
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1832000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l11a_1p8: ldo11 {
   regulator-min-microvolt = <1696000>;
   regulator-max-microvolt = <1904000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l12a_1p8: ldo12 {
   regulator-min-microvolt = <1696000>;
   regulator-max-microvolt = <1952000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l13a_1p8: ldo13 {
   regulator-min-microvolt = <1696000>;
   regulator-max-microvolt = <1904000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l14a_1p8: ldo14 {
   regulator-min-microvolt = <1728000>;
   regulator-max-microvolt = <1832000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l15a_1p8: ldo15 {
   regulator-min-microvolt = <1696000>;
   regulator-max-microvolt = <1904000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l16a_2p7: ldo16 {
   regulator-min-microvolt = <2496000>;
   regulator-max-microvolt = <3304000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l17a_3p1: ldo17 {
   regulator-min-microvolt = <2920000>;
   regulator-max-microvolt = <3232000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l18a_3p0: ldo18 {
   regulator-min-microvolt = <1696000>;
   regulator-max-microvolt = <1904000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l19a_3p0: ldo19 {
   regulator-min-microvolt = <2696000>;
   regulator-max-microvolt = <3304000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };
 };

 regulators-1 {
  compatible = "qcom,pm6150l-rpmh-regulators";
  qcom,pmic-id = "c";

  vreg_s8c_1p3: smps8 {
   regulator-min-microvolt = <1120000>;
   regulator-max-microvolt = <1408000>;
  };

  vreg_l1c_1p8: ldo1 {
   regulator-min-microvolt = <1616000>;
   regulator-max-microvolt = <1984000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l2c_1p3: ldo2 {
   regulator-min-microvolt = <1168000>;
   regulator-max-microvolt = <1304000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l3c_1p23: ldo3 {
   regulator-min-microvolt = <1144000>;
   regulator-max-microvolt = <1304000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l4c_1p8: ldo4 {
   regulator-min-microvolt = <1648000>;
   regulator-max-microvolt = <3304000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l5c_1p8: ldo5 {
   regulator-min-microvolt = <1648000>;
   regulator-max-microvolt = <3304000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l6c_3p0: ldo6 {
   regulator-min-microvolt = <1648000>;
   regulator-max-microvolt = <3304000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l7c_3p0: ldo7 {
   regulator-min-microvolt = <3000000>;
   regulator-max-microvolt = <3312000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l8c_1p8: ldo8 {
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1904000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l9c_2p9: ldo9 {
   regulator-min-microvolt = <2952000>;
   regulator-max-microvolt = <3304000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l10c_3p3: ldo10 {
   regulator-min-microvolt = <3000000>;
   regulator-max-microvolt = <3400000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l11c_3p3: ldo11 {
   regulator-min-microvolt = <3000000>;
   regulator-max-microvolt = <3400000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_bob: bob {
   regulator-min-microvolt = <3008000>;
   regulator-max-microvolt = <3960000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
  };
 };
};

&dispcc {
 /* HACK: disable until a panel driver is ready to retain simplefb */
 status = "disabled";
};

&pm6150_resin {
 linux,code = <KEY_VOLUMEDOWN>;
 status = "okay";
};

&pm6150_rtc {
 status = "okay";
};

&sdhc_2 {
 cd-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>;
 pinctrl-names = "default","sleep";
 pinctrl-0 = <&sdc2_on>;
 pinctrl-1 = <&sdc2_off>;
 vmmc-supply = <&vreg_l9c_2p9>;
 vqmmc-supply = <&vreg_l6c_3p0>;
 status = "okay";
};

&tlmm {
 gpio-reserved-ranges = <0 4>, <34 4>, <59 4>;

 sdc2_on: sdc2-on-state {
  clk-pins {
   pins = "sdc2_clk";
   bias-disable;
   drive-strength = <16>;
  };

  cmd-pins {
   pins = "sdc2_cmd";
   bias-pull-up;
   drive-strength = <10>;
  };

  data-pins {
   pins = "sdc2_data";
   bias-pull-up;
   drive-strength = <10>;
  };

  sd-cd-pins {
   pins = "gpio69";
   function = "gpio";
   bias-pull-up;
   drive-strength = <2>;
  };
 };

 sdc2_off: sdc2-off-state {
  clk-pins {
   pins = "sdc2_clk";
   bias-disable;
   drive-strength = <2>;
  };

  cmd-pins {
   pins = "sdc2_cmd";
   bias-pull-up;
   drive-strength = <2>;
  };

  data-pins {
   pins = "sdc2_data";
   bias-pull-up;
   drive-strength = <2>;
  };

  sd-cd-pins {
   pins = "gpio69";
   function = "gpio";
   bias-pull-up;
   drive-strength = <2>;
  };
 };
};

&ufs_mem_hc {
 reset-gpios = <&tlmm 119 GPIO_ACTIVE_LOW>;

 vcc-supply = <&vreg_l19a_3p0>;
 vcc-max-microamp = <600000>;
 vccq2-supply = <&vreg_l12a_1p8>;
 vccq2-max-microamp = <600000>;
 status = "okay";
};

&ufs_mem_phy {
 vdda-phy-supply = <&vreg_l4a_0p88>;
 vdda-pll-supply = <&vreg_l3c_1p23>;
 status = "okay";
};

&usb_1 {
 qcom,select-utmi-as-pipe-clk;
 status = "okay";
};

&usb_1_dwc3 {
 dr_mode = "peripheral";
 maximum-speed = "high-speed";
 status = "okay";
};

&usb_1_hsphy {
 vdd-supply = <&vreg_l4a_0p88>;
 vdda-phy-dpdm-supply = <&vreg_l17a_3p1>;
 vdda-pll-supply = <&vreg_l11a_1p8>;
 status = "okay";
};

&usb_1_qmpphy {
 vdda-phy-supply = <&vreg_l4a_0p88>;
 vdda-pll-supply = <&vreg_l3c_1p23>;
 status = "okay";
};