Quelle  yts806.cob   Sprache: Cobol

       IDENTIFICATION DIVISION.
       PROGRAM-ID.  YTS806.
       ENVIRONMENT DIVISION.
       CONFIGURATION SECTION.
       SOURCE-COMPUTER.  xyz.
       OBJECT-COMPUTER.  xyz.
       DATA DIVISION.
       WORKING-STORAGE SECTION.


      * EMBEDDED COBOL (file "YTS806.PCO")


      *Copyright 1996 National Computing Centre Ltd, 
      *and Computer Logic R&D S.A 
      *on behalf of CTS5 SQL2 Project. 
      *All rights reserved.                                          
      *The CTS5 SQL2 Project is sponsored by the European Community. 
      *                                                             
      *The National Computing Centre Limited and Computer Logic R&D  
      *have given permission to NIST to distribute this program      
      *over the World Wide Web in order to promote SQL standards.    
      *DISCLAIMER:                                                   
      *This program was reviewed by employees of NIST for            
      *conformance to the SQL standards.                             
      *NIST assumes no responsibility for any party's use of         
      *this program.                                                 


      ****************************************************************
      *                                                              
      *                 COMMENT SECTION                              
      *                                                              
      * SQL VALIDATION TEST SUITE V6.0                               
      *                                                              
      * YTS806.PCO                                                   
      * WRITTEN BY:  Susan Watters                                   
      * TRANSLATED AUTOMATICALLY FROM EMBEDDED C BY CHRIS SCHANZLE
      *                                                              
      * This routine tests NATURAL FULL OUTER JOIN <table ref> -     
      *                    dynamic                                   
      *                                                              
      *                                                              
      * REFERENCES                                                   
      *   7.5      <joined table>                                    
      *   7.5 SR.6                                                   
      *   7.5 GR.1d                                                  
      *   7.5 GR.5d                                                  
      *   7.5 GR.6a                                                  
      *   17.1     Description of SQL item descriptor areas          
      *   17.2     <allocate descriptor statement>                   
      *   17.3     <deallocate descriptor statement>                 
      *   17.4     <get descriptor statement>                        
      *   17.6     <prepare statement>                               
      *   17.7     <deallocate prepared statement>                   
      *   17.8     <describe statement>                              
      *   17.9     <using clause>                                    
      *   17.12    <dynamic declare cursor>                          
      *   17.14    <dynamic open statement>                          
      *   17.15    <dynamic fetch statement>                         
      *   17.16    <dynamic close statement>                         
      *   F#4      Joined table                                      
      *   F#40     Full outer join                                   
      *   F#1      Dynamic SQL                                       
      *                                                              
      * DATE LAST ALTERED 02.01.96 CTS5 Hand-over Test               
      *                                                              
      * QA Status: Full FC                                           
      *                                                              
      * Revised by DWF 1996-03-27                                    
      *   Added rollback after authid                                
      *   Removed EXEC SQL from printf                               
      *   Renamed variables                                          
      *   Fixed coding rule violations                               
      *   Fixed syntax errors                                        
      *   Fixed descriptor usage                                     
      *   Fixed string lengths                                       
      *   Fixed printout                                             
      *   Fixed expected results                                     
      ****************************************************************




           EXEC SQL BEGIN DECLARE SECTION END-EXEC
       01  SQLCODE PIC S9(9) COMP.
       01  SQLSTATE PIC  X(5).
       01  colnam PIC  X(20).
       01  coltyp PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  eno PIC  X(3).
       01  enaam PIC  X(20).
       01  grd PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  cit PIC  X(15).
       01  hrs PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  sal PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  pno PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  indic1 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  indic2 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  indic3 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  uid PIC  X(18).
       01  uidx PIC  X(18).
       01  longst PIC  X(240).
             EXEC SQL END DECLARE SECTION END-EXEC
       01  norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  ALPNUM-TABLE VALUE IS
               "01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
           05  ALPNUM PIC X OCCURS 36 TIMES.
       01  NORMSQ.
           05  NORMSQX PIC X OCCURS 5 TIMES.
       01  errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
      *date_time declaration 
       01  TO-DAY PIC 9(6).
       01  THE-TIME PIC 9(8).
       01  flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       01  SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       PROCEDURE DIVISION.
       P0.

             MOVE "CTS1 " TO uid
             CALL "AUTHID" USING uid
             MOVE "not logged in, not" TO uidx
             EXEC SQL SELECT USER INTO :uidx FROM CTS1.ECCO END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL ROLLBACK WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
             if (uid  NOT  =   uidx) then
               DISPLAY "ERROR: User ", uid, " expected. User ", uidx, "
      -    " connected"
            STOP RUN
             END-IF
             MOVE 0 TO errcnt

             DISPLAY "SQL Test Suite, V6.0, Embedded COBOL, yts806.pco"
             DISPLAY
           "59-byte ID"
             DISPLAY "TEd Version #"
      *date_time print 
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME

      ******************** BEGIN TEST7563 *******************
             MOVE 1 TO flag

             DISPLAY " TEST7563 "
             DISPLAY " NATURAL FULL OUTER JOIN - dynamic"
             DISPLAY "References:"
             DISPLAY " 7.5 "
             DISPLAY " 7.5 SR.6"
             DISPLAY " 7.5 GR.1d"
             DISPLAY " 7.5 GR.5d"
             DISPLAY " 7.5 GR.6a"
             DISPLAY " 17.1 Description of SQL item descriptor
      -    " areas"
             DISPLAY " 17.2 "
             DISPLAY " 17.3 "
             DISPLAY " 17.4 "
             DISPLAY " 17.6 "
             DISPLAY " 17.7 "
             DISPLAY " 17.8 "
             DISPLAY " 17.9 "
             DISPLAY " 17.12 "
             DISPLAY " 17.14 "
             DISPLAY " 17.15 "
             DISPLAY " 17.16 "
             DISPLAY " F#4 Joined table."
             DISPLAY " F#40 Full outer join."
             DISPLAY " F#1 Dynamic SQL."
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE

      *prepare database 

             DISPLAY "DELETE FROM CTS1.STAFF1;"
             EXEC SQL DELETE FROM CTS1.STAFF1 END-EXEC
             MOVE SQLCODE TO SQL-COD
             DISPLAY "DELETE FROM CTS1.STAFFa;"
             EXEC SQL DELETE FROM CTS1.STAFFa END-EXEC
             MOVE SQLCODE TO SQL-COD

             DISPLAY "INSERT INTO CTS1.STAFF1 VALUES"
             DISPLAY "('E1','Alice',4,'Lyon');"
             EXEC SQL INSERT INTO CTS1.STAFF1 VALUES
               ('E1','Alice',4,'Lyon') END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "INSERT INTO CTS1.STAFF1 VALUES"
             DISPLAY "('E1','Alice',8,'Lyon');"
             EXEC SQL INSERT INTO CTS1.STAFF1 VALUES
               ('E1','Alice',8,'Lyon') END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "INSERT INTO CTS1.STAFF1 VALUES"
             DISPLAY "('E1','Alice',12,'Geneva');"
             EXEC SQL INSERT INTO CTS1.STAFF1 VALUES
               ('E1','Alice',12,'Geneva') END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "INSERT INTO CTS1.STAFF1 VALUES"
             DISPLAY "('E2','Betty',16,'Strasbourg');"
             EXEC SQL INSERT INTO CTS1.STAFF1 VALUES
               ('E2','Betty',16,'Strasbourg') END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "INSERT INTO CTS1.STAFF1 VALUES"
             DISPLAY "('E2','Betty',20,'Munich');"
             EXEC SQL INSERT INTO CTS1.STAFF1 VALUES
               ('E2','Betty',20,'Munich') END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "INSERT INTO CTS1.STAFF1 VALUES"
             DISPLAY "('E3','Colin',24,'Leuven');"
             EXEC SQL INSERT INTO CTS1.STAFF1 VALUES
               ('E3','Colin',24,'Leuven') END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "INSERT INTO CTS1.STAFF1 VALUES"
             DISPLAY "('E4','Daniel',28,'Cologne');"
             EXEC SQL INSERT INTO CTS1.STAFF1 VALUES
               ('E4','Daniel',28,'Cologne') END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "INSERT INTO CTS1.STAFFa VALUES"
             DISPLAY "(20,40000,'E1',11,'Alice');"
             EXEC SQL INSERT INTO CTS1.STAFFa VALUES
               (20,40000,'E1',11,'Alice') END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "INSERT INTO CTS1.STAFFa VALUES"
             DISPLAY "(15,20000,'E2',12,'Betty');"
             EXEC SQL INSERT INTO CTS1.STAFFa VALUES
               (15,20000,'E2',12,'Betty') END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "INSERT INTO CTS1.STAFFa VALUES"
             DISPLAY "(15,20000,'E2',13,'Betty');"
             EXEC SQL INSERT INTO CTS1.STAFFa VALUES
               (15,20000,'E2',13,'Betty') END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "INSERT INTO CTS1.STAFFa VALUES"
             DISPLAY "(10,15000,'E3',14,'Colin');"
             EXEC SQL INSERT INTO CTS1.STAFFa VALUES
               (10,15000,'E3',14,'Colin') END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "INSERT INTO CTS1.STAFFa VALUES"
             DISPLAY "(10,8000,'E3',15,'Colin');"
             EXEC SQL INSERT INTO CTS1.STAFFa VALUES
               (10,8000,'E3',15,'Colin') END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "INSERT INTO CTS1.STAFFa VALUES"
             DISPLAY "(10,8000,'E3',16,'Colin');"
             EXEC SQL INSERT INTO CTS1.STAFFa VALUES
               (10,8000,'E3',16,'Colin') END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "INSERT INTO CTS1.STAFFa VALUES"
             DISPLAY "(30,50000,'E5',17,'Edward');"
             EXEC SQL INSERT INTO CTS1.STAFFa VALUES
               (30,50000,'E5',17,'Edward') END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             EXEC SQL DELETE FROM CTS1.CONCATBUF END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL INSERT INTO CTS1.CONCATBUF VALUES (
               'SELECT * FROM STAFF1 NATURAL FULL OUTER JOIN' ||
               ' STAFFA ORDER BY EMPNUM, EMPNAME, GRADE, PNUM'
               ) END-EXEC
             MOVE SQLCODE TO SQL-COD
             EXEC SQL SELECT ZZ INTO :longst FROM CTS1.CONCATBUF
             END-EXEC
             MOVE SQLCODE TO SQL-COD
             DISPLAY "longst=""", longst, """"


             DISPLAY "PREPARE sn FROM :longst;"
             EXEC SQL PREPARE sn FROM :longst END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

      *Demand that they be able to allocate at least 7.  This is an 
      *Intermediate test, so their descriptors have no excuse to be 
      *wimpy. 

             DISPLAY "ALLOCATE DESCRIPTOR 'dn' WITH MAX 7;"
             EXEC SQL ALLOCATE DESCRIPTOR 'dn' WITH MAX 7 END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "DESCRIBE sn USING SQL DESCRIPTOR 'dn';"
             EXEC SQL DESCRIBE sn USING SQL DESCRIPTOR 'dn' END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             MOVE "xxxxxxxxxxxxxxxxxxxx" TO colnam
             MOVE 0 TO coltyp
             DISPLAY "GET DESCRIPTOR 'dn' VALUE 1 :colnam = NAME,
      -    " :coltyp = TYPE;"
             EXEC SQL GET DESCRIPTOR 'dn' VALUE 1 :colnam = NAME,
             :coltyp = TYPE END-EXEC
             MOVE SQLCODE TO SQL-COD
             DISPLAY "colnam should be EMPNUM; its value is ", colnam
             DISPLAY "coltyp should be 1 (CHAR); its value is ", coltyp
             if (colnam  NOT  =   "EMPNUM"  OR  coltyp  NOT =  1) then
               MOVE 0 TO flag
             END-IF

             MOVE "xxxxxxxxxxxxxxxxxxxx" TO colnam
             MOVE 0 TO coltyp
             DISPLAY "GET DESCRIPTOR 'dn' VALUE 2 :colnam = NAME,
      -    " :coltyp = TYPE;"
             EXEC SQL GET DESCRIPTOR 'dn' VALUE 2 :colnam = NAME,
             :coltyp = TYPE END-EXEC
             MOVE SQLCODE TO SQL-COD
             DISPLAY "colnam should be EMPNAME; its value is ", colnam
             DISPLAY "coltyp should be 1 (CHAR); its value is ", coltyp
             if (colnam  NOT  =   "EMPNAME"  OR  coltyp  NOT =  1) then
               MOVE 0 TO flag
             END-IF

             MOVE "xxxxxxxxxxxxxxxxxxxx" TO colnam
             MOVE 0 TO coltyp
             DISPLAY "GET DESCRIPTOR 'dn' VALUE 3 :colnam = NAME,
      -    " :coltyp = TYPE;"
             EXEC SQL GET DESCRIPTOR 'dn' VALUE 3 :colnam = NAME,
             :coltyp = TYPE END-EXEC
             MOVE SQLCODE TO SQL-COD
             DISPLAY "colnam should be GRADE; its value is ", colnam
             DISPLAY "coltyp should be 3 (DECIMAL); its value is ",
             coltyp
             if (colnam  NOT  =   "GRADE"  OR  coltyp  NOT =  3) then
               MOVE 0 TO flag
             END-IF

             MOVE "xxxxxxxxxxxxxxxxxxxx" TO colnam
             MOVE 0 TO coltyp
             DISPLAY "GET DESCRIPTOR 'dn' VALUE 4 :colnam = NAME,
      -    " :coltyp = TYPE;"
             EXEC SQL GET DESCRIPTOR 'dn' VALUE 4 :colnam = NAME,
             :coltyp = TYPE END-EXEC
             MOVE SQLCODE TO SQL-COD
             DISPLAY "colnam should be CITY; its value is ", colnam
             DISPLAY "coltyp should be 1 (CHAR); its value is ", coltyp
             if (colnam  NOT  =   "CITY"  OR  coltyp  NOT =  1) then
               MOVE 0 TO flag
             END-IF

             MOVE "xxxxxxxxxxxxxxxxxxxx" TO colnam
             MOVE 0 TO coltyp
             DISPLAY "GET DESCRIPTOR 'dn' VALUE 5 :colnam = NAME,
      -    " :coltyp = TYPE;"
             EXEC SQL GET DESCRIPTOR 'dn' VALUE 5 :colnam = NAME,
             :coltyp = TYPE END-EXEC
             MOVE SQLCODE TO SQL-COD
             DISPLAY "colnam should be HOURS; its value is ", colnam
             DISPLAY "coltyp should be 4 (INT); its value is ", coltyp
             if (colnam  NOT  =   "HOURS"  OR  coltyp  NOT =  4) then
               MOVE 0 TO flag
             END-IF

             MOVE "xxxxxxxxxxxxxxxxxxxx" TO colnam
             MOVE 0 TO coltyp
             DISPLAY "GET DESCRIPTOR 'dn' VALUE 6 :colnam = NAME,
      -    " :coltyp = TYPE;"
             EXEC SQL GET DESCRIPTOR 'dn' VALUE 6 :colnam = NAME,
             :coltyp = TYPE END-EXEC
             MOVE SQLCODE TO SQL-COD
             DISPLAY "colnam should be SALARY; its value is ", colnam
             DISPLAY "coltyp should be 3 (DECIMAL); its value is ",
             coltyp
             if (colnam  NOT  =   "SALARY"  OR  coltyp  NOT =  3) then
               MOVE 0 TO flag
             END-IF

             MOVE "xxxxxxxxxxxxxxxxxxxx" TO colnam
             MOVE 0 TO coltyp
             DISPLAY "GET DESCRIPTOR 'dn' VALUE 7 :colnam = NAME,
      -    " :coltyp = TYPE;"
             EXEC SQL GET DESCRIPTOR 'dn' VALUE 7 :colnam = NAME,
             :coltyp = TYPE END-EXEC
             MOVE SQLCODE TO SQL-COD
             DISPLAY "colnam should be PNUM; its value is ", colnam
             DISPLAY "coltyp should be 3 (DECIMAL); its value is ",
             coltyp
             if (colnam  NOT  =   "PNUM"  OR  coltyp  NOT =  3) then
               MOVE 0 TO flag
             END-IF

      *execute a <dynamic declare cursor> for statement sn 

             DISPLAY "DECLARE cn CURSOR for sn;"
             EXEC SQL DECLARE cn CURSOR FOR sn END-EXEC

             DISPLAY "OPEN cn;"
             EXEC SQL OPEN cn END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

      *Return each row defined by the cursor 

             MOVE "xxx" TO eno
             MOVE "xxxxxxxxxxxxxxxxxxxx" TO enaam
             COMPUTE grd = -1
             MOVE "xxxxxxxxxxxxxxx" TO cit
             COMPUTE hrs = -1
             COMPUTE sal = -1
             COMPUTE pno = -1
             DISPLAY "FETCH cn INTO :eno, :enaam, :grd, :cit, :hrs,
      -    " :sal, :pno;"
             EXEC SQL FETCH cn INTO 
               :eno, :enaam, :grd, :cit, :hrs, :sal, :pno END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "eno should be E1; its value is ", eno
             DISPLAY "enaam should be Alice; its value is ", enaam
             DISPLAY "grd should be 4; its value is ", grd
             DISPLAY "cit should be Lyon; its value is ", cit
             DISPLAY "hrs should be 20; its value is ", hrs
             DISPLAY "sal should be 40000; its value is ", sal
             DISPLAY "pno should be 11; its value is ", pno
             if (eno  NOT  =   "E1"  OR  enaam  NOT  =   "Alice"  OR 
             grd  NOT =  4) then
               MOVE 0 TO flag
             END-IF
             if (cit  NOT  =   "Lyon"  OR  hrs  NOT =  20  OR  sal  NOT
             =  40000) then
               MOVE 0 TO flag
             END-IF
             if (pno  NOT =  11) then
               MOVE 0 TO flag
             END-IF

             MOVE "xxx" TO eno
             MOVE "xxxxxxxxxxxxxxxxxxxx" TO enaam
             COMPUTE grd = -1
             MOVE "xxxxxxxxxxxxxxx" TO cit
             COMPUTE hrs = -1
             COMPUTE sal = -1
             COMPUTE pno = -1
             DISPLAY "FETCH cn INTO :eno, :enaam, :grd, :cit, :hrs,
      -    " :sal, :pno;"
             EXEC SQL FETCH cn INTO 
               :eno, :enaam, :grd, :cit, :hrs, :sal, :pno END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "eno should be E1; its value is ", eno
             DISPLAY "enaam should be Alice; its value is ", enaam
             DISPLAY "grd should be 8; its value is ", grd
             DISPLAY "cit should be Lyon; its value is ", cit
             DISPLAY "hrs should be 20; its value is ", hrs
             DISPLAY "sal should be 40000; its value is ", sal
             DISPLAY "pno should be 11; its value is ", pno
             if (eno  NOT  =   "E1"  OR  enaam  NOT  =   "Alice"  OR 
             grd  NOT =  8) then
               MOVE 0 TO flag
             END-IF
             if (cit  NOT  =   "Lyon"  OR  hrs  NOT =  20  OR  sal  NOT
             =  40000) then
               MOVE 0 TO flag
             END-IF
             if (pno  NOT =  11) then
               MOVE 0 TO flag
             END-IF

             MOVE "xxx" TO eno
             MOVE "xxxxxxxxxxxxxxxxxxxx" TO enaam
             COMPUTE grd = -1
             MOVE "xxxxxxxxxxxxxxx" TO cit
             COMPUTE hrs = -1
             COMPUTE sal = -1
             COMPUTE pno = -1
             DISPLAY "FETCH cn INTO :eno, :enaam, :grd, :cit, :hrs,
      -    " :sal, :pno;"
             EXEC SQL FETCH cn INTO 
               :eno, :enaam, :grd, :cit, :hrs, :sal, :pno END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "eno should be E1; its value is ", eno
             DISPLAY "enaam should be Alice; its value is ", enaam
             DISPLAY "grd should be 12; its value is ", grd
             DISPLAY "cit should be Geneva; its value is ", cit
             DISPLAY "hrs should be 20; its value is ", hrs
             DISPLAY "sal should be 40000; its value is ", sal
             DISPLAY "pno should be 11; its value is ", pno
             if (eno  NOT  =   "E1"  OR  enaam  NOT  =   "Alice"  OR 
             grd  NOT =  12) then
               MOVE 0 TO flag
             END-IF
             if (cit  NOT  =   "Geneva"  OR  hrs  NOT =  20  OR  sal 
             NOT =  40000) then
               MOVE 0 TO flag
             END-IF
             if (pno  NOT =  11) then
               MOVE 0 TO flag
             END-IF

             MOVE "xxx" TO eno
             MOVE "xxxxxxxxxxxxxxxxxxxx" TO enaam
             COMPUTE grd = -1
             MOVE "xxxxxxxxxxxxxxx" TO cit
             COMPUTE hrs = -1
             COMPUTE sal = -1
             COMPUTE pno = -1
             DISPLAY "FETCH cn INTO :eno, :enaam, :grd, :cit, :hrs,
      -    " :sal, :pno;"
             EXEC SQL FETCH cn INTO 
               :eno, :enaam, :grd, :cit, :hrs, :sal, :pno END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "eno should be E2; its value is ", eno
             DISPLAY "enaam should be Betty; its value is ", enaam
             DISPLAY "grd should be 16; its value is ", grd
             DISPLAY "cit should be Strasbourg; its value is ", cit
             DISPLAY "hrs should be 15; its value is ", hrs
             DISPLAY "sal should be 20000; its value is ", sal
             DISPLAY "pno should be 12; its value is ", pno
             if (eno  NOT  =   "E2"  OR  enaam  NOT  =   "Betty"  OR 
             grd  NOT =  16) then
               MOVE 0 TO flag
             END-IF
             if (cit  NOT  =   "Strasbourg"  OR  hrs  NOT =  15  OR  sal
              NOT =  20000) then
               MOVE 0 TO flag
             END-IF
             if (pno  NOT =  12) then
               MOVE 0 TO flag
             END-IF

             MOVE "xxx" TO eno
             MOVE "xxxxxxxxxxxxxxxxxxxx" TO enaam
             COMPUTE grd = -1
             MOVE "xxxxxxxxxxxxxxx" TO cit
             COMPUTE hrs = -1
             COMPUTE sal = -1
             COMPUTE pno = -1
             DISPLAY "FETCH cn INTO :eno, :enaam, :grd, :cit, :hrs,
      -    " :sal, :pno;"
             EXEC SQL FETCH cn INTO 
               :eno, :enaam, :grd, :cit, :hrs, :sal, :pno END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "eno should be E2; its value is ", eno
             DISPLAY "enaam should be Betty; its value is ", enaam
             DISPLAY "grd should be 16; its value is ", grd
             DISPLAY "cit should be Strasbourg; its value is ", cit
             DISPLAY "hrs should be 15; its value is ", hrs
             DISPLAY "sal should be 20000; its value is ", sal
             DISPLAY "pno should be 13; its value is ", pno
             if (eno  NOT  =   "E2"  OR  enaam  NOT  =   "Betty"  OR 
             grd  NOT =  16) then
               MOVE 0 TO flag
             END-IF
             if (cit  NOT  =   "Strasbourg"  OR  hrs  NOT =  15  OR  sal
              NOT =  20000) then
               MOVE 0 TO flag
             END-IF
             if (pno  NOT =  13) then
               MOVE 0 TO flag
             END-IF

             MOVE "xxx" TO eno
             MOVE "xxxxxxxxxxxxxxxxxxxx" TO enaam
             COMPUTE grd = -1
             MOVE "xxxxxxxxxxxxxxx" TO cit
             COMPUTE hrs = -1
             COMPUTE sal = -1
             COMPUTE pno = -1
             DISPLAY "FETCH cn INTO :eno, :enaam, :grd, :cit, :hrs,
      -    " :sal, :pno;"
             EXEC SQL FETCH cn INTO 
               :eno, :enaam, :grd, :cit, :hrs, :sal, :pno END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "eno should be E2; its value is ", eno
             DISPLAY "enaam should be Betty; its value is ", enaam
             DISPLAY "grd should be 20; its value is ", grd
             DISPLAY "cit should be Munich; its value is ", cit
             DISPLAY "hrs should be 15; its value is ", hrs
             DISPLAY "sal should be 20000; its value is ", sal
             DISPLAY "pno should be 12; its value is ", pno
             if (eno  NOT  =   "E2"  OR  enaam  NOT  =   "Betty"  OR 
             grd  NOT =  20) then
               MOVE 0 TO flag
             END-IF
             if (cit  NOT  =   "Munich"  OR  hrs  NOT =  15  OR  sal 
             NOT =  20000) then
               MOVE 0 TO flag
             END-IF
             if (pno  NOT =  12) then
               MOVE 0 TO flag
             END-IF

             MOVE "xxx" TO eno
             MOVE "xxxxxxxxxxxxxxxxxxxx" TO enaam
             COMPUTE grd = -1
             MOVE "xxxxxxxxxxxxxxx" TO cit
             COMPUTE hrs = -1
             COMPUTE sal = -1
             COMPUTE pno = -1
             DISPLAY "FETCH cn INTO :eno, :enaam, :grd, :cit, :hrs,
      -    " :sal, :pno;"
             EXEC SQL FETCH cn INTO 
               :eno, :enaam, :grd, :cit, :hrs, :sal, :pno END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "eno should be E2; its value is ", eno
             DISPLAY "enaam should be Betty; its value is ", enaam
             DISPLAY "grd should be 20; its value is ", grd
             DISPLAY "cit should be Munich; its value is ", cit
             DISPLAY "hrs should be 15; its value is ", hrs
             DISPLAY "sal should be 20000; its value is ", sal
             DISPLAY "pno should be 13; its value is ", pno
             if (eno  NOT  =   "E2"  OR  enaam  NOT  =   "Betty"  OR 
             grd  NOT =  20) then
               MOVE 0 TO flag
             END-IF
             if (cit  NOT  =   "Munich"  OR  hrs  NOT =  15  OR  sal 
             NOT =  20000) then
               MOVE 0 TO flag
             END-IF
             if (pno  NOT =  13) then
               MOVE 0 TO flag
             END-IF

             MOVE "xxx" TO eno
             MOVE "xxxxxxxxxxxxxxxxxxxx" TO enaam
             COMPUTE grd = -1
             MOVE "xxxxxxxxxxxxxxx" TO cit
             COMPUTE hrs = -1
             COMPUTE sal = -1
             COMPUTE pno = -1
             DISPLAY "FETCH cn INTO :eno, :enaam, :grd, :cit, :hrs,
      -    " :sal, :pno;"
             EXEC SQL FETCH cn INTO 
               :eno, :enaam, :grd, :cit, :hrs, :sal, :pno END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "eno should be E3; its value is ", eno
             DISPLAY "enaam should be Colin; its value is ", enaam
             DISPLAY "grd should be 24; its value is ", grd
             DISPLAY "cit should be Leuven; its value is ", cit
             DISPLAY "hrs should be 10; its value is ", hrs
             DISPLAY "sal should be 15000; its value is ", sal
             DISPLAY "pno should be 14; its value is ", pno
             if (eno  NOT  =   "E3"  OR  enaam  NOT  =   "Colin"  OR 
             grd  NOT =  24) then
               MOVE 0 TO flag
             END-IF
             if (cit  NOT  =   "Leuven"  OR  hrs  NOT =  10  OR  sal 
             NOT =  15000) then
               MOVE 0 TO flag
             END-IF
             if (pno  NOT =  14) then
               MOVE 0 TO flag
             END-IF

             MOVE "xxx" TO eno
             MOVE "xxxxxxxxxxxxxxxxxxxx" TO enaam
             COMPUTE grd = -1
             MOVE "xxxxxxxxxxxxxxx" TO cit
             COMPUTE hrs = -1
             COMPUTE sal = -1
             COMPUTE pno = -1
             DISPLAY "FETCH cn INTO :eno, :enaam, :grd, :cit, :hrs,
      -    " :sal, :pno;"
             EXEC SQL FETCH cn INTO 
               :eno, :enaam, :grd, :cit, :hrs, :sal, :pno END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "eno should be E3; its value is ", eno
             DISPLAY "enaam should be Colin; its value is ", enaam
             DISPLAY "grd should be 24; its value is ", grd
             DISPLAY "cit should be Leuven; its value is ", cit
             DISPLAY "hrs should be 10; its value is ", hrs
             DISPLAY "sal should be 8000; its value is ", sal
             DISPLAY "pno should be 15; its value is ", pno
             if (eno  NOT  =   "E3"  OR  enaam  NOT  =   "Colin"  OR 
             grd  NOT =  24) then
               MOVE 0 TO flag
             END-IF
             if (cit  NOT  =   "Leuven"  OR  hrs  NOT =  10  OR  sal 
             NOT =  8000) then
               MOVE 0 TO flag
             END-IF
             if (pno  NOT =  15) then
               MOVE 0 TO flag
             END-IF

             MOVE "xxx" TO eno
             MOVE "xxxxxxxxxxxxxxxxxxxx" TO enaam
             COMPUTE grd = -1
             MOVE "xxxxxxxxxxxxxxx" TO cit
             COMPUTE hrs = -1
             COMPUTE sal = -1
             COMPUTE pno = -1
             DISPLAY "FETCH cn INTO :eno, :enaam, :grd, :cit, :hrs,
      -    " :sal, :pno;"
             EXEC SQL FETCH cn INTO 
               :eno, :enaam, :grd, :cit, :hrs, :sal, :pno END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "eno should be E3; its value is ", eno
             DISPLAY "enaam should be Colin; its value is ", enaam
             DISPLAY "grd should be 24; its value is ", grd
             DISPLAY "cit should be Leuven; its value is ", cit
             DISPLAY "hrs should be 10; its value is ", hrs
             DISPLAY "sal should be 8000; its value is ", sal
             DISPLAY "pno should be 16; its value is ", pno
             if (eno  NOT  =   "E3"  OR  enaam  NOT  =   "Colin"  OR 
             grd  NOT =  24) then
               MOVE 0 TO flag
             END-IF
             if (cit  NOT  =   "Leuven"  OR  hrs  NOT =  10  OR  sal 
             NOT =  8000) then
               MOVE 0 TO flag
             END-IF
             if (pno  NOT =  16) then
               MOVE 0 TO flag
             END-IF

             MOVE "xxx" TO eno
             MOVE "xxxxxxxxxxxxxxxxxxxx" TO enaam
             COMPUTE grd = -1
             MOVE "xxxxxxxxxxxxxxx" TO cit
             MOVE 99 TO indic1
             MOVE 99 TO indic2
             MOVE 99 TO indic3
             DISPLAY "FETCH cn INTO :eno, :enaam, :grd, :cit,
      -    " :hrs:indic1,"
             DISPLAY ":sal:indic2, :pno:indic3;"
             EXEC SQL FETCH cn INTO 
               :eno, :enaam, :grd, :cit, :hrs:indic1, :sal:indic2,
             :pno:indic3 END-EXEC
             MOVE SQLCODE TO SQL-COD
             DISPLAY "eno should be E4; its value is ", eno
             DISPLAY "enaam should be Daniel; its value is ", enaam
             DISPLAY "grd should be 28; its value is ", grd
             DISPLAY "cit should be Cologne; its value is ", cit
             DISPLAY "indic1 should be -1; its value is ", indic1
             DISPLAY "indic2 should be -1; its value is ", indic2
             DISPLAY "indic3 should be -1; its value is ", indic3
             if (eno  NOT  =   "E4"  OR  enaam  NOT  =   "Daniel"  OR 
             grd  NOT =  28) then
               MOVE 0 TO flag
             END-IF
             if (cit  NOT  =   "Cologne"  OR  indic1  NOT =  -1  OR 
             indic2  NOT =  -1) then
               MOVE 0 TO flag
             END-IF
             if (indic3  NOT =  -1) then
               MOVE 0 TO flag
             END-IF

             MOVE "xxx" TO eno
             MOVE "xxxxxxxxxxxxxxxxxxxx" TO enaam
             MOVE 99 TO indic1
             MOVE 99 TO indic2
             COMPUTE hrs = -1
             COMPUTE sal = -1
             COMPUTE pno = -1
             DISPLAY "FETCH cn INTO "
             DISPLAY ":eno, :enaam, :grd:indic1, :cit:indic2, :hrs,
      -    " :sal, :pno;"
             EXEC SQL FETCH cn INTO 
               :eno, :enaam, :grd:indic1, :cit:indic2, :hrs, :sal, :pno
             END-EXEC
             MOVE SQLCODE TO SQL-COD
             DISPLAY "eno should be E5; its value is ", eno
             DISPLAY "enaam should be Edward; its value is ", enaam
             DISPLAY "hrs should be 30; its value is ", hrs
             DISPLAY "sal should be 50000; its value is ", sal
             DISPLAY "pno should be 17; its value is ", pno
             DISPLAY "indic1 should be -1; its value is ", indic1
             DISPLAY "indic2 should be -1; its value is ", indic2
             if (eno  NOT  =   "E5"  OR  enaam  NOT  =   "Edward") then
               MOVE 0 TO flag
             END-IF
             if (indic1  NOT =  -1  OR  indic2  NOT =  -1) then
               MOVE 0 TO flag
             END-IF
             if (hrs  NOT =  30  OR  sal  NOT =  50000) then
               MOVE 0 TO flag
             END-IF
             if (pno  NOT =  17) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "FETCH cn INTO :eno, :enaam, :grd, :cit, :hrs,
      -    " :sal, :pno;"
             EXEC SQL FETCH cn INTO 
               :eno, :enaam, :grd, :cit, :hrs, :sal, :pno END-EXEC
             MOVE SQLCODE TO SQL-COD

      *That should generate a no data exception 
      *which is SQLSTATE 02000 

             DISPLAY "SQLCODE should be 100; its value is ", SQL-COD
             if (SQLCODE  NOT =  100) then
               MOVE 0 TO flag
             END-IF
             DISPLAY "SQLSTATE should be 02000; its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (NORMSQ  NOT  =   "02000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "02000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             DISPLAY  " "

             DISPLAY "CLOSE cn;"
             EXEC SQL CLOSE cn END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "ROLLBACK WORK;"
             EXEC SQL ROLLBACK WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             if ( flag  =  1 ) then
               DISPLAY " yts806.pco *** pass *** "
               EXEC SQL INSERT INTO CTS1.TESTREPORT
                 VALUES('7563','pass','PCO') END-EXEC
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " yts806.pco *** fail *** "
               EXEC SQL INSERT INTO CTS1.TESTREPORT
                 VALUES('7563','fail','PCO') END-EXEC
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "==============================================="

             EXEC SQL COMMIT WORK END-EXEC
             MOVE SQLCODE TO SQL-COD
      ******************** END TEST7563 ********************


      **** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
           STOP RUN.

      *    ****  Procedures for PERFORM statements

      *Test SQLCODE and SQLSTATE for normal completion. 
       CHCKOK.
             DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
             PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE NOT =  0  OR   NORMSQ NOT = "00000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ = "00000"  AND  NORMSQ NOT = SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             .

       NOSUBCLASS.

      *This routine replaces valid implementation-defined       
      *subclasses with 000.  This replacement equates valid     
      *implementation-defined subclasses with the 000 value     
      *expected by the test case; otherwise the test will fail. 
      *After calling NOSUBCLASS, NORMSQ will be tested          
      *                          SQLSTATE will be printed.      

           MOVE SQLSTATE TO NORMSQ

           MOVE 3 TO norm1
      *subclass begins in position 3 of char array NORMSQ 
      *valid subclass begins with 5-9, I-Z, end of ALPNUM table 
           PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM
           
      *Quit if NORMSQ is unchanged.  Subclass is not impl.-def. 
      *Changed NORMSQ means implementation-defined subclass,    
      *so proceed to zero it out, if valid (0-9,A-Z)            
           if (NORMSQ   =   SQLSTATE) then
             GO TO EXIT-NOSUBCLASS
           END-IF

           MOVE 4 TO norm1
      *examining position 4 of char array NORMSQ 
      *valid characters are 0-9, A-Z 
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM
          
           MOVE 5 TO norm1
      *valid characters are 0-9, A-Z 
      *examining position 5 of char array NORMSQ 
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM
   
      *implementation-defined subclasses are allowed for warnings 
      *(class = 01).  These equate to successful completion 
      *SQLSTATE values of 00000. 
      *Reference SQL-92 4.28 SQL-transactions, paragraph 2 

           if (NORMSQX(1)  =  "0"  AND  NORMSQX(2)  =  "1") then
             MOVE "0" TO NORMSQX(2)
           END-IF
           .

       EXIT-NOSUBCLASS.
           EXIT.

Messung V0.5