|
IDENTIFICATION DIVISION.
PROGRAM-ID. DML177.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* EMBEDDED COBOL (file "DML177.PCO")
****************************************************************
*
* COMMENT SECTION
*
* DATE 1996-05-14 EMBEDDED COBOL LANGUAGE
* SQL VALIDATION TEST SUITE V6.0
* DISCLAIMER:
* This program was written by employees of NIST to test SQL
* implementations for conformance to the SQL standards.
* NIST assumes no responsibility for any party's use of
* this program.
*
* DML177.PCO
* WRITTEN BY: David Flater
* TRANSLATED AUTOMATICALLY FROM EMBEDDED C BY CHRIS SCHANZLE
*
* This routine tests Intermediate SQL.
*
* REFERENCES
* FIPS PUB 127-2 14.2 Intermediate SQL
* ANSI SQL-1992
*
****************************************************************
EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 SQLCODE PIC S9(9) COMP.
01 SQLSTATE PIC X(5).
01 uid PIC X(18).
01 uidx PIC X(18).
01 int1 PIC S9(10) DISPLAY SIGN LEADING SEPARATE.
EXEC SQL END DECLARE SECTION END-EXEC
01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 ALPNUM-TABLE VALUE IS
"01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
05 ALPNUM PIC X OCCURS 36 TIMES.
01 NORMSQ.
05 NORMSQX PIC X OCCURS 5 TIMES.
01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
*date_time declaration
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
PROCEDURE DIVISION.
P0.
MOVE "FLATER " TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
EXEC SQL SELECT USER INTO :uidx FROM HU.ECCO END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL ROLLBACK WORK END-EXEC
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User ", uid, " expected. User ", uidx, "
- " connected"
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY
"SQL Test Suite, V6.0, Embedded COBOL, dml177.pco"
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
******************** BEGIN TEST0889 *******************
MOVE 1 TO flag
DISPLAY " FIPS sizing TEST0889"
DISPLAY " FIPS sizing, INTEGER binary prec >= 31"
DISPLAY "References:"
DISPLAY " FIPS 16.6 -- Sizing #11, INTEGER binary
- " precision"
DISPLAY " - - - - - - - - - - - - - - - - - - -"
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
DISPLAY "CREATE TABLE NOMAIL ("
DISPLAY " C1 INT);"
EXEC SQL CREATE TABLE NOMAIL (
C1 INT) END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
EXEC SQL COMMIT WORK END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*2 ^ 31 = 2147483648
DISPLAY "INSERT INTO NOMAIL VALUES (2147483647);"
EXEC SQL INSERT INTO NOMAIL VALUES (2147483647) END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "INSERT INTO NOMAIL VALUES (-2147483647);"
EXEC SQL INSERT INTO NOMAIL VALUES (-2147483647) END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
MOVE 0 TO int1
DISPLAY "SELECT C1 INTO :int1"
DISPLAY " FROM NOMAIL WHERE C1 > 0;"
EXEC SQL SELECT C1 INTO :int1
FROM NOMAIL WHERE C1 > 0 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 2147483647; its value is ", int1
if (int1 NOT = 2147483647) then
MOVE 0 TO flag
END-IF
MOVE 0 TO int1
DISPLAY "SELECT C1 INTO :int1"
DISPLAY " FROM NOMAIL WHERE C1 < 0;"
EXEC SQL SELECT C1 INTO :int1
FROM NOMAIL WHERE C1 < 0 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be -2147483647; its value is ", int1
if (int1 NOT = -2147483647) then
MOVE 0 TO flag
END-IF
MOVE 0 TO int1
DISPLAY "SELECT C1 - 2147483646 INTO :int1"
DISPLAY " FROM NOMAIL"
DISPLAY " WHERE C1 > 0;"
EXEC SQL SELECT C1 - 2147483646 INTO :int1
FROM NOMAIL
WHERE C1 > 0 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 1; its value is ", int1
if (int1 NOT = 1) then
MOVE 0 TO flag
END-IF
MOVE 0 TO int1
DISPLAY "SELECT C1 + 2147483646 INTO :int1"
DISPLAY " FROM NOMAIL"
DISPLAY " WHERE C1 < 0;"
EXEC SQL SELECT C1 + 2147483646 INTO :int1
FROM NOMAIL
WHERE C1 < 0 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be -1; its value is ", int1
if (int1 NOT = -1) then
MOVE 0 TO flag
END-IF
DISPLAY "UPDATE NOMAIL"
DISPLAY " SET C1 = C1 + 2147483646"
DISPLAY " WHERE C1 < 0;"
EXEC SQL UPDATE NOMAIL
SET C1 = C1 + 2147483646
WHERE C1 < 0 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "SELECT C1 INTO :int1"
DISPLAY " FROM NOMAIL WHERE C1 < 0;"
EXEC SQL SELECT C1 INTO :int1
FROM NOMAIL WHERE C1 < 0 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be -1; its value is ", int1
if (int1 NOT = -1) then
MOVE 0 TO flag
END-IF
DISPLAY "UPDATE NOMAIL"
DISPLAY " SET C1 = C1 - 1;"
EXEC SQL UPDATE NOMAIL
SET C1 = C1 - 1 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
MOVE 99 TO int1
DISPLAY "SELECT COUNT(*) INTO :int1"
DISPLAY " FROM NOMAIL"
DISPLAY " WHERE C1 = 2147483645;"
EXEC SQL SELECT COUNT(*) INTO :int1
FROM NOMAIL
WHERE C1 = 2147483645 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 0; its value is ", int1
if (int1 NOT = 0) then
MOVE 0 TO flag
END-IF
MOVE 99 TO int1
DISPLAY "SELECT COUNT(*) INTO :int1"
DISPLAY " FROM NOMAIL"
DISPLAY " WHERE C1 = 2147483646;"
EXEC SQL SELECT COUNT(*) INTO :int1
FROM NOMAIL
WHERE C1 = 2147483646 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 1; its value is ", int1
if (int1 NOT = 1) then
MOVE 0 TO flag
END-IF
MOVE 99 TO int1
DISPLAY "SELECT COUNT(*) INTO :int1"
DISPLAY " FROM NOMAIL"
DISPLAY " WHERE C1 = 2147483647;"
EXEC SQL SELECT COUNT(*) INTO :int1
FROM NOMAIL
WHERE C1 = 2147483647 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 0; its value is ", int1
if (int1 NOT = 0) then
MOVE 0 TO flag
END-IF
DISPLAY "COMMIT WORK;"
EXEC SQL COMMIT WORK END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DROP TABLE NOMAIL CASCADE;"
EXEC SQL DROP TABLE NOMAIL CASCADE END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
EXEC SQL COMMIT WORK END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
if ( flag = 1 ) then
DISPLAY " *** pass *** "
EXEC SQL INSERT INTO HU.TESTREPORT
VALUES('0889','pass','PCO') END-EXEC
MOVE SQLCODE TO SQL-COD
else
DISPLAY " dml177.pco *** fail *** "
EXEC SQL INSERT INTO HU.TESTREPORT
VALUES('0889','fail','PCO') END-EXEC
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "==============================================="
EXEC SQL COMMIT WORK END-EXEC
MOVE SQLCODE TO SQL-COD
******************** END TEST0889 ********************
******************** BEGIN TEST0890 *******************
MOVE 1 TO flag
DISPLAY " FIPS sizing TEST0890"
DISPLAY " FIPS sizing, SMALLINT binary prec >= 15"
DISPLAY "References:"
DISPLAY " FIPS 16.6 -- Sizing #13, SMALLINT binary
- " precision"
DISPLAY " - - - - - - - - - - - - - - - - - - -"
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
DISPLAY "CREATE TABLE YESMAIL ("
DISPLAY " C1 SMALLINT);"
EXEC SQL CREATE TABLE YESMAIL (
C1 SMALLINT) END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
EXEC SQL COMMIT WORK END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*2 ^ 15 = 32768
DISPLAY "INSERT INTO YESMAIL VALUES (32767);"
EXEC SQL INSERT INTO YESMAIL VALUES (32767) END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "INSERT INTO YESMAIL VALUES (-32767);"
EXEC SQL INSERT INTO YESMAIL VALUES (-32767) END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
MOVE 0 TO int1
DISPLAY "SELECT C1 INTO :int1"
DISPLAY " FROM YESMAIL WHERE C1 > 0;"
EXEC SQL SELECT C1 INTO :int1
FROM YESMAIL WHERE C1 > 0 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 32767; its value is ", int1
if (int1 NOT = 32767) then
MOVE 0 TO flag
END-IF
MOVE 0 TO int1
DISPLAY "SELECT C1 INTO :int1"
DISPLAY " FROM YESMAIL WHERE C1 < 0;"
EXEC SQL SELECT C1 INTO :int1
FROM YESMAIL WHERE C1 < 0 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be -32767; its value is ", int1
if (int1 NOT = -32767) then
MOVE 0 TO flag
END-IF
MOVE 0 TO int1
DISPLAY "SELECT C1 - 32766 INTO :int1"
DISPLAY " FROM YESMAIL"
DISPLAY " WHERE C1 > 0;"
EXEC SQL SELECT C1 - 32766 INTO :int1
FROM YESMAIL
WHERE C1 > 0 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 1; its value is ", int1
if (int1 NOT = 1) then
MOVE 0 TO flag
END-IF
MOVE 0 TO int1
DISPLAY "SELECT C1 + 32766 INTO :int1"
DISPLAY " FROM YESMAIL"
DISPLAY " WHERE C1 < 0;"
EXEC SQL SELECT C1 + 32766 INTO :int1
FROM YESMAIL
WHERE C1 < 0 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be -1; its value is ", int1
if (int1 NOT = -1) then
MOVE 0 TO flag
END-IF
DISPLAY "UPDATE YESMAIL"
DISPLAY " SET C1 = C1 + 32766"
DISPLAY " WHERE C1 < 0;"
EXEC SQL UPDATE YESMAIL
SET C1 = C1 + 32766
WHERE C1 < 0 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "SELECT C1 INTO :int1"
DISPLAY " FROM YESMAIL WHERE C1 < 0;"
EXEC SQL SELECT C1 INTO :int1
FROM YESMAIL WHERE C1 < 0 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be -1; its value is ", int1
if (int1 NOT = -1) then
MOVE 0 TO flag
END-IF
DISPLAY "UPDATE YESMAIL"
DISPLAY " SET C1 = C1 - 1;"
EXEC SQL UPDATE YESMAIL
SET C1 = C1 - 1 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
MOVE 99 TO int1
DISPLAY "SELECT COUNT(*) INTO :int1"
DISPLAY " FROM YESMAIL"
DISPLAY " WHERE C1 = 32765;"
EXEC SQL SELECT COUNT(*) INTO :int1
FROM YESMAIL
WHERE C1 = 32765 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 0; its value is ", int1
if (int1 NOT = 0) then
MOVE 0 TO flag
END-IF
MOVE 99 TO int1
DISPLAY "SELECT COUNT(*) INTO :int1"
DISPLAY " FROM YESMAIL"
DISPLAY " WHERE C1 = 32766;"
EXEC SQL SELECT COUNT(*) INTO :int1
FROM YESMAIL
WHERE C1 = 32766 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 1; its value is ", int1
if (int1 NOT = 1) then
MOVE 0 TO flag
END-IF
MOVE 99 TO int1
DISPLAY "SELECT COUNT(*) INTO :int1"
DISPLAY " FROM YESMAIL"
DISPLAY " WHERE C1 = 32767;"
EXEC SQL SELECT COUNT(*) INTO :int1
FROM YESMAIL
WHERE C1 = 32767 END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "int1 should be 0; its value is ", int1
if (int1 NOT = 0) then
MOVE 0 TO flag
END-IF
DISPLAY "COMMIT WORK;"
EXEC SQL COMMIT WORK END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "DROP TABLE YESMAIL CASCADE;"
EXEC SQL DROP TABLE YESMAIL CASCADE END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "COMMIT WORK;"
EXEC SQL COMMIT WORK END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
if ( flag = 1 ) then
DISPLAY " *** pass *** "
EXEC SQL INSERT INTO HU.TESTREPORT
VALUES('0890','pass','PCO') END-EXEC
MOVE SQLCODE TO SQL-COD
else
DISPLAY " dml177.pco *** fail *** "
EXEC SQL INSERT INTO HU.TESTREPORT
VALUES('0890','fail','PCO') END-EXEC
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "==============================================="
EXEC SQL COMMIT WORK END-EXEC
MOVE SQLCODE TO SQL-COD
******************** END TEST0890 ********************
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
*Test SQLCODE and SQLSTATE for normal completion.
CHCKOK.
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 0 OR NORMSQ NOT = "00000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "00000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
.
NOSUBCLASS.
*This routine replaces valid implementation-defined
*subclasses with 000. This replacement equates valid
*implementation-defined subclasses with the 000 value
*expected by the test case; otherwise the test will fail.
*After calling NOSUBCLASS, NORMSQ will be tested
* SQLSTATE will be printed.
MOVE SQLSTATE TO NORMSQ
MOVE 3 TO norm1
*subclass begins in position 3 of char array NORMSQ
*valid subclass begins with 5-9, I-Z, end of ALPNUM table
PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*Quit if NORMSQ is unchanged. Subclass is not impl.-def.
*Changed NORMSQ means implementation-defined subclass,
*so proceed to zero it out, if valid (0-9,A-Z)
if (NORMSQ = SQLSTATE) then
GO TO EXIT-NOSUBCLASS
END-IF
MOVE 4 TO norm1
*examining position 4 of char array NORMSQ
*valid characters are 0-9, A-Z
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
MOVE 5 TO norm1
*valid characters are 0-9, A-Z
*examining position 5 of char array NORMSQ
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*implementation-defined subclasses are allowed for warnings
*(class = 01). These equate to successful completion
*SQLSTATE values of 00000.
*Reference SQL-92 4.28 SQL-transactions, paragraph 2
if (NORMSQX(1) = "0" AND NORMSQX(2) = "1") then
MOVE "0" TO NORMSQX(2)
END-IF
.
EXIT-NOSUBCLASS.
EXIT.
¤ Dauer der Verarbeitung: 0.7 Sekunden
(vorverarbeitet)
¤
|
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung ist noch experimentell.
|
