Anforderungen  |   Konzepte  |   Entwurf  |   Entwicklung  |   Qualitätssicherung  |   Lebenszyklus  |   Steuerung
 
 
 
 


Quelle  r8a779a0-falcon-cpu.dtsi   Sprache: unbekannt

 
// SPDX-License-Identifier: GPL-2.0
/*
 * Device Tree Source for the Falcon CPU board
 *
 * Copyright (C) 2020 Renesas Electronics Corp.
 */

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>

#include "r8a779a0.dtsi"

/ {
 model = "Renesas Falcon CPU board";
 compatible = "renesas,falcon-cpu", "renesas,r8a779a0";

 aliases {
  i2c0 = &i2c0;
  i2c1 = &i2c1;
  i2c2 = &i2c2;
  i2c3 = &i2c3;
  i2c4 = &i2c4;
  i2c5 = &i2c5;
  i2c6 = &i2c6;
  serial0 = &scif0;
 };

 chosen {
  stdout-path = "serial0:115200n8";
 };

 keys {
  compatible = "gpio-keys";

  pinctrl-0 = <&keys_pins>;
  pinctrl-names = "default";

  key-1 {
   gpios = <&gpio6 18 GPIO_ACTIVE_LOW>;
   linux,code = <KEY_1>;
   label = "SW47";
   wakeup-source;
   debounce-interval = <20>;
  };

  key-2 {
   gpios = <&gpio6 19 GPIO_ACTIVE_LOW>;
   linux,code = <KEY_2>;
   label = "SW48";
   wakeup-source;
   debounce-interval = <20>;
  };

  key-3 {
   gpios = <&gpio6 20 GPIO_ACTIVE_LOW>;
   linux,code = <KEY_3>;
   label = "SW49";
   wakeup-source;
   debounce-interval = <20>;
  };
 };

 leds {
  compatible = "gpio-leds";

  led-1 {
   gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>;
   color = <LED_COLOR_ID_GREEN>;
   function = LED_FUNCTION_INDICATOR;
   function-enumerator = <1>;
  };
  led-2 {
   gpios = <&gpio4 19 GPIO_ACTIVE_HIGH>;
   color = <LED_COLOR_ID_GREEN>;
   function = LED_FUNCTION_INDICATOR;
   function-enumerator = <2>;
  };
  led-3 {
   gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>;
   color = <LED_COLOR_ID_GREEN>;
   function = LED_FUNCTION_INDICATOR;
   function-enumerator = <3>;
  };
 };

 memory@48000000 {
  device_type = "memory";
  /* first 128MB is reserved for secure area. */
  reg = <0x0 0x48000000 0x0 0x78000000>;
 };

 memory@500000000 {
  device_type = "memory";
  reg = <0x5 0x00000000 0x0 0x80000000>;
 };

 memory@600000000 {
  device_type = "memory";
  reg = <0x6 0x00000000 0x0 0x80000000>;
 };

 memory@700000000 {
  device_type = "memory";
  reg = <0x7 0x00000000 0x0 0x80000000>;
 };

 mini-dp-con {
  compatible = "dp-connector";
  label = "CN5";
  type = "mini";

  port {
   mini_dp_con_in: endpoint {
    remote-endpoint = <&sn65dsi86_out>;
   };
  };
 };

 reg_1p2v: regulator-1p2v {
  compatible = "regulator-fixed";
  regulator-name = "fixed-1.2V";
  regulator-min-microvolt = <1200000>;
  regulator-max-microvolt = <1200000>;
  regulator-boot-on;
  regulator-always-on;
 };

 reg_1p8v: regulator-1p8v {
  compatible = "regulator-fixed";
  regulator-name = "fixed-1.8V";
  regulator-min-microvolt = <1800000>;
  regulator-max-microvolt = <1800000>;
  regulator-boot-on;
  regulator-always-on;
 };

 reg_3p3v: regulator-3p3v {
  compatible = "regulator-fixed";
  regulator-name = "fixed-3.3V";
  regulator-min-microvolt = <3300000>;
  regulator-max-microvolt = <3300000>;
  regulator-boot-on;
  regulator-always-on;
 };

 sn65dsi86_refclk: clk-x6 {
  compatible = "fixed-clock";
  #clock-cells = <0>;
  clock-frequency = <38400000>;
 };
};

&dsi0 {
 status = "okay";

 ports {
  port@1 {
   dsi0_out: endpoint {
    remote-endpoint = <&sn65dsi86_in>;
    data-lanes = <1 2 3 4>;
   };
  };
 };
};

&du {
 status = "okay";
};

&extal_clk {
 clock-frequency = <16666666>;
};

&extalr_clk {
 clock-frequency = <32768>;
};

&i2c0 {
 pinctrl-0 = <&i2c0_pins>;
 pinctrl-names = "default";

 status = "okay";
 clock-frequency = <400000>;

 eeprom@50 {
  compatible = "rohm,br24g01", "atmel,24c01";
  label = "cpu-board";
  reg = <0x50>;
  pagesize = <8>;
 };
};

&i2c1 {
 pinctrl-0 = <&i2c1_pins>;
 pinctrl-names = "default";

 status = "okay";
 clock-frequency = <400000>;

 bridge@2c {
  pinctrl-0 = <&irq0_pins>;
  pinctrl-names = "default";

  compatible = "ti,sn65dsi86";
  reg = <0x2c>;

  clocks = <&sn65dsi86_refclk>;
  clock-names = "refclk";

  interrupts-extended = <&intc_ex 0 IRQ_TYPE_LEVEL_HIGH>;

  vccio-supply = <®_1p8v>;
  vpll-supply = <®_1p8v>;
  vcca-supply = <®_1p2v>;
  vcc-supply = <®_1p2v>;

  ports {
   #address-cells = <1>;
   #size-cells = <0>;

   port@0 {
    reg = <0>;
    sn65dsi86_in: endpoint {
     remote-endpoint = <&dsi0_out>;
    };
   };

   port@1 {
    reg = <1>;
    sn65dsi86_out: endpoint {
     remote-endpoint = <&mini_dp_con_in>;
    };
   };
  };
 };
};

&i2c6 {
 pinctrl-0 = <&i2c6_pins>;
 pinctrl-names = "default";

 status = "okay";
 clock-frequency = <400000>;
};

&mmc0 {
 pinctrl-0 = <&mmc_pins>;
 pinctrl-1 = <&mmc_pins>;
 pinctrl-names = "default", "state_uhs";

 vmmc-supply = <®_3p3v>;
 vqmmc-supply = <®_1p8v>;
 mmc-hs200-1_8v;
 mmc-hs400-1_8v;
 bus-width = <8>;
 no-sd;
 no-sdio;
 non-removable;
 full-pwr-cycle-in-suspend;
 status = "okay";
};

&pfc {
 pinctrl-0 = <&scif_clk_pins>;
 pinctrl-names = "default";

 i2c0_pins: i2c0 {
  groups = "i2c0";
  function = "i2c0";
 };

 i2c1_pins: i2c1 {
  groups = "i2c1";
  function = "i2c1";
 };

 i2c6_pins: i2c6 {
  groups = "i2c6";
  function = "i2c6";
 };

 irq0_pins: irq0 {
  groups = "intc_ex_irq0";
  function = "intc_ex";
 };

 keys_pins: keys {
  pins = "GP_6_18", "GP_6_19", "GP_6_20";
  bias-pull-up;
 };

 mmc_pins: mmc {
  groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
  function = "mmc";
  power-source = <1800>;
 };

 qspi0_pins: qspi0 {
  groups = "qspi0_ctrl", "qspi0_data4";
  function = "qspi0";
 };

 scif0_pins: scif0 {
  groups = "scif0_data", "scif0_ctrl";
  function = "scif0";
 };

 scif_clk_pins: scif_clk {
  groups = "scif_clk";
  function = "scif_clk";
 };
};

&rpc {
 pinctrl-0 = <&qspi0_pins>;
 pinctrl-names = "default";

 status = "okay";

 flash@0 {
  compatible = "spansion,s25fs512s", "jedec,spi-nor";
  reg = <0>;
  spi-max-frequency = <40000000>;
  spi-rx-bus-width = <4>;

  partitions {
   compatible = "fixed-partitions";
   #address-cells = <1>;
   #size-cells = <1>;

   boot@0 {
    reg = <0x0 0xcc0000>;
    read-only;
   };
   user@cc0000 {
    reg = <0xcc0000 0x3340000>;
   };
  };
 };
};

&rwdt {
 timeout-sec = <60>;
 status = "okay";
};

&scif0 {
 pinctrl-0 = <&scif0_pins>;
 pinctrl-names = "default";
 bootph-all;

 uart-has-rtscts;
 status = "okay";
};

&scif_clk {
 clock-frequency = <24000000>;
};

[ Dauer der Verarbeitung: 0.3 Sekunden  (vorverarbeitet)  ]

                                                                                                                                                                                                                                                                                                                                                                                                     


Neuigkeiten

     Aktuelles
     Motto des Tages

Software

     Produkte
     Quellcodebibliothek

Aktivitäten

     Artikel über Sicherheit
     Anleitung zur Aktivierung von SSL

Muße

     Gedichte
     Musik
     Bilder

Jenseits des Üblichen ....
    

Besucherstatistik

Besucherstatistik

Monitoring

Montastic status badge