Quelle  sm8550-mtp.dts   Sprache: unbekannt

// SPDX-License-Identifier: BSD-3-Clause
/*
 * Copyright (c) 2022, Linaro Limited
 */

/dts-v1/;

#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "sm8550.dtsi"
#include "pm8010.dtsi"
#include "pm8550.dtsi"
#include "pm8550b.dtsi"
#define PMK8550VE_SID 5
#include "pm8550ve.dtsi"
#include "pm8550vs.dtsi"
#include "pmk8550.dtsi"
#include "pmr735d_a.dtsi"
#include "pmr735d_b.dtsi"

/ {
 model = "Qualcomm Technologies, Inc. SM8550 MTP";
 compatible = "qcom,sm8550-mtp", "qcom,sm8550";
 chassis-type = "handset";

 aliases {
  serial0 = &uart7;
 };

 wcd938x: audio-codec {
  compatible = "qcom,wcd9385-codec";

  pinctrl-names = "default";
  pinctrl-0 = <&wcd_default>;

  qcom,micbias1-microvolt = <1800000>;
  qcom,micbias2-microvolt = <1800000>;
  qcom,micbias3-microvolt = <1800000>;
  qcom,micbias4-microvolt = <1800000>;
  qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
  qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
  qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
  qcom,rx-device = <&wcd_rx>;
  qcom,tx-device = <&wcd_tx>;

  reset-gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;

  vdd-buck-supply = <&vreg_l15b_1p8>;
  vdd-rxtx-supply = <&vreg_l15b_1p8>;
  vdd-io-supply = <&vreg_l15b_1p8>;
  vdd-mic-bias-supply = <&vreg_bob1>;

  #sound-dai-cells = <1>;
 };

 chosen {
  stdout-path = "serial0:115200n8";
 };

 pmic-glink {
  compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink";
  #address-cells = <1>;
  #size-cells = <0>;
  orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;

  connector@0 {
   compatible = "usb-c-connector";
   reg = <0>;
   power-role = "dual";
   data-role = "dual";

   ports {
    #address-cells = <1>;
    #size-cells = <0>;

    port@0 {
     reg = <0>;

     pmic_glink_hs_in: endpoint {
      remote-endpoint = <&usb_1_dwc3_hs>;
     };
    };

    port@1 {
     reg = <1>;

     pmic_glink_ss_in: endpoint {
      remote-endpoint = <&usb_dp_qmpphy_out>;
     };
    };

    port@2 {
     reg = <2>;

     pmic_glink_sbu: endpoint {
      remote-endpoint = <&fsa4480_sbu_mux>;
     };
    };
   };
  };
 };

 sound {
  compatible = "qcom,sm8550-sndcard", "qcom,sm8450-sndcard";
  model = "SM8550-MTP";
  audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
    "SpkrRight IN", "WSA_SPK2 OUT",
    "IN1_HPHL", "HPHL_OUT",
    "IN2_HPHR", "HPHR_OUT",
    "AMIC1", "MIC BIAS1",
    "AMIC2", "MIC BIAS2",
    "AMIC3", "MIC BIAS3",
    "AMIC4", "MIC BIAS3",
    "AMIC5", "MIC BIAS4",
    "VA DMIC0", "MIC BIAS1",
    "VA DMIC1", "MIC BIAS1",
    "VA DMIC2", "MIC BIAS3",
    "TX DMIC0", "MIC BIAS1",
    "TX DMIC1", "MIC BIAS2",
    "TX DMIC2", "MIC BIAS3",
    "TX SWR_INPUT0", "ADC1_OUTPUT",
    "TX SWR_INPUT1", "ADC2_OUTPUT",
    "TX SWR_INPUT0", "ADC3_OUTPUT",
    "TX SWR_INPUT1", "ADC4_OUTPUT";

  wcd-playback-dai-link {
   link-name = "WCD Playback";

   cpu {
    sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
   };

   codec {
    sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
   };

   platform {
    sound-dai = <&q6apm>;
   };
  };

  wcd-capture-dai-link {
   link-name = "WCD Capture";

   cpu {
    sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
   };

   codec {
    sound-dai = <&wcd938x 1>, <&swr2 0>, <&lpass_txmacro 0>;
   };

   platform {
    sound-dai = <&q6apm>;
   };
  };

  wsa-dai-link {
   link-name = "WSA Playback";

   cpu {
    sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
   };

   codec {
    sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
   };

   platform {
    sound-dai = <&q6apm>;
   };
  };

  va-dai-link {
   link-name = "VA Capture";

   cpu {
    sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
   };

   codec {
    sound-dai = <&lpass_vamacro 0>;
   };

   platform {
    sound-dai = <&q6apm>;
   };
  };
 };

 vph_pwr: vph-pwr-regulator {
  compatible = "regulator-fixed";
  regulator-name = "vph_pwr";
  regulator-min-microvolt = <3700000>;
  regulator-max-microvolt = <3700000>;

  regulator-always-on;
  regulator-boot-on;
 };
};

&apps_rsc {
 regulators-0 {
  compatible = "qcom,pm8550-rpmh-regulators";
  qcom,pmic-id = "b";

  vdd-bob1-supply = <&vph_pwr>;
  vdd-bob2-supply = <&vph_pwr>;
  vdd-l1-l4-l10-supply = <&vreg_s6g_1p8>;
  vdd-l2-l13-l14-supply = <&vreg_bob1>;
  vdd-l3-supply = <&vreg_s4g_1p3>;
  vdd-l5-l16-supply = <&vreg_bob1>;
  vdd-l6-l7-supply = <&vreg_bob1>;
  vdd-l8-l9-supply = <&vreg_bob1>;
  vdd-l11-supply = <&vreg_s4g_1p3>;
  vdd-l12-supply = <&vreg_s6g_1p8>;
  vdd-l15-supply = <&vreg_s6g_1p8>;
  vdd-l17-supply = <&vreg_bob2>;

  vreg_bob1: bob1 {
   regulator-name = "vreg_bob1";
   regulator-min-microvolt = <3296000>;
   regulator-max-microvolt = <3960000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_bob2: bob2 {
   regulator-name = "vreg_bob2";
   regulator-min-microvolt = <2720000>;
   regulator-max-microvolt = <3960000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l1b_1p8: ldo1 {
   regulator-name = "vreg_l1b_1p8";
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l2b_3p0: ldo2 {
   regulator-name = "vreg_l2b_3p0";
   regulator-min-microvolt = <3008000>;
   regulator-max-microvolt = <3008000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l5b_3p1: ldo5 {
   regulator-name = "vreg_l5b_3p1";
   regulator-min-microvolt = <3104000>;
   regulator-max-microvolt = <3104000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l6b_1p8: ldo6 {
   regulator-name = "vreg_l6b_1p8";
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <3008000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l7b_1p8: ldo7 {
   regulator-name = "vreg_l7b_1p8";
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <3008000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l8b_1p8: ldo8 {
   regulator-name = "vreg_l8b_1p8";
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <3008000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l9b_2p9: ldo9 {
   regulator-name = "vreg_l9b_2p9";
   regulator-min-microvolt = <2960000>;
   regulator-max-microvolt = <3008000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l11b_1p2: ldo11 {
   regulator-name = "vreg_l11b_1p2";
   regulator-min-microvolt = <1200000>;
   regulator-max-microvolt = <1504000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l12b_1p8: ldo12 {
   regulator-name = "vreg_l12b_1p8";
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l13b_3p0: ldo13 {
   regulator-name = "vreg_l13b_3p0";
   regulator-min-microvolt = <3000000>;
   regulator-max-microvolt = <3000000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l14b_3p2: ldo14 {
   regulator-name = "vreg_l14b_3p2";
   regulator-min-microvolt = <3200000>;
   regulator-max-microvolt = <3200000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l15b_1p8: ldo15 {
   regulator-name = "vreg_l15b_1p8";
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l16b_2p8: ldo16 {
   regulator-name = "vreg_l16b_2p8";
   regulator-min-microvolt = <2800000>;
   regulator-max-microvolt = <2800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l17b_2p5: ldo17 {
   regulator-name = "vreg_l17b_2p5";
   regulator-min-microvolt = <2504000>;
   regulator-max-microvolt = <2504000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };
 };

 regulators-1 {
  compatible = "qcom,pm8550vs-rpmh-regulators";
  qcom,pmic-id = "c";

  vdd-l3-supply = <&vreg_s4e_0p9>;

  vreg_l3c_0p91: ldo3 {
   regulator-name = "vreg_l3c_0p9";
   regulator-min-microvolt = <880000>;
   regulator-max-microvolt = <912000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };
 };

 regulators-2 {
  compatible = "qcom,pm8550vs-rpmh-regulators";
  qcom,pmic-id = "d";

  vdd-l1-supply = <&vreg_s4e_0p9>;

  vreg_l1d_0p88: ldo1 {
   regulator-name = "vreg_l1d_0p88";
   regulator-min-microvolt = <880000>;
   regulator-max-microvolt = <920000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };
 };

 regulators-3 {
  compatible = "qcom,pm8550vs-rpmh-regulators";
  qcom,pmic-id = "e";

  vdd-l1-supply = <&vreg_s4e_0p9>;
  vdd-l2-supply = <&vreg_s4e_0p9>;
  vdd-l3-supply = <&vreg_s4g_1p3>;
  vdd-s4-supply = <&vph_pwr>;
  vdd-s5-supply = <&vph_pwr>;

  vreg_s4e_0p9: smps4 {
   regulator-name = "vreg_s4e_0p9";
   regulator-min-microvolt = <904000>;
   regulator-max-microvolt = <984000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_s5e_1p1: smps5 {
   regulator-name = "vreg_s5e_1p1";
   regulator-min-microvolt = <1080000>;
   regulator-max-microvolt = <1120000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l1e_0p88: ldo1 {
   regulator-name = "vreg_l1e_0p88";
   regulator-min-microvolt = <880000>;
   regulator-max-microvolt = <880000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l2e_0p9: ldo2 {
   regulator-name = "vreg_l2e_0p9";
   regulator-min-microvolt = <904000>;
   regulator-max-microvolt = <970000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l3e_1p2: ldo3 {
   regulator-name = "vreg_l3e_1p2";
   regulator-min-microvolt = <1200000>;
   regulator-max-microvolt = <1200000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };
 };

 regulators-4 {
  compatible = "qcom,pm8550ve-rpmh-regulators";
  qcom,pmic-id = "f";

  vdd-l1-supply = <&vreg_s4e_0p9>;
  vdd-l2-supply = <&vreg_s4e_0p9>;
  vdd-l3-supply = <&vreg_s4e_0p9>;
  vdd-s4-supply = <&vph_pwr>;

  vreg_s4f_0p5: smps4 {
   regulator-name = "vreg_s4f_0p5";
   regulator-min-microvolt = <500000>;
   regulator-max-microvolt = <700000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l1f_0p9: ldo1 {
   regulator-name = "vreg_l1f_0p9";
   regulator-min-microvolt = <912000>;
   regulator-max-microvolt = <912000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l2f_0p88: ldo2 {
   regulator-name = "vreg_l2f_0p88";
   regulator-min-microvolt = <880000>;
   regulator-max-microvolt = <912000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l3f_0p91: ldo3 {
   regulator-name = "vreg_l3f_0p91";
   regulator-min-microvolt = <880000>;
   regulator-max-microvolt = <912000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };
 };

 regulators-5 {
  compatible = "qcom,pm8550vs-rpmh-regulators";
  qcom,pmic-id = "g";

  vdd-l1-supply = <&vreg_s4g_1p3>;
  vdd-l2-supply = <&vreg_s4g_1p3>;
  vdd-l3-supply = <&vreg_s4g_1p3>;
  vdd-s1-supply = <&vph_pwr>;
  vdd-s2-supply = <&vph_pwr>;
  vdd-s3-supply = <&vph_pwr>;
  vdd-s4-supply = <&vph_pwr>;
  vdd-s5-supply = <&vph_pwr>;
  vdd-s6-supply = <&vph_pwr>;

  vreg_s1g_1p2: smps1 {
   regulator-name = "vreg_s1g_1p2";
   regulator-min-microvolt = <1200000>;
   regulator-max-microvolt = <1300000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_s2g_0p8: smps2 {
   regulator-name = "vreg_s2g_0p8";
   regulator-min-microvolt = <800000>;
   regulator-max-microvolt = <1000000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_s3g_0p7: smps3 {
   regulator-name = "vreg_s3g_0p7";
   regulator-min-microvolt = <300000>;
   regulator-max-microvolt = <1004000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_s4g_1p3: smps4 {
   regulator-name = "vreg_s4g_1p3";
   regulator-min-microvolt = <1200000>;
   regulator-max-microvolt = <1352000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_s5g_0p8: smps5 {
   regulator-name = "vreg_s5g_0p8";
   regulator-min-microvolt = <500000>;
   regulator-max-microvolt = <1004000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_s6g_1p8: smps6 {
   regulator-name = "vreg_s6g_1p8";
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <2000000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l1g_1p2: ldo1 {
   regulator-name = "vreg_l1g_1p2";
   regulator-min-microvolt = <1200000>;
   regulator-max-microvolt = <1200000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l2g_1p2: ldo2 {
   regulator-name = "vreg_l2g_1p2";
   regulator-min-microvolt = <1200000>;
   regulator-max-microvolt = <1200000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l3g_1p2: ldo3 {
   regulator-name = "vreg_l3g_1p2";
   regulator-min-microvolt = <1200000>;
   regulator-max-microvolt = <1200000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };
 };

 regulators-6 {
  compatible = "qcom,pm8010-rpmh-regulators";
  qcom,pmic-id = "m";

  vdd-l1-l2-supply = <&vreg_s4g_1p3>;
  vdd-l3-l4-supply = <&vreg_bob2>;
  vdd-l5-supply = <&vreg_s6g_1p8>;
  vdd-l6-supply = <&vreg_s6g_1p8>;
  vdd-l7-supply = <&vreg_bob1>;

  vreg_l1m_1p056: ldo1 {
   regulator-name = "vreg_l1m_1p056";
   regulator-min-microvolt = <1056000>;
   regulator-max-microvolt = <1056000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l2m_1p056: ldo2 {
   regulator-name = "vreg_l2m_1p056";
   regulator-min-microvolt = <1056000>;
   regulator-max-microvolt = <1056000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l3m_2p8: ldo3 {
   regulator-name = "vreg_l3m_2p8";
   regulator-min-microvolt = <2800000>;
   regulator-max-microvolt = <2800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l4m_2p8: ldo4 {
   regulator-name = "vreg_l4m_2p8";
   regulator-min-microvolt = <2800000>;
   regulator-max-microvolt = <2800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l5m_1p8: ldo5 {
   regulator-name = "vreg_l5m_1p8";
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l6m_1p8: ldo6 {
   regulator-name = "vreg_l6m_1p8";
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l7m_2p9: ldo7 {
   regulator-name = "vreg_l7m_2p9";
   regulator-min-microvolt = <2800000>;
   regulator-max-microvolt = <2904000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };
 };

 regulators-7 {
  compatible = "qcom,pm8010-rpmh-regulators";
  qcom,pmic-id = "n";

  vdd-l1-l2-supply = <&vreg_s4g_1p3>;
  vdd-l3-l4-supply = <&vreg_bob2>;
  vdd-l5-supply = <&vreg_s6g_1p8>;
  vdd-l6-supply = <&vreg_bob1>;
  vdd-l7-supply = <&vreg_bob1>;

  vreg_l1n_1p1: ldo1 {
   regulator-name = "vreg_l1n_1p1";
   regulator-min-microvolt = <1104000>;
   regulator-max-microvolt = <1200000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l2n_1p1: ldo2 {
   regulator-name = "vreg_l2n_1p1";
   regulator-min-microvolt = <1104000>;
   regulator-max-microvolt = <1200000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l3n_2p8: ldo3 {
   regulator-name = "vreg_l3n_2p8";
   regulator-min-microvolt = <2800000>;
   regulator-max-microvolt = <3000000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l4n_2p8: ldo4 {
   regulator-name = "vreg_l4n_2p8";
   regulator-min-microvolt = <2800000>;
   regulator-max-microvolt = <3300000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l5n_1p8: ldo5 {
   regulator-name = "vreg_l5n_1p8";
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l6n_3p3: ldo6 {
   regulator-name = "vreg_l6n_3p3";
   regulator-min-microvolt = <2800000>;
   regulator-max-microvolt = <3304000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l7n_2p96: ldo7 {
   regulator-name = "vreg_l7n_2p96";
   regulator-min-microvolt = <2800000>;
   regulator-max-microvolt = <2960000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };
 };
};

&gpu {
 status = "okay";

 zap-shader {
  firmware-name = "qcom/sm8550/a740_zap.mbn";
 };
};

&i2c_master_hub_0 {
 status = "okay";
};

&i2c_hub_2 {
 status = "okay";

 typec-mux@42 {
  compatible = "fcs,fsa4480";
  reg = <0x42>;

  vcc-supply = <&vreg_bob1>;

  mode-switch;
  orientation-switch;

  port {
   fsa4480_sbu_mux: endpoint {
    remote-endpoint = <&pmic_glink_sbu>;
   };
  };
 };
};

&iris {
 status = "okay";
};

&lpass_tlmm {
 spkr_1_sd_n_active: spkr-1-sd-n-active-state {
  pins = "gpio17";
  function = "gpio";
  drive-strength = <16>;
  bias-disable;
  output-low;
 };

 spkr_2_sd_n_active: spkr-2-sd-n-active-state {
  pins = "gpio18";
  function = "gpio";
  drive-strength = <16>;
  bias-disable;
  output-low;
 };
};

&mdss {
 status = "okay";
};

&mdss_dsi0 {
 vdda-supply = <&vreg_l3e_1p2>;
 status = "okay";

 panel@0 {
  compatible = "visionox,vtdr6130";
  reg = <0>;

  pinctrl-names = "default", "sleep";
  pinctrl-0 = <&sde_dsi_active>, <&sde_te_active>;
  pinctrl-1 = <&sde_dsi_suspend>, <&sde_te_suspend>;

  vddio-supply = <&vreg_l12b_1p8>;
  vci-supply = <&vreg_l13b_3p0>;
  vdd-supply = <&vreg_l11b_1p2>;

  reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;

  port {
   panel0_in: endpoint {
    remote-endpoint = <&mdss_dsi0_out>;
   };
  };
 };
};

&mdss_dsi0_out {
 remote-endpoint = <&panel0_in>;
 data-lanes = <0 1 2 3>;
};

&mdss_dsi0_phy {
 vdds-supply = <&vreg_l1e_0p88>;
 status = "okay";
};

&mdss_dp0 {
 status = "okay";
};

&mdss_dp0_out {
 data-lanes = <0 1>;
};

&pcie0 {
 wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
 perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;

 pinctrl-names = "default";
 pinctrl-0 = <&pcie0_default_state>;

 status = "okay";
};

&pcie0_phy {
 vdda-phy-supply = <&vreg_l1e_0p88>;
 vdda-pll-supply = <&vreg_l3e_1p2>;

 status = "okay";
};

&pcie1 {
 wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
 perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;

 pinctrl-names = "default";
 pinctrl-0 = <&pcie1_default_state>;

 status = "okay";
};

&pcie1_phy {
 vdda-phy-supply = <&vreg_l3c_0p91>;
 vdda-pll-supply = <&vreg_l3e_1p2>;
 vdda-qref-supply = <&vreg_l1e_0p88>;

 status = "okay";
};

&pm8550_gpios {
 sdc2_card_det_n: sdc2-card-det-state {
  pins = "gpio12";
  function = "normal";
  input-enable;
  output-disable;
  bias-pull-up;
  power-source = <1>; /* 1.8 V */
 };
};

&pm8550b_eusb2_repeater {
 vdd18-supply = <&vreg_l15b_1p8>;
 vdd3-supply = <&vreg_l5b_3p1>;
};

&qupv3_id_0 {
 status = "okay";
};

&remoteproc_adsp {
 firmware-name = "qcom/sm8550/adsp.mbn",
   "qcom/sm8550/adsp_dtb.mbn";
 status = "okay";
};

&remoteproc_cdsp {
 firmware-name = "qcom/sm8550/cdsp.mbn",
   "qcom/sm8550/cdsp_dtb.mbn";
 status = "okay";
};

&remoteproc_mpss {
 firmware-name = "qcom/sm8550/modem.mbn",
   "qcom/sm8550/modem_dtb.mbn";
 status = "okay";
};

&sdhc_2 {
 cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_LOW>;
 pinctrl-names = "default", "sleep";
 pinctrl-0 = <&sdc2_default &sdc2_card_det_n>;
 pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>;
 vmmc-supply = <&vreg_l9b_2p9>;
 vqmmc-supply = <&vreg_l8b_1p8>;
 bus-width = <4>;
 no-sdio;
 no-mmc;
 status = "okay";
};

&sleep_clk {
 clock-frequency = <32764>;
};

&swr0 {
 status = "okay";

 /* WSA8845 */
 left_spkr: speaker@0,0 {
  compatible = "sdw20217020400";
  reg = <0 0>;
  pinctrl-names = "default";
  pinctrl-0 = <&spkr_1_sd_n_active>;
  powerdown-gpios = <&lpass_tlmm 17 GPIO_ACTIVE_LOW>;
  #sound-dai-cells = <0>;
  sound-name-prefix = "SpkrLeft";
  vdd-1p8-supply = <&vreg_l15b_1p8>;
  vdd-io-supply = <&vreg_l3g_1p2>;
  qcom,port-mapping = <1 2 3 7 10 13>;
 };

 /* WSA8845 */
 right_spkr: speaker@0,1 {
  compatible = "sdw20217020400";
  reg = <0 1>;
  pinctrl-names = "default";
  pinctrl-0 = <&spkr_2_sd_n_active>;
  powerdown-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>;
  #sound-dai-cells = <0>;
  sound-name-prefix = "SpkrRight";
  vdd-1p8-supply = <&vreg_l15b_1p8>;
  vdd-io-supply = <&vreg_l3g_1p2>;
  qcom,port-mapping = <4 5 6 7 11 13>;
 };
};

&swr1 {
 status = "okay";

 /* WCD9385 RX */
 wcd_rx: codec@0,4 {
  compatible = "sdw20217010d00";
  reg = <0 4>;
  qcom,rx-port-mapping = <1 2 3 4 5>;
 };
};

&swr2 {
 status = "okay";

 /* WCD9385 TX */
 wcd_tx: codec@0,3 {
  compatible = "sdw20217010d00";
  reg = <0 3>;
  qcom,tx-port-mapping = <2 2 3 4>;
 };
};

&tlmm {
 gpio-reserved-ranges = <32 8>;

 sde_dsi_active: sde-dsi-active-state {
  pins = "gpio133";
  function = "gpio";
  drive-strength = <8>;
  bias-disable;
 };

 sde_dsi_suspend: sde-dsi-suspend-state {
  pins = "gpio133";
  function = "gpio";
  drive-strength = <2>;
  bias-pull-down;
 };

 sde_te_active: sde-te-active-state {
  pins = "gpio86";
  function = "mdp_vsync";
  drive-strength = <2>;
  bias-pull-down;
 };

 sde_te_suspend: sde-te-suspend-state {
  pins = "gpio86";
  function = "mdp_vsync";
  drive-strength = <2>;
  bias-pull-down;
 };

 wcd_default: wcd-reset-n-active-state {
  pins = "gpio108";
  function = "gpio";
  drive-strength = <16>;
  bias-disable;
  output-low;
 };
};

&uart7 {
 status = "okay";
};

&ufs_mem_hc {
 reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
 vcc-supply = <&vreg_l17b_2p5>;
 vcc-max-microamp = <1300000>;
 vccq-supply = <&vreg_l1g_1p2>;
 vccq-max-microamp = <1200000>;
 vdd-hba-supply = <&vreg_l3g_1p2>;

 status = "okay";
};

&ufs_mem_phy {
 vdda-phy-supply = <&vreg_l1d_0p88>;
 vdda-pll-supply = <&vreg_l3e_1p2>;

 status = "okay";
};

&usb_1 {
 status = "okay";
};

&usb_1_dwc3_hs {
 remote-endpoint = <&pmic_glink_hs_in>;
};

&usb_1_hsphy {
 vdd-supply = <&vreg_l1e_0p88>;
 vdda12-supply = <&vreg_l3e_1p2>;

 phys = <&pm8550b_eusb2_repeater>;

 status = "okay";
};

&usb_dp_qmpphy {
 vdda-phy-supply = <&vreg_l3e_1p2>;
 vdda-pll-supply = <&vreg_l3f_0p91>;

 status = "okay";
};

&usb_dp_qmpphy_out {
 remote-endpoint = <&pmic_glink_ss_in>;
};

&xo_board {
 clock-frequency = <76800000>;
};