# Makefile.in generated by automake 1.15 from Makefile.am.
# @configure_input@
# Copyright (C) 1994-2014 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
# Copyright 2000-2003, 2005-2011 Free Software Foundation, Inc.
#
# This file is part of the GNU MP Library.
#
# The GNU MP Library is free software; you can redistribute it and/or modify
# it under the terms of either:
#
# * the GNU Lesser General Public License as published by the Free
# Software Foundation; either version 3 of the License, or (at your
# option) any later version.
#
# or
#
# * the GNU General Public License as published by the Free Software
# Foundation; either version 2 of the License, or (at your option) any
# later version.
#
# or both in parallel, as here.
#
# The GNU MP Library is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
# for more details.
#
# You should have received copies of the GNU General Public License and the
# GNU Lesser General Public License along with the GNU MP Library. If not,
# see
https://www.gnu.org/licenses/.
# Copyright 1996, 1998-2002 Free Software Foundation, Inc.
#
# This file is part of the GNU MP Library.
#
# The GNU MP Library is free software; you can redistribute it and/or modify
# it under the terms of either:
#
# * the GNU Lesser General Public License as published by the Free
# Software Foundation; either version 3 of the License, or (at your
# option) any later version.
#
# or
#
# * the GNU General Public License as published by the Free Software
# Foundation; either version 2 of the License, or (at your option) any
# later version.
#
# or both in parallel, as here.
#
# The GNU MP Library is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
# for more details.
#
# You should have received copies of the GNU General Public License and the
# GNU Lesser General Public License along with the GNU MP Library. If not,
# see
https://www.gnu.org/licenses/.
VPATH = @srcdir@
am__is_gnu_make = { \
if test -z '$(MAKELEVEL)'; then \
false; \
elif test -n '$(MAKE_HOST)'; then \
true; \
elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
true; \
else \
false; \
fi; \
}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
EXTRA_PROGRAMS = speed$(EXEEXT) speed-dynamic$(EXEEXT) \
speed-ext$(EXEEXT) tuneup$(EXEEXT) tune-gcd-p$(EXEEXT)
subdir = tune
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(noinst_HEADERS) \
$(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
am__DEPENDENCIES_1 =
am__DEPENDENCIES_2 = $(am__DEPENDENCIES_1) \
$(top_builddir)/tests/libtests.la $(top_builddir)/libgmp.la
am_libspeed_la_OBJECTS = common.lo divrem1div.lo divrem1inv.lo \
divrem2div.lo divrem2inv.lo div_qr_1n_pi1_1.lo \
div_qr_1n_pi1_2.lo div_qr_1n_pi1_3.lo div_qr_1n_pi1_4.lo \
div_qr_1_tune.lo freq.lo gcdext_single.lo gcdext_double.lo \
gcdextod.lo gcdextos.lo hgcd_lehmer.lo hgcd_appr_lehmer.lo \
hgcd_reduce_1.lo hgcd_reduce_2.lo jacbase1.lo jacbase2.lo \
jacbase3.lo jacbase4.lo hgcd2-1.lo hgcd2-2.lo hgcd2-3.lo \
hgcd2-4.lo hgcd2-5.lo mod_1_div.lo mod_1_inv.lo mod_1_1-1.lo \
mod_1_1-2.lo modlinv.lo noop.lo powm_mod.lo powm_redc.lo \
pre_divrem_1.lo set_strb.lo set_strs.lo set_strp.lo time.lo
libspeed_la_OBJECTS = $(am_libspeed_la_OBJECTS)
AM_V_lt = $(am__v_lt_@AM_V@)
am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
am__v_lt_0 = --silent
am__v_lt_1 =
libspeed_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
$(libspeed_la_LDFLAGS) $(LDFLAGS) -o $@
am_speed_OBJECTS = speed.$(OBJEXT)
speed_OBJECTS = $(am_speed_OBJECTS)
speed_LDADD = $(LDADD)
speed_DEPENDENCIES = $(DEPENDENCIES) $(am__DEPENDENCIES_1)
speed_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
$(speed_LDFLAGS) $(LDFLAGS) -o $@
am_speed_dynamic_OBJECTS = speed.$(OBJEXT)
speed_dynamic_OBJECTS = $(am_speed_dynamic_OBJECTS)
speed_dynamic_LDADD = $(LDADD)
speed_dynamic_DEPENDENCIES = $(DEPENDENCIES) $(am__DEPENDENCIES_1)
am_speed_ext_OBJECTS = speed-ext.$(OBJEXT)
speed_ext_OBJECTS = $(am_speed_ext_OBJECTS)
speed_ext_LDADD = $(LDADD)
speed_ext_DEPENDENCIES = $(DEPENDENCIES) $(am__DEPENDENCIES_1)
speed_ext_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
$(speed_ext_LDFLAGS) $(LDFLAGS) -o $@
am_tune_gcd_p_OBJECTS = tune-gcd-p.$(OBJEXT)
tune_gcd_p_OBJECTS = $(am_tune_gcd_p_OBJECTS)
tune_gcd_p_LDADD = $(LDADD)
tune_gcd_p_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
$(tune_gcd_p_LDFLAGS) $(LDFLAGS) -o $@
am_tuneup_OBJECTS = tuneup.$(OBJEXT) hgcd2.$(OBJEXT)
am__objects_1 = div_qr_2.$(OBJEXT) bdiv_q.$(OBJEXT) bdiv_qr.$(OBJEXT) \
dcpi1_div_qr.$(OBJEXT) dcpi1_divappr_q.$(OBJEXT) \
dcpi1_bdiv_qr.$(OBJEXT) dcpi1_bdiv_q.$(OBJEXT) \
invertappr.$(OBJEXT) invert.$(OBJEXT) binvert.$(OBJEXT) \
divrem_2.$(OBJEXT) gcd.$(OBJEXT) gcdext.$(OBJEXT) \
get_str.$(OBJEXT) set_str.$(OBJEXT) matrix22_mul.$(OBJEXT) \
hgcd.$(OBJEXT) hgcd_appr.$(OBJEXT) hgcd_reduce.$(OBJEXT) \
mul_n.$(OBJEXT) sqr.$(OBJEXT) sec_powm.$(OBJEXT) \
mullo_n.$(OBJEXT) mul_fft.$(OBJEXT) mul.$(OBJEXT) \
tdiv_qr.$(OBJEXT) mulmod_bnm1.$(OBJEXT) sqrmod_bnm1.$(OBJEXT) \
mulmid.$(OBJEXT) mulmid_n.$(OBJEXT) toom42_mulmid.$(OBJEXT) \
sqrlo.$(OBJEXT) sqrlo_basecase.$(OBJEXT) \
nussbaumer_mul.$(OBJEXT) toom6h_mul.$(OBJEXT) \
toom8h_mul.$(OBJEXT) toom6_sqr.$(OBJEXT) toom8_sqr.$(OBJEXT) \
toom22_mul.$(OBJEXT) toom2_sqr.$(OBJEXT) toom33_mul.$(OBJEXT) \
toom3_sqr.$(OBJEXT) toom44_mul.$(OBJEXT) toom4_sqr.$(OBJEXT)
am__objects_2 = $(am__objects_1) divrem_1.$(OBJEXT) mod_1.$(OBJEXT)
nodist_tuneup_OBJECTS = sqr_basecase.$(OBJEXT) fac_ui.$(OBJEXT) \
$(am__objects_2)
tuneup_OBJECTS = $(am_tuneup_OBJECTS) $(nodist_tuneup_OBJECTS)
am__DEPENDENCIES_3 = $(am__DEPENDENCIES_1) libspeed.la
tuneup_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
$(tuneup_LDFLAGS) $(LDFLAGS) -o $@
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 =
DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
depcomp =
am__depfiles_maybe =
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
$(AM_CFLAGS) $(CFLAGS)
AM_V_CC = $(am__v_CC_@AM_V@)
am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
am__v_CC_0 = @echo " CC " $@;
am__v_CC_1 =
CCLD = $(CC)
LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
$(AM_LDFLAGS) $(LDFLAGS) -o $@
AM_V_CCLD = $(am__v_CCLD_@AM_V@)
am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
am__v_CCLD_0 = @echo " CCLD " $@;
am__v_CCLD_1 =
SOURCES = $(libspeed_la_SOURCES) $(speed_SOURCES) \
$(speed_dynamic_SOURCES) $(speed_ext_SOURCES) \
$(tune_gcd_p_SOURCES) $(tuneup_SOURCES) \
$(nodist_tuneup_SOURCES)
DIST_SOURCES = $(libspeed_la_SOURCES) $(speed_SOURCES) \
$(speed_dynamic_SOURCES) $(speed_ext_SOURCES) \
$(tune_gcd_p_SOURCES) $(tuneup_SOURCES)
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
HEADERS = $(noinst_HEADERS)
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates. Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
BEGIN { nonempty = 0; } \
{ items[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique. This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
list='$(am__tagged_files)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
am__DIST_COMMON = $(srcdir)/../mpn/Makeasm.am $(srcdir)/Makefile.in \
README
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ABI = @ABI@
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AS = @AS@
ASMFLAGS = @ASMFLAGS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CALLING_CONVENTIONS_OBJS = @CALLING_CONVENTIONS_OBJS@
CC = @CC@
CCAS = @CCAS@
CC_FOR_BUILD = @CC_FOR_BUILD@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CPP_FOR_BUILD = @CPP_FOR_BUILD@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFN_LONG_LONG_LIMB = @DEFN_LONG_LONG_LIMB@
DEFS = @DEFS@
DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
FGREP = @FGREP@
GMP_LDFLAGS = @GMP_LDFLAGS@
GMP_LIMB_BITS = @GMP_LIMB_BITS@
GMP_NAIL_BITS = @GMP_NAIL_BITS@
GREP = @GREP@
HAVE_CLOCK_01 = @HAVE_CLOCK_01@
HAVE_CPUTIME_01 = @HAVE_CPUTIME_01@
HAVE_GETRUSAGE_01 = @HAVE_GETRUSAGE_01@
HAVE_GETTIMEOFDAY_01 = @HAVE_GETTIMEOFDAY_01@
HAVE_HOST_CPU_FAMILY_power = @HAVE_HOST_CPU_FAMILY_power@
HAVE_HOST_CPU_FAMILY_powerpc = @HAVE_HOST_CPU_FAMILY_powerpc@
HAVE_SIGACTION_01 = @HAVE_SIGACTION_01@
HAVE_SIGALTSTACK_01 = @HAVE_SIGALTSTACK_01@
HAVE_SIGSTACK_01 = @HAVE_SIGSTACK_01@
HAVE_STACK_T_01 = @HAVE_STACK_T_01@
HAVE_SYS_RESOURCE_H_01 = @HAVE_SYS_RESOURCE_H_01@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LD = @LD@
LDFLAGS = @LDFLAGS@
LEX = @LEX@
LEXLIB = @LEXLIB@
LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
LIBCURSES = @LIBCURSES@
LIBGMPXX_LDFLAGS = @LIBGMPXX_LDFLAGS@
LIBGMP_DLL = @LIBGMP_DLL@
LIBGMP_LDFLAGS = @LIBGMP_LDFLAGS@
LIBM = @LIBM@
LIBM_FOR_BUILD = @LIBM_FOR_BUILD@
LIBOBJS = @LIBOBJS@
LIBREADLINE = @LIBREADLINE@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
M4 = @M4@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SPEED_CYCLECOUNTER_OBJ = @SPEED_CYCLECOUNTER_OBJ@
STRIP = @STRIP@
TAL_OBJECT = @TAL_OBJECT@
TUNE_LIBS = @TUNE_LIBS@
TUNE_SQR_OBJ = @TUNE_SQR_OBJ@
U_FOR_BUILD = @U_FOR_BUILD@
VERSION = @VERSION@
WITH_READLINE_01 = @WITH_READLINE_01@
YACC = @YACC@
YFLAGS = @YFLAGS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__leading_dot = @am__leading_dot@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
gmp_srclinks = @gmp_srclinks@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
mpn_objects = @mpn_objects@
mpn_objs_in_libgmp = @mpn_objs_in_libgmp@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
AM_CPPFLAGS = -I$(top_srcdir) -I$(top_srcdir)/tests
AM_LDFLAGS = -no-install
EXTRA_DIST = alpha.asm pentium.asm sparcv9.asm hppa.asm hppa2.asm hppa2w.asm \
ia64.asm powerpc.asm powerpc64.asm x86_64.asm many.pl
noinst_HEADERS = speed.h
@ENABLE_STATIC_FALSE@STATIC =
# Prefer -static on the speed and tune programs, since that can avoid
# overheads of shared library linkages on some systems. Libtool tends to
# botch -static if configured with --disable-static, perhaps reasonably
# enough. In any event under --disable-static the only choice is a dynamic
# link so there's no point in -static.
#
@ENABLE_STATIC_TRUE@STATIC = -static
EXTRA_LTLIBRARIES = libspeed.la
libspeed_la_SOURCES = \
common.c divrem1div.c divrem1inv.c divrem2div.c divrem2inv.c \
div_qr_1n_pi1_1.c div_qr_1n_pi1_2.c div_qr_1n_pi1_3.c \
div_qr_1n_pi1_4.c div_qr_1_tune.c \
freq.c \
gcdext_single.c gcdext_double.c gcdextod.c gcdextos.c \
hgcd_lehmer.c hgcd_appr_lehmer.c hgcd_reduce_1.c hgcd_reduce_2.c \
jacbase1.c jacbase2.c jacbase3.c jacbase4.c \
hgcd2-1.c hgcd2-2.c hgcd2-3.c hgcd2-4.c hgcd2-5.c \
mod_1_div.c mod_1_inv.c mod_1_1-1.c mod_1_1-2.c modlinv.c \
noop.c powm_mod.c powm_redc.c pre_divrem_1.c \
set_strb.c set_strs.c set_strp.c time.c
libspeed_la_DEPENDENCIES = $(SPEED_CYCLECOUNTER_OBJ) \
$(top_builddir)/tests/libtests.la $(top_builddir)/libgmp.la
libspeed_la_LIBADD = $(libspeed_la_DEPENDENCIES) $(LIBM)
libspeed_la_LDFLAGS = $(STATIC)
DEPENDENCIES = libspeed.la
LDADD = $(DEPENDENCIES) $(TUNE_LIBS)
speed_SOURCES = speed.c
speed_LDFLAGS = $(STATIC)
speed_dynamic_SOURCES = speed.c
speed_ext_SOURCES = speed-ext.c
speed_ext_LDFLAGS = $(STATIC)
tuneup_SOURCES = tuneup.c hgcd2.c
nodist_tuneup_SOURCES = sqr_basecase.c fac_ui.c $(TUNE_MPN_SRCS)
tuneup_DEPENDENCIES = $(TUNE_SQR_OBJ) libspeed.la
tuneup_LDADD = $(tuneup_DEPENDENCIES) $(TUNE_LIBS)
tuneup_LDFLAGS = $(STATIC)
tune_gcd_p_SOURCES = tune-gcd-p.c
tune_gcd_p_DEPENDENCIES = ../mpn/gcd.c
tune_gcd_p_LDFLAGS = $(STATIC)
# $(MANY_CLEAN) and $(MANY_DISTCLEAN) are hooks for many.pl
CLEANFILES = $(EXTRA_PROGRAMS) $(EXTRA_LTLIBRARIES) \
$(TUNE_MPN_SRCS) fac_ui.c sqr_asm.asm \
stg.gnuplot stg.data \
mtg.gnuplot mtg.data \
fibg.gnuplot fibg.data \
graph.gnuplot graph.data \
$(MANY_CLEAN)
DISTCLEANFILES = sqr_basecase.c $(MANY_DISTCLEAN)
# Generating these little files at build time seems better than including
# them in the distribution, since the list can be changed more easily.
#
# mpn/generic/tdiv_qr.c uses mpn_divrem_1 and mpn_divrem_2, but only for 1
# and 2 limb divisors, which are never used during tuning, so it doesn't
# matter whether it picks up a tuned or untuned version of those.
#
# divrem_1 and mod_1 are recompiled renamed to "_tune" to avoid a linking
# problem. If a native divrem_1 provides an mpn_divrem_1c entrypoint then
# common.c will want that, but the generic divrem_1 doesn't provide it,
# likewise for mod_1. The simplest way around this is to have the tune
# build versions renamed suitably.
#
# FIXME: Would like say mul_n.c to depend on $(top_builddir)/mul_n.c so the
# recompiled object will be rebuilt if that file changes.
TUNE_MPN_SRCS = $(TUNE_MPN_SRCS_BASIC) divrem_1.c mod_1.c
TUNE_MPN_SRCS_BASIC = div_qr_2.c bdiv_q.c bdiv_qr.c \
dcpi1_div_qr.c dcpi1_divappr_q.c dcpi1_bdiv_qr.c dcpi1_bdiv_q.c \
invertappr.c invert.c binvert.c divrem_2.c gcd.c gcdext.c \
get_str.c set_str.c matrix22_mul.c \
hgcd.c hgcd_appr.c hgcd_reduce.c \
mul_n.c sqr.c sec_powm.c \
mullo_n.c mul_fft.c mul.c tdiv_qr.c mulmod_bnm1.c sqrmod_bnm1.c \
mulmid.c mulmid_n.c toom42_mulmid.c sqrlo.c sqrlo_basecase.c \
nussbaumer_mul.c toom6h_mul.c toom8h_mul.c toom6_sqr.c toom8_sqr.c \
toom22_mul.c toom2_sqr.c toom33_mul.c toom3_sqr.c toom44_mul.c toom4_sqr.c
# COMPILE minus CC.
#
COMPILE_FLAGS = $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) $(ASMFLAGS)
# Flags used for preprocessing (in ansi2knr rules).
#
PREPROCESS_FLAGS = $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS)
# Recent versions of automake (1.5 and up for instance) append automake
# generated suffixes to this $(SUFFIXES) list. This is essential for us,
# since .c must come after .s, .S and .asm. If .c is before .s, for
# instance, then in the mpn directory "make" will see add_n.c mentioned in
# an explicit rule (the ansi2knr stuff) and decide it must have add_n.c,
# even if add_n.c doesn't exist but add_n.s does. See GNU make
# documentation "(make)Implicit Rule Search", part 5c.
#
# On IRIX 6 native make this doesn't work properly though. Somehow .c
# remains ahead of .s, perhaps because .c.s is a builtin rule. .asm works
# fine though, and mpn/mips3 uses this.
#
SUFFIXES = .s .S .asm
# can be overridden during development, eg. "make RM_TMP=: mul_1.lo"
RM_TMP = rm -f
all: all-am
.SUFFIXES:
.SUFFIXES: .s .S .asm .c .lo .o .obj
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/../mp
n/Makeasm.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
&& { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu --ignore-deps tune/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu --ignore-deps tune/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(srcdir)/../mpn/Makeasm.am $(am__empty):
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
libspeed.la: $(libspeed_la_OBJECTS) $(libspeed_la_DEPENDENCIES) $(EXTRA_libspeed_la_DEPENDENCIES)
$(AM_V_CCLD)$(libspeed_la_LINK) $(libspeed_la_OBJECTS) $(libspeed_la_LIBADD) $(LIBS)
speed$(EXEEXT): $(speed_OBJECTS) $(speed_DEPENDENCIES) $(EXTRA_speed_DEPENDENCIES)
@rm -f speed$(EXEEXT)
$(AM_V_CCLD)$(speed_LINK) $(speed_OBJECTS) $(speed_LDADD) $(LIBS)
speed-dynamic$(EXEEXT): $(speed_dynamic_OBJECTS) $(speed_dynamic_DEPENDENCIES) $(EXTRA_speed_dynamic_DEPENDENCIES)
@rm -f speed-dynamic$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(speed_dynamic_OBJECTS) $(speed_dynamic_LDADD) $(LIBS)
speed-ext$(EXEEXT): $(speed_ext_OBJECTS) $(speed_ext_DEPENDENCIES) $(EXTRA_speed_ext_DEPENDENCIES)
@rm -f speed-ext$(EXEEXT)
$(AM_V_CCLD)$(speed_ext_LINK) $(speed_ext_OBJECTS) $(speed_ext_LDADD) $(LIBS)
tune-gcd-p$(EXEEXT): $(tune_gcd_p_OBJECTS) $(tune_gcd_p_DEPENDENCIES) $(EXTRA_tune_gcd_p_DEPENDENCIES)
@rm -f tune-gcd-p$(EXEEXT)
$(AM_V_CCLD)$(tune_gcd_p_LINK) $(tune_gcd_p_OBJECTS) $(tune_gcd_p_LDADD) $(LIBS)
tuneup$(EXEEXT): $(tuneup_OBJECTS) $(tuneup_DEPENDENCIES) $(EXTRA_tuneup_DEPENDENCIES)
@rm -f tuneup$(EXEEXT)
$(AM_V_CCLD)$(tuneup_LINK) $(tuneup_OBJECTS) $(tuneup_LDADD) $(LIBS)
mostlyclean-compile:
-rm -f *.$(OBJEXT)
distclean-compile:
-rm -f *.tab.c
.c.o:
$(AM_V_CC)$(COMPILE) -c -o $@ $<
.c.obj:
$(AM_V_CC)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
.c.lo:
$(AM_V_CC)$(LTCOMPILE) -c -o $@ $<
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
ID: $(am__tagged_files)
$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-am
TAGS: tags
tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
$(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: ctags-am
CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
$(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
cscopelist: cscopelist-am
cscopelist-am: $(am__tagged_files)
list='$(am__tagged_files)'; \
case "$(srcdir)" in \
[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
*) sdir=$(subdir)/$(srcdir) ;; \
esac; \
for i in $$list; do \
if test -f "$$i"; then \
echo "$(subdir)/$$i"; \
else \
echo "$$sdir/$$i"; \
fi; \
done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
check-am: all-am
check: check-am
all-am: Makefile $(HEADERS)
installdirs:
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-am
clean-am: clean-generic clean-libtool mostlyclean-am
distclean: distclean-am
-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
distclean-tags
dvi: dvi-am
dvi-am:
html: html-am
html-am:
info: info-am
info-am:
install-data-am:
install-dvi: install-dvi-am
install-dvi-am:
install-exec-am:
install-html: install-html-am
install-html-am:
install-info: install-info-am
install-info-am:
install-man:
install-pdf: install-pdf-am
install-pdf-am:
install-ps: install-ps-am
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-am
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-compile mostlyclean-generic \
mostlyclean-libtool
pdf: pdf-am
pdf-am:
ps: ps-am
ps-am:
uninstall-am:
.MAKE: install-am install-strip
.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \
clean-libtool cscopelist-am ctags ctags-am distclean \
distclean-compile distclean-generic distclean-libtool \
distclean-tags distdir dvi dvi-am html html-am info info-am \
install install-am install-data install-data-am install-dvi \
install-dvi-am install-exec install-exec-am install-html \
install-html-am install-info install-info-am install-man \
install-pdf install-pdf-am install-ps install-ps-am \
install-strip installcheck installcheck-am installdirs \
maintainer-clean maintainer-clean-generic mostlyclean \
mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
pdf pdf-am ps ps-am tags tags-am uninstall uninstall-am
.PRECIOUS: Makefile
$(top_builddir)/tests/libtests.la:
cd $(top_builddir)/tests; $(MAKE) $(AM_MAKEFLAGS) libtests.la
tune:
$(MAKE) $(AM_MAKEFLAGS) tuneup$(EXEEXT)
./tuneup
allprogs: $(EXTRA_PROGRAMS)
$(TUNE_MPN_SRCS_BASIC):
for i in $(TUNE_MPN_SRCS_BASIC); do \
echo "#define TUNE_PROGRAM_BUILD 1" >$$i; \
echo "#include \"mpn/generic/$$i\"" >>$$i; \
done
divrem_1.c:
echo "#define TUNE_PROGRAM_BUILD 1" >divrem_1.c
echo "#define __gmpn_divrem_1 mpn_divrem_1_tune" >>divrem_1.c
echo "#include \"mpn/generic/divrem_1.c\"" >>divrem_1.c
mod_1.c:
echo "#define TUNE_PROGRAM_BUILD 1" >mod_1.c
echo "#define __gmpn_mod_1 mpn_mod_1_tune" >>mod_1.c
echo "#include \"mpn/generic/mod_1.c\"" >>mod_1.c
sqr_asm.asm: $(top_builddir)/mpn/sqr_basecase.asm
echo 'define(SQR_TOOM2_THRESHOLD_OVERRIDE,SQR_TOOM2_THRESHOLD_MAX)' >sqr_asm.asm
echo 'include(../mpn/sqr_basecase.asm)' >>sqr_asm.asm
# FIXME: Should it depend on $(top_builddir)/fac_ui.h too?
fac_ui.c: $(top_builddir)/mpz/fac_ui.c
echo "#define TUNE_PROGRAM_BUILD 1" >fac_ui.c
echo "#define __gmpz_fac_ui mpz_fac_ui_tune" >>fac_ui.c
echo "#define __gmpz_oddfac_1 mpz_oddfac_1_tune" >>fac_ui.c
echo "#include \"mpz/oddfac_1.c\"" >>fac_ui.c
echo "#include \"mpz/fac_ui.c\"" >>fac_ui.c
# .s assembler, no preprocessing.
#
.s.o:
$(CCAS) $(COMPILE_FLAGS) `test -f '$<' || echo '$(srcdir)/'`$<
.s.obj:
$(CCAS) $(COMPILE_FLAGS) `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi`
.s.lo:
$(LIBTOOL) --mode=compile --tag=CC $(CCAS) $(COMPILE_FLAGS) `test -f '$<' || echo '$(srcdir)/'`$<
# .S assembler, preprocessed with cpp.
#
# It's necessary to run $(CPP) separately, since it seems not all compilers
# recognise .S files, in particular "cc" on HP-UX 10 and 11 doesn't (and
# will silently do nothing if given a .S).
#
# For .lo we need a helper script, as described below for .asm.lo.
#
.S.o:
$(CPP) $(PREPROCESS_FLAGS) `test -f '$<' || echo '$(srcdir)/'`$< | grep -v '^#' >tmp-$*.s
$(CCAS) $(COMPILE_FLAGS) tmp-$*.s -o $@
$(RM_TMP) tmp-$*.s
.S.obj:
$(CPP) $(PREPROCESS_FLAGS) `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi` | grep -v '^#' >tmp-$*.s
$(CCAS) $(COMPILE_FLAGS) tmp-$*.s -o $@
$(RM_TMP) tmp-$*.s
.S.lo:
$(LIBTOOL) --mode=compile --tag=CC $(top_srcdir)/mpn/cpp-ccas --cpp="$(CPP) $(PREPROCESS_FLAGS)" $(CCAS) $(COMPILE_FLAGS) `test -f '$<' || echo '$(srcdir)/'`$<
# .asm assembler, preprocessed with m4.
#
# .o and .obj are non-PIC and just need m4 followed by a compile.
#
# .lo is a bit tricky. Libtool (as of version 1.5) has foo.lo as a little
# text file, and .libs/foo.o and foo.o as the PIC and non-PIC objects,
# respectively. It'd be asking for lots of trouble to try to create foo.lo
# ourselves, so instead arrange to invoke libtool like a --mode=compile, but
# with a special m4-ccas script which first m4 preprocesses, then compiles.
# --tag=CC is necessary since foo.asm is otherwise unknown to libtool.
#
# Libtool adds -DPIC when building a shared object and the .asm files look
# for that. But it should be noted that the other PIC flags are on occasion
# important too, in particular FreeBSD 2.2.8 gas 1.92.3 requires -k before
# it accepts PIC constructs like @GOT, and gcc adds that flag only under
# -fPIC. (Later versions of gas are happy to accept PIC stuff any time.)
#
.asm.o:
$(M4) -DOPERATION_$* `test -f '$<' || echo '$(srcdir)/'`$< >tmp-$*.s
$(CCAS) $(COMPILE_FLAGS) tmp-$*.s -o $@
$(RM_TMP) tmp-$*.s
.asm.obj:
$(M4) -DOPERATION_$* `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi` >tmp-$*.s
$(CCAS) $(COMPILE_FLAGS) tmp-$*.s -o $@
$(RM_TMP) tmp-$*.s
.asm.lo:
$(LIBTOOL) --mode=compile --tag=CC $(top_srcdir)/mpn/m4-ccas --m4="$(M4)" $(CCAS) $(COMPILE_FLAGS) `test -f '$<' || echo '$(srcdir)/'`$<
.NOTPARALLEL:
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
