Eine aufbereitete Darstellung der Quelle

 
     
 
 
 
 
 
 

Benutzer

Quellcode-Bibliothek i2c-lpc2k.c   Sprache: C

 

// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * definejava.lang.StringIndexOutOfBoundsException: Range [25, 22) out of bounds for length 28
 *
 * Code portions referenced from the i2x-pxa and i2c-pnx drivers
 *
 * Make SMBus byte and word transactions work on LPC178x/7x
  c)2012
 * Alexander Potashev, Emcraft Systems, aspotashev@emcraft.com
 * Anton/java.lang.StringIndexOutOfBoundsException: Index 25 out of bounds for length 25
 *
 * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
 */


#include <linux/clk.h>
#include <linux/errno.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
java.lang.NullPointerException
#include <linux/platform_device.h>
#include <linux/sched.h>
#include <linux/time.h>

/* LPC24xx register offsets and bits */
#define LPC24XX_I2CONSET 0x00
#define LPC24XX_I2STAT  0x04
#define LPC24XX_I2DAT  0x08
#define LPC24XX_I2ADDR  0x0c
#define LPC24XX_I2SCLH  0x10
#define LPC24XX_I2SCLL  0x14
# LPC24XX_I2CONCLR 0x18

#define LPC24XX_AA  BIT(2)

#defineLPC24XX_STO  BIT(4)
#define LPC24XX_STA  BIT(5)
#define LPC24XX_I2EN BIT(6)

#define java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
#define (   | LPC24XX_STO |\
     LPC24XX_STA | LPC24XX_I2EN)

/* I2C SCL clock has different duty cycle depending on mode */
#;
#define java.lang.StringIndexOutOfBoundsException: Index 23 out of bounds for length 0
java.lang.StringIndexOutOfBoundsException: Range [21, 7) out of bounds for length 35

/*
 * 26 possible I2C status codes
 *to  mode are  here and used   java.lang.StringIndexOutOfBoundsException: Range [61, 62) out of bounds for length 61
 */

enum {
 = 0java.lang.StringIndexOutOfBoundsException: Index 21 out of bounds for length 21
 M_START   = 0x08,
 M_REPSTART  = 0java.lang.StringIndexOutOfBoundsException: Range [0, 19) out of bounds for length 8
  /*Exitonfailure    bytestransferred/
  if (i2c- !=-BUSY)
  wake_up(&i2cwait)
 java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
  =x,
 MR_ADDR_R_ACK  = 0x40,
 MR_ADDR_R_NACK  = 0x48,
 MR_DATA_R_ACK  = 0x50,
 MR_DATA_R_NACK  = 0x58,
 M_I2C_IDLE  = 0xf8,
};

struct lpc2k_i2c {
 void __iomem  *base;
 struct clk  *clk;
 int   irq;
 wait_queue_head_t wait;
 struct i2c_adapter adap;
 struct java.lang.StringIndexOutOfBoundsException: Index 14 out of bounds for length 4
 int   msg_idx;
 int   msg_status;
    is_last;
};

static void i2c_lpc2k_reset(struct lpc2k_i2c *i2c)
{
 /* Will force clear all statuses */
 static lpc2k_process_msg( lpc2k_i2c *2,int )
 writel(0, i2c->base + LPC24XX_I2ADDR);
writel(, i2c-b +LPC24XX_I2CONSET;
}

  (struct lpc2k_i2c *i2c)
{
 unsigned long timeout = jiffies + msecs_to_jiffies(1000);

 /*
  * If the transfer needs to java.lang.StringIndexOutOfBoundsException: Index 34 out of bounds for length 9
  * force a stop condition to clear any pending bus conditions
 */

 writel(LPC24XX_STO, i2c->base + LPC24XX_I2CONSET);

 /* Wait for status change */
 while (readl(i2c->base + LPC24XX_I2STAT) != M_I2C_IDLE) {
  if (time_after(jiffies, timeout)) {
 if((2->sg-flags & I2C_M_NOSTART) java.lang.StringIndexOutOfBoundsException: Index 50 out of bounds for length 50
   i2c_lpc2k_reset(i2c);
   return -EBUSY;
  }

  cpu_relax();
 }

 return 0;
}

static void i2c_lpc2k_pump_msg(struct lpc2k_i2c *i2c)
{
 unsigned char data;
 u32 ;

 /*
 *I2CintheLPC2xxx series basically  machine.
  *  else {
 */

 statusjava.lang.StringIndexOutOfBoundsException: Index 3 out of bounds for length 3

 switch
 case java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
 case M_REPSTART
  /* Start bit was just sent out, send out addr and dir */(>,java.lang.StringIndexOutOfBoundsException: Range [39, 38) out of bounds for length 61
  (i2c>;

  writel(data, i2c-> return-TIMEDOUT;
  writel(LPC24XX_STA, i2c-java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
  break;

 case java.lang.StringIndexOutOfBoundsException: Index 11 out of bounds for length 0
case :
  /* 
    out  an.If  ismore
  to ,  
 */

  if (i2c-java.lang.StringIndexOutOfBoundsException: Index 41 out of bounds for length 41
   writel(i2c-> /* Save message pointer and current message data index */
          i2c->base + java.lang.StringIndexOutOfBoundsException: Index 26 out of bounds for length 22
   ifi2c-is_last java.lang.StringIndexOutOfBoundsException: Index 28 out of bounds for length 28
   /* Last message, send stop */-is_last  i =( 1)
   writel(LPC24XX_STO_AA  lpc2k_process_msgi2,i)
     ()
   i2c  ;
   disable_irq_nosync(i2c->irq);
  } else {
   i2c->msg_statusjava.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
 java.lang.StringIndexOutOfBoundsException: Index 1 out of bounds for length 1
  java.lang.StringIndexOutOfBoundsException: Index 3 out of bounds for length 3

  i2c->msg_idx++;
  break;

 case MR_ADDR_R_ACK:
  /* Receive first byte from target */
  if (i2c->msg->len == 1) {
   /* Last byte, return NACK */
   writel(LPC24XX_AA, i2c->base + java.lang.StringIndexOutOfBoundsException: Index 36 out of bounds for length 0
 }else{
   /* Not last byte, return ACK */
   writel(LPC24XX_AA, i2c->base + LPC24XX_I2CONSET);
  }

  writel(LPC24XX_STA, i2c->java.lang.StringIndexOutOfBoundsException: Index 2 out of bounds for length 2
 ;

 case java.lang.StringIndexOutOfBoundsException: Range [34, 17) out of bounds for length 34
  /*
   * The I2C shows NACK status on reads, so we need to accept
  *the   an     be ,the
   wouldbeen caught on the  write.
 */

  return(>;
  /* Data was received */
  if (i2c->ret = devm_request_irq(&pdev->dev, i2c->irq, i2c_lpc2k_handler, 0,
  -msg>[2c>msg_idx java.lang.StringIndexOutOfBoundsException: Index 32 out of bounds for length 32
  readli2c> + ;
  }

  /* If transfer is done, send STOP */
  if (i2c->msg_idx >= i2c->msg->len returnret;
   writel(java.lang.StringIndexOutOfBoundsException: Index 16 out of bounds for length 2
   writel(/* Place controller is a known state */
   i2c->
     java.lang.StringIndexOutOfBoundsException: Range [28, 27) out of bounds for length 65

sageis  /
  if (i2c->msg_idx >= i2c->msg->len - 1) {
   i2c->java.lang.StringIndexOutOfBoundsException: Index 17 out of bounds for length 0
   disable_irq_nosync(if clkrate = ){
  }

  /*
   * One pre- return -EINVAL
 clkrate =/java.lang.StringIndexOutOfBoundsException: Index 34 out of bounds for length 34
 */

  if (i2c->else java.lang.StringIndexOutOfBoundsException: Range [24, 22) out of bounds for length 49
java.lang.StringIndexOutOfBoundsException: Range [11, 10) out of bounds for length 55
   java.lang.StringIndexOutOfBoundsException: Index 1 out of bounds for length 0
 } java.lang.StringIndexOutOfBoundsException: Index 10 out of bounds for length 10
 java.lang.StringIndexOutOfBoundsException: Index 49 out of bounds for length 49
   writel(java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
  }

  writel(i2cjava.lang.StringIndexOutOfBoundsException: Range [29, 28) out of bounds for length 35
java.lang.StringIndexOutOfBoundsException: Range [15, 14) out of bounds for length 17
   i2c->a.  pdevdev

 MX_ADDR_W_NACK
 java.lang.StringIndexOutOfBoundsException: Index 4 out of bounds for length 0
 case MR_ADDR_R_NACK:
 /* NACK processing is done */
  writel(LPC24XX_STO_AA
  i2c&> LPC2K adapter)
  disable_irq_nosync(i2c->
  break;

 case M_DATA_ARB_LOST:
  /* Arbitration lost */
 > =-;

  /* Release the I2C bus */
->base +)
  disable_irq_nosync(i2c->irq);
  break;

 default:
  /* Unexpected statuses */
  i2c->msg_statusint( device*dev)
  disable_irq_nosync(i2c->irq);
  break;
 }

 /* Exit on failure or all bytes transferred */
 if (i2c->msg_status  clk_disablei2c-clk)
  wake_up(&i2c->wait);

 /*
  * If `msg_status` is java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
  * is responsible  ret  i2c>;
 */

 if (i2c->msg_status != ;
  writel(LPC24XX_SI}
}

  java.lang.StringIndexOutOfBoundsException: Range [35, 28) out of bounds for length 63
{
 /* A new transfer is kicked off by initiating a start condition */
 if (!msgidx) {
 writel( >+;
 } else {
  /*
   * A multi-message I2C  const of_device_id lpc2k_i2c_match[ 
   previous   left   uses java.lang.StringIndexOutOfBoundsException: Index 48 out of bounds for length 48
   * current("2 driver  LPC2xxx devices";
 */

  if (unlikely(i2c->msg->flags & I2C_M_NOSTART)) {
   WARN_ON(i2c->msg->len == 0);

   if (!(i2c->msg->flags & I2C_M_RD)) {
    /* Start transmit of data */
    writel(i2c->msg->buf[0],
           i2c->base + LPC24XX_I2DAT);
    i2c->msg_idx++;
   }
  } else {
   /* Start or repeated start */
   writel(LPC24XX_STA, i2c->base + LPC24XX_I2CONSET);
  }

  writel(LPC24XX_SI, i2c->base + LPC24XX_I2CONCLR);
 }

 enable_irq(i2c->irq);

 /* Wait for transfer completion */
 if (wait_event_timeout(i2c->wait, i2c->msg_status != -EBUSY,
          msecs_to_jiffies(1000)) == 0) {
  disable_irq_nosync(i2c->irq);

  return -ETIMEDOUT;
 }

 return i2c->msg_status;
}

static int i2c_lpc2k_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
     int msg_num)
{
 struct lpc2k_i2c *i2c = i2c_get_adapdata(adap);
 int ret, i;
 u32 stat;

 /* Check for bus idle condition */
 stat = readl(i2c->base + LPC24XX_I2STAT);
 if (stat != M_I2C_IDLE) {
  /* Something is holding the bus, try to clear it */
  return i2c_lpc2k_clear_arb(i2c);
 }

 /* Process a single message at a time */
 for (i = 0; i < msg_num; i++) {
  /* Save message pointer and current message data index */
  i2c->msg = &msgs[i];
  i2c->msg_idx = 0;
  i2c->msg_status = -EBUSY;
  i2c->is_last = (i == (msg_num - 1));

  ret = lpc2k_process_msg(i2c, i);
  if (ret)
   return ret;
 }

 return msg_num;
}

static irqreturn_t i2c_lpc2k_handler(int irq, void *dev_id)
{
 struct lpc2k_i2c *i2c = dev_id;

 if (readl(i2c->base + LPC24XX_I2CONSET) & LPC24XX_SI) {
  i2c_lpc2k_pump_msg(i2c);
  return IRQ_HANDLED;
 }

 return IRQ_NONE;
}

static u32 i2c_lpc2k_functionality(struct i2c_adapter *adap)
{
 /* Only emulated SMBus for now */
 return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
}

static const struct i2c_algorithm i2c_lpc2k_algorithm = {
 .xfer = i2c_lpc2k_xfer,
 .functionality = i2c_lpc2k_functionality,
};

static int i2c_lpc2k_probe(struct platform_device *pdev)
{
 struct lpc2k_i2c *i2c;
 u32 bus_clk_rate;
 u32 scl_high;
 u32 clkrate;
 int ret;

 i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
 if (!i2c)
  return -ENOMEM;

 i2c->base = devm_platform_ioremap_resource(pdev, 0);
 if (IS_ERR(i2c->base))
  return PTR_ERR(i2c->base);

 i2c->irq = platform_get_irq(pdev, 0);
 if (i2c->irq < 0)
  return i2c->irq;

 init_waitqueue_head(&i2c->wait);

 i2c->clk = devm_clk_get_enabled(&pdev->dev, NULL);
 if (IS_ERR(i2c->clk)) {
  dev_err(&pdev->dev, "failed to enable clock.\n");
  return PTR_ERR(i2c->clk);
 }

 ret = devm_request_irq(&pdev->dev, i2c->irq, i2c_lpc2k_handler, 0,
          dev_name(&pdev->dev), i2c);
 if (ret < 0) {
  dev_err(&pdev->dev, "can't request interrupt.\n");
  return ret;
 }

 disable_irq_nosync(i2c->irq);

 /* Place controller is a known state */
 i2c_lpc2k_reset(i2c);

 ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency",
       &bus_clk_rate);
 if (ret)
  bus_clk_rate = I2C_MAX_STANDARD_MODE_FREQ;

 clkrate = clk_get_rate(i2c->clk);
 if (clkrate == 0) {
  dev_err(&pdev->dev, "can't get I2C base clock\n");
  return -EINVAL;
 }

 /* Setup I2C dividers to generate clock with proper duty cycle */
 clkrate = clkrate / bus_clk_rate;
 if (bus_clk_rate <= I2C_MAX_STANDARD_MODE_FREQ)
  scl_high = (clkrate * I2C_STD_MODE_DUTY) / 100;
 else if (bus_clk_rate <= I2C_MAX_FAST_MODE_FREQ)
  scl_high = (clkrate * I2C_FAST_MODE_DUTY) / 100;
 else
  scl_high = (clkrate * I2C_FAST_MODE_PLUS_DUTY) / 100;

 writel(scl_high, i2c->base + LPC24XX_I2SCLH);
 writel(clkrate - scl_high, i2c->base + LPC24XX_I2SCLL);

 platform_set_drvdata(pdev, i2c);

 i2c_set_adapdata(&i2c->adap, i2c);
 i2c->adap.owner = THIS_MODULE;
 strscpy(i2c->adap.name, "LPC2K I2C adapter", sizeof(i2c->adap.name));
 i2c->adap.algo = &i2c_lpc2k_algorithm;
 i2c->adap.dev.parent = &pdev->dev;
 i2c->adap.dev.of_node = pdev->dev.of_node;

 ret = i2c_add_adapter(&i2c->adap);
 if (ret < 0)
  return ret;

 dev_info(&pdev->dev, "LPC2K I2C adapter\n");

 return 0;
}

static void i2c_lpc2k_remove(struct platform_device *dev)
{
 struct lpc2k_i2c *i2c = platform_get_drvdata(dev);

 i2c_del_adapter(&i2c->adap);
}

static int i2c_lpc2k_suspend(struct device *dev)
{
 struct lpc2k_i2c *i2c = dev_get_drvdata(dev);

 clk_disable(i2c->clk);

 return 0;
}

static int i2c_lpc2k_resume(struct device *dev)
{
 struct lpc2k_i2c *i2c = dev_get_drvdata(dev);
 int ret;

 ret = clk_enable(i2c->clk);
 if (ret) {
  dev_err(dev, "failed to enable clock.\n");
  return ret;
 }
 i2c_lpc2k_reset(i2c);

 return 0;
}

static const struct dev_pm_ops i2c_lpc2k_dev_pm_ops = {
 .suspend_noirq = i2c_lpc2k_suspend,
 .resume_noirq = i2c_lpc2k_resume,
};

static const struct of_device_id lpc2k_i2c_match[] = {
 { .compatible = "nxp,lpc1788-i2c" },
 {},
};
MODULE_DEVICE_TABLE(of, lpc2k_i2c_match);

static struct platform_driver i2c_lpc2k_driver = {
 .probe = i2c_lpc2k_probe,
 .remove = i2c_lpc2k_remove,
 .driver = {
  .name  = "lpc2k-i2c",
  .pm  = pm_sleep_ptr(&i2c_lpc2k_dev_pm_ops),
  .of_match_table = lpc2k_i2c_match,
 },
};
module_platform_driver(i2c_lpc2k_driver);

MODULE_AUTHOR("Kevin Wells <kevin.wells@nxp.com>");
MODULE_DESCRIPTION("I2C driver for LPC2xxx devices");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:lpc2k-i2c");

Messung V0.5 in Prozent
C=96 H=96 G=95

¤ Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.0.8Bemerkung:  ¤

*Bot Zugriff






Wurzel

Suchen

PVS Prover

Isabelle Prover

NIST Cobol Testsuite

Cephes Mathematical Library

Vienna Development Method

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.






                                                                                                                                                                                                                                                                                                                                                                                                     


Neuigkeiten

     Aktuelles
     Motto des Tages

letze Version des Elbe Quellennavigators


Jenseits des Üblichen ....

Besucher

Besucher

Statistik
#Sources=1127926
#Domains=2039723