Quelle  sm8750-mtp.dts   Sprache: unbekannt

// SPDX-License-Identifier: BSD-3-Clause
/*
 * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
 */

/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "sm8750.dtsi"
#include "pm8010.dtsi"
#include "pm8550.dtsi"
#define PMK8550VE_SID 8
#include "pm8550ve.dtsi"
#include "pmd8028.dtsi"
#include "pmih0108.dtsi"
#include "pmk8550.dtsi"
#include "pmr735d_a.dtsi"
#include "sm8750-pmics.dtsi"

/ {
 model = "Qualcomm Technologies, Inc. SM8750 MTP";
 compatible = "qcom,sm8750-mtp", "qcom,sm8750";
 chassis-type = "handset";


 aliases {
  serial0 = &uart7;
 };

 wcd939x: audio-codec {
  compatible = "qcom,wcd9395-codec", "qcom,wcd9390-codec";

  pinctrl-0 = <&wcd_default>;
  pinctrl-names = "default";

  qcom,micbias1-microvolt = <1800000>;
  qcom,micbias2-microvolt = <1800000>;
  qcom,micbias3-microvolt = <1800000>;
  qcom,micbias4-microvolt = <1800000>;
  qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
  qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
  qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
  qcom,rx-device = <&wcd_rx>;
  qcom,tx-device = <&wcd_tx>;

  reset-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;

  vdd-buck-supply = <&vreg_l15b_1p8>;
  vdd-rxtx-supply = <&vreg_l15b_1p8>;
  vdd-io-supply = <&vreg_l15b_1p8>;
  vdd-mic-bias-supply = <&vreg_bob1>;
  vdd-px-supply = <&vreg_l2i_1p2>;

  #sound-dai-cells = <1>;
 };

 chosen {
  stdout-path = "serial0:115200n8";
 };

 clocks {
  xo_board: xo-board {
   compatible = "fixed-clock";
   clock-frequency = <76800000>;
   #clock-cells = <0>;
  };

  sleep_clk: sleep-clk {
   compatible = "fixed-clock";
   clock-frequency = <32000>;
   #clock-cells = <0>;
  };

  bi_tcxo_div2: bi-tcxo-div2-clk {
   compatible = "fixed-factor-clock";
   #clock-cells = <0>;

   clocks = <&rpmhcc RPMH_CXO_CLK>;
   clock-mult = <1>;
   clock-div = <2>;
  };

  bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk {
   compatible = "fixed-factor-clock";
   #clock-cells = <0>;

   clocks = <&rpmhcc RPMH_CXO_CLK_A>;
   clock-mult = <1>;
   clock-div = <2>;
  };
 };

 gpio-keys {
  compatible = "gpio-keys";

  pinctrl-0 = <&volume_up_n>;
  pinctrl-names = "default";

  key-volume-up {
   label = "Volume Up";
   linux,code = <KEY_VOLUMEUP>;
   gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
   debounce-interval = <15>;
   linux,can-disable;
   wakeup-source;
  };
 };

 sound {
  compatible = "qcom,sm8750-sndcard", "qcom,sm8450-sndcard";
  model = "SM8750-MTP";
  audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
    "SpkrRight IN", "WSA_SPK2 OUT",
    "IN1_HPHL", "HPHL_OUT",
    "IN2_HPHR", "HPHR_OUT",
    "AMIC2", "MIC BIAS2",
    "VA DMIC0", "MIC BIAS3", /* MIC4 on schematics */
    "VA DMIC1", "MIC BIAS3", /* MIC1 on schematics */
    "VA DMIC2", "MIC BIAS1",
    "VA DMIC3", "MIC BIAS1",
    "VA DMIC0", "VA MIC BIAS3",
    "VA DMIC1", "VA MIC BIAS3",
    "VA DMIC2", "VA MIC BIAS1",
    "VA DMIC3", "VA MIC BIAS1",
    "TX SWR_INPUT1", "ADC2_OUTPUT";

  wcd-playback-dai-link {
   link-name = "WCD Playback";

   codec {
    sound-dai = <&wcd939x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
   };

   cpu {
    sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
   };

   platform {
    sound-dai = <&q6apm>;
   };
  };

  wcd-capture-dai-link {
   link-name = "WCD Capture";

   codec {
    sound-dai = <&wcd939x 1>, <&swr2 0>, <&lpass_txmacro 0>;
   };

   cpu {
    sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
   };

   platform {
    sound-dai = <&q6apm>;
   };
  };

  wsa-dai-link {
   link-name = "WSA Playback";

   codec {
    sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
   };

   cpu {
    sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
   };

   platform {
    sound-dai = <&q6apm>;
   };
  };

  va-dai-link {
   link-name = "VA Capture";

   codec {
    sound-dai = <&lpass_vamacro 0>;
   };

   cpu {
    sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
   };

   platform {
    sound-dai = <&q6apm>;
   };
  };
 };

 vph_pwr: vph-pwr-regulator {
  compatible = "regulator-fixed";

  regulator-name = "vph_pwr";
  regulator-min-microvolt = <3700000>;
  regulator-max-microvolt = <3700000>;

  regulator-always-on;
  regulator-boot-on;
 };
};

&apps_rsc {
 regulators-0 {
  compatible = "qcom,pm8550-rpmh-regulators";

  vdd-bob1-supply = <&vph_pwr>;
  vdd-bob2-supply = <&vph_pwr>;
  vdd-l1-l4-l10-supply = <&vreg_s3g_1p8>;
  vdd-l2-l13-l14-supply = <&vreg_bob1>;
  vdd-l3-supply = <&vreg_s7i_1p2>;
  vdd-l5-l16-supply = <&vreg_bob1>;
  vdd-l6-l7-supply = <&vreg_bob1>;
  vdd-l8-l9-supply = <&vreg_bob1>;
  vdd-l11-supply = <&vreg_s7i_1p2>;
  vdd-l12-supply = <&vreg_s3g_1p8>;
  vdd-l15-supply = <&vreg_s3g_1p8>;
  vdd-l17-supply = <&vreg_bob2>;

  qcom,pmic-id = "b";

  vreg_bob1: bob1 {
   regulator-name = "vreg_bob1";
   regulator-min-microvolt = <3008000>;
   regulator-max-microvolt = <4000000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_bob2: bob2 {
   regulator-name = "vreg_bob2";
   regulator-min-microvolt = <2704000>;
   regulator-max-microvolt = <3008000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l1b_1p8: ldo1 {
   regulator-name = "vreg_l1b_1p8";
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l2b_3p0: ldo2 {
   regulator-name = "vreg_l2b_3p0";
   regulator-min-microvolt = <3008000>;
   regulator-max-microvolt = <3048000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l4b_1p8: ldo4 {
   regulator-name = "vreg_l4b_1p8";
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l5b_3p1: ldo5 {
   regulator-name = "vreg_l5b_3p1";
   regulator-min-microvolt = <3100000>;
   regulator-max-microvolt = <3148000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l6b_1p8: ldo6 {
   regulator-name = "vreg_l6b_1p8";
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <3008000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l7b_1p8: ldo7 {
   regulator-name = "vreg_l7b_1p8";
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <3008000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;

  };

  vreg_l8b_1p8: ldo8 {
   regulator-name = "vreg_l8b_1p8";
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <3008000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l9b_2p9: ldo9 {
   regulator-name = "vreg_l9b_2p9";
   regulator-min-microvolt = <2960000>;
   regulator-max-microvolt = <3008000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l10b_1p8: ldo10 {
   regulator-name = "vreg_l10b_1p8";
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l11b_1p0: ldo11 {
   regulator-name = "vreg_l11b_1p0";
   regulator-min-microvolt = <1064000>;
   regulator-max-microvolt = <1292000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l12b_1p8: ldo12 {
   regulator-name = "vreg_l12b_1p8";
   regulator-min-microvolt = <1200000>;
   regulator-max-microvolt = <1800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l13b_3p0: ldo13 {
   regulator-name = "vreg_l13b_3p0";
   regulator-min-microvolt = <3000000>;
   regulator-max-microvolt = <3000000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l14b_3p2: ldo14 {
   regulator-name = "vreg_l14b_3p2";
   regulator-min-microvolt = <3200000>;
   regulator-max-microvolt = <3200000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l15b_1p8: ldo15 {
   regulator-name = "vreg_l15b_1p8";
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l16b_2p8: ldo16 {
   regulator-name = "vreg_l16b_2p8";
   regulator-min-microvolt = <2800000>;
   regulator-max-microvolt = <2800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l17b_2p5: ldo17 {
   regulator-name = "vreg_l17b_2p5";
   regulator-min-microvolt = <2504000>;
   regulator-max-microvolt = <2504000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };
 };

 regulators-1 {
  compatible = "qcom,pm8550ve-rpmh-regulators";

  vdd-l1-supply = <&vreg_s7i_1p2>;
  vdd-l2-supply = <&vreg_s1d_0p97>;
  vdd-l3-supply = <&vreg_s1d_0p97>;
  vdd-s1-supply = <&vph_pwr>;
  vdd-s3-supply = <&vph_pwr>;
  vdd-s4-supply = <&vph_pwr>;

  qcom,pmic-id = "d";

  vreg_s1d_0p97: smps1 {
   regulator-name = "vreg_s1d_0p97";
   regulator-min-microvolt = <880000>;
   regulator-max-microvolt = <1100000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_s3d_1p2: smps3 {
   regulator-name = "vreg_s3d_1p2";
   regulator-min-microvolt = <1200000>;
   regulator-max-microvolt = <1300000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_s4d_0p85: smps4 {
   regulator-name = "vreg_s4d_0p85";
   regulator-min-microvolt = <500000>;
   regulator-max-microvolt = <1036000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l1d_1p2: ldo1 {
   regulator-name = "vreg_l1d_1p2";
   regulator-min-microvolt = <1200000>;
   regulator-max-microvolt = <1200000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l2d_0p88: ldo2 {
   regulator-name = "vreg_l2d_0p88";
   regulator-min-microvolt = <880000>;
   regulator-max-microvolt = <912000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l3d_0p88: ldo3 {
   regulator-name = "vreg_l3d_0p88";
   regulator-min-microvolt = <880000>;
   regulator-max-microvolt = <920000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };
 };

 regulators-2 {
  compatible = "qcom,pm8550ve-rpmh-regulators";

  vdd-l1-supply = <&vreg_s1d_0p97>;
  vdd-l2-supply = <&vreg_s7i_1p2>;
  vdd-l3-supply = <&vreg_s3g_1p8>;
  vdd-s5-supply = <&vph_pwr>;

  qcom,pmic-id = "f";

  vreg_s5f_0p5: smps5 {
   regulator-name = "vreg_s5f_0p5";
   regulator-min-microvolt = <500000>;
   regulator-max-microvolt = <1000000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l1f_0p88: ldo1 {
   regulator-name = "vreg_l1f_0p88";
   regulator-min-microvolt = <880000>;
   regulator-max-microvolt = <920000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l2f_1p2: ldo2 {
   regulator-name = "vreg_l2f_1p2";
   regulator-min-microvolt = <1200000>;
   regulator-max-microvolt = <1200000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l3f_1p8: ldo3 {
   regulator-name = "vreg_l3f_1p8";
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

 };

 regulators-3 {
  compatible = "qcom,pm8550ve-rpmh-regulators";

  vdd-l1-supply = <&vreg_s1d_0p97>;
  vdd-l2-supply = <&vreg_s3g_1p8>;
  vdd-l3-supply = <&vreg_s7i_1p2>;
  vdd-s1-supply = <&vph_pwr>;
  vdd-s3-supply = <&vph_pwr>;

  qcom,pmic-id = "g";

  vreg_s1g_0p5: smps1 {
   regulator-name = "vreg_s1g_0p5";
   regulator-min-microvolt = <300000>;
   regulator-max-microvolt = <700000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_s3g_1p8: smps3 {
   regulator-name = "vreg_s3g_1p8";
   regulator-min-microvolt = <1856000>;
   regulator-max-microvolt = <2000000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_s4g_0p75: smps4 {
   regulator-name = "vreg_s4g_0p75";
   regulator-min-microvolt = <300000>;
   regulator-max-microvolt = <900000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l1g_0p91: ldo1 {
   regulator-name = "vreg_l1g_0p91";
   regulator-min-microvolt = <912000>;
   regulator-max-microvolt = <936000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l2g_1p8: ldo2 {
   regulator-name = "vreg_l2g_1p8";
   regulator-min-microvolt = <1200000>;
   regulator-max-microvolt = <1860000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l3g_1p2: ldo3 {
   regulator-name = "vreg_l3g_1p2";
   regulator-min-microvolt = <1200000>;
   regulator-max-microvolt = <1256000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };
 };

 regulators-4 {
  compatible = "qcom,pm8550ve-rpmh-regulators";

  vdd-l1-supply = <&vreg_s7i_1p2>;
  vdd-l2-supply = <&vreg_s7i_1p2>;
  vdd-l3-supply = <&vreg_s1d_0p97>;
  vdd-s7-supply = <&vph_pwr>;
  vdd-s8-supply = <&vph_pwr>;

  qcom,pmic-id = "i";

  vreg_s7i_1p2: smps7 {
   regulator-name = "vreg_s7i_1p2";
   regulator-min-microvolt = <1224000>;
   regulator-max-microvolt = <1340000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_s8i_0p9: smps8 {
   regulator-name = "vreg_s8i_0p9";
   regulator-min-microvolt = <900000>;
   regulator-max-microvolt = <972000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l1i_1p2: ldo1 {
   regulator-name = "vreg_l1i_1p2";
   regulator-min-microvolt = <1200000>;
   regulator-max-microvolt = <1200000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l2i_1p2: ldo2 {
   regulator-name = "vreg_l2i_1p2";
   regulator-min-microvolt = <1200000>;
   regulator-max-microvolt = <1200000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l3i_0p88: ldo3 {
   regulator-name = "vreg_l3i_0p88";
   regulator-min-microvolt = <880000>;
   regulator-max-microvolt = <912000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };
 };

 regulators-5 {
  compatible = "qcom,pm8550vs-rpmh-regulators";

  vdd-l1-supply = <&vreg_s1d_0p97>;
  vdd-l2-supply = <&vreg_s7i_1p2>;
  vdd-s2-supply = <&vph_pwr>;
  vdd-s3-supply = <&vph_pwr>;
  vdd-s4-supply = <&vph_pwr>;

  qcom,pmic-id = "j";

  vreg_s2j_1p1: smps2 {
   regulator-name = "vreg_s2j_1p1";
   regulator-min-microvolt = <1000000>;
   regulator-max-microvolt = <1100000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_s3j_1p1: smps3 {
   regulator-name = "vreg_s3j_1p1";
   regulator-min-microvolt = <1000000>;
   regulator-max-microvolt = <1100000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l1j_0p91: ldo1 {
   regulator-name = "vreg_l1j_0p91";
   regulator-min-microvolt = <880000>;
   regulator-max-microvolt = <920000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l2j_1p2: ldo2 {
   regulator-name = "vreg_l2j_1p2";
   regulator-min-microvolt = <1200000>;
   regulator-max-microvolt = <1200000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };
 };

 regulators-6 {
  compatible = "qcom,pm8010-rpmh-regulators";
  qcom,pmic-id = "m";

  vdd-l1-l2-supply = <&vreg_s7i_1p2>;
  vdd-l3-l4-supply = <&vreg_bob2>;
  vdd-l5-supply = <&vreg_s3g_1p8>;
  vdd-l6-supply = <&vreg_bob1>;
  vdd-l7-supply = <&vreg_bob1>;

  vreg_l1m_1p1: ldo1 {
   regulator-name = "vreg_l1m_1p1";
   regulator-min-microvolt = <1104000>;
   regulator-max-microvolt = <1104000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l2m_1p056: ldo2 {
   regulator-name = "vreg_l2m_1p056";
   regulator-min-microvolt = <1056000>;
   regulator-max-microvolt = <1056000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l3m_2p8: ldo3 {
   regulator-name = "vreg_l3m_2p8";
   regulator-min-microvolt = <2800000>;
   regulator-max-microvolt = <2800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l4m_2p8: ldo4 {
   regulator-name = "vreg_l4m_2p8";
   regulator-min-microvolt = <2800000>;
   regulator-max-microvolt = <2800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l5m_1p8: ldo5 {
   regulator-name = "vreg_l5m_1p8";
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l6m_2p8: ldo6 {
   regulator-name = "vreg_l6m_2p8";
   regulator-min-microvolt = <2800000>;
   regulator-max-microvolt = <2800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l7m_2p96: ldo7 {
   regulator-name = "vreg_l7m_2p96";
   regulator-min-microvolt = <2960000>;
   regulator-max-microvolt = <2960000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };
 };

 regulators-7 {
  compatible = "qcom,pm8010-rpmh-regulators";
  qcom,pmic-id = "n";

  vdd-l1-l2-supply = <&vreg_s7i_1p2>;
  vdd-l3-l4-supply = <&vreg_s3g_1p8>;
  vdd-l5-supply = <&vreg_bob2>;
  vdd-l6-supply = <&vreg_bob2>;
  vdd-l7-supply = <&vreg_bob1>;

  vreg_l1n_1p1: ldo1 {
   regulator-name = "vreg_l1n_1p1";
   regulator-min-microvolt = <1104000>;
   regulator-max-microvolt = <1104000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l2n_1p1: ldo2 {
   regulator-name = "vreg_l2n_1p1";
   regulator-min-microvolt = <1104000>;
   regulator-max-microvolt = <1104000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l3n_1p8: ldo3 {
   regulator-name = "vreg_l3n_1p8";
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l4n_1p8: ldo4 {
   regulator-name = "vreg_l4n_1p8";
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l5n_2p8: ldo5 {
   regulator-name = "vreg_l5n_2p8";
   regulator-min-microvolt = <2800000>;
   regulator-max-microvolt = <2800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l6n_2p8: ldo6 {
   regulator-name = "vreg_l6n_2p8";
   regulator-min-microvolt = <2800000>;
   regulator-max-microvolt = <2800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l7n_3p3: ldo7 {
   regulator-name = "vreg_l7n_3p3";
   regulator-min-microvolt = <3304000>;
   regulator-max-microvolt = <3304000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };
 };
};

&lpass_vamacro {
 pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
 pinctrl-names = "default";

 vdd-micb-supply = <&vreg_l1b_1p8>;
 qcom,dmic-sample-rate = <4800000>;
};

&pm8550_flash {
 status = "okay";

 led-0 {
  function = LED_FUNCTION_FLASH;
  color = <LED_COLOR_ID_YELLOW>;
  led-sources = <1>, <4>;
  led-max-microamp = <500000>;
  flash-max-microamp = <2000000>;
  flash-max-timeout-us = <1280000>;
  function-enumerator = <0>;
 };

 led-1 {
  function = LED_FUNCTION_FLASH;
  color = <LED_COLOR_ID_WHITE>;
  led-sources = <2>, <3>;
  led-max-microamp = <500000>;
  flash-max-microamp = <2000000>;
  flash-max-timeout-us = <1280000>;
  function-enumerator = <1>;
 };
};

&pm8550_gpios {
 volume_up_n: volume-up-n-state {
  pins = "gpio6";
  function = "normal";
  bias-pull-up;
  input-enable;
  power-source = <1>;
 };
};

&pm8550_pwm {
 status = "okay";

 multi-led {
  color = <LED_COLOR_ID_RGB>;
  function = LED_FUNCTION_STATUS;

  #address-cells = <1>;
  #size-cells = <0>;

  led@1 {
   reg = <1>;
   color = <LED_COLOR_ID_RED>;
  };

  led@2 {
   reg = <2>;
   color = <LED_COLOR_ID_GREEN>;
  };

  led@3 {
   reg = <3>;
   color = <LED_COLOR_ID_BLUE>;
  };
 };
};

&pon_pwrkey {
 status = "okay";
};

&pon_resin {
 linux,code = <KEY_VOLUMEDOWN>;

 status = "okay";
};

&pmih0108_eusb2_repeater {
 status = "okay";

 vdd18-supply = <&vreg_l15b_1p8>;
 vdd3-supply = <&vreg_l5b_3p1>;
};

&qupv3_1 {
 status = "okay";
};

&remoteproc_adsp {
 firmware-name = "qcom/sm8750/adsp.mbn",
   "qcom/sm8750/adsp_dtb.mbn";

 status = "okay";
};

&remoteproc_cdsp {
 firmware-name = "qcom/sm8750/cdsp.mbn",
   "qcom/sm8750/cdsp_dtb.mbn";

 status = "okay";
};

&remoteproc_mpss {
 firmware-name = "qcom/sm8750/modem.mbn",
   "qcom/sm8750/modem_dtb.mbn";

 /* Modem crashes after some time with "DOG detects stalled initialization" */
 status = "fail";
};

&swr0 {
 status = "okay";

 /* WSA883x, left/front speaker */
 left_spkr: speaker@0,1 {
  compatible = "sdw10217020200";
  reg = <0 1>;
  pinctrl-0 = <&spkr_0_sd_n_active>;
  pinctrl-names = "default";
  powerdown-gpios = <&lpass_tlmm 17 GPIO_ACTIVE_LOW>;
  #sound-dai-cells = <0>;
  sound-name-prefix = "SpkrLeft";
  #thermal-sensor-cells = <0>;
  vdd-supply = <&vreg_l15b_1p8>;
 };

 /* WSA883x, right/back speaker */
 right_spkr: speaker@0,2 {
  compatible = "sdw10217020200";
  reg = <0 2>;
  pinctrl-0 = <&spkr_1_sd_n_active>;
  pinctrl-names = "default";
  powerdown-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>;
  #sound-dai-cells = <0>;
  sound-name-prefix = "SpkrRight";
  #thermal-sensor-cells = <0>;
  vdd-supply = <&vreg_l15b_1p8>;
 };
};

&swr1 {
 status = "okay";

 /* WCD9395 RX */
 wcd_rx: codec@0,4 {
  compatible = "sdw20217010e00";
  reg = <0 4>;

  /*
   * WCD9395 RX Port 1 (HPH_L/R)      <=> SWR1 Port 1 (HPH_L/R)
   * WCD9395 RX Port 2 (CLSH)         <=> SWR1 Port 2 (CLSH)
   * WCD9395 RX Port 3 (COMP_L/R)     <=> SWR1 Port 3 (COMP_L/R)
   * WCD9395 RX Port 4 (LO)           <=> SWR1 Port 4 (LO)
   * WCD9395 RX Port 5 (DSD_L/R)      <=> SWR1 Port 5 (DSD_L/R)
   * WCD9395 RX Port 6 (HIFI_PCM_L/R) <=> SWR1 Port 9 (HIFI_PCM_L/R)
   */
  qcom,rx-port-mapping = <1 2 3 4 5 9>;
 };
};

&swr2 {
 status = "okay";

 /* WCD9395 TX */
 wcd_tx: codec@0,3 {
  compatible = "sdw20217010e00";
  reg = <0 3>;

  /*
   * WCD9395 TX Port 1 (ADC1,2,3,4)         <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3)
   * WCD9395 TX Port 2 (ADC3,4 & DMIC0,1)   <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3)
   * WCD9395 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3 (TX SWR_INPUT 4,5,6,7)
   * WCD9395 TX Port 4 (DMIC4,5,6,7)        <=> SWR2 Port 4 (TX SWR_INPUT 8,9,10,11)
   */
  qcom,tx-port-mapping = <2 2 3 4>;
 };
};

&tlmm {
 /* reserved for secure world */
 gpio-reserved-ranges = <36 4>, <74 1>;
};

&uart7 {
 status = "okay";
};

/* Pinctrl */
&lpass_tlmm {
 spkr_0_sd_n_active: spkr-0-sd-n-active-state {
  pins = "gpio17";
  function = "gpio";
  drive-strength = <16>;
  bias-disable;
  output-low;
 };

 spkr_1_sd_n_active: spkr-1-sd-n-active-state {
  pins = "gpio18";
  function = "gpio";
  drive-strength = <16>;
  bias-disable;
  output-low;
 };
};

&tlmm {
 wcd_default: wcd-reset-n-active-state {
  pins = "gpio101";
  function = "gpio";
  drive-strength = <16>;
  bias-disable;
  output-low;
 };
};

&ufs_mem_phy {
 vdda-phy-supply = <&vreg_l1j_0p91>;
 vdda-pll-supply = <&vreg_l3g_1p2>;

 status = "okay";
};

&ufs_mem_hc {
 reset-gpios = <&tlmm 215 GPIO_ACTIVE_LOW>;

 vcc-supply = <&vreg_l17b_2p5>;
 vcc-max-microamp = <1300000>;
 vccq-supply = <&vreg_l1d_1p2>;
 vccq-max-microamp = <1200000>;

 status = "okay";
};