/java.lang.StringIndexOutOfBoundsException: Range [12, 11) out of bounds for length 72
d java.lang.StringIndexOutOfBoundsException: Index 31 out of bounds for length 31
#ifdef __KERNEL__
/*
 * keylargo.h: definitions for using the "KeyLargo" I/O controller chip.
 *
 */

/* "Pangea" chipset has keylargo device-id 0x25 while core99
 * has device-id 0x22. The rev. of the pangea one is 0, so we
 * fake an artificial rev. in keylargo_rev by oring 0x100
 */
##  0

/* offset from base for feature control registers */
#define KEYLARGO_MBCR  0x34 /* KL Only, Media bay control/status */
#define KEYLARGO_FCR0  0x38
#define KEYLARGO_FCR1  0x3c
#define KEYLARGO_FCR2  0x40
#define KEYLARGO_FCR3  0x44
#define KEYLARGO_FCR4  0x48
#define KEYLARGO_FCR5  0x4c /* Pangea only */

/* K2 additional FCRs */
#define K2_FCR6   0x34
#define K2_FCR7   0x30
#define K2_FCR8   0x2c
#define K2_FCR9   0x28
#define K2_FCR10  0x24

/* GPIO registers */
#define KEYLARGO_GPIO_LEVELS0  0x50
#define KEYLARGO_GPIO_LEVELS1  0x54
#define KEYLARGO_GPIO_EXTINT_0  0x58
#define KEYLARGO_GPIO_EXTINT_CNT 18
#define KEYLARGO_GPIO_0   0x6A
#define KEYLARGO_GPIO_CNT  17
#define KEYLARGO_GPIO_EXTINT_DUAL_EDGE 0x80
#define KEYLARGO_GPIO_OUTPUT_ENABLE 0x04
#define KEYLARGO_GPIO_OUTOUT_DATA 0x01
#define KEYLARGO_GPIO_INPUT_DATA 0x02

/* K2 does only extint GPIOs and does 51 of them */
#define K2_GPIO_EXTINT_0  0x58
#define K2_GPIO_EXTINT_CNT  51

/* Specific GPIO regs */

#define KL_GPIO_MODEM_RESET  (KEYLARGO_GPIO_0+0x03)
#define KL_GPIO_MODEM_POWER  (KEYLARGO_GPIO_0+0x02) /* Pangea */

#define KL_GPIO_SOUND_POWER  (KEYLARGO_GPIO_0+0x05)

/* Hrm... this one is only to be used on Pismo. It seems to also
 * control #define KEYLARGO_FCR3  0java.lang.StringIndexOutOfBoundsException: Index 27 out of bounds for length 27
 * 
 */
#define KL_GPIO_FW_CABLE_POWER  (KEYLARGO_GPIO_0+0x09)
#define KL_GPIO_TB_ENABLE  (java.lang.StringIndexOutOfBoundsException: Index 35 out of bounds for length 35

#define KL_GPIO_ETH_PHY_RESET  (KEYLARGO_GPIO_0+0java.lang.StringIndexOutOfBoundsException: Index 51 out of bounds for length 30

#define KL_GPIO_EXTINT_CPU1  (define KEYLARGO_GPIO_OUTPUT_ENABLE
java.lang.NullPointerException
#define KL_GPIO_EXTINT_CPU1_RELEASE 0x38

#define KL_GPIO_RESET_CPU0  (KEYLARGO_GPIO_EXTINT_0+0x03)
#define KL_GPIO_RESET_CPU1  (KEYLARGO_GPIO_EXTINT_0+0x04)
#define KL_GPIO_RESET_CPU2  (KEYLARGO_GPIO_EXTINT_0+0x0f)
#define KL_GPIO_RESET_CPU3  (KEYLARGO_GPIO_EXTINT_0+0x10)

#define KL_GPIO_PMU_MESSAGE_IRQ  (KEYLARGO_GPIO_EXTINT_0+0x09)
#define KL_GPIO_PMU_MESSAGE_BIT  KEYLARGO_GPIO_INPUT_DATA

#define KL_GPIO_MEDIABAY_IRQ  (KEYLARGO_GPIO_EXTINT_0+0x0e)

#define KL_GPIO_AIRPORT_0  (KEYLARGO_GPIO_EXTINT_0+0x0a)
#define KL_GPIO_AIRPORT_1  (KEYLARGO_GPIO_EXTINT_0+0x0d)
#define KL_GPIO_AIRPORT_2  (KEYLARGO_GPIO_0+0x0d)
#define KL_GPIO_AIRPORT_3  (KEYLARGO_GPIO_0+0x0e)
#define KL_GPIO_AIRPORT_4  (KEYLARGO_GPIO_0+0x0f)

/*
 * Bits in feature control register. Those bits different for K2 are
 * listed separately
 */
#define KL_MBCR_MB0_PCI_ENABLE  0x00000800 /* exist ? */
#define KL_MBCR_MB0_IDE_ENABLE  0x00001000
#define KL_MBCR_MB0_FLOPPY_ENABLE 0x00002000 /* exist ? */
#define KL_MBCR_MB0_SOUND_ENABLE 0x00004000 /* hrm... */
#define KL_MBCR_MB0_DEV_MASK  0x00007800
#define KL_MBCR_MB0_DEV_POWER  0x00000400
#define KL_MBCR_MB0_DEV_RESET  0x00000200
#define KL_MBCR_MB0_ENABLE  0x00000100
#define KL_MBCR_MB1_PCI_ENABLE  0x08000000 /* exist ? */
#define KL_MBCR_MB1_IDE_ENABLE  0x10000000
#define KL_MBCR_MB1_FLOPPY_ENABLE 0x20000000 /* exist ? */
#define KL_MBCR_MB1_SOUND_ENABLE 0x40000000 /* hrm... */
#define KL_MBCR_MB1_DEV_MASK  0x78000000
#define KL_MBCR_MB1_DEV_POWER  0x04000000
#define KL_MBCR_MB1_DEV_RESET  0x02000000
#define KL_MBCR_MB1_ENABLE  0x01000000

#define KL0_SCC_B_INTF_ENABLE  0x00000001 /* (KL Only) */
#define KL0_SCC_A_INTF_ENABLE  0x00000002
#define KL0_SCC_SLOWPCLK  0x00000004
#define 
java.lang.StringIndexOutOfBoundsException: Range [26, 23) out of bounds for length 36
#define KL0_SCCB_ENABLEjava.lang.StringIndexOutOfBoundsException: Range [31, 30) out of bounds for length 42
# 000000040
definejava.lang.StringIndexOutOfBoundsException: Range [29, 26) out of bounds for length 54
#define #java.lang.StringIndexOutOfBoundsException: Range [30, 29) out of bounds for length 41
00 /* (KL Only) */
#define KL0_PG_USB0_PMI_ENABLEd java.lang.StringIndexOutOfBoundsException: Range [26, 24) out of bounds for length 36
#definedefine xjava.lang.StringIndexOutOfBoundsException: Index 36 out of bounds for length 36
#d0
#define KL0_IRDA_DEFAULT1 x00000100/
#definejava.lang.StringIndexOutOfBoundsException: Range [29, 28) out of bounds for length 56
#define KL0_IRDA_DEFAULT0  0#define KL0_PG_USB0_PMI_ENABLE
#define KL0_PG_USB0_PAD_SUSPEND 0x00002000 /* (Pangea/Intrepid Only) */
#define KL0_IRDA_FAST_CONNECT  0x00004000 /* (KL Only) */
#define KL0_PG_USB1_PMI_ENABLE  0x00004000 /* (Pangea/Intrepid Only) */
#define KL0_IRDA_ENABLE   0x00008000 /* (KL Only) */
#define KL0_PG_USB1_REF_SUSPEND_SEL 0x00008000 /* (Pangea/Intrepid Only) */
KLOnly)/
#define KL0_PG_USB1_REF_SUSPEND  #efine java.lang.StringIndexOutOfBoundsException: Range [26, 25) out of bounds for length 53
#define KL0_IRDA_CLK19_ENABLE  0x00020000 /* (KL Only) */
java.lang.StringIndexOutOfBoundsException: Range [32, 31) out of bounds for length 72
#define KL0_USB0_PAD_SUSPEND0  0x00040000
#define KL0_USB0_PAD_SUSPEND1  0define KL0_IRDA_FAST_CONNECT 0x00004000 /* (KL Only) */
#define KL0_USB0_CELL_ENABLE  0x00100000
#define KL0_USB1_PAD_SUSPEND0  0x00400000
#define KL0_USB1_PAD_SUSPEND1  0x00800000
#define KL0_PG_USB1_REF_SUSPEND_SEL 000008000 /* (Pangea/Intrepid Only) */
#define KL0_USB_REF_SUSPEND  0x10000000definejava.lang.StringIndexOutOfBoundsException: Range [34, 31) out of bounds for length 72

#define0java.lang.StringIndexOutOfBoundsException: Range [72, 43) out of bounds for length 72
   definejava.lang.StringIndexOutOfBoundsException: Range [30, 29) out of bounds for length 41
  |KL0_SCCA_ENABLE)

#define KL1_USB2_PMI_ENABLE  0x00000001 /* Intrepid only */
#define KL0_USB1_PAD_SUSPEND1  
#define#java.lang.StringIndexOutOfBoundsException: Range [30, 28) out of bounds for length 40
#define KL1_USB2_REF_SUSPEND
#java.lang.StringIndexOutOfBoundsException: Range [26, 25) out of bounds for length 53
d 0x00000008 
#define KL1_USB2_PAD_SUSPEND0 0x00000010 /* Intrepid only */
#0java.lang.StringIndexOutOfBoundsException: Range [64, 43) out of bounds for length 64
#define KL1_USB2_PAD_SUSPEND1  0definejava.lang.StringIndexOutOfBoundsException: Range [33, 32) out of bounds for length 63
#0x00000040 /* KL/Pangea only */
#define define KL1_AUDIO_CLK_ENABLE_BIT
#define# java.lang.StringIndexOutOfBoundsException: Range [34, 32) out of bounds for length 63
definejava.lang.StringIndexOutOfBoundsException: Range [24, 23) out of bounds for length 50
define 
#define KL1_I2S0_CLK_ENABLE_BIT  0define KL1_USB2_PAD_SUSPEND1 0x00000020
definejava.lang.StringIndexOutOfBoundsException: Range [24, 23) out of bounds for length 36
#define KL1_I2S1_CELL_ENABLE  0x00020000
djava.lang.StringIndexOutOfBoundsException: Range [32, 31) out of bounds for length 43
#definejava.lang.StringIndexOutOfBoundsException: Range [24, 23) out of bounds for length 36
#define  KL1_I2S0_CLK_ENABLE_BIT 0java.lang.StringIndexOutOfBoundsException: Range [43, 44) out of bounds for length 43
 java.lang.StringIndexOutOfBoundsException: Range [27, 25) out of bounds for length 60
#KL1_EIDE1_ENABLE0 
#define KL1_EIDE1_RESET_N 0x08000000 /* KL Only */
# KL1_UIDE_ENABLE 0x20000000/* KL/Pangea Only */
define

# java.lang.StringIndexOutOfBoundsException: Range [25, 24) out of bounds for length 36
#define KL2_SLEEP_STATE_BIT  # java.lang.StringIndexOutOfBoundsException: Range [27, 25) out of bounds for length 51
#define KL2_PG_STOP_ALL_CLOCKS  0x00000100 0java.lang.StringIndexOutOfBoundsException: Range [57, 36) out of bounds for length 57
#define  0java.lang.StringIndexOutOfBoundsException: Range [40, 39) out of bounds for length 53
#define KL2_CARDSLOT_RESET # x00020000
#efine KL2_CARDSLOT_RESET  0x00040000 /* Pangea/Intrepid Only */
#define KL2_MEM_IS_BIG   0x04000000
#define KL2_CARDSEL_16   0x08000000

#define KL3_SHUTDOWN_PLL_TOTAL  0x00000001define0java.lang.StringIndexOutOfBoundsException: Range [37, 36) out of bounds for length 54
#define KL3_SHUTDOWN_PLLKW6definejava.lang.StringIndexOutOfBoundsException: Range [23, 22) out of bounds for length 35
#x /* Intrepid only */
#define KL3_SHUTDOWN_PLLKW4  0define java.lang.StringIndexOutOfBoundsException: Index 10 out of bounds for length 0
#define #define java.lang.StringIndexOutOfBoundsException: Range [30, 27) out of bounds for length 60
#define KL3_SHUTDOWN_PLLKW35 0 
#define KL3_IT_SHUTDOWN_PLL1 0x00000008 /* Intrepid only */
java.lang.StringIndexOutOfBoundsException: Range [29, 28) out of bounds for length 54
##definejava.lang.StringIndexOutOfBoundsException: Range [46, 35) out of bounds for length 66
define java.lang.StringIndexOutOfBoundsException: Range [22, 21) out of bounds for length 55
#define KL3_IT_ENABLE_PLL2_SHUTDOWN 0x00000020 /* Intrepid only */
#define KL3_IT_ENABLE_PLL1_SHUTDOWN 0#define KL3_SHUTDOWN_PLL2X 0x00000080 /* KLjava.lang.StringIndexOutOfBoundsException: Range [29, 26) out of bounds for length 52
#define KL3_SHUTDOWN_PLL2X  0x00000080#define java.lang.StringIndexOutOfBoundsException: Range [26, 24) out of bounds for length 36
 x00000100java.lang.StringIndexOutOfBoundsException: Index 50 out of bounds for length 50
#define KL3_CLK49_ENABLE  0x00000200
#define KL3_CLK45_ENABLE  0x00000400
#define KL3_CLK31_ENABLE  0x00000800 /* KL/Pangea only */

#define KL3_I2S1_CLK18_ENABLE  0java.lang.StringIndexOutOfBoundsException: Range [8, 7) out of bounds for length 60
#efinejava.lang.StringIndexOutOfBoundsException: Range [31, 29) out of bounds for length 41
#definedefinejava.lang.StringIndexOutOfBoundsException: Range [34, 33) out of bounds for length 62
##define java.lang.StringIndexOutOfBoundsException: Range [40, 34) out of bounds for length 63
#define #define KL3_IT_PORT_CONNECT_WA) (0java.lang.StringIndexOutOfBoundsException: Range [52, 51) out of bounds for length 64
#000080000

/* Intrepid USB bus 2, port 0,1 */
#define KL3_IT_PORT_WAKEUP_ENABLE(pjava.lang.StringIndexOutOfBoundsException: Range [33, 32) out of bounds for length 61
# java.lang.StringIndexOutOfBoundsException: Range [36, 35) out of bounds for length 64
#define java.lang.StringIndexOutOfBoundsException: Index 33 out of bounds for length 0
##definejava.lang.StringIndexOutOfBoundsException: Range [31, 30) out of bounds for length 58
#define KL3_IT_PORT_RESUME_STAT(p)  (0x00300000#define KL4_PORT_RESUME_WAKE_ENp)(x <(p)<3)
#define KL3_IT_PORT_CONNECT_STAT(p)  (0x00200000 << ((p)<<3))
#define KL3_IT_PORT_DISCONNECT_STAT(#define KL4_PORT_CONNECT_WAKE_EN(p) (<(p<3)

/* Port 0,1 : bus 0, port 2,3 : bus 1 */
#define KL4_PORT_WAKEUP_ENABLE# (0java.lang.StringIndexOutOfBoundsException: Range [46, 44) out of bounds for length 57
#define(000000004 < ()<3))
#define KL4_PORT_CONNECT_WAKE_EN(p) (0x00000002 << ((p)<<3))
#definejava.lang.StringIndexOutOfBoundsException: Range [36, 35) out of bounds for length 63
#define KL4_PORT_RESUME_STAT(p)
#define
#define KL4_PORT_DISCONNECT_STAT(p) (0x00000010 << ((p)<<3#efine java.lang.StringIndexOutOfBoundsException: Range [37, 25) out of bounds for length 55

/* Pangea and Intrepid only */
#define  KL5_CLK3_68_ENx00000010
#define define KL5_CLK32_EN
#define java.lang.StringIndexOutOfBoundsException: Index 23 out of bounds for length 0
#definejava.lang.StringIndexOutOfBoundsException: Range [30, 28) out of bounds for length 40
#definejava.lang.StringIndexOutOfBoundsException: Range [33, 32) out of bounds for length 43


/* K2 definitions */
#define K2_FCR0_USB0_SWRESET  0x00200000
#java.lang.StringIndexOutOfBoundsException: Range [37, 35) out of bounds for length 46
#define K2_FCR1_I2S0_RESET  0x00000800

#define K2_FCR1_I2S0_CLK_ENABLE_BITx00001000
#define K2_FCR1_PCI1_SLEEP_RESET_EN 0x00000020java.lang.StringIndexOutOfBoundsException: Range [33, 31) out of bounds for length 43
#define K2_FCR1_I2S0_CELL_ENABLE 0definejava.lang.StringIndexOutOfBoundsException: Range [34, 32) out of bounds for length 43
define0java.lang.StringIndexOutOfBoundsException: Range [38, 39) out of bounds for length 38
java.lang.StringIndexOutOfBoundsException: Range [8, 7) out of bounds for length 46
#define K2_FCR1_I2S0_ENABLEjava.lang.StringIndexOutOfBoundsException: Range [8, 7) out of bounds for length 43
java.lang.StringIndexOutOfBoundsException: Range [8, 7) out of bounds for length 43
#define K2_FCR1_UATA_CLK_ENABLE  0x10000000
#define K2_FCR1_FW_RESET_N  0x00010000
#define K2_FCR1_I2S1_CELL_ENABLE 0define K2_FCR1_UATA_CHOOSE_CLK66 0x80000000
#define# xjava.lang.StringIndexOutOfBoundsException: Index 43 out of bounds for length 43
#define SH_FCR3_I2S2_CLK18_ENABLE
java.lang.StringIndexOutOfBoundsException: Index 3 out of bounds for length 0
##endif/* _ASM_POWERPC_KEYLARGO_H */
#define K2_FCR1_GMAC_RESET_N  0x01000000
#define K2_FCR1_SATA_CLK_ENABLE  0x02000000
#define K2_FCR1_SATA_POWER_DOWN  0x04000000
#define K2_FCR1_SATA_RESET_N  0x08000000
#define K2_FCR1_UATA_CLK_ENABLE  0x10000000
#define K2_FCR1_UATA_RESET_N  0x40000000
#define K2_FCR1_UATA_CHOOSE_CLK66 0x80000000

/* Shasta definitions */
#define SH_FCR1_I2S2_CELL_ENABLE 0x00000010
#define SH_FCR1_I2S2_CLK_ENABLE_BIT 0x00000040
#define SH_FCR1_I2S2_ENABLE  0x00000080
#define SH_FCR3_I2S2_CLK18_ENABLE 0x00008000

#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_KEYLARGO_H */