// SPDX-License-Identifier: GPL-2.0-or-later
/* P9 gzip sample code for demonstrating the P9 NX hardware interface.
* Not intended for productive uses or for performance or compression
* ratio measurements . For simplicity of demonstration , this sample
* code compresses in to fixed Huffman blocks only ( Deflate btype = 1 )
* and has very simple memory management . Dynamic Huffman blocks
* ( Deflate btype = 2 ) are more involved as detailed in the user guide .
* Note also that / dev / crypto / gzip , VAS and skiboot support are
* required .
*
* Copyright 2020 IBM Corp .
*
* https : //github.com/libnxz/power-gzip for zlib api and other utils
*
* Author : Bulent Abali < abali @ us . ibm . com >
*
* Definitions of acronyms used here . See
* P9 NX Gzip Accelerator User ' s Manual for details :
* https : //github.com/libnxz/power-gzip/blob/develop/doc/power_nx_gzip_um.pdf
*
* adler / crc : 32 bit checksums appended to stream tail
* ce : completion extension
* cpb : coprocessor parameter block ( metadata )
* crb : coprocessor request block ( command )
* csb : coprocessor status block ( status )
* dht : dynamic huffman table
* dde : data descriptor element ( address , length )
* ddl : list of ddes
* dh / fh : dynamic and fixed huffman types
* fc : coprocessor function code
* histlen : history / dictionary length
* history : sliding window of up to 32 KB of data
* lzcount : Deflate LZ symbol counts
* rembytecnt : remaining byte count
* sfbt : source final block type ; last block ' s type during decomp
* spbc : source processed byte count
* subc : source unprocessed bit count
* tebc : target ending bit count ; valid bits in the last byte
* tpbc : target processed byte count
* vas : virtual accelerator switch ; the user mode interface
*/
#define _ISOC11_SOURCE // For aligned_alloc()
#define _DEFAULT_SOURCE // For endian.h
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <stdint.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/time.h>
#include <sys/fcntl.h>
#include <sys/mman.h>
#include <endian.h>
#include <bits/endian.h>
#include <sys/ioctl.h>
#include <assert.h>
#include <errno.h>
#include <signal.h>
#include "utils.h"
#include "nxu.h"
#include "nx.h"
int nx_dbg;
FILE *nx_gzip_log;
#define NX_MIN(X, Y) (((X) < (Y)) ? (X) : (Y))
#define FNAME_MAX 1024
#define FEXT ".nx.gz"
#define SYSFS_MAX_REQ_BUF_PATH "devices/vio/ibm,compression-v1/nx_gzip_caps/req_max_processed_len"
/*
* LZ counts returned in the user supplied nx_gzip_crb_cpb_t structure .
*/
static int compress_fht_sample(char *src, uint32_t srclen, char *dst,
uint32_t dstlen, int with_count,
struct nx_gzip_crb_cpb_t *cmdp, void *handle)
{
uint32_t fc;
assert(!!cmdp);
put32(cmdp->crb, gzip_fc, 0 ); /* clear */
fc = (with_count) ? GZIP_FC_COMPRESS_RESUME_FHT_COUNT :
GZIP_FC_COMPRESS_RESUME_FHT;
putnn(cmdp->crb, gzip_fc, fc);
putnn(cmdp->cpb, in_histlen, 0 ); /* resuming with no history */
memset((void *) &cmdp->crb.csb, 0 , sizeof (cmdp->crb.csb));
/* Section 6.6 programming notes; spbc may be in two different
* places depending on FC .
*/
if (!with_count)
put32(cmdp->cpb, out_spbc_comp, 0 );
else
put32(cmdp->cpb, out_spbc_comp_with_count, 0 );
/* Figure 6-3 6-4; CSB location */
put64(cmdp->crb, csb_address, 0 );
put64(cmdp->crb, csb_address,
(uint64_t) &cmdp->crb.csb & csb_address_mask);
/* Source direct dde (scatter-gather list) */
clear_dde(cmdp->crb.source_dde);
putnn(cmdp->crb.source_dde, dde_count, 0 );
put32(cmdp->crb.source_dde, ddebc, srclen);
put64(cmdp->crb.source_dde, ddead, (uint64_t) src);
/* Target direct dde (scatter-gather list) */
clear_dde(cmdp->crb.target_dde);
putnn(cmdp->crb.target_dde, dde_count, 0 );
put32(cmdp->crb.target_dde, ddebc, dstlen);
put64(cmdp->crb.target_dde, ddead, (uint64_t) dst);
/* Submit the crb, the job descriptor, to the accelerator */
return nxu_submit_job(cmdp, handle);
}
/*
* Prepares a blank no filename no timestamp gzip header and returns
* the number of bytes written to buf .
* Gzip specification at https : //tools.ietf.org/html/rfc1952
*/
int gzip_header_blank(char *buf)
{
int i = 0 ;
buf[i++] = 0 x1f; /* ID1 */
buf[i++] = 0 x8b; /* ID2 */
buf[i++] = 0 x08; /* CM */
buf[i++] = 0 x00; /* FLG */
buf[i++] = 0 x00; /* MTIME */
buf[i++] = 0 x00; /* MTIME */
buf[i++] = 0 x00; /* MTIME */
buf[i++] = 0 x00; /* MTIME */
buf[i++] = 0 x04; /* XFL 4=fastest */
buf[i++] = 0 x03; /* OS UNIX */
return i;
}
/*
* Z_SYNC_FLUSH as described in zlib . h .
* Returns number of appended bytes
*/
int append_sync_flush(char *buf, int tebc, int final)
{
uint64_t flush;
int shift = (tebc & 0 x7);
if (tebc > 0 ) {
/* Last byte is partially full */
buf = buf - 1 ;
*buf = *buf & (unsigned char ) ((1 <<tebc)-1 );
} else
*buf = 0 ;
flush = ((0 x1ULL & final) << shift) | *buf;
shift = shift + 3 ; /* BFINAL and BTYPE written */
shift = (shift <= 8 ) ? 8 : 16 ;
flush |= (0 xFFFF0000ULL) << shift; /* Zero length block */
shift = shift + 32 ;
while (shift > 0 ) {
*buf++ = (unsigned char ) (flush & 0 xffULL);
flush = flush >> 8 ;
shift = shift - 8 ;
}
return (((tebc > 5 ) || (tebc == 0 )) ? 5 : 4 );
}
/*
* Final deflate block bit . This call assumes the block
* beginning is byte aligned .
*/
static void set_bfinal(void *buf, int bfinal)
{
char *b = buf;
if (bfinal)
*b = *b | (unsigned char ) 0 x01;
else
*b = *b & (unsigned char ) 0 xfe;
}
int compress_file(int argc, char **argv, void *handle)
{
char *inbuf, *outbuf, *srcbuf, *dstbuf;
char outname[FNAME_MAX];
uint32_t srclen, dstlen;
uint32_t flushlen, chunk;
size_t inlen, outlen, dsttotlen, srctotlen;
uint32_t crc, spbc, tpbc, tebc;
int lzcounts = 0 ;
int cc;
int num_hdr_bytes;
struct nx_gzip_crb_cpb_t *cmdp;
uint32_t pagelen = 65536 ;
int fault_tries = NX_MAX_FAULTS;
char buf[32 ];
cmdp = (void *)(uintptr_t)
aligned_alloc(sizeof (struct nx_gzip_crb_cpb_t),
sizeof (struct nx_gzip_crb_cpb_t));
if (argc != 2 ) {
fprintf(stderr, "usage: %s <fname>\n" , argv[0 ]);
exit (-1 );
}
if (read_file_alloc(argv[1 ], &inbuf, &inlen))
exit (-1 );
fprintf(stderr, "file %s read, %ld bytes\n" , argv[1 ], inlen);
/* Generous output buffer for header/trailer */
outlen = 2 * inlen + 1024 ;
assert(NULL != (outbuf = (char *)malloc(outlen)));
nxu_touch_pages(outbuf, outlen, pagelen, 1 );
/*
* On PowerVM , the hypervisor defines the maximum request buffer
* size is defined and this value is available via sysfs .
*/
if (!read_sysfs_file(SYSFS_MAX_REQ_BUF_PATH, buf, sizeof (buf))) {
chunk = atoi(buf);
} else {
/* sysfs entry is not available on PowerNV */
/* Compress piecemeal in smallish chunks */
chunk = 1 <<22 ;
}
/* Write the gzip header to the stream */
num_hdr_bytes = gzip_header_blank(outbuf);
dstbuf = outbuf + num_hdr_bytes;
outlen = outlen - num_hdr_bytes;
dsttotlen = num_hdr_bytes;
srcbuf = inbuf;
srctotlen = 0 ;
/* Init the CRB, the coprocessor request block */
memset(&cmdp->crb, 0 , sizeof (cmdp->crb));
/* Initial gzip crc32 */
put32(cmdp->cpb, in_crc, 0 );
while (inlen > 0 ) {
/* Submit chunk size source data per job */
srclen = NX_MIN(chunk, inlen);
/* Supply large target in case data expands */
dstlen = NX_MIN(2 *srclen, outlen);
/* Page faults are handled by the user code */
/* Fault-in pages; an improved code wouldn't touch so
* many pages but would try to estimate the
* compression ratio and adjust both the src and dst
* touch amounts .
*/
nxu_touch_pages(cmdp, sizeof (struct nx_gzip_crb_cpb_t), pagelen,
1 );
nxu_touch_pages(srcbuf, srclen, pagelen, 0 );
nxu_touch_pages(dstbuf, dstlen, pagelen, 1 );
cc = compress_fht_sample(
srcbuf, srclen,
dstbuf, dstlen,
lzcounts, cmdp, handle);
if (cc != ERR_NX_OK && cc != ERR_NX_TPBC_GT_SPBC &&
cc != ERR_NX_AT_FAULT) {
fprintf(stderr, "nx error: cc= %d\n" , cc);
exit (-1 );
}
/* Page faults are handled by the user code */
if (cc == ERR_NX_AT_FAULT) {
NXPRT(fprintf(stderr, "page fault: cc= %d, " , cc));
NXPRT(fprintf(stderr, "try= %d, fsa= %08llx\n" ,
fault_tries,
(unsigned long long ) cmdp->crb.csb.fsaddr));
fault_tries--;
if (fault_tries > 0 ) {
continue ;
} else {
fprintf(stderr, "error: cannot progress; " );
fprintf(stderr, "too many faults\n" );
exit (-1 );
}
}
fault_tries = NX_MAX_FAULTS; /* Reset for the next chunk */
inlen = inlen - srclen;
srcbuf = srcbuf + srclen;
srctotlen = srctotlen + srclen;
/* Two possible locations for spbc depending on the function
* code .
*/
spbc = (!lzcounts) ? get32(cmdp->cpb, out_spbc_comp) :
get32(cmdp->cpb, out_spbc_comp_with_count);
assert(spbc == srclen);
/* Target byte count */
tpbc = get32(cmdp->crb.csb, tpbc);
/* Target ending bit count */
tebc = getnn(cmdp->cpb, out_tebc);
NXPRT(fprintf(stderr, "compressed chunk %d " , spbc));
NXPRT(fprintf(stderr, "to %d bytes, tebc= %d\n" , tpbc, tebc));
if (inlen > 0 ) { /* More chunks to go */
set_bfinal(dstbuf, 0 );
dstbuf = dstbuf + tpbc;
dsttotlen = dsttotlen + tpbc;
outlen = outlen - tpbc;
/* Round up to the next byte with a flush
* block ; do not set the BFINAqL bit .
*/
flushlen = append_sync_flush(dstbuf, tebc, 0 );
dsttotlen = dsttotlen + flushlen;
outlen = outlen - flushlen;
dstbuf = dstbuf + flushlen;
NXPRT(fprintf(stderr, "added sync_flush %d bytes\n" ,
flushlen));
} else { /* Done */
/* Set the BFINAL bit of the last block per Deflate
* specification .
*/
set_bfinal(dstbuf, 1 );
dstbuf = dstbuf + tpbc;
dsttotlen = dsttotlen + tpbc;
outlen = outlen - tpbc;
}
/* Resuming crc32 for the next chunk */
crc = get32(cmdp->cpb, out_crc);
put32(cmdp->cpb, in_crc, crc);
crc = be32toh(crc);
}
/* Append crc32 and ISIZE to the end */
memcpy(dstbuf, &crc, 4 );
memcpy(dstbuf+4 , &srctotlen, 4 );
dsttotlen = dsttotlen + 8 ;
outlen = outlen - 8 ;
assert(FNAME_MAX > (strlen(argv[1 ]) + strlen(FEXT)));
strcpy(outname, argv[1 ]);
strcat(outname, FEXT);
if (write_file(outname, outbuf, dsttotlen)) {
fprintf(stderr, "write error: %s\n" , outname);
exit (-1 );
}
fprintf(stderr, "compressed %ld to %ld bytes total, " , srctotlen,
dsttotlen);
fprintf(stderr, "crc32 checksum = %08x\n" , crc);
if (inbuf != NULL)
free(inbuf);
if (outbuf != NULL)
free(outbuf);
return 0 ;
}
int main(int argc, char **argv)
{
int rc;
struct sigaction act;
void *handle;
nx_dbg = 0 ;
nx_gzip_log = NULL;
act.sa_handler = 0 ;
act.sa_sigaction = nxu_sigsegv_handler;
act.sa_flags = SA_SIGINFO;
act.sa_restorer = 0 ;
sigemptyset(&act.sa_mask);
sigaction(SIGSEGV, &act, NULL);
handle = nx_function_begin(NX_FUNC_COMP_GZIP, 0 );
if (!handle) {
fprintf(stderr, "Unable to init NX, errno %d\n" , errno);
exit (-1 );
}
rc = compress_file(argc, argv, handle);
nx_function_end(handle);
return rc;
}
Messung V0.5 in Prozent C=88 H=96 G=91
¤ Dauer der Verarbeitung: 0.9 Sekunden
(vorverarbeitet am 2026-10-12)
¤
*© Formatika GbR, Deutschland