Anforderungen  |   Konzepte  |   Entwurf  |   Entwicklung  |   Qualitätssicherung  |   Lebenszyklus  |   Steuerung
 
 
 
 


Quelle  hv-gpci-requests.h   Sprache: C

 
/* SPDX-License-Identifier: GPL-2.0 */

#include "req-gen/_begin.h"

/*
 * Based on the document "getPerfCountInfo v1.07"
 */


/*
 * #define REQUEST_NAME counter_request_name
 * #define REQUEST_NUM r_num
 * #define REQUEST_IDX_KIND starting_index_kind
 * #include I(REQUEST_BEGIN)
 * REQUEST(
 * __field(...)
 * __field(...)
 * __array(...)
 * __count(...)
 * )
 * #include I(REQUEST_END)
 *
 * - starting_index_kind is one of the following, depending on the event:
 *
 *   hw_chip_id: hardware chip id or -1 for current hw chip
 *   partition_id
 *   sibling_part_id,
 *   phys_processor_idx:
 *   0xffffffffffffffff: or -1, which means it is irrelavant for the event
 *
 * __count(offset, bytes, name):
 * a counter that should be exposed via perf
 * __field(offset, bytes, name)
 * a normal field
 * __array(offset, bytes, name)
 * an array of bytes
 *
 *
 * @bytes for __count, and __field _must_ be a numeral token
 * in decimal, not an expression and not in hex.
 *
 *
 * TODO:
 * - expose secondary index (if any counter ever uses it, only 0xA0
 *   appears to use it right now, and it doesn't have any counters)
 * - embed versioning info
 * - include counter descriptions
 */

#define REQUEST_NAME dispatch_timebase_by_processor
#define REQUEST_NUM 0x10
#define REQUEST_IDX_KIND "phys_processor_idx=?"
#include I(REQUEST_BEGIN)
REQUEST(__count(0, 8, processor_time_in_timebase_cycles)
 __field(0x8, 4, hw_processor_id)
 __field(0xC, 2, owning_part_id)
 __field(0xE, 1, processor_state)
 __field(0xF, 1, version)
 __field(0x10, 4, hw_chip_id)
 __field(0x14, 4, phys_module_id)
 __field(0x18, 4, primary_affinity_domain_idx)
 __field(0x1C, 4, secondary_affinity_domain_idx)
 __field(0x20, 4, processor_version)
 __field(0x24, 2, logical_processor_idx)
 __field(0x26, 2, reserved)
 __field(0x28, 4, processor_id_register)
 __field(0x2C, 4, phys_processor_idx)
)
#include I(REQUEST_END)

#define REQUEST_NAME entitled_capped_uncapped_donated_idle_timebase_by_partition
#define REQUEST_NUM 0x20
#define REQUEST_IDX_KIND "sibling_part_id=?"
#include I(REQUEST_BEGIN)
REQUEST(__field(0, 8, partition_id)
 __count(0x8, 8, entitled_cycles)
 __count(0x10, 8, consumed_capped_cycles)
 __count(0x18, 8, consumed_uncapped_cycles)
 __count(0x20, 8, cycles_donated)
 __count(0x28, 8, purr_idle_cycles)
)
#include I(REQUEST_END)

#ifdef ENABLE_EVENTS_COUNTERINFO_V6
/*
 * Not available for counter_info_version >= 0x8, use
 * run_instruction_cycles_by_partition(0x100) instead.
 */

#define REQUEST_NAME run_instructions_run_cycles_by_partition
#define REQUEST_NUM 0x30
#define REQUEST_IDX_KIND "sibling_part_id=?"
#include I(REQUEST_BEGIN)
REQUEST(__field(0, 8, partition_id)
 __count(0x8, 8, instructions_completed)
 __count(0x10, 8, cycles)
)
#include I(REQUEST_END)
#endif

#define REQUEST_NAME system_performance_capabilities
#define REQUEST_NUM 0x40
#define REQUEST_IDX_KIND "starting_index=0xffffffff"
#include I(REQUEST_BEGIN)
REQUEST(__field(0, 1, perf_collect_privileged)
 __field(0x1, 1, capability_mask)
 __array(0x2, 0xE, reserved)
)
#include I(REQUEST_END)

#ifdef ENABLE_EVENTS_COUNTERINFO_V6
#define REQUEST_NAME processor_bus_utilization_abc_links
#define REQUEST_NUM 0x50
#define REQUEST_IDX_KIND "hw_chip_id=?"
#include I(REQUEST_BEGIN)
REQUEST(__field(0, 4, hw_chip_id)
 __array(0x4, 0xC, reserved1)
 __count(0x10, 8, total_link_cycles)
 __count(0x18, 8, idle_cycles_for_a_link)
 __count(0x20, 8, idle_cycles_for_b_link)
 __count(0x28, 8, idle_cycles_for_c_link)
 __array(0x30, 0x20, reserved2)
)
#include I(REQUEST_END)

#define REQUEST_NAME processor_bus_utilization_wxyz_links
#define REQUEST_NUM 0x60
#define REQUEST_IDX_KIND "hw_chip_id=?"
#include I(REQUEST_BEGIN)
REQUEST(__field(0, 4, hw_chip_id)
 __array(0x4, 0xC, reserved1)
 __count(0x10, 8, total_link_cycles)
 __count(0x18, 8, idle_cycles_for_w_link)
 __count(0x20, 8, idle_cycles_for_x_link)
 __count(0x28, 8, idle_cycles_for_y_link)
 __count(0x30, 8, idle_cycles_for_z_link)
 __array(0x38, 0x28, reserved2)
)
#include I(REQUEST_END)

#define REQUEST_NAME processor_bus_utilization_gx_links
#define REQUEST_NUM 0x70
#define REQUEST_IDX_KIND "hw_chip_id=?"
#include I(REQUEST_BEGIN)
REQUEST(__field(0, 4, hw_chip_id)
 __array(0x4, 0xC, reserved1)
 __count(0x10, 8, gx0_in_address_cycles)
 __count(0x18, 8, gx0_in_data_cycles)
 __count(0x20, 8, gx0_in_retries)
 __count(0x28, 8, gx0_in_bus_cycles)
 __count(0x30, 8, gx0_in_cycles_total)
 __count(0x38, 8, gx0_out_address_cycles)
 __count(0x40, 8, gx0_out_data_cycles)
 __count(0x48, 8, gx0_out_retries)
 __count(0x50, 8, gx0_out_bus_cycles)
 __count(0x58, 8, gx0_out_cycles_total)
 __count(0x60, 8, gx1_in_address_cycles)
 __count(0x68, 8, gx1_in_data_cycles)
 __count(0x70, 8, gx1_in_retries)
 __count(0x78, 8, gx1_in_bus_cycles)
 __count(0x80, 8, gx1_in_cycles_total)
 __count(0x88, 8, gx1_out_address_cycles)
 __count(0x90, 8, gx1_out_data_cycles)
 __count(0x98, 8, gx1_out_retries)
 __count(0xA0, 8, gx1_out_bus_cycles)
 __count(0xA8, 8, gx1_out_cycles_total)
)
#include I(REQUEST_END)

#define REQUEST_NAME processor_bus_utilization_mc_links
#define REQUEST_NUM 0x80
#define REQUEST_IDX_KIND "hw_chip_id=?"
#include I(REQUEST_BEGIN)
REQUEST(__field(0, 4, hw_chip_id)
 __array(0x4, 0xC, reserved1)
 __count(0x10, 8, mc0_frames)
 __count(0x18, 8, mc0_reads)
 __count(0x20, 8, mc0_write)
 __count(0x28, 8, mc0_total_cycles)
 __count(0x30, 8, mc1_frames)
 __count(0x38, 8, mc1_reads)
 __count(0x40, 8, mc1_writes)
 __count(0x48, 8, mc1_total_cycles)
)
#include I(REQUEST_END)

/* Processor_config (0x90) skipped, no counters */
/* Current_processor_frequency (0x91) skipped, no counters */

#define REQUEST_NAME processor_core_utilization
#define REQUEST_NUM 0x94
#define REQUEST_IDX_KIND "phys_processor_idx=?"
#include I(REQUEST_BEGIN)
REQUEST(__field(0, 4, phys_processor_idx)
 __field(0x4, 4, hw_processor_id)
 __count(0x8, 8, cycles_across_any_thread)
 __count(0x10, 8, timebase_at_collection)
 __count(0x18, 8, purr_cycles)
 __count(0x20, 8, sum_of_cycles_across_all_threads)
 __count(0x28, 8, instructions_completed)
)
#include I(REQUEST_END)
#endif

/* Processor_core_power_mode (0x95) skipped, no counters */
/* Affinity_domain_information_by_virtual_processor (0xA0) skipped,
 * no counters */

/* Affinity_domain_information_by_domain (0xB0) skipped, no counters */
/* Affinity_domain_information_by_partition (0xB1) skipped, no counters */
/* Physical_memory_info (0xC0) skipped, no counters */
/* Processor_bus_topology (0xD0) skipped, no counters */

#define REQUEST_NAME partition_hypervisor_queuing_times
#define REQUEST_NUM 0xE0
#define REQUEST_IDX_KIND "partition_id=?"
#include I(REQUEST_BEGIN)
REQUEST(__field(0, 2, partition_id)
 __array(0x2, 6, reserved1)
 __count(0x8, 8, time_waiting_for_entitlement)
 __count(0x10, 8, times_waited_for_entitlement)
 __count(0x18, 8, time_waiting_for_phys_processor)
 __count(0x20, 8, times_waited_for_phys_processor)
 __count(0x28, 8, dispatches_on_home_core)
 __count(0x30, 8, dispatches_on_home_primary_affinity_domain)
 __count(0x38, 8, dispatches_on_home_secondary_affinity_domain)
 __count(0x40, 8, dispatches_off_home_secondary_affinity_domain)
 __count(0x48, 8, dispatches_on_dedicated_processor_donating_cycles)
)
#include I(REQUEST_END)

#define REQUEST_NAME system_hypervisor_times
#define REQUEST_NUM 0xF0
#define REQUEST_IDX_KIND "starting_index=0xffffffff"
#include I(REQUEST_BEGIN)
REQUEST(__count(0, 8, time_spent_to_dispatch_virtual_processors)
 __count(0x8, 8, time_spent_processing_virtual_processor_timers)
 __count(0x10, 8, time_spent_managing_partitions_over_entitlement)
 __count(0x18, 8, time_spent_on_system_management)
)
#include I(REQUEST_END)

#define REQUEST_NAME system_tlbie_count_and_time
#define REQUEST_NUM 0xF4
#define REQUEST_IDX_KIND "starting_index=0xffffffff"
#include I(REQUEST_BEGIN)
REQUEST(__count(0, 8, tlbie_instructions_issued)
 /*
 * FIXME: The spec says the offset here is 0x10, which I suspect
 *   is wrong.
 */

 __count(0x8, 8, time_spent_issuing_tlbies)
)
#include I(REQUEST_END)

#define REQUEST_NAME partition_instruction_count_and_time
#define REQUEST_NUM 0x100
#define REQUEST_IDX_KIND "partition_id=?"
#include I(REQUEST_BEGIN)
REQUEST(__field(0, 2, partition_id)
 __array(0x2, 0x6, reserved1)
 __count(0x8, 8, instructions_performed)
 __count(0x10, 8, time_collected)
)
#include I(REQUEST_END)

/* set_mmcrh (0x80001000) skipped, no counters */
/* retrieve_hpmcx (0x80002000) skipped, no counters */

#include "req-gen/_end.h"

¤ Dauer der Verarbeitung: 0.10 Sekunden  (vorverarbeitet)  ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.






                                                                                                                                                                                                                                                                                                                                                                                                     


Neuigkeiten

     Aktuelles
     Motto des Tages

Software

     Produkte
     Quellcodebibliothek

Aktivitäten

     Artikel über Sicherheit
     Anleitung zur Aktivierung von SSL

Muße

     Gedichte
     Musik
     Bilder

Jenseits des Üblichen ....

Besucherstatistik

Besucherstatistik

Monitoring

Montastic status badge