|
|
|
|
Quelle config.guess
Sprache: unbekannt
|
|
#! /bin/sh
#
# GMP config.guess wrapper.
# Copyright 2000-2019 Free Software Foundation, Inc.
#
# This file is part of the GNU MP Library.
#
# The GNU MP Library is free software; you can redistribute it and/or modify
# it under the terms of either:
#
# * the GNU Lesser General Public License as published by the Free
# Software Foundation; either version 3 of the License, or (at your
# option) any later version.
#
# or
#
# * the GNU General Public License as published by the Free Software
# Foundation; either version 2 of the License, or (at your option) any
# later version.
#
# or both in parallel, as here.
#
# The GNU MP Library is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
# for more details.
#
# You should have received copies of the GNU General Public License and the
# GNU Lesser General Public License along with the GNU MP Library. If not,
# see https://www.gnu.org/licenses/.
# Usage: config.guess
#
# Print the host system CPU-VENDOR-OS.
#
# configfsf.guess is run and its guess then sharpened up to take advantage
# of the finer grained CPU types that GMP knows.
# Expect to find configfsf.guess in the same directory as this config.guess
configfsf_guess="`echo \"$0\" | sed 's/config.guess$/configfsf.guess/'`"
if test "$configfsf_guess" = "$0"; then
echo "Cannot derive configfsf.guess from $0" 1>&2
exit 1
fi
if test -f "$configfsf_guess"; then
:
else
echo "$configfsf_guess not found" 1>&2
exit 1
fi
# Setup a $SHELL with which to run configfsf.guess, using the same
# $CONFIG_SHELL or /bin/sh as autoconf does when running config.guess
SHELL=${CONFIG_SHELL-/bin/sh}
# Identify ourselves on --version, --help or errors
if test $# != 0; then
echo "(GNU MP wrapped config.guess)"
$SHELL $configfsf_guess "$@"
exit 1
fi
guess_full=`$SHELL $configfsf_guess`
if test $? != 0; then
exit 1
fi
guess_cpu=`echo "$guess_full" | sed 's/-.*$//'`
guess_rest=`echo "$guess_full" | sed 's/^[^-]*//'`
exact_cpu=
# -------------------------------------------------------------------------
# The following should look at the current guess and probe the system to
# establish a better guess in exact_cpu. Leave exact_cpu empty if probes
# can't be done, or don't work.
#
# When a number of probes are done, test -z "$exact_cpu" can be used instead
# of putting each probe under an "else" of the preceeding. That can stop
# the code getting horribly nested and marching off the right side of the
# screen.
# Note that when a compile-and-link is done in one step we need to remove .o
# files, since lame C compilers generate these even when not asked.
#
# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
# compiler to aid in system detection is discouraged as it requires
# temporary files to be created and, as you can see below, it is a
# headache to deal with in a portable fashion.
# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
# use `HOST_CC' if defined, but it is deprecated.
# Portable tmp directory creation inspired by the Autoconf team.
set_cc_for_build='
trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
: ${TMPDIR=/tmp} ;
{ tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
{ test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
{ tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
{ echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
dummy=$tmp/dummy ;
tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy $dummy.core ${dummy}0.s" ;
case $CC_FOR_BUILD,$HOST_CC,$CC in
,,) echo "int x;" > $dummy.c ;
for c in cc gcc c89 c99 ; do
if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
CC_FOR_BUILD="$c"; break ;
fi ;
done ;
if test x"$CC_FOR_BUILD" = x ; then
CC_FOR_BUILD=no_compiler_found ;
fi
;;
,,*) CC_FOR_BUILD=$CC ;;
,*,*) CC_FOR_BUILD=$HOST_CC ;;
esac ; set_cc_for_build= ;'
case "$guess_full" in
alpha-*-*)
eval $set_cc_for_build
# configfsf.guess detects exact alpha cpu types for OSF and GNU/Linux, but
# not for *BSD and other systems. We try to get an exact type for any
# plain "alpha" it leaves.
#
# configfsf.guess used to have a block of code not unlike this, but these
# days does its thing with Linux kernel /proc/cpuinfo or OSF psrinfo.
#
cat <<EOF >${dummy}0.s
.data
Lformat:
.byte 37,100,45,37,120,10,0 # "%d-%x\n"
.text
.globl main
.align 4
.ent main
main:
.frame \$30,16,\$26,0
ldgp \$29,0(\$27)
.prologue 1
.long 0x47e03d91 # implver \$17
lda \$2,-1
.long 0x47e20c21 # amask \$2,\$1
lda \$16,Lformat
not \$1,\$18
jsr \$26,printf
ldgp \$29,0(\$26)
mov 0,\$16
jsr \$26,exit
.end main
EOF
$CC_FOR_BUILD ${dummy}0.s -o $dummy 2>/dev/null
if test "$?" = 0 ; then
case `$dummy` in
0-0) exact_cpu=alpha ;;
1-0) exact_cpu=alphaev5 ;;
1-1) exact_cpu=alphaev56 ;;
1-101) exact_cpu=alphapca56 ;;
2-303) exact_cpu=alphaev6 ;;
2-307) exact_cpu=alphaev67 ;;
2-1307) exact_cpu=alphaev68 ;;
esac
fi
;;
arm*-*-* | aarch64-*-*)
if [ $( (uname -s) 2>/dev/null) = Darwin ]; then
case $(system_profiler SPHardwareDataType | grep Chip) in
*Apple\ M1)
exact_cpu="applem1";;
*Apple\ M2)
exact_cpu="applem2";;
esac
fi
cpu_code=`sed -n 's/^CPU part.*\(0x.*\)$/\1/p' /proc/cpuinfo 2>/dev/null | sort -r | head -n 1 2>/dev/null`
cpu_implementer=`sed -n 's/^CPU implementer.*\(0x.*\)$/\1/p' /proc/cpuinfo 2>/dev/null | head -n 1 2>/dev/null`
case "${cpu_implementer}_${cpu_code}" in
0x53_0x001) exact_cpu=armexynosm1 ;;
0x51_0x800) exact_cpu=armcortexa57 ;;
0x43_0x0a1) exact_cpu=armthunderx ;;
0x50_0x000) exact_cpu=armxgene1 ;;
0x61_0x023) exact_cpu=applem1 ;;
esac
if test -z "$exact_cpu"; then
case "$cpu_code" in
0xa10 | 0xa11 | 0xb11) # v4 strongarm/sa1100
exact_cpu="armsa1";;
0x915 | 0x925 | \
0x920 | 0x922 | 0x940) # v4
exact_cpu="arm9tdmi";;
0x210 | 0x290 | 0x2d0 | \
0x212 | 0x292 | 0x2d2 | \
0x411) exact_cpu="armxscale";; # v5 pxa2xx
0x926 | 0x946 | 0x966 | 0x968) # v5te/v5tej
exact_cpu="arm9te";;
0xa20 | 0xa22 | 0xa26) # v5te
exact_cpu="arm10";;
0xb02) exact_cpu="arm11mpcore";; # v6
0xb36) exact_cpu="arm1136";; # v6
0xb56) exact_cpu="arm1156";; # v6t2
0xb76) exact_cpu="arm1176";; # v6
0xc05) exact_cpu="armcortexa5";; # v7a
0xc07) exact_cpu="armcortexa7";; # v7a
0xc08) exact_cpu="armcortexa8";; # v7a
0xc09) exact_cpu="armcortexa9";; # v7a
0xc0f) exact_cpu="armcortexa15";; # v7a
0xc0d) exact_cpu="armcortexa12";; # v7a
0xc0e) exact_cpu="armcortexa17";; # v7a
0xc14) exact_cpu="armcortexr4";; # v7r
0xc15) exact_cpu="armcortexr5";; # v7r
0xc23) exact_cpu="armcortexm3";; # v7m
0xd04) exact_cpu="armcortexa35";; # v8
0xd03) exact_cpu="armcortexa53";; # v8
0xd05) exact_cpu="armcortexa55";; # v8.2
0xd07) exact_cpu="armcortexa57";; # v8
0xd08) exact_cpu="armcortexa72";; # v8
0xd09) exact_cpu="armcortexa73";; # v8
0xd0a) exact_cpu="armcortexa75";; # v8.2
0xd0b) exact_cpu="armcortexa76";; # v8.3
*) exact_cpu=$guess_cpu;;
esac
fi
exact_cpu="${exact_cpu}`sed -n 's;^Features.*\(neon\).*;\1;p' /proc/cpuinfo 2>/dev/null | head -n 1 2>/dev/null`"
;;
ia64*-*-*)
eval $set_cc_for_build
# CPUID[3] bits 24 to 31 is the processor family. itanium2 is documented
# as 0x1f, plain itanium has been seen returning 0x07 on two systems, but
# haven't found any documentation on it as such.
#
# Defining both getcpuid and _getcpuid lets us ignore whether the system
# expects underscores or not.
#
# "unsigned long long" is always 64 bits, in fact on hpux in ilp32 mode
# (which is the default there), it's the only 64-bit type.
#
cat >${dummy}0.s <<EOF
.text
.global _getcpuid
.proc _getcpuid
_getcpuid:
mov r8 = CPUID[r32] ;;
br.ret.sptk.many rp ;;
.endp _getcpuid
.global getcpuid
.proc getcpuid
getcpuid:
mov r8 = CPUID[r32] ;;
br.ret.sptk.many rp ;;
.endp getcpuid
EOF
cat >$dummy.c <<EOF
#include <stdio.h>
unsigned long long getcpuid ();
int
main ()
{
if (getcpuid(0LL) == 0x49656E69756E6547LL && getcpuid(1LL) == 0x6C65746ELL)
{
/* "GenuineIntel" */
switch ((getcpuid(3LL) >> 24) & 0xFF) {
case 0x07: puts ("itanium"); break;
case 0x1F: puts ("itanium2"); break; /* McKinley, Madison */
case 0x20: puts ("itanium2"); break; /* Montecito, Montvale, Tukwila */
case 0x21: puts ("itanium2"); break; /* Poulson */
}
}
return 0;
}
EOF
if $CC_FOR_BUILD ${dummy}0.s $dummy.c -o $dummy >/dev/null 2>&1; then
exact_cpu=`$dummy`
fi
;;
mips-*-irix[6789]*)
# IRIX 6 and up always has a 64-bit mips cpu
exact_cpu=mips64
;;
mips-*-*)
case $(uname -m) in
mips64) exact_cpu=mips64;;
esac
;;
mipsel-*-*)
case $(uname -m) in
mips64) exact_cpu=mips64el;;
esac
;;
m68k-*-*)
eval $set_cc_for_build
# NetBSD (and presumably other *BSD) "sysctl hw.model" gives for example
# hw.model = Apple Macintosh Quadra 610 (68040)
exact_cpu=`(sysctl hw.model) 2>/dev/null | sed -n 's/^.*\(680[012346]0\).*$/m\1/p'`
if test -z "$exact_cpu"; then
# Linux kernel 2.2 gives for example "CPU: 68020" (tabs in between).
exact_cpu=`sed -n 's/^CPU:.*\(680[012346]0\).*$/m\1/p' /proc/cpuinfo 2>/dev/null`
fi
if test -z "$exact_cpu"; then
# Try: movel #0,%d0; rts
# This is to check the compiler and our asm code works etc, before
# assuming failures below indicate cpu characteristics.
# .byte is used to avoid problems with assembler syntax variations.
# For testing, provoke failures by adding "illegal" possibly as
# ".byte 0x4A, 0xFC"
cat >${dummy}0.s <<EOF
.text
.globl main
.globl _main
main:
_main:
.byte 0x70, 0x00
.byte 0x4e, 0x75
EOF
if ($CC_FOR_BUILD ${dummy}0.s -o $dummy && $dummy) >/dev/null 2>&1; then
# $SHELL -c is used to execute $dummy below, since ($dummy)
# 2>/dev/null still prints the SIGILL message on some shells.
#
# Try: movel #0,%d0
# rtd #0
cat >${dummy}0.s <<EOF
.text
.globl main
.globl _main
main:
_main:
.byte 0x70, 0x00
.byte 0x4e, 0x74, 0x00, 0x00
EOF
if $CC_FOR_BUILD ${dummy}0.s -o $dummy >/dev/null 2>&1; then
$SHELL -c $dummy >/dev/null 2>&1
if test $? != 0; then
exact_cpu=m68000 # because rtd didn't work
fi
fi
#
if test -z "$exact_cpu"; then
# Try: trapf
# movel #0,%d0
# rts
# Another possibility for identifying 68000 and 68010 is the
# different value stored by "movem a0,(a0)+"
cat >${dummy}0.s <<EOF
.text
.globl main
.globl _main
main:
_main:
.byte 0x51, 0xFC
.byte 0x70, 0x00
.byte 0x4e, 0x75
EOF
if $CC_FOR_BUILD ${dummy}0.s -o $dummy >/dev/null 2>&1; then
$SHELL -c $dummy >/dev/null 2>&1
if test $? != 0; then
exact_cpu=m68010 # because trapf didn't work
fi
fi
fi
if test -z "$exact_cpu"; then
# Try: bfffo %d1{0:31},%d0
# movel #0,%d0
# rts
cat >${dummy}0.s <<EOF
.text
.globl main
.globl _main
main:
_main:
.byte 0xED, 0xC1, 0x00, 0x1F
.byte 0x70, 0x00
.byte 0x4e, 0x75
EOF
if $CC_FOR_BUILD ${dummy}0.s -o $dummy >/dev/null 2>&1; then
$SHELL -c $dummy >/dev/null 2>&1
if test $? != 0; then
exact_cpu=m68360 # cpu32, because bfffo didn't work
fi
fi
fi
if test -z "$exact_cpu"; then
# FIXME: Now we know 68020 or up, but how to detect 030, 040 and 060?
exact_cpu=m68020
fi
fi
fi
if test -z "$exact_cpu"; then
case "$guess_full" in
*-*-next* | *-*-openstep*) # NeXTs are 68020 or better
exact_cpu=m68020 ;;
esac
fi
;;
rs6000-*-* | powerpc*-*-*)
# Enhancement: On MacOS the "machine" command prints for instance
# "ppc750". Interestingly on powerpc970-apple-darwin6.8.5 it prints
# "ppc970" where there's no actual #define for 970 from NXGetLocalArchInfo
# (as noted below). But the man page says the command is still "under
# development", so it doesn't seem wise to use it just yet, not while
# there's an alternative.
# Try to read the PVR. mfpvr is a protected instruction, NetBSD, MacOS and
# AIX don't allow it in user mode, but the Linux kernel does. We prefer this
# to /proc/cpuinfo since the latter lags for newer CPUs.
#
# Note this is no good on AIX, since a C function there is the address of
# a function descriptor, not actual code. But this doesn't matter since
# AIX doesn't allow mfpvr anyway.
#
if test -z "$exact_cpu"; then
eval $set_cc_for_build
cat >$dummy.c <<\EOF
#include <stdio.h>
int
main ()
{
unsigned pvr;
asm ("mfpvr %0" : "=r" (pvr));
switch (pvr >> 16) {
case 0x0001: puts ("powerpc601"); break;
case 0x0003: puts ("powerpc603"); break;
case 0x0004: puts ("powerpc604"); break;
case 0x0006: puts ("powerpc603e"); break;
case 0x0007: puts ("powerpc603e"); break; /* 603ev */
case 0x0008: puts ("powerpc750"); break;
case 0x0009: puts ("powerpc604e"); break;
case 0x000a: puts ("powerpc604e"); break; /* 604ev5 */
case 0x000c: puts ("powerpc7400"); break;
case 0x0041: puts ("powerpc630"); break;
case 0x003f: puts ("power7"); break;
case 0x004b:
case 0x004c:
case 0x004d: puts ("power8"); break;
case 0x004e: puts ("power9"); break;
case 0x0080: puts ("power10"); break;
case 0x0050: puts ("powerpc860"); break;
case 0x8000: puts ("powerpc7450"); break;
case 0x8001: puts ("powerpc7455"); break;
case 0x8002: puts ("powerpc7457"); break;
case 0x8003: puts ("powerpc7447"); break; /* really 7447A */
case 0x800c: puts ("powerpc7410"); break;
}
return 0;
}
EOF
if ($CC_FOR_BUILD $dummy.c -o $dummy) >/dev/null 2>&1; then
# This style construct is needed on AIX 4.3 to suppress the SIGILL error
# from (*fun)(). Using $SHELL -c $dummy 2>/dev/null doesn't work.
{ x=`$dummy`; } 2>/dev/null
if test -n "$x"; then
exact_cpu=$x
fi
fi
fi
# Grep the /proc/cpuinfo pseudo-file.
# Anything unrecognised is ignored, since of course we mustn't spit out
# a cpu type config.sub doesn't know.
if test -z "$exact_cpu" && test -f /proc/cpuinfo; then
x=`grep "^cpu[ ]" /proc/cpuinfo | head -n 1`
x=`echo $x | sed -n 's/^cpu[ ]*:[ ]*\([A-Za-z0-9]*\).*/\1/p'`
x=`echo $x | sed 's/PPC//'`
case $x in
601) exact_cpu="power" ;;
603ev) exact_cpu="powerpc603e" ;;
604ev5) exact_cpu="powerpc604e" ;;
970??) exact_cpu="powerpc970" ;;
603 | 603e | 604 | 604e | 750 | 821 | 860)
exact_cpu="powerpc$x" ;;
POWER[4-9]*)
exact_cpu=`echo $x | sed -e "s;POWER;power;" -e "s;[a-zA-Z]*$;;"` ;;
esac
fi
if test -z "$exact_cpu"; then
# On AIX, try looking at _system_configuration. This is present in
# version 4 at least.
cat >$dummy.c <<EOF
#include <stdio.h>
#include <sys/systemcfg.h>
int
main ()
{
switch (_system_configuration.implementation) {
/* Old versions of AIX don't have all these constants,
use ifdef for safety. */
#ifdef POWER_RS2
case POWER_RS2: puts ("power2"); break;
#endif
#ifdef POWER_601
case POWER_601: puts ("power"); break;
#endif
#ifdef POWER_603
case POWER_603: puts ("powerpc603"); break;
#endif
#ifdef POWER_604
case POWER_604: puts ("powerpc604"); break;
#endif
#ifdef POWER_620
case POWER_620: puts ("powerpc620"); break;
#endif
#ifdef POWER_630
case POWER_630: puts ("powerpc630"); break;
#endif
/* Dunno what this is, leave it out for now.
case POWER_A35: puts ("powerpca35"); break;
*/
/* This is waiting for a bit more info.
case POWER_RS64II: puts ("powerpcrs64ii"); break;
*/
#ifdef POWER_4
case POWER_4: puts ("power4"); break;
#endif
#ifdef POWER_5
case POWER_5: puts ("power5"); break;
#endif
#ifdef POWER_6
case POWER_6: puts ("power6"); break;
#endif
#ifdef POWER_7
case POWER_7: puts ("power7"); break;
#endif
#ifdef POWER_8
case POWER_8: puts ("power8"); break;
#endif
#ifdef POWER_9
case POWER_9: puts ("power9"); break;
#endif
default:
if (_system_configuration.architecture == POWER_RS)
puts ("power");
else if (_system_configuration.width == 64)
puts ("powerpc64");
}
return 0;
}
EOF
if ($CC_FOR_BUILD $dummy.c -o $dummy) >/dev/null 2>&1; then
x=`$dummy`
if test -n "$x"; then
exact_cpu=$x
fi
fi
fi
if test -z "$exact_cpu"; then
# On MacOS X (or any Mach-O presumably), NXGetLocalArchInfo cpusubtype
# can tell us the exact cpu.
cat >$dummy.c <<EOF
#include <stdio.h>
#include <mach-o/arch.h>
int
main (void)
{
const NXArchInfo *a = NXGetLocalArchInfo();
if (a->cputype == CPU_TYPE_POWERPC)
{
switch (a->cpusubtype) {
/* The following known to Darwin 1.3. */
case CPU_SUBTYPE_POWERPC_601: puts ("powerpc601"); break;
case CPU_SUBTYPE_POWERPC_602: puts ("powerpc602"); break;
case CPU_SUBTYPE_POWERPC_603: puts ("powerpc603"); break;
case CPU_SUBTYPE_POWERPC_603e: puts ("powerpc603e"); break;
case CPU_SUBTYPE_POWERPC_603ev: puts ("powerpc603e"); break;
case CPU_SUBTYPE_POWERPC_604: puts ("powerpc604"); break;
case CPU_SUBTYPE_POWERPC_604e: puts ("powerpc604e"); break;
case CPU_SUBTYPE_POWERPC_620: puts ("powerpc620"); break;
case CPU_SUBTYPE_POWERPC_750: puts ("powerpc750"); break;
case CPU_SUBTYPE_POWERPC_7400: puts ("powerpc7400"); break;
case CPU_SUBTYPE_POWERPC_7450: puts ("powerpc7450"); break;
/* Darwin 6.8.5 doesn't define the following */
case 0x8001: puts ("powerpc7455"); break;
case 0x8002: puts ("powerpc7457"); break;
case 0x8003: puts ("powerpc7447"); break;
case 100: puts ("powerpc970"); break;
}
}
return 0;
}
EOF
if ($CC_FOR_BUILD $dummy.c -o $dummy) >/dev/null 2>&1; then
x=`$dummy`
if test -n "$x"; then
exact_cpu=$x
fi
fi
fi
;;
sparc-*-* | sparc64-*-*)
# If we can recognise an actual v7 then $exact_cpu is set to "sparc" so as
# to short-circuit subsequent tests.
# Grep the linux kernel /proc/cpuinfo pseudo-file.
# A typical line is "cpu\t\t: TI UltraSparc II (BlackBird)"
# See arch/sparc/kernel/cpu.c and arch/sparc64/kernel/cpu.c.
#
if test -f /proc/cpuinfo; then
if grep 'cpu.*Cypress' /proc/cpuinfo >/dev/null; then
exact_cpu="sparc" # ie. v7
elif grep 'cpu.*Power-UP' /proc/cpuinfo >/dev/null; then
exact_cpu="sparc" # ie. v7
elif grep 'cpu.*HyperSparc' /proc/cpuinfo >/dev/null; then
exact_cpu="sparcv8"
elif grep 'cpu.*SuperSparc' /proc/cpuinfo >/dev/null; then
exact_cpu="supersparc"
elif grep 'cpu.*MicroSparc' /proc/cpuinfo >/dev/null; then
exact_cpu="microsparc"
elif grep 'cpu.*MB86904' /proc/cpuinfo >/dev/null; then
# actually MicroSPARC-II
exact_cpu=microsparc
elif grep 'cpu.*UltraSparc T5' /proc/cpuinfo >/dev/null; then
exact_cpu="ultrasparct5"
elif grep 'cpu.*UltraSparc T4' /proc/cpuinfo >/dev/null; then
exact_cpu="ultrasparct4"
elif grep 'cpu.*UltraSparc T3' /proc/cpuinfo >/dev/null; then
exact_cpu="ultrasparct3"
elif grep 'cpu.*UltraSparc T2' /proc/cpuinfo >/dev/null; then
exact_cpu="ultrasparct2"
elif grep 'cpu.*UltraSparc T1' /proc/cpuinfo >/dev/null; then
exact_cpu="ultrasparct1"
elif grep 'cpu.*UltraSparc III' /proc/cpuinfo >/dev/null; then
exact_cpu="ultrasparc3"
elif grep 'cpu.*UltraSparc IIi' /proc/cpuinfo >/dev/null; then
exact_cpu="ultrasparc2i"
elif grep 'cpu.*UltraSparc II' /proc/cpuinfo >/dev/null; then
exact_cpu="ultrasparc2"
elif grep 'cpu.*UltraSparc' /proc/cpuinfo >/dev/null; then
exact_cpu="ultrasparc"
fi
fi
# Need to invoke this for setup of $dummy
eval $set_cc_for_build
# Grep the output from sysinfo on SunOS.
# sysinfo has been seen living in /bin or in /usr/kvm
# cpu0 is a "SuperSPARC Model 41 SPARCmodule" CPU
# cpu0 is a "75 MHz TI,TMS390Z55" CPU
#
if test -z "$exact_cpu"; then
for i in sysinfo /usr/kvm/sysinfo; do
if $SHELL -c $i 2>/dev/null >$dummy; then
if grep 'cpu0 is a "SuperSPARC' $dummy >/dev/null; then
exact_cpu=supersparc
break
elif grep 'cpu0 is a .*TMS390Z5.' $dummy >/dev/null; then
# TMS390Z50 and TMS390Z55
exact_cpu=supersparc
break
fi
fi
done
fi
# Grep the output from prtconf on Solaris.
# Use an explicit /usr/sbin, since that directory might not be in a normal
# user's path.
#
# SUNW,UltraSPARC (driver not attached)
# SUNW,UltraSPARC-II (driver not attached)
# SUNW,UltraSPARC-IIi (driver not attached)
# SUNW,UltraSPARC-III+ (driver not attached)
# Ross,RT625 (driver not attached)
# TI,TMS390Z50 (driver not attached)
#
# /usr/sbin/sysdef prints similar information, but includes all loadable
# cpu modules, not just the real cpu.
#
# We first try a plain prtconf, since that is known to work on older systems.
# But for newer T1 systems, that doesn't produce any useful output, we need
# "prtconf -vp" there.
#
for prtconfopt in "" "-vp"; do
if test -z "$exact_cpu"; then
if $SHELL -c "/usr/sbin/prtconf $prtconfopt" 2>/dev/null >$dummy; then
if egrep '(SUNW|ORCL),(Ultra)?SPARC-T5' $dummy >/dev/null; then
exact_cpu=ultrasparct5
elif egrep '(SUNW|ORCL),(Ultra)?SPARC-T4' $dummy >/dev/null; then
exact_cpu=ultrasparct4
elif egrep '(SUNW|ORCL),(Ultra)?SPARC-T3' $dummy >/dev/null; then
exact_cpu=ultrasparct3
elif egrep '(SUNW|ORCL),(Ultra)?SPARC-T2' $dummy >/dev/null; then
exact_cpu=ultrasparct2
elif egrep '(SUNW|ORCL),(Ultra)?SPARC-T1' $dummy >/dev/null; then
exact_cpu=ultrasparct1
elif egrep '(SUNW|ORCL),(Ultra)?SPARC-III' $dummy >/dev/null; then
exact_cpu=ultrasparc3
elif egrep '(SUNW|ORCL),(Ultra)?SPARC-IIi' $dummy >/dev/null; then
exact_cpu=ultrasparc2i
elif egrep '(SUNW|ORCL),(Ultra)?SPARC-II' $dummy >/dev/null; then
exact_cpu=ultrasparc2
elif egrep '(SUNW|ORCL),(Ultra)?SPARC' $dummy >/dev/null; then
exact_cpu=ultrasparc
elif grep 'Ross,RT62.' $dummy >/dev/null; then
# RT620, RT625, RT626 hypersparcs (v8).
exact_cpu=sparcv8
elif grep 'TI,TMS390Z5.' $dummy >/dev/null; then
# TMS390Z50 and TMS390Z55
exact_cpu=supersparc
elif grep 'TI,TMS390S10' $dummy >/dev/null; then
exact_cpu=microsparc
elif grep 'FMI,MB86904' $dummy >/dev/null; then
# actually MicroSPARC-II
exact_cpu=microsparc
fi
fi
fi
done
# Grep the output from sysctl hw.model on sparc or sparc64 *BSD.
# Use an explicit /sbin, since that directory might not be in a normal
# user's path. Example outputs,
#
# hw.model: Sun Microsystems UltraSparc-IIi
#
if test -z "$exact_cpu"; then
if $SHELL -c "/sbin/sysctl hw.model" 2>/dev/null >$dummy; then
if grep -i 'UltraSparc-T5' $dummy >/dev/null; then
exact_cpu=ultrasparct5
elif grep -i 'UltraSparc-T4' $dummy >/dev/null; then
exact_cpu=ultrasparct4
elif grep -i 'UltraSparc-T3' $dummy >/dev/null; then
exact_cpu=ultrasparct3
elif grep -i 'UltraSparc-T2' $dummy >/dev/null; then
exact_cpu=ultrasparct2
elif grep -i 'UltraSparc-T1' $dummy >/dev/null; then
exact_cpu=ultrasparct1
elif grep -i 'UltraSparc-III' $dummy >/dev/null; then
exact_cpu=ultrasparc3
elif grep -i 'UltraSparc-IIi' $dummy >/dev/null; then
exact_cpu=ultrasparc2i
elif grep -i 'UltraSparc-II' $dummy >/dev/null; then
exact_cpu=ultrasparc2
elif grep -i 'UltraSparc' $dummy >/dev/null; then
exact_cpu=ultrasparc
elif grep 'TMS390Z5.' $dummy >/dev/null; then
# TMS390Z50 and TMS390Z55
exact_cpu=supersparc
elif grep 'TMS390S10' $dummy >/dev/null; then
exact_cpu=microsparc
elif grep 'MB86904' $dummy >/dev/null; then
# actually MicroSPARC-II
exact_cpu=microsparc
elif grep 'MB86907' $dummy >/dev/null; then
exact_cpu=turbosparc
fi
fi
fi
# sun4m and sun4d are v8s of some sort, sun4u is a v9 of some sort
#
if test -z "$exact_cpu"; then
case `uname -m` in
sun4[md]) exact_cpu=sparcv8 ;;
sun4u) exact_cpu=sparcv9 ;;
esac
fi
;;
# Recognise x86 processors using a tricky cpuid with 4 arguments, repeating
# arguments; for x86-64 we effectively pass the 1st in rdx and the 2nd in rcx.
# This allows the same asm to work for both standard and Windoze calling
# conventions.
i?86-*-* | amd64-*-* | x86_64-*-*)
eval $set_cc_for_build
cat <<EOF >$dummy.c
#include <string.h>
#include <stdio.h>
#define CPUID(a,b) cpuid(b,a,a,b)
#if __cplusplus
extern "C"
#endif
unsigned int cpuid (int, char *, char *, int);
int
gmp_workaround_skylake_cpuid_bug ()
{
char feature_string[49];
char processor_name_string[49];
static const char *bad_cpus[] = {" G44", " G45", " G39" /* , "6600" */ };
int i;
/* Example strings: */
/* "Intel(R) Pentium(R) CPU G4400 @ 3.30GHz" */
/* "Intel(R) Core(TM) i5-6600K CPU @ 3.50GHz" */
/* ^ ^ ^ */
/* 0x80000002 0x80000003 0x80000004 */
/* We match out just the 0x80000003 part here. */
/* In their infinitive wisdom, Intel decided to use one register order for
the vendor string, and another for the processor name string. We shuffle
things about here, rather than write a new variant of our assembly cpuid.
*/
unsigned int eax, ebx, ecx, edx;
eax = CPUID (feature_string, 0x80000003);
ebx = ((unsigned int *)feature_string)[0];
edx = ((unsigned int *)feature_string)[1];
ecx = ((unsigned int *)feature_string)[2];
((unsigned int *) (processor_name_string))[0] = eax;
((unsigned int *) (processor_name_string))[1] = ebx;
((unsigned int *) (processor_name_string))[2] = ecx;
((unsigned int *) (processor_name_string))[3] = edx;
processor_name_string[16] = 0;
for (i = 0; i < sizeof (bad_cpus) / sizeof (char *); i++)
{
if (strstr (processor_name_string, bad_cpus[i]) != 0)
return 1;
}
return 0;
}
int
main ()
{
char vendor_string[13];
char feature_string[12];
long fms;
int family, model;
const char *modelstr, *suffix;
int cpu_64bit = 0, cpu_avx = 0;
int cpuid_64bit, cpuid_avx, cpuid_osxsave;
CPUID (vendor_string, 0);
vendor_string[12] = 0;
fms = CPUID (feature_string, 1);
family = ((fms >> 8) & 0xf) + ((fms >> 20) & 0xff);
model = ((fms >> 4) & 0xf) + ((fms >> 12) & 0xf0);
cpuid_avx = (feature_string[11] >> 4) & 1;
cpuid_osxsave = (feature_string[11] >> 3) & 1;
modelstr = "$guess_cpu";
/**************************************************/
/*** WARNING: keep this list in sync with fat.c ***/
/**************************************************/
if (strcmp (vendor_string, "GenuineIntel") == 0)
{
switch (family)
{
case 5:
if (model == 4 || model == 8) modelstr = "pentiummmx";
else modelstr = "pentium";
break;
case 6:
if (model <= 1) modelstr = "pentiumpro";
else if (model <= 6) modelstr = "pentium2";
else if (model <= 8) modelstr = "pentium3";
else if (model <= 9) modelstr = "pentiumm";
else if (model <= 0x0c) modelstr = "pentium3";
else if (model <= 0x0e) modelstr = "pentiumm";
else if (model <= 0x19) cpu_64bit = 1, modelstr = "core2";
else if (model == 0x1a) cpu_64bit = 1, modelstr = "nehalem"; /* NHM Gainestown */
else if (model == 0x1c) cpu_64bit = 1, modelstr = "atom"; /* Silverthorne */
else if (model == 0x1d) cpu_64bit = 1, modelstr = "core2"; /* PNR Dunnington */
else if (model == 0x1e) cpu_64bit = 1, modelstr = "nehalem"; /* NHM Lynnfield/Jasper */
else if (model == 0x25) cpu_64bit = 1, modelstr = "westmere"; /* WSM Clarkdale/Arrandale */
else if (model == 0x26) cpu_64bit = 1, modelstr = "atom"; /* Lincroft */
else if (model == 0x27) cpu_64bit = 1, modelstr = "atom"; /* Saltwell */
else if (model == 0x2a) cpu_64bit = 1, cpu_avx=1, modelstr = "sandybridge";/* SB */
else if (model == 0x2c) cpu_64bit = 1, modelstr = "westmere"; /* WSM Gulftown */
else if (model == 0x2d) cpu_64bit = 1, cpu_avx=1, modelstr = "sandybridge";/* SBC-EP */
else if (model == 0x2e) cpu_64bit = 1, modelstr = "nehalem"; /* NHM Beckton */
else if (model == 0x2f) cpu_64bit = 1, modelstr = "westmere"; /* WSM Eagleton */
else if (model == 0x36) cpu_64bit = 1, modelstr = "atom"; /* Cedarview/Saltwell */
else if (model == 0x37) cpu_64bit = 1, modelstr = "silvermont"; /* Silvermont */
else if (model == 0x3a) cpu_64bit = 1, cpu_avx=1, modelstr = "ivybridge"; /* IBR */
else if (model == 0x3c) cpu_64bit = 1, cpu_avx=1, modelstr = "haswell"; /* Haswell client */
else if (model == 0x3d) cpu_64bit = 1, cpu_avx=1, modelstr = "broadwell"; /* Broadwell */
else if (model == 0x3e) cpu_64bit = 1, cpu_avx=1, modelstr = "ivybridge"; /* Ivytown */
else if (model == 0x3f) cpu_64bit = 1, cpu_avx=1, modelstr = "haswell"; /* Haswell server */
else if (model == 0x45) cpu_64bit = 1, cpu_avx=1, modelstr = "haswell"; /* Haswell ULT */
else if (model == 0x46) cpu_64bit = 1, cpu_avx=1, modelstr = "haswell"; /* Crystal Well */
else if (model == 0x47) cpu_64bit = 1, cpu_avx=1, modelstr = "broadwell"; /* Broadwell */
else if (model == 0x4a) cpu_64bit = 1, modelstr = "silvermont"; /* Silvermont */
else if (model == 0x4c) cpu_64bit = 1, modelstr = "silvermont"; /* Airmont */
else if (model == 0x4d) cpu_64bit = 1, modelstr = "silvermont"; /* Silvermont/Avoton */
else if (model == 0x4e) cpu_64bit = 1, cpu_avx=1, modelstr = "skylake"; /* Skylake client */
else if (model == 0x4f) cpu_64bit = 1, cpu_avx=1, modelstr = "broadwell"; /* Broadwell server */
else if (model == 0x55) cpu_64bit = 1, cpu_avx=1, modelstr = "skylake"; /* Skylake server */
else if (model == 0x56) cpu_64bit = 1, cpu_avx=1, modelstr = "broadwell"; /* Broadwell microserver */
else if (model == 0x57) cpu_64bit = 1, modelstr = "knightslanding"; /* aka Xeon Phi */
else if (model == 0x5a) cpu_64bit = 1, modelstr = "silvermont"; /* Silvermont */
else if (model == 0x5c) cpu_64bit = 1, modelstr = "goldmont"; /* Goldmont */
else if (model == 0x5e) cpu_64bit = 1, cpu_avx=1, modelstr = "skylake"; /* Skylake */
else if (model == 0x5f) cpu_64bit = 1, modelstr = "goldmont"; /* Goldmont */
else if (model == 0x6a) cpu_64bit = 1, cpu_avx=1, modelstr = "icelake"; /* Ice Lake-DE */
else if (model == 0x6c) cpu_64bit = 1, cpu_avx=1, modelstr = "icelake"; /* Ice Lake-SP */
else if (model == 0x7a) cpu_64bit = 1, modelstr = "goldmont"; /* Goldmont Plus */
else if (model == 0x7d) cpu_64bit = 1, cpu_avx=1, modelstr = "icelake"; /* Ice Lake Y */
else if (model == 0x7e) cpu_64bit = 1, cpu_avx=1, modelstr = "icelake"; /* Ice Lake U */
else if (model == 0x8a) cpu_64bit = 1, modelstr = "tremont"; /* Tremont */
else if (model == 0x8c) cpu_64bit = 1, cpu_avx=1, modelstr = "tigerlake"; /* Tiger Lake U */
else if (model == 0x8d) cpu_64bit = 1, cpu_avx=1, modelstr = "tigerlake"; /* Tiger Lake H */
else if (model == 0x8e) cpu_64bit = 1, cpu_avx=1, modelstr = "kabylake"; /* Kaby Lake Y/U */
else if (model == 0x8f) cpu_64bit = 1, cpu_avx=1, modelstr = "alderlake"; /* Sapphire Rapids */
else if (model == 0x96) cpu_64bit = 1, modelstr = "tremont"; /* Tremont */
else if (model == 0x97) cpu_64bit = 1, cpu_avx=1, modelstr = "alderlake"; /* Alder Lake S */
else if (model == 0x9a) cpu_64bit = 1, cpu_avx=1, modelstr = "alderlake"; /* Alder Lake P */
else if (model == 0x9c) cpu_64bit = 1, modelstr = "tremont"; /* Tremont */
else if (model == 0x9e) cpu_64bit = 1, cpu_avx=1, modelstr = "kabylake"; /* Kaby Lake desktop */
else if (model == 0xa7) cpu_64bit = 1, cpu_avx=1, modelstr = "rocketlake"; /* Rocket Lake S */
else if (model == 0xba) cpu_64bit = 1, cpu_avx=1, modelstr = "raptorlake"; /* Raptor Lake */
else if (model == 0xb7) cpu_64bit = 1, cpu_avx=1, modelstr = "raptorlake"; /* Raptor Lake */
else cpu_64bit = 1, modelstr = "nehalem"; /* default */
if (strcmp (modelstr, "haswell") == 0 ||
strcmp (modelstr, "broadwell") == 0 ||
strcmp (modelstr, "skylake") == 0)
{
/* Some haswell, broadwell, skylake lack BMI2. Let them appear
as sandybridge for now. */
CPUID (feature_string, 7);
if ((feature_string[0 + 8 / 8] & (1 << (8 % 8))) == 0
|| gmp_workaround_skylake_cpuid_bug ())
modelstr = "sandybridge";
}
break;
case 15:
cpu_64bit = 1, modelstr = "pentium4";
break;
}
}
else if (strcmp (vendor_string, "AuthenticAMD") == 0)
{
switch (family)
{
case 5:
if (model <= 3) modelstr = "k5";
else if (model <= 7) modelstr = "k6";
else if (model == 8) modelstr = "k62";
else if (model == 9) modelstr = "k63";
else if (model == 10) modelstr = "geode";
else if (model == 13) modelstr = "k63";
break;
case 6:
modelstr = "athlon";
break;
case 15: /* K8, K9 */
cpu_64bit = 1, modelstr = "k8";
break;
case 16: /* K10 */
cpu_64bit = 1, modelstr = "k10";
break;
case 17: /* Hybrid k8/k10, claim k8 */
cpu_64bit = 1, modelstr = "k8";
break;
case 18: /* Llano, uses K10 core */
cpu_64bit = 1, modelstr = "k10";
break;
case 19: /* AMD Internal, assume future K10 */
cpu_64bit = 1, modelstr = "k10";
break;
case 20: /* Bobcat */
cpu_64bit = 1, modelstr = "bobcat";
break;
case 21: /* Bulldozer */
cpu_64bit = 1, cpu_avx = 1;
if (model <= 1)
modelstr = "bulldozer";
else if (model < 0x20) /* really 2, [0x10-0x20) */
modelstr = "piledriver";
else if (model < 0x40) /* really [0x30-0x40) */
modelstr = "steamroller";
else /* really [0x60-0x70) */
modelstr = "excavator";
break;
case 22: /* Jaguar, an improved bobcat */
cpu_64bit = 1, cpu_avx = 1, modelstr = "jaguar";
break;
case 23: /* Zen 1, 2 */
cpu_64bit = 1, cpu_avx = 1;
switch (model) {
case 1:
case 8:
case 17:
case 24:
modelstr = "zen";
break;
default:
modelstr = "zen2";
break;
}
break;
case 25: /* Zen 3, 4 */
cpu_64bit = 1, cpu_avx = 1;
switch (model) {
case 0x00:
case 0x01:
case 0x08:
case 0x21:
case 0x40:
case 0x44:
case 0x50:
modelstr = "zen3";
break;
default:
modelstr = "zen4";
break;
}
}
}
else if (strcmp (vendor_string, "HygonGenuine") == 0)
{
cpu_64bit = 1, cpu_avx = 1;
modelstr = "zen";
}
else if (strcmp (vendor_string, "CyrixInstead") == 0)
{
/* Should recognize Cyrix' processors too. */
}
else if (strcmp (vendor_string, "CentaurHauls") == 0)
{
switch (family)
{
case 6:
if (model < 9) modelstr = "viac3";
else if (model < 15) modelstr = "viac32";
else cpu_64bit = 1, modelstr = "nano";
break;
}
}
CPUID (feature_string, 0x80000001);
cpuid_64bit = (feature_string[7] >> 5) & 1;
suffix = "";
if (cpuid_64bit && ! cpu_64bit)
/* If our cpuid-based CPU identification thinks this is a 32-bit CPU but
cpuid claims AMD64 capabilities, then revert to the generic "x86_64".
This is of course wrong, but it can happen in some virtualisers and
emulators, and this workaround allows for successful 64-bit builds. */
modelstr = "x86_64";
else if (cpu_avx && ! (cpuid_avx && cpuid_osxsave))
/* For CPUs nominally capable of executing AVX, append "noavx" when not
both the AVX and OSXSAVE cpuid bits are set. We tolerate weirdness
here, as some virtualisers set a broken cpuid state, while other
virtualisers allow guests to set a broken state. */
suffix = "noavx";
printf ("%s%s", modelstr, suffix);
return 0;
}
EOF
# The rcx/ecx zeroing here and in the variant below is needed for the BMI2
# check.
cat <<EOF >${dummy}0.s
.globl cpuid
.globl _cpuid
cpuid:
_cpuid:
push %rbx
mov %rdx, %r8
mov %ecx, %eax
xor %ecx, %ecx
.byte 0x0f
.byte 0xa2
mov %ebx, (%r8)
mov %edx, 4(%r8)
mov %ecx, 8(%r8)
pop %rbx
ret
EOF
if ($CC_FOR_BUILD ${dummy}0.s $dummy.c -o $dummy) >/dev/null 2>&1; then
# On 80386 and early 80486 cpuid is not available and will result in a
# SIGILL message, hence 2>/dev/null.
#
# On i386-unknown-freebsd4.9, "/bin/sh -c ./dummy" seems to send an
# "Illegal instruction (core dumped)" message to stdout, so we test $?
# to check if the program run was successful.
#
x=`$SHELL -c $dummy 2>/dev/null`
if test $? = 0 && test -n "$x"; then
exact_cpu=$x
fi
fi
cat <<EOF >${dummy}0.s
.globl cpuid
.globl _cpuid
cpuid:
_cpuid:
pushl %esi
pushl %ebx
movl 24(%esp),%eax
xor %ecx, %ecx
.byte 0x0f
.byte 0xa2
movl 20(%esp),%esi
movl %ebx,(%esi)
movl %edx,4(%esi)
movl %ecx,8(%esi)
popl %ebx
popl %esi
ret
EOF
if test -z "$exact_cpu"; then
if ($CC_FOR_BUILD ${dummy}0.s $dummy.c -o $dummy) >/dev/null 2>&1; then
# On 80386 and early 80486 cpuid is not available and will result in a
# SIGILL message, hence 2>/dev/null.
#
# On i386-unknown-freebsd4.9, "/bin/sh -c ./dummy" seems to send an
# "Illegal instruction (core dumped)" message to stdout, so we test $?
# to check if the program run was successful.
#
x=`$SHELL -c $dummy 2>/dev/null`
if test $? = 0 && test -n "$x"; then
exact_cpu=$x
fi
fi
fi
# We need to remove some .o files here since lame C compilers
# generate these even when not asked.
;;
s390*-*-*)
if test -f /proc/cpuinfo; then
model=`grep "^processor 0: version =" /proc/cpuinfo | sed -e 's/.*machine = //'`
case $model in
2064 | 2066) zcpu="z900" ;;
2084 | 2086) zcpu="z990" ;;
2094 | 2096) zcpu="z9" ;;
2097 | 2098) zcpu="z10" ;;
2817 | 2818 | *) zcpu="z196" ;;
esac
if grep "^features.* vxp2" /proc/cpuinfo >/dev/null; then
zcpu="z16"
elif grep "^features.* vxe2" /proc/cpuinfo >/dev/null; then
zcpu="z15"
elif grep "^features.* vxe" /proc/cpuinfo >/dev/null; then
zcpu="z14"
elif grep "^features.* vx" /proc/cpuinfo >/dev/null; then
zcpu="z13"
fi
case "$guess_full" in
s390x-*-*) exact_cpu=${zcpu} ;;
s390-*-*) exact_cpu=${zcpu}esa ;;
esac
fi
;;
esac
# -------------------------------------------------------------------------
# Use an exact cpu, if possible
if test -n "$exact_cpu"; then
echo "$exact_cpu$guess_rest"
else
echo "$guess_full"
fi
exit 0
# Local variables:
# fill-column: 76
# End:
[ Dauer der Verarbeitung: 0.19 Sekunden
(vorverarbeitet)
]
|
2026-04-02
|
|
|
|
|
