|
IDENTIFICATION DIVISION.
PROGRAM-ID. DML109.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* EMBEDDED COBOL (file "DML109.PCO")
****************************************************************
*
* COMMENT SECTION
*
* DATE 1993/11/17 EMBEDDED COBOL LANGUAGE
* NIST SQL VALIDATION TEST SUITE V6.0
* DISCLAIMER:
* This program was written by employees of NIST to test SQL
* implementations for conformance to the SQL standards.
* NIST assumes no responsibility for any party's use of
* this program.
*
* DML109.PCO
* WRITTEN BY: David W. Flater
* TRANSLATED AUTOMATICALLY FROM EMBEDDED C BY CHRIS SCHANZLE
*
* This routine tests more DATETIME features in Transitional
* SQL. This is the dynamic version of DML108.
*
* REFERENCES
* FIPS PUB 127-2 14.1 Transitional SQL
* ANSI SQL-1992
*
****************************************************************
EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 SQLCODE PIC S9(9) COMP.
01 SQLSTATE PIC X(5).
01 uid PIC X(18).
01 uidx PIC X(18).
01 int1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 int2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 dstmt PIC X(50).
01 longst PIC X(240).
EXEC SQL END DECLARE SECTION END-EXEC
01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 ALPNUM-TABLE VALUE IS
"01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
05 ALPNUM PIC X OCCURS 36 TIMES.
01 NORMSQ.
05 NORMSQX PIC X OCCURS 5 TIMES.
01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
*date_time declaration
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
PROCEDURE DIVISION.
P0.
MOVE "FLATER " TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
EXEC SQL SELECT USER INTO :uidx FROM HU.ECCO END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL ROLLBACK WORK END-EXEC
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User ", uid " expected. User ", uidx "
- " connected"
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY
"SQL Test Suite, V6.0, Embedded COBOL, dml109.pco"
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST0618 *******************
MOVE 1 TO flag
DISPLAY " TEST0618 "
DISPLAY " DATETIME with predicates, set fns (dynamic)"
DISPLAY "References:"
DISPLAY " FIPS PUB 127-2 14.1 Transitional SQL features
- " 5, 20"
DISPLAY " COR1 7.1 "
DISPLAY " - - - - - - - - - - - - - - - - - - -"
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
EXEC SQL DELETE FROM CONCATBUF END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL INSERT INTO CONCATBUF VALUES (
'CREATE TABLE TEMPS (' ||
' ENTERED TIMESTAMP,' ||
' START DATE,' ||
' APPT INTERVAL DAY,' ||
' HOUR_IN TIME,' ||
' HOUR_OUT TIME,' ||
' LUNCH INTERVAL HOUR TO MINUTE)'
) END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "longst=""", longst """"
DISPLAY "COMMIT WORK;"
EXEC SQL COMMIT WORK END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "EXECUTE IMMEDIATE :longst;"
EXEC SQL EXECUTE IMMEDIATE :longst END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "COMMIT WORK;"
EXEC SQL COMMIT WORK END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
EXEC SQL DELETE FROM CONCATBUF END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL INSERT INTO CONCATBUF VALUES (
'CREATE VIEW SUBQ1 AS' ||
' SELECT MIN (HOUR_IN) AS TOO_EARLY,' ||
' MAX (ALL START) AS LATEST,' ||
' AVG (LUNCH) AS AVGLUNCH,' ||
' AVG (DISTINCT LUNCH) AS D_AVGLUNCH,' ||
' SUM (APPT) AS SUMAPPT' ||
' FROM TEMPS'
) END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "longst=""", longst """"
DISPLAY "COMMIT WORK;"
EXEC SQL COMMIT WORK END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "EXECUTE IMMEDIATE :longst;"
EXEC SQL EXECUTE IMMEDIATE :longst END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
EXEC SQL COMMIT WORK END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
EXEC SQL DELETE FROM CONCATBUF END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL INSERT INTO CONCATBUF VALUES (
'INSERT INTO TEMPS VALUES (' ||
' TIMESTAMP ''1993-11-10 12:25:14'',' ||
' DATE ''1993-11-12'',' ||
' INTERVAL ''4'' DAY,' ||
' TIME ''08:30:00'',' ||
' TIME ''16:30:00'',' ||
' INTERVAL ''1:00'' HOUR TO MINUTE)'
) END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "longst=""", longst """"
DISPLAY "EXECUTE IMMEDIATE :longst;"
EXEC SQL EXECUTE IMMEDIATE :longst END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
EXEC SQL DELETE FROM CONCATBUF END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL INSERT INTO CONCATBUF VALUES (
'INSERT INTO TEMPS VALUES (' ||
' TIMESTAMP ''1993-11-10 13:15:14'',' ||
' DATE ''1993-11-15'',' ||
' INTERVAL ''5'' DAY,' ||
' TIME ''08:30:00'',' ||
' TIME ''17:30:00'',' ||
' INTERVAL ''0:30'' HOUR TO MINUTE)'
) END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "longst=""", longst """"
DISPLAY "EXECUTE IMMEDIATE :longst;"
EXEC SQL EXECUTE IMMEDIATE :longst END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
EXEC SQL DELETE FROM CONCATBUF END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL INSERT INTO CONCATBUF VALUES (
'INSERT INTO TEMPS VALUES (' ||
' TIMESTAMP ''1993-11-17 09:56:48'',' ||
' DATE ''1994-11-18'',' ||
' INTERVAL ''3'' DAY,' ||
' TIME ''09:00:00'',' ||
' TIME ''17:00:00'',' ||
' INTERVAL ''1:00'' HOUR TO MINUTE)'
) END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "longst=""", longst """"
DISPLAY "EXECUTE IMMEDIATE :longst;"
EXEC SQL EXECUTE IMMEDIATE :longst END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*= <> < > <= >=
EXEC SQL DELETE FROM CONCATBUF END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL INSERT INTO CONCATBUF VALUES (
'SELECT COUNT(*) FROM TEMPS WHERE' ||
' LUNCH < INTERVAL ''1:00'' HOUR TO MINUTE'
) END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "longst=""", longst """"
DISPLAY "PREPARE S10911 FROM :longst;"
EXEC SQL PREPARE S10911 FROM :longst END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DECLARE C10911 CURSOR FOR S10911;"
EXEC SQL DECLARE C10911 CURSOR FOR S10911 END-EXEC
DISPLAY " "
DISPLAY "OPEN C10911;"
EXEC SQL OPEN C10911 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
DISPLAY "FETCH C10911 INTO :int1;"
EXEC SQL FETCH C10911 INTO :int1 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 1; its value is ", int1
if (int1 NOT = 1) then
MOVE 0 TO flag
END-IF
DISPLAY "CLOSE C10911;"
EXEC SQL CLOSE C10911 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
EXEC SQL DELETE FROM CONCATBUF END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL INSERT INTO CONCATBUF VALUES (
'SELECT COUNT(*) FROM TEMPS WHERE' ||
' LUNCH <= INTERVAL ''1:00'' HOUR TO MINUTE'
) END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "longst=""", longst """"
DISPLAY "PREPARE S10912 FROM :longst;"
EXEC SQL PREPARE S10912 FROM :longst END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DECLARE C10912 CURSOR FOR S10912;"
EXEC SQL DECLARE C10912 CURSOR FOR S10912 END-EXEC
DISPLAY " "
DISPLAY "OPEN C10912;"
EXEC SQL OPEN C10912 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
DISPLAY "FETCH C10912 INTO :int1;"
EXEC SQL FETCH C10912 INTO :int1 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 3; its value is ", int1
if (int1 NOT = 3) then
MOVE 0 TO flag
END-IF
DISPLAY "CLOSE C10912;"
EXEC SQL CLOSE C10912 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
EXEC SQL DELETE FROM CONCATBUF END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL INSERT INTO CONCATBUF VALUES (
'SELECT COUNT(*) FROM TEMPS WHERE' ||
' START <> DATE ''1993-11-15'' AND' ||
' START <> DATE ''1993-11-12'''
) END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "longst=""", longst """"
DISPLAY "PREPARE S10913 FROM :longst;"
EXEC SQL PREPARE S10913 FROM :longst END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DECLARE C10913 CURSOR FOR S10913;"
EXEC SQL DECLARE C10913 CURSOR FOR S10913 END-EXEC
DISPLAY " "
DISPLAY "OPEN C10913;"
EXEC SQL OPEN C10913 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
DISPLAY "FETCH C10913 INTO :int1;"
EXEC SQL FETCH C10913 INTO :int1 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 1; its value is ", int1
if (int1 NOT = 1) then
MOVE 0 TO flag
END-IF
DISPLAY "CLOSE C10913;"
EXEC SQL CLOSE C10913 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
EXEC SQL DELETE FROM CONCATBUF END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL INSERT INTO CONCATBUF VALUES (
'SELECT COUNT(*) FROM TEMPS WHERE' ||
' START = DATE ''1993-11-15'' OR' ||
' START = DATE ''1993-11-12'''
) END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "longst=""", longst """"
DISPLAY "PREPARE S10914 FROM :longst;"
EXEC SQL PREPARE S10914 FROM :longst END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DECLARE C10914 CURSOR FOR S10914;"
EXEC SQL DECLARE C10914 CURSOR FOR S10914 END-EXEC
DISPLAY " "
DISPLAY "OPEN C10914;"
EXEC SQL OPEN C10914 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
DISPLAY "FETCH C10914 INTO :int1;"
EXEC SQL FETCH C10914 INTO :int1 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 2; its value is ", int1
if (int1 NOT = 2) then
MOVE 0 TO flag
END-IF
DISPLAY "CLOSE C10914;"
EXEC SQL CLOSE C10914 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
EXEC SQL DELETE FROM CONCATBUF END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL INSERT INTO CONCATBUF VALUES (
'SELECT COUNT(*) FROM TEMPS WHERE' ||
' HOUR_OUT > TIME ''17:00:00'''
) END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "longst=""", longst """"
DISPLAY "PREPARE S10915 FROM :longst;"
EXEC SQL PREPARE S10915 FROM :longst END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DECLARE C10915 CURSOR FOR S10915;"
EXEC SQL DECLARE C10915 CURSOR FOR S10915 END-EXEC
DISPLAY " "
DISPLAY "OPEN C10915;"
EXEC SQL OPEN C10915 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
DISPLAY "FETCH C10915 INTO :int1;"
EXEC SQL FETCH C10915 INTO :int1 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 1; its value is ", int1
if (int1 NOT = 1) then
MOVE 0 TO flag
END-IF
DISPLAY "CLOSE C10915;"
EXEC SQL CLOSE C10915 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
EXEC SQL DELETE FROM CONCATBUF END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL INSERT INTO CONCATBUF VALUES (
'SELECT COUNT(*) FROM TEMPS WHERE' ||
' HOUR_OUT >= TIME ''17:00:00'''
) END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "longst=""", longst """"
DISPLAY "PREPARE S10916 FROM :longst;"
EXEC SQL PREPARE S10916 FROM :longst END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DECLARE C10916 CURSOR FOR S10916;"
EXEC SQL DECLARE C10916 CURSOR FOR S10916 END-EXEC
DISPLAY " "
DISPLAY "OPEN C10916;"
EXEC SQL OPEN C10916 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
DISPLAY "FETCH C10916 INTO :int1;"
EXEC SQL FETCH C10916 INTO :int1 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 2; its value is ", int1
if (int1 NOT = 2) then
MOVE 0 TO flag
END-IF
DISPLAY "CLOSE C10916;"
EXEC SQL CLOSE C10916 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*BETWEEN
EXEC SQL DELETE FROM CONCATBUF END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL INSERT INTO CONCATBUF VALUES (
'SELECT COUNT(*) FROM TEMPS WHERE' ||
' ENTERED BETWEEN' ||
' TIMESTAMP ''1993-11-10 00:00:00'' AND' ||
' TIMESTAMP ''1993-11-10 23:59:59'''
) END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "longst=""", longst """"
DISPLAY "PREPARE S10917 FROM :longst;"
EXEC SQL PREPARE S10917 FROM :longst END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DECLARE C10917 CURSOR FOR S10917;"
EXEC SQL DECLARE C10917 CURSOR FOR S10917 END-EXEC
DISPLAY " "
DISPLAY "OPEN C10917;"
EXEC SQL OPEN C10917 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
DISPLAY "FETCH C10917 INTO :int1;"
EXEC SQL FETCH C10917 INTO :int1 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 2; its value is ", int1
if (int1 NOT = 2) then
MOVE 0 TO flag
END-IF
DISPLAY "CLOSE C10917;"
EXEC SQL CLOSE C10917 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*IN
EXEC SQL DELETE FROM CONCATBUF END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL INSERT INTO CONCATBUF VALUES (
'SELECT COUNT(*) FROM TEMPS WHERE' ||
' HOUR_OUT IN' ||
' (SELECT HOUR_IN + INTERVAL ''8'' HOUR' ||
' FROM TEMPS)'
) END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "longst=""", longst """"
DISPLAY "PREPARE S10918 FROM :longst;"
EXEC SQL PREPARE S10918 FROM :longst END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DECLARE C10918 CURSOR FOR S10918;"
EXEC SQL DECLARE C10918 CURSOR FOR S10918 END-EXEC
DISPLAY " "
DISPLAY "OPEN C10918;"
EXEC SQL OPEN C10918 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
DISPLAY "FETCH C10918 INTO :int1;"
EXEC SQL FETCH C10918 INTO :int1 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 2; its value is ", int1
if (int1 NOT = 2) then
MOVE 0 TO flag
END-IF
DISPLAY "CLOSE C10918;"
EXEC SQL CLOSE C10918 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*IS NULL -- see test 0621
*OVERLAPS (tested once already in DML106-7)
EXEC SQL DELETE FROM CONCATBUF END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL INSERT INTO CONCATBUF VALUES (
'SELECT COUNT(*) FROM TEMPS WHERE' ||
' (START, APPT) OVERLAPS' ||
' (DATE ''1993-11-14'',' ||
' INTERVAL ''2'' DAY)'
) END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "longst=""", longst """"
DISPLAY "PREPARE S10919 FROM :longst;"
EXEC SQL PREPARE S10919 FROM :longst END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DECLARE C10919 CURSOR FOR S10919;"
EXEC SQL DECLARE C10919 CURSOR FOR S10919 END-EXEC
DISPLAY " "
DISPLAY "OPEN C10919;"
EXEC SQL OPEN C10919 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
DISPLAY "FETCH C10919 INTO :int1;"
EXEC SQL FETCH C10919 INTO :int1 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 2; its value is ", int1
if (int1 NOT = 2) then
MOVE 0 TO flag
END-IF
DISPLAY "CLOSE C10919;"
EXEC SQL CLOSE C10919 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*ALL, SOME, ANY qualifiers (brief test)
EXEC SQL DELETE FROM CONCATBUF END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL INSERT INTO CONCATBUF VALUES (
'SELECT COUNT(*) FROM TEMPS WHERE' ||
' HOUR_OUT = ANY' ||
' (SELECT HOUR_IN + INTERVAL ''8'' HOUR' ||
' FROM TEMPS)'
) END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "longst=""", longst """"
DISPLAY "PREPARE S1091A FROM :longst;"
EXEC SQL PREPARE S1091A FROM :longst END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DECLARE C1091A CURSOR FOR S1091A;"
EXEC SQL DECLARE C1091A CURSOR FOR S1091A END-EXEC
DISPLAY " "
DISPLAY "OPEN C1091A;"
EXEC SQL OPEN C1091A END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
DISPLAY "FETCH C1091A INTO :int1;"
EXEC SQL FETCH C1091A INTO :int1 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 2; its value is ", int1
if (int1 NOT = 2) then
MOVE 0 TO flag
END-IF
DISPLAY "CLOSE C1091A;"
EXEC SQL CLOSE C1091A END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
EXEC SQL DELETE FROM CONCATBUF END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL INSERT INTO CONCATBUF VALUES (
'SELECT COUNT(*) FROM TEMPS WHERE' ||
' EXTRACT (YEAR FROM ENTERED) <> SOME' ||
' (SELECT EXTRACT (YEAR FROM START)' ||
' FROM TEMPS)'
) END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "longst=""", longst """"
DISPLAY "PREPARE S1091B FROM :longst;"
EXEC SQL PREPARE S1091B FROM :longst END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DECLARE C1091B CURSOR FOR S1091B;"
EXEC SQL DECLARE C1091B CURSOR FOR S1091B END-EXEC
DISPLAY " "
DISPLAY "OPEN C1091B;"
EXEC SQL OPEN C1091B END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
DISPLAY "FETCH C1091B INTO :int1;"
EXEC SQL FETCH C1091B INTO :int1 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 3; its value is ", int1
if (int1 NOT = 3) then
MOVE 0 TO flag
END-IF
DISPLAY "CLOSE C1091B;"
EXEC SQL CLOSE C1091B END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*The following query would be helpful in finding errors in
*the data.
EXEC SQL DELETE FROM CONCATBUF END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL INSERT INTO CONCATBUF VALUES (
'SELECT COUNT(*) FROM TEMPS WHERE' ||
' EXTRACT (YEAR FROM START) <> ALL' ||
' (SELECT EXTRACT (YEAR FROM ENTERED)' ||
' FROM TEMPS)'
) END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "longst=""", longst """"
DISPLAY "PREPARE S1091C FROM :longst;"
EXEC SQL PREPARE S1091C FROM :longst END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DECLARE C1091C CURSOR FOR S1091C;"
EXEC SQL DECLARE C1091C CURSOR FOR S1091C END-EXEC
DISPLAY " "
DISPLAY "OPEN C1091C;"
EXEC SQL OPEN C1091C END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
DISPLAY "FETCH C1091C INTO :int1;"
EXEC SQL FETCH C1091C INTO :int1 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 1; its value is ", int1
if (int1 NOT = 1) then
MOVE 0 TO flag
END-IF
DISPLAY "CLOSE C1091C;"
EXEC SQL CLOSE C1091C END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*Set Functions
*Find the most insanely early hour of the morning that anybody
*has to work
EXEC SQL DELETE FROM CONCATBUF END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL INSERT INTO CONCATBUF VALUES (
'SELECT EXTRACT (HOUR FROM TOO_EARLY)' ||
' * 100 + EXTRACT (MINUTE FROM TOO_EARLY)' ||
' FROM SUBQ1'
) END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "longst=""", longst """"
DISPLAY "PREPARE S1091D FROM :longst;"
EXEC SQL PREPARE S1091D FROM :longst END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DECLARE C1091D CURSOR FOR S1091D;"
EXEC SQL DECLARE C1091D CURSOR FOR S1091D END-EXEC
DISPLAY " "
DISPLAY "OPEN C1091D;"
EXEC SQL OPEN C1091D END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
DISPLAY "FETCH C1091D INTO :int1;"
EXEC SQL FETCH C1091D INTO :int1 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 830; its value is ", int1
if (int1 NOT = 830) then
MOVE 0 TO flag
END-IF
DISPLAY "CLOSE C1091D;"
EXEC SQL CLOSE C1091D END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*Find the start date of the latest-starting appointment
EXEC SQL DELETE FROM CONCATBUF END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL INSERT INTO CONCATBUF VALUES (
'SELECT EXTRACT (YEAR FROM LATEST),' ||
' EXTRACT (MONTH FROM LATEST) * 100 +' ||
' EXTRACT (DAY FROM LATEST)' ||
' FROM SUBQ1'
) END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "longst=""", longst """"
DISPLAY "PREPARE S1091E FROM :longst;"
EXEC SQL PREPARE S1091E FROM :longst END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DECLARE C1091E CURSOR FOR S1091E;"
EXEC SQL DECLARE C1091E CURSOR FOR S1091E END-EXEC
DISPLAY " "
DISPLAY "OPEN C1091E;"
EXEC SQL OPEN C1091E END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
COMPUTE int2 = -1
DISPLAY "FETCH C1091E INTO :int1, :int2;"
EXEC SQL FETCH C1091E INTO :int1, :int2 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 1994; its value is ", int1
if (int1 NOT = 1994) then
MOVE 0 TO flag
END-IF
DISPLAY "int2 should be 1118; its value is ", int2
if (int2 NOT = 1118) then
MOVE 0 TO flag
END-IF
DISPLAY "CLOSE C1091E;"
EXEC SQL CLOSE C1091E END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*Find the average lunch period.
EXEC SQL DELETE FROM CONCATBUF END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL INSERT INTO CONCATBUF VALUES (
'SELECT EXTRACT (HOUR FROM AVGLUNCH)' ||
' * 100 + EXTRACT (MINUTE FROM AVGLUNCH)' ||
' FROM SUBQ1'
) END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "longst=""", longst """"
DISPLAY "PREPARE S1091F FROM :longst;"
EXEC SQL PREPARE S1091F FROM :longst END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DECLARE C1091F CURSOR FOR S1091F;"
EXEC SQL DECLARE C1091F CURSOR FOR S1091F END-EXEC
DISPLAY " "
DISPLAY "OPEN C1091F;"
EXEC SQL OPEN C1091F END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*Numeric truncation might result in a 49 here. 4.4.1 says that
*the choice of whether to truncate or round is implementation-
*defined.
COMPUTE int1 = -1
DISPLAY "FETCH C1091F INTO :int1;"
EXEC SQL FETCH C1091F INTO :int1 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 50; its value is ", int1
if (int1 = 49) then
DISPLAY "Numeric truncation is allowed. 49 is OK."
END-IF
if (int1 NOT = 50 AND int1 NOT = 49) then
MOVE 0 TO flag
END-IF
DISPLAY "CLOSE C1091F;"
EXEC SQL CLOSE C1091F END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*Test DISTINCT
EXEC SQL DELETE FROM CONCATBUF END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL INSERT INTO CONCATBUF VALUES (
'SELECT EXTRACT (HOUR FROM D_AVGLUNCH)' ||
' * 100 + EXTRACT (MINUTE FROM D_AVGLUNCH)' ||
' FROM SUBQ1'
) END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "longst=""", longst """"
DISPLAY "PREPARE S1091G FROM :longst;"
EXEC SQL PREPARE S1091G FROM :longst END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DECLARE C1091G CURSOR FOR S1091G;"
EXEC SQL DECLARE C1091G CURSOR FOR S1091G END-EXEC
DISPLAY " "
DISPLAY "OPEN C1091G;"
EXEC SQL OPEN C1091G END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
DISPLAY "FETCH C1091G INTO :int1;"
EXEC SQL FETCH C1091G INTO :int1 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 45; its value is ", int1
if (int1 NOT = 45) then
MOVE 0 TO flag
END-IF
DISPLAY "CLOSE C1091G;"
EXEC SQL CLOSE C1091G END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*Find total number of days appointed
EXEC SQL DELETE FROM CONCATBUF END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL INSERT INTO CONCATBUF VALUES (
'SELECT EXTRACT (DAY FROM SUMAPPT)' ||
' FROM SUBQ1'
) END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL SELECT ZZ INTO :longst FROM CONCATBUF END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "longst=""", longst """"
DISPLAY "PREPARE S1091H FROM :longst;"
EXEC SQL PREPARE S1091H FROM :longst END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DECLARE C1091H CURSOR FOR S1091H;"
EXEC SQL DECLARE C1091H CURSOR FOR S1091H END-EXEC
DISPLAY " "
DISPLAY "OPEN C1091H;"
EXEC SQL OPEN C1091H END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
DISPLAY "FETCH C1091H INTO :int1;"
EXEC SQL FETCH C1091H INTO :int1 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 12; its value is ", int1
if (int1 NOT = 12) then
MOVE 0 TO flag
END-IF
DISPLAY "CLOSE C1091H;"
EXEC SQL CLOSE C1091H END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*Finally, COUNT
DISPLAY "dstmt=""SELECT COUNT (DISTINCT LUNCH) FROM
- " TEMPS"""
MOVE "SELECT COUNT (DISTINCT LUNCH) FROM TEMPS "
TO dstmt
DISPLAY "PREPARE S1091I FROM :dstmt;"
EXEC SQL PREPARE S1091I FROM :dstmt END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DECLARE C1091I CURSOR FOR S1091I;"
EXEC SQL DECLARE C1091I CURSOR FOR S1091I END-EXEC
DISPLAY " "
DISPLAY "OPEN C1091I;"
EXEC SQL OPEN C1091I END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
COMPUTE int1 = -1
DISPLAY "FETCH C1091I INTO :int1;"
EXEC SQL FETCH C1091I INTO :int1 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 2; its value is ", int1
if (int1 NOT = 2) then
MOVE 0 TO flag
END-IF
DISPLAY "CLOSE C1091I;"
EXEC SQL CLOSE C1091I END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "ROLLBACK WORK;"
EXEC SQL ROLLBACK WORK END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "dstmt=""DROP TABLE TEMPS CASCADE"""
MOVE "DROP TABLE TEMPS CASCADE "
TO dstmt
DISPLAY "EXECUTE IMMEDIATE :dstmt;"
EXEC SQL EXECUTE IMMEDIATE :dstmt END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
EXEC SQL COMMIT WORK END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
if ( flag = 1 ) then
DISPLAY " *** pass *** "
EXEC SQL INSERT INTO HU.TESTREPORT
VALUES('0618','pass','PCO') END-EXEC
MOVE SQLCODE TO SQL-COD
else
DISPLAY " dml109.pco *** fail *** "
EXEC SQL INSERT INTO HU.TESTREPORT
VALUES('0618','fail','PCO') END-EXEC
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "==============================================="
EXEC SQL COMMIT WORK END-EXEC
MOVE SQLCODE TO SQL-COD
******************** END TEST0618 ********************
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
*Test SQLCODE and SQLSTATE for normal completion.
CHCKOK.
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 0 OR NORMSQ NOT = "00000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "00000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
.
NOSUBCLASS.
*This routine replaces valid implementation-defined
*subclasses with 000. This replacement equates valid
*implementation-defined subclasses with the 000 value
*expected by the test case; otherwise the test will fail.
*After calling NOSUBCLASS, NORMSQ will be tested
* SQLSTATE will be printed.
MOVE SQLSTATE TO NORMSQ
MOVE 3 TO norm1
*subclass begins in position 3 of char array NORMSQ
*valid subclass begins with 5-9, I-Z, end of ALPNUM table
PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*Quit if NORMSQ is unchanged. Subclass is not impl.-def.
*Changed NORMSQ means implementation-defined subclass,
*so proceed to zero it out, if valid (0-9,A-Z)
if (NORMSQ = SQLSTATE) then
GO TO EXIT-NOSUBCLASS
END-IF
MOVE 4 TO norm1
*examining position 4 of char array NORMSQ
*valid characters are 0-9, A-Z
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
MOVE 5 TO norm1
*valid characters are 0-9, A-Z
*examining position 5 of char array NORMSQ
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*implementation-defined subclasses are allowed for warnings
*(class = 01). These equate to successful completion
*SQLSTATE values of 00000.
*Reference SQL-92 4.28 SQL-transactions, paragraph 2
if (NORMSQX(1) = "0" AND NORMSQX(2) = "1") then
MOVE "0" TO NORMSQX(2)
END-IF
.
EXIT-NOSUBCLASS.
EXIT.
¤ Dauer der Verarbeitung: 0.34 Sekunden
(vorverarbeitet)
¤
|
Laden
Fehler beim Verzeichnis:
in der Quellcodebibliothek suchen
Die farbliche Syntaxdarstellung ist noch experimentell.
|
