Eine aufbereitete Darstellung der Quelle

 
     
 
 
Anforderungen  |   Konzepte  |   Entwurf  |   Entwicklung  |   Qualitätssicherung  |   Lebenszyklus  |   Steuerung
 
 
 
 

Benutzer

Quelle  mantis_vp3030.c

  Sprache: C
 

// SPDX-License-Identifier: GPL-2.0-or-later
/*
Mantis VP-3030 driver

Copyright (C) Manu Abraham (abraham.manu@gmail.com)

*/


#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/interrupt.h>

#include <media/dmxdev.h>
#include <media/dvbdev.h>
#include <media/dvb_demux.h>
#include <media/dvb_frontend.h>
#include <media/dvb_net.h>

#include "zl10353.h"
#include "tda665x.h"
#include "mantis_common.h"
#include "mantis_ioc.h"
#include "mantis_dvb.h"
#include "mantis_vp3030.h"

static struct zl10353_config mantis_vp3030_config = {
 .demod_address  = 0x0f,
};

static struct tda665x_config env57h12d5_config = {
 .name   = "ENV57H12D5 (ET-50DT)",
 .addr   = 0x60,
 .frequency_min  =  47 * MHz,
 .frequency_max  = 862 * MHz,
 .frequency_offst =   3616667,
 .ref_multiplier  = 6/* 1/6 MHz */
 .ref_divider  = 100000/* 1/6 MHz */
};

#define MANTIS_MODEL_NAME "VP-3030"
#define MANTIS_DEV_TYPE  "DVB-T"


static int vp3030_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
{
 struct i2c_adapter *adapter = &mantis->adapter;
 struct mantis_hwconfig *config = mantis->hwconfig;
 int err = 0;

 mantis_gpio_set_bits(mantis, config->reset, 0);
 msleep(100);
 err = mantis_frontend_power(mantis, POWER_ON);
 msleep(100);
 mantis_gpio_set_bits(mantis, config->reset, 1);

 if (err == 0) {
  msleep(250);
  dprintk(MANTIS_ERROR, 1"Probing for 10353 (DVB-T)");
  fe = dvb_attach(zl10353_attach, &mantis_vp3030_config, adapter);

  if (!fe)
   return -1;

  dvb_attach(tda665x_attach, fe, &env57h12d5_config, adapter);
 } else {
  dprintk(MANTIS_ERROR, 1"Frontend on <%s> POWER ON failed! <%d>",
   adapter->name,
   err);

  return -EIO;

 }
 mantis->fe = fe;
 dprintk(MANTIS_ERROR, 1"Done!");

 return 0;
}

struct mantis_hwconfig vp3030_config = {
 .model_name = MANTIS_MODEL_NAME,
 .dev_type = MANTIS_DEV_TYPE,
 .ts_size = MANTIS_TS_188,

 .baud_rate = MANTIS_BAUD_9600,
 .parity  = MANTIS_PARITY_NONE,
 .bytes  = 0,

 .frontend_init = vp3030_frontend_init,
 .power  = GPIF_A12,
 .reset  = GPIF_A13,

 .i2c_mode = MANTIS_BYTE_MODE
};

Messung V0.5 in Prozent
C=95 H=100 G=97

¤ Dauer der Verarbeitung: 0.12 Sekunden  (vorverarbeitet am  2026-06-05) ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

PVS Prover

Isabelle Prover

NIST Cobol Testsuite

Cephes Mathematical Library

Vienna Development Method

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.






                                                                                                                                                                                                                                                                                                                                                                                                     


Neuigkeiten

     Aktuelles
     Motto des Tages

Open Source Software

     Quellcodebibliothek
     Eigene Quellcodes
     Fremde Quellcodes
     Suchen

Jenseits des Üblichen ....

Besucherstatistik

Besucherstatistik

Statistik
#Sources=434850
#Domains=655579