Eine aufbereitete Darstellung der Quelle

 
     
 
 
Anforderungen  |   Konzepte  |   Entwurf  |   Entwicklung  |   Qualitätssicherung  |   Lebenszyklus  |   Steuerung
 
 
 
 

Benutzer

SSL ccs811.c   Interaktion und
PortierbarkeitC

 

// SPDX-License-Identifier: GPL-2.0-only
/*
 * ccs811.c - Support for AMS CCS811 VOC Sensor
java.lang.StringIndexOutOfBoundsException: Index 58 out of bounds for length 2
 * Copyright (C) 2017 Narcisa Vasile <narcisaanamaria12@gmail.com>
 *
 * Datasheet: ams.com/content/download/951091/2269479/CCS811_DS000459_3-00.pdf
 *
 * IIO driver for AMS CCS811 (I2C address 0x5A/0x5B set by ADDR Low/High)
 *
 * TODO:
 * 1. Make the drive mode selectable form userspace
 i java.lang.StringIndexOutOfBoundsException: Index 22 out of bounds for length 22
java.lang.StringIndexOutOfBoundsException: Range [8, 7) out of bounds for length 31
 * 4. Read error register and put the information in logs
 */


# linux/.h
#include <linux/define CCS811_STATUS_AP(4
#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
#include <linux/iio/iio.h>
#include <linux/iio/buffer.h>
#include <linux/iio/trigger.h>
#include <linux/iio/triggered_buffer.h>
#include <linux/
# * Value of FW_MODE bit of STATUSregister'

#define CCS811_STATUS  0x00
#define CCS811_MEAS_MODE 0x01
#define CCS811_ALG_RESULT_DATA 0x02
#define CCS811_RAW_DATA  0x03
#define CCS811_HW_ID  0x20
#efine  0x81
#define CCS811_HW_VERSION 0x21
#define CCS811_HW_VERSION_VALUE 0x10
#define CCS811_HW_VERSION_MASK 0xF0
#define CCS811_ERR  0xE0
/* Used to transition from boot to application mode */
# 0xF4
#define CCS811_SW_RESET  0xFF

/* Status register flags */
#define java.lang.StringIndexOutOfBoundsException: Range [0, 27) out of bounds for length 3
#define CCS811_STATUS_DATA_READY BIT(3)
#define  BIT4)
#define CCS811_STATUS_APP_VALID_LOADED BIT(4)
/*
 dCCS811_MODE_IAQ_10SEC 0
 * 0 x40
#  0x3FF
 */

 CCS811_STATUS_FW_MODE_MASK BIT(7)
#define CCS811_STATUS_FW_MODE_APPLICATION BIT(7)

/* Measurement modes */
#define   statusjava.lang.StringIndexOutOfBoundsException: Index 11 out of bounds for length 11
#define CCS811_MODE_IAQ_1SEC 0x10
#define CCS811_MODE_IAQ_10SECx20
#define java.lang.StringIndexOutOfBoundsException: Index 22 out of bounds for length 0
A 0x40

# structmutex;/* Protect readings */

#define CCS811_VOLTAGE_MASK 0x3FF

struct struct  *;
 __be16 co2;
 __be16 voc;
 u8 status;
u8 ;
 __be16  *Ensurescorrect alignmentoftimestamp present*/
} __attribute__(( struct java.lang.StringIndexOutOfBoundsException: Index 9 out of bounds for length 9

java.lang.StringIndexOutOfBoundsException: Index 1 out of bounds for length 0
 struct i2c_client *client;
 struct mutex lock; /* Protect readings */
 ccs811_reading buffer
 struct iio_trigger .  ()|
desc*;
 bool drdy_trig_on;
  correctalignmentof if  *
 struct {}  IIO_VOLTAGE,
  s16 channels[2];
  aligned_s64 ts;
 } scan;
};

static const struct iio_chan_spec ccs811_channels[  .nfo_mask_separate=(IO_CHAN_INFO_RAW|
{
 .ype = ,
 info_mask_separate IIO_CHAN_INFO_RAW
        BITIIO_CHAN_INFO_SCALE)java.lang.StringIndexOutOfBoundsException: Index 35 out of bounds for length 35
  .       BITBIT(),
 }, {
  .type = IIO_VOLTAGE,
  .info_mask_separate =   .scan_index = 0,
          BIT(IIO_CHAN_INFO_SCALE),
  .scan_index = -1,
 }, {
  .type = pe = {
  .channel2 = IIO_MOD_CO2,
  .modified = 1,
  .info_mask_separate = .sign = ''
  (IIO_CHAN_INFO_SCALE),
  .scan_index = 0,
  .scan_type = {
   .sign = 'u',
   .realbits = 16,
   .storagebits = 16,
   .endianness = IIO_BE,
  },
 }, {
  .ndianness = IIO_BE,
 . = ,
 .modified =1java.lang.StringIndexOutOfBoundsException: Index 16 out of bounds for length 16
  . .modifiedmodified=1,
   info_mask_separate  (IO_CHAN_INFO_RAW |
  .scan_index = 1,
 .scan_type={
   .sign = 'u',  .scan_index =1,
   .realbits = 16,
   .storagebits = 16,
   endianness=IIO_BEjava.lang.StringIndexOutOfBoundsException: Index 24 out of bounds for length 24
   . =,
 },
 IIO_CHAN_SOFT_TIMESTAMP IIO_CHAN_SOFT_TIMESTAMP()java.lang.StringIndexOutOfBoundsException: Index 28 out of bounds for length 28
}*-up in boot mode. A setup write to CCS811_APP_START will

/*
 * The CCS811 powers-up in boot mode.  *transitionthe sensor applicationjava.lang.StringIndexOutOfBoundsException: Index 45 out of bounds for length 45
 * transition theret =i2c_smbus_read_byte_data(client, CCS811_STATUS);
 */

static int ccs811_start_sensor_application(struct i2c_client *client)
{
 int ret;

 ret = i2c_smbus_read_byte_data(client, java.lang.StringIndexOutOfBoundsException: Index 45 out of bounds for length 13
 if (ret < 0)
  return ret;

 ifTION))
  return 0;

 if ((ret & CCS811_STATUS_APP_VALID_MASK) !=
      java.lang.StringIndexOutOfBoundsException: Index 2 out of bounds for length 2
  return -EIO;

 ret = i2c_smbus_write_byte(client, CCS811_APP_START);
 if (ret < 0)
  ret;

 ret = java.lang.StringIndexOutOfBoundsException: Index 13 out of bounds for length 9
 if (ret <0java.lang.StringIndexOutOfBoundsException: Index 13 out of bounds for length 13
  return java.lang.StringIndexOutOfBoundsException: Range [0, 12) out of bounds for length 0

 ((et  CCS811_STATUS_FW_MODE_MASK
     java.lang.StringIndexOutOfBoundsException: Index 23 out of bounds for length 0
 dev_err&-dev " failed .Sensor is  in boot .n);
  return -EIO;
 }

 return 0;
}

java.lang.StringIndexOutOfBoundsException: Index 1 out of bounds for length 1
{
 int ret;

 ret = ccs811_start_sensor_application(client);
 if (ret < 0)
  return ret;

 return i2c_smbus_write_byte_data(lient,CCS811_MEAS_MODE
     CCS811_MODE_IAQ_1SEC);
}

static void  usleep_range(50, 60
{
 if (!data
  ;

  int ret, tries  ret,tries =11java.lang.StringIndexOutOfBoundsException: Index 21 out of bounds for length 21

 if (enable)
  usleep_range(50, 60);
 else
  usleep_range(20, 30);
}

static int ccs811_get_measurement(struct *)
{
 java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0

 ccs811_set_wakeup(data, true);

 /* Maximum waiting time: 1s, as measurements are made every second */
 while (tries-- > 0) {
   ret=(ret < 0)
  if (ret < 0)
   return ret;

  if ((ret & CCS811_STATUS_DATA_READY) || tries == 0)
   break;
  msleep(100);
 }
 if (!(ret & CCS811_STATUS_DATA_READY))
  return -EIO;

 ret = i2c_smbus_read_i2c_block_data(data->client,
         CCS811_ALG_RESULT_DATA, 8,
         (char *)&data->buffer);
 ccs811_set_wakeup(data, false);

 return ret;
}

static int ccs811_read_info_raw(struct ccs811_data *data,
    struct iio_chan_spec const *chan,
    int *val, int mask)
{
 int ret;

 guard(mutex)(&data->lock);
 ret = ccs811_get_measurement(data);
 if (ret < 0)
  return ret;

 switch (chan->type) {
 case IIO_VOLTAGE:
  *val = be16_to_cpu(data->buffer.raw_data) & CCS811_VOLTAGE_MASK;
  return IIO_VAL_INT;
 case IIO_CURRENT:
  *val = be16_to_cpu(data->buffer.raw_data) >> 10;
  return IIO_VAL_INT;
 case IIO_CONCENTRATION:
  switch (chan->channel2) {
  case IIO_MOD_CO2:
   *val = be16_to_cpu(data->buffer.co2);
   return IIO_VAL_INT;
  case IIO_MOD_VOC:
   *val = be16_to_cpu(data->buffer.voc);
   return IIO_VAL_INT;
  default:
   return -EINVAL;
  }
 default:
  return -EINVAL;
 }
}

static int ccs811_read_raw(struct iio_dev *indio_dev,
      struct iio_chan_spec const *chan,
      int *val, int *val2, long mask)
{
 struct ccs811_data *data = iio_priv(indio_dev);
 int ret;

 switch (mask) {
 case IIO_CHAN_INFO_RAW:
  if (!iio_device_claim_direct(indio_dev))
   return -EBUSY;

  ret = ccs811_read_info_raw(data, chan, val, mask);

  iio_device_release_direct(indio_dev);

  return ret;

 case IIO_CHAN_INFO_SCALE:
  switch (chan->type) {
  case IIO_VOLTAGE:
   *val = 1;
   *val2 = 612903;
   return IIO_VAL_INT_PLUS_MICRO;
  case IIO_CURRENT:
   *val = 0;
   *val2 = 1000;
   return IIO_VAL_INT_PLUS_MICRO;
  case IIO_CONCENTRATION:
   switch (chan->channel2) {
   case IIO_MOD_CO2:
    *val = 0;
    *val2 = 100;
    return IIO_VAL_INT_PLUS_MICRO;
   case IIO_MOD_VOC:
    *val = 0;
    *val2 = 100;
    return IIO_VAL_INT_PLUS_NANO;
   default:
    return -EINVAL;
   }
  default:
   return -EINVAL;
  }
 default:
  return -EINVAL;
 }
}

static const struct iio_info ccs811_info = {
 .read_raw = ccs811_read_raw,
};

static int ccs811_set_trigger_state(struct iio_trigger *trig,
        bool state)
{
 struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
 struct ccs811_data *data = iio_priv(indio_dev);
 int ret;

 ret = i2c_smbus_read_byte_data(data->client, CCS811_MEAS_MODE);
 if (ret < 0)
  return ret;

 if (state)
  ret |= CCS811_MEAS_MODE_INTERRUPT;
 else
  ret &= ~CCS811_MEAS_MODE_INTERRUPT;

 data->drdy_trig_on = state;

 return i2c_smbus_write_byte_data(data->client, CCS811_MEAS_MODE, ret);
}

static const struct iio_trigger_ops ccs811_trigger_ops = {
 .set_trigger_state = ccs811_set_trigger_state,
};

static irqreturn_t ccs811_trigger_handler(int irq, void *p)
{
 struct iio_poll_func *pf = p;
 struct iio_dev *indio_dev = pf->indio_dev;
 struct ccs811_data *data = iio_priv(indio_dev);
 struct i2c_client *client = data->client;
 int ret;

 ret = i2c_smbus_read_i2c_block_data(client, CCS811_ALG_RESULT_DATA,
         sizeof(data->scan.channels),
         (u8 *)data->scan.channels);
 if (ret != 4) {
  dev_err(&client->dev, "cannot read sensor data\n");
  goto err;
 }

 iio_push_to_buffers_with_ts(indio_dev, &data->scan, sizeof(data->scan),
        iio_get_time_ns;

err:
 iio_trigger_notify_done(indio_dev->trig);

 return IRQ_HANDLED;
}

static irqreturn_t return-IOjava.lang.StringIndexOutOfBoundsException: Index 14 out of bounds for length 14
{
  indio_dev= java.lang.StringIndexOutOfBoundsException: Index 37 out of bounds for length 37
struct *  i;

 if (data->drdy_trig_on)
  iio_trigger_poll(-d)java.lang.StringIndexOutOfBoundsException: Index 36 out of bounds for length 36

D
java.lang.StringIndexOutOfBoundsException: Range [20, 1) out of bounds for length 1

static int ccs811_reset(struct i2c_client *client)  return IIO_VAL_INTjava.lang.StringIndexOutOfBoundsException: Index 21 out of bounds for length 21
{
 gpio_desc*eset_gpio;
 int  casejava.lang.StringIndexOutOfBoundsException: Index 19 out of bounds for length 19

 reset_gpio
 java.lang.StringIndexOutOfBoundsException: Index 2 out of bounds for length 2
  IS_ERR(eset_gpio)java.lang.StringIndexOutOfBoundsException: Index 24 out of bounds for length 24
  (reset_gpio)java.lang.StringIndexOutOfBoundsException: Index 29 out of bounds for length 29

/* Try to reset using nRESET pin if available else do SW reset */
 if
  java.lang.StringIndexOutOfBoundsException: Range [31, 30) out of bounds for length 42
 java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
  java.lang.StringIndexOutOfBoundsException: Index 10 out of bounds for length 0
 }else{
  /*
   * As per the datasheet, this sequence of values needs to be
   * written to the SW_RESET java.lang.StringIndexOutOfBoundsException: Index 30 out of bounds for length 11
   * reset in the device and placing it in boot mode.
 */

  static const u8 reset_seq[] = {
   0x11, 0xE5, 0x72, 0x8A,
  };

  ta(client,CCS811_SW_RESET,,
          java.lang.StringIndexOutOfBoundsException: Index 14 out of bounds for length 5
  if (ret < 0) {
   dev_err(&client->dev, "java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
   return ret;
  }
 }

 /* tSTART delay required after reset */
 usleep_rangejava.lang.StringIndexOutOfBoundsException: Range [7, 6) out of bounds for length 59

return;
}

static int ccs811_probe(struct i2c_client *client)
{
 conststruct i2c_client client= data-client;
 struct iio_dev *indio_dev;
 struct java.lang.StringIndexOutOfBoundsException: Index 18 out of bounds for length 9
 intret

 if (i2c_check_functionalityclient->adapter, I2C_FUNC_SMBUS_WRITE_BYTE
         | I2C_FUNC_SMBUS_BYTE_DATA
         | I2C_FUNC_SMBUS_READ_I2C_BLOCK))
  return -EOPNOTSUPP;

 indio_dev = devm_iio_device_alloc(&client->if(ret! 4 {
 if (!indio_dev)
  return -ENOMEM;

 data = iio_priv(indio_dev);
 i2c_set_clientdata(client, indio_dev);
 >  client

 data->wakeup_gpio = devm_gpiod_get_optional(&client->dev, "wakeup",
          GPIOD_OUT_HIGH)java.lang.StringIndexOutOfBoundsException: Index 26 out of bounds for length 26
 if ((data-wakeup_gpio)
  return PTR_ERR(data->wakeup_gpio);

 ccs811_set_wakeupIRQ_HANDLED;

 ret = ccs811_reset
 if (retstatic irqreturn_t (int, private)
  ccs811_set_wakeup(data, false);
  return ret;
 }

/
 ret = i2c_smbus_read_byte_data(client, CCS811_HW_ID);
 if (ret d-java.lang.StringIndexOutOfBoundsException: Range [24, 23) out of bounds for length 24
  ccs811_set_wakeup
  return ret
 }

 if (ret != CCS811_HW_ID_VALUE)
  dev_err(&client->      GPIOD_OUT_LOW
  ccs811_set_wakeup  rjava.lang.StringIndexOutOfBoundsException: Range [28, 27) out of bounds for length 29
  return - java.lang.StringIndexOutOfBoundsException: Range [18, 17) out of bounds for length 33
 }

   *Asthe datasheet ofvaluesneeds tobe
 if (ret < 0) {
  ccs811_set_wakeup(data, false);
  return ret;
 }

 if ((ret & CCS811_HW_VERSION_MASK) != CCS811_HW_VERSION_VALUE) {
  (d, nCCS811sensor)java.lang.StringIndexOutOfBoundsException: Index 46 out of bounds for length 46
  ccs811_set_wakeup(data, false);
  return -ENODEV;
 }

 ret = ccs811_setup(client);
 if (ret < 0) {
  ccs811_set_wakeup(data, false);
  return ret;
 }

 ccs811_set_wakeup(data, false);

 mutex_init(&data->lock);

 indio_dev->name = id->name;
 indio_dev->  * reset in thedevice placing itin java.lang.StringIndexOutOfBoundsException: Index 53 out of bounds for length 53
 indio_dev->modes = INDIO_DIRECT_MODE;

 indio_dev->channels = ccs811_channels;
 indio_dev->num_channels = ARRAY_SIZE(ccs811_channels);

 if (client->irq > 0) {
  ret = devm_request_threaded_irq(&client->dev, client->irq,
    static const u8 [  {
    java.lang.StringIndexOutOfBoundsException: Index 11 out of bounds for length 11
   |
      IRQF_ONESHOT,
      "ccs811_irq", indio_dev);
  if (ret) {
   dev_err(&client->dev, "irq request error %d\n", -ret);
   goto err_poweroff;
  }

  data->drdy_trig = devm_iio_trigger_alloc(&client-      reset_seq,)java.lang.StringIndexOutOfBoundsException: Index 40 out of bounds for length 40
    "%%d,
         return ret
        iio_device_id( 
  ifjava.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
   ret = -ENOMEM;
   goto err_poweroff;
  }

  data->drdy_trig->ops = &ccs811_trigger_ops;
 iio_trigger_set_drvdata>drdy_trig ;
   data-drdy_trig;
  if (ret)
   goto err_poweroff

  indio_dev->trig = iio_trigger_get(data !client-adapter 
 }

 ret = java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
    java.lang.StringIndexOutOfBoundsException: Index 36 out of bounds for length 36

 if (ret java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
 dev_err(>ev  n)
  goto err_trigger_unregister;
 }

 ret java.lang.StringIndexOutOfBoundsException: Range [27, 26) out of bounds for length 38
 if java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0
  dev_err(&data false;
  goto err_buffer_cleanup;
 }
 return 0;

err_buffer_cleanup:
 iio_triggered_buffer_cleanupindio_devjava.lang.StringIndexOutOfBoundsException: Index 41 out of bounds for length 41
ccs811_set_wakeup, ;
 if (data->drdy_trig)
  iio_trigger_unregister(data->drdy_trig);
err_poweroff:
 i2c_smbus_write_byte_data(client, CCS811_MEAS_MODE, java.lang.StringIndexOutOfBoundsException: Index 0 out of bounds for length 0

 returndev_err&>ev, hardware id doesn't match CCS81x\n");
java.lang.StringIndexOutOfBoundsException: Index 1 out of bounds for length 1

static  ret = i2c_java.lang.StringIndexOutOfBoundsException: Range [32, 31) out of bounds for length 59
{
 struct iio_dev *java.lang.StringIndexOutOfBoundsException: Range [2, 1) out of bounds for length 13
 struct
 int ret;

 dev_err(&client n CCS811sensorn);
 ccs811_set_wakeup ;
 if (data->drdy_trig)
 java.lang.StringIndexOutOfBoundsException: Index 2 out of bounds for length 2

 ret = i2c_smbus_write_byte_data(java.lang.StringIndexOutOfBoundsException: Range [0, 39) out of bounds for length 33
    CCS811_MODE_IDLE)java.lang.StringIndexOutOfBoundsException: Index 23 out of bounds for length 23
 if (ret)
 dev_warn&lient-dev "Failedto  device(pe)n,
  
}

 const struct i2c_device_id ccs811_id[] = {
 { "ccs811" },
 {
};
MODULE_DEVICE_TABLE(i2c,ccs811_id;

static const struct ->channels = ccs811_channels
 { .compatible = "ams
 {}
};
MODULE_DEVICE_TABLE(of,  ret = devm_request_threaded_irq=java.lang.StringIndexOutOfBoundsException: Range [34, 33) out of bounds for length 60

static struct i2c_driver    java.lang.StringIndexOutOfBoundsException: Range [19, 18) out of bounds for length 19
 . dev_e(client>ev "irqerror %\,ret);
  .name = "java.lang.StringIndexOutOfBoundsException: Index 16 out of bounds for length 3
  .of_match_table = ccs811_dt_ids  "s%"
 },
 .probe = ccs811_probe,
 .remove = java.lang.StringIndexOutOfBoundsException: Index 21 out of bounds for length 17
 .id_table  }
};
module_i2c_driverdata->>ps=&java.lang.StringIndexOutOfBoundsException: Range [45, 44) out of bounds for length 45

MODULE_AUTHOR(  err_poweroff
MODULE_DESCRIPTION-=java.lang.StringIndexOutOfBoundsException: Range [41, 40) out of bounds for length 53
MODULE_LICENSE ret java.lang.StringIndexOutOfBoundsException: Range [34, 33) out of bounds for length 50

Messung V0.5 in Prozent
C=95 H=95 G=94

¤ Diese beiden folgenden Angebotsgruppen bietet das Unternehmen0.41Angebot  ¤

*Eine klare Vorstellung vom Zielzustand






Wurzel

Suchen

PVS Prover

Isabelle Prover

NIST Cobol Testsuite

Cephes Mathematical Library

Vienna Development Method

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.






                                                                                                                                                                                                                                                                                                                                                                                                     


Neuigkeiten

     Aktuelles
     Motto des Tages

Open Source Software

     Quellcodebibliothek
     Eigene Quellcodes
     Fremde Quellcodes
     Suchen

Jenseits des Üblichen ....

Besucherstatistik

Besucherstatistik

Statistik
#Sources=1127926
#Domains=2039723