Anforderungen  |   Konzepte  |   Entwurf  |   Entwicklung  |   Qualitätssicherung  |   Lebenszyklus  |   Steuerung
 
 
 
 


Quelle  lpasscc-sc7280.c   Sprache: C

 
// SPDX-License-Identifier: GPL-2.0
/*
 * Copyright (c) 2021, The Linux Foundation. All rights reserved.
 */


#include <linux/clk-provider.h>
#include <linux/platform_device.h>
#include <linux/pm_clock.h>
#include <linux/pm_runtime.h>
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/regmap.h>

#include <dt-bindings/clock/qcom,lpass-sc7280.h>

#include "clk-regmap.h"
#include "clk-branch.h"
#include "common.h"

static struct clk_branch lpass_top_cc_lpi_q6_axim_hs_clk = {
 .halt_reg = 0x0,
 .halt_check = BRANCH_HALT,
 .clkr = {
  .enable_reg = 0x0,
  .enable_mask = BIT(0),
  .hw.init = &(struct clk_init_data){
   .name = "lpass_top_cc_lpi_q6_axim_hs_clk",
   .ops = &clk_branch2_ops,
  },
 },
};

static struct clk_branch lpass_qdsp6ss_core_clk = {
 .halt_reg = 0x20,
 /* CLK_OFF would not toggle until LPASS is out of reset */
 .halt_check = BRANCH_HALT_SKIP,
 .clkr = {
  .enable_reg = 0x20,
  .enable_mask = BIT(0),
  .hw.init = &(struct clk_init_data){
   .name = "lpass_qdsp6ss_core_clk",
   .ops = &clk_branch2_ops,
  },
 },
};

static struct clk_branch lpass_qdsp6ss_xo_clk = {
 .halt_reg = 0x38,
 /* CLK_OFF would not toggle until LPASS is out of reset */
 .halt_check = BRANCH_HALT_SKIP,
 .clkr = {
  .enable_reg = 0x38,
  .enable_mask = BIT(0),
  .hw.init = &(struct clk_init_data){
   .name = "lpass_qdsp6ss_xo_clk",
   .ops = &clk_branch2_ops,
  },
 },
};

static struct clk_branch lpass_qdsp6ss_sleep_clk = {
 .halt_reg = 0x3c,
 /* CLK_OFF would not toggle until LPASS is out of reset */
 .halt_check = BRANCH_HALT_SKIP,
 .clkr = {
  .enable_reg = 0x3c,
  .enable_mask = BIT(0),
  .hw.init = &(struct clk_init_data){
   .name = "lpass_qdsp6ss_sleep_clk",
   .ops = &clk_branch2_ops,
  },
 },
};

static struct regmap_config lpass_regmap_config = {
 .reg_bits = 32,
 .reg_stride = 4,
 .val_bits = 32,
 .fast_io = true,
};

static struct clk_regmap *lpass_cc_top_sc7280_clocks[] = {
 [LPASS_TOP_CC_LPI_Q6_AXIM_HS_CLK] =
    &lpass_top_cc_lpi_q6_axim_hs_clk.clkr,
};

static const struct qcom_cc_desc lpass_cc_top_sc7280_desc = {
 .config = &lpass_regmap_config,
 .clks = lpass_cc_top_sc7280_clocks,
 .num_clks = ARRAY_SIZE(lpass_cc_top_sc7280_clocks),
};

static struct clk_regmap *lpass_qdsp6ss_sc7280_clocks[] = {
 [LPASS_QDSP6SS_XO_CLK] = &lpass_qdsp6ss_xo_clk.clkr,
 [LPASS_QDSP6SS_SLEEP_CLK] = &lpass_qdsp6ss_sleep_clk.clkr,
 [LPASS_QDSP6SS_CORE_CLK] = &lpass_qdsp6ss_core_clk.clkr,
};

static const struct qcom_cc_desc lpass_qdsp6ss_sc7280_desc = {
 .config = &lpass_regmap_config,
 .clks = lpass_qdsp6ss_sc7280_clocks,
 .num_clks = ARRAY_SIZE(lpass_qdsp6ss_sc7280_clocks),
};

static int lpass_cc_sc7280_probe(struct platform_device *pdev)
{
 const struct qcom_cc_desc *desc;
 int ret;

 ret = devm_pm_runtime_enable(&pdev->dev);
 if (ret)
  return ret;

 ret = pm_clk_create(&pdev->dev);
 if (ret)
  return ret;

 ret = pm_clk_add(&pdev->dev, "iface");
 if (ret < 0) {
  dev_err(&pdev->dev, "failed to acquire iface clock\n");
  goto err_destroy_pm_clk;
 }

 ret = pm_runtime_resume_and_get(&pdev->dev);
 if (ret)
  goto err_destroy_pm_clk;

 if (!of_property_read_bool(pdev->dev.of_node, "qcom,adsp-pil-mode")) {
  lpass_regmap_config.name = "qdsp6ss";
  lpass_regmap_config.max_register = 0x3f;
  desc = &lpass_qdsp6ss_sc7280_desc;

  ret = qcom_cc_probe_by_index(pdev, 0, desc);
  if (ret)
   goto err_put_rpm;
 }

 lpass_regmap_config.name = "top_cc";
 lpass_regmap_config.max_register = 0x4;
 desc = &lpass_cc_top_sc7280_desc;

 ret = qcom_cc_probe_by_index(pdev, 1, desc);
 if (ret)
  goto err_put_rpm;

 pm_runtime_put(&pdev->dev);

 return 0;

err_put_rpm:
 pm_runtime_put_sync(&pdev->dev);
err_destroy_pm_clk:
 pm_clk_destroy(&pdev->dev);

 return ret;
}

static const struct of_device_id lpass_cc_sc7280_match_table[] = {
 { .compatible = "qcom,sc7280-lpasscc" },
 { }
};
MODULE_DEVICE_TABLE(of, lpass_cc_sc7280_match_table);

static struct platform_driver lpass_cc_sc7280_driver = {
 .probe  = lpass_cc_sc7280_probe,
 .driver  = {
  .name = "sc7280-lpasscc",
  .of_match_table = lpass_cc_sc7280_match_table,
 },
};

static int __init lpass_cc_sc7280_init(void)
{
 return platform_driver_register(&lpass_cc_sc7280_driver);
}
subsys_initcall(lpass_cc_sc7280_init);

static void __exit lpass_cc_sc7280_exit(void)
{
 platform_driver_unregister(&lpass_cc_sc7280_driver);
}
module_exit(lpass_cc_sc7280_exit);

MODULE_DESCRIPTION("QTI LPASS_CC SC7280 Driver");
MODULE_LICENSE("GPL v2");

Messung V0.5
C=95 H=90 G=92

¤ Dauer der Verarbeitung: 0.10 Sekunden  (vorverarbeitet)  ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.






                                                                                                                                                                                                                                                                                                                                                                                                     


Neuigkeiten

     Aktuelles
     Motto des Tages

Software

     Produkte
     Quellcodebibliothek

Aktivitäten

     Artikel über Sicherheit
     Anleitung zur Aktivierung von SSL

Muße

     Gedichte
     Musik
     Bilder

Jenseits des Üblichen ....

Besucherstatistik

Besucherstatistik

Monitoring

Montastic status badge