Anforderungen  |   Konzepte  |   Entwurf  |   Entwicklung  |   Qualitätssicherung  |   Lebenszyklus  |   Steuerung
 
 
 
 


Quelle  spi-clps711x.c   Sprache: C

 
// SPDX-License-Identifier: GPL-2.0-or-later
/*
 *  CLPS711X SPI bus driver
 *
 *  Copyright (C) 2012-2016 Alexander Shiyan <shc_work@mail.ru>
 */


#include <linux/io.h>
#include <linux/clk.h>
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/mfd/syscon.h>
#include <linux/mfd/syscon/clps711x.h>
#include <linux/spi/spi.h>

#define DRIVER_NAME  "clps711x-spi"

#define SYNCIO_FRMLEN(x) ((x) << 8)
#define SYNCIO_TXFRMEN  (1 << 14)

struct spi_clps711x_data {
 void __iomem  *syncio;
 struct regmap  *syscon;
 struct clk  *spi_clk;

 u8   *tx_buf;
 u8   *rx_buf;
 unsigned int  bpw;
 int   len;
};

static int spi_clps711x_prepare_message(struct spi_controller *host,
     struct spi_message *msg)
{
 struct spi_clps711x_data *hw = spi_controller_get_devdata(host);
 struct spi_device *spi = msg->spi;

 /* Setup mode for transfer */
 return regmap_update_bits(hw->syscon, SYSCON_OFFSET, SYSCON3_ADCCKNSEN,
      (spi->mode & SPI_CPHA) ?
      SYSCON3_ADCCKNSEN : 0);
}

static int spi_clps711x_transfer_one(struct spi_controller *host,
         struct spi_device *spi,
         struct spi_transfer *xfer)
{
 struct spi_clps711x_data *hw = spi_controller_get_devdata(host);
 u8 data;

 clk_set_rate(hw->spi_clk, xfer->speed_hz ? : spi->max_speed_hz);

 hw->len = xfer->len;
 hw->bpw = xfer->bits_per_word;
 hw->tx_buf = (u8 *)xfer->tx_buf;
 hw->rx_buf = (u8 *)xfer->rx_buf;

 /* Initiate transfer */
 data = hw->tx_buf ? *hw->tx_buf++ : 0;
 writel(data | SYNCIO_FRMLEN(hw->bpw) | SYNCIO_TXFRMEN, hw->syncio);

 return 1;
}

static irqreturn_t spi_clps711x_isr(int irq, void *dev_id)
{
 struct spi_controller *host = dev_id;
 struct spi_clps711x_data *hw = spi_controller_get_devdata(host);
 u8 data;

 /* Handle RX */
 data = readb(hw->syncio);
 if (hw->rx_buf)
  *hw->rx_buf++ = data;

 /* Handle TX */
 if (--hw->len > 0) {
  data = hw->tx_buf ? *hw->tx_buf++ : 0;
  writel(data | SYNCIO_FRMLEN(hw->bpw) | SYNCIO_TXFRMEN,
         hw->syncio);
 } else
  spi_finalize_current_transfer(host);

 return IRQ_HANDLED;
}

static int spi_clps711x_probe(struct platform_device *pdev)
{
 struct device_node *np = pdev->dev.of_node;
 struct spi_clps711x_data *hw;
 struct spi_controller *host;
 int irq, ret;

 irq = platform_get_irq(pdev, 0);
 if (irq < 0)
  return irq;

 host = spi_alloc_host(&pdev->dev, sizeof(*hw));
 if (!host)
  return -ENOMEM;

 host->use_gpio_descriptors = true;
 host->bus_num = -1;
 host->mode_bits = SPI_CPHA | SPI_CS_HIGH;
 host->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 8);
 host->dev.of_node = pdev->dev.of_node;
 host->prepare_message = spi_clps711x_prepare_message;
 host->transfer_one = spi_clps711x_transfer_one;

 hw = spi_controller_get_devdata(host);

 hw->spi_clk = devm_clk_get(&pdev->dev, NULL);
 if (IS_ERR(hw->spi_clk)) {
  ret = PTR_ERR(hw->spi_clk);
  goto err_out;
 }

 hw->syscon = syscon_regmap_lookup_by_phandle(np, "syscon");
 if (IS_ERR(hw->syscon)) {
  ret = PTR_ERR(hw->syscon);
  goto err_out;
 }

 hw->syncio = devm_platform_ioremap_resource(pdev, 0);
 if (IS_ERR(hw->syncio)) {
  ret = PTR_ERR(hw->syncio);
  goto err_out;
 }

 /* Disable extended mode due hardware problems */
 regmap_update_bits(hw->syscon, SYSCON_OFFSET, SYSCON3_ADCCON, 0);

 /* Clear possible pending interrupt */
 readl(hw->syncio);

 ret = devm_request_irq(&pdev->dev, irq, spi_clps711x_isr, 0,
          dev_name(&pdev->dev), host);
 if (ret)
  goto err_out;

 ret = devm_spi_register_controller(&pdev->dev, host);
 if (!ret)
  return 0;

err_out:
 spi_controller_put(host);

 return ret;
}

static const struct of_device_id clps711x_spi_dt_ids[] = {
 { .compatible = "cirrus,ep7209-spi", },
 { }
};
MODULE_DEVICE_TABLE(of, clps711x_spi_dt_ids);

static struct platform_driver clps711x_spi_driver = {
 .driver = {
  .name = DRIVER_NAME,
  .of_match_table = clps711x_spi_dt_ids,
 },
 .probe = spi_clps711x_probe,
};
module_platform_driver(clps711x_spi_driver);

MODULE_LICENSE("GPL");
MODULE_AUTHOR("Alexander Shiyan ");
MODULE_DESCRIPTION("CLPS711X SPI bus driver");
MODULE_ALIAS("platform:" DRIVER_NAME);

Messung V0.5
C=81 H=95 G=88

¤ Dauer der Verarbeitung: 0.3 Sekunden  ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.






                                                                                                                                                                                                                                                                                                                                                                                                     


Neuigkeiten

     Aktuelles
     Motto des Tages

Software

     Produkte
     Quellcodebibliothek

Aktivitäten

     Artikel über Sicherheit
     Anleitung zur Aktivierung von SSL

Muße

     Gedichte
     Musik
     Bilder

Jenseits des Üblichen ....
    

Besucherstatistik

Besucherstatistik

Monitoring

Montastic status badge