Ziele Untersuchung
mit Columbo Integrität von
Datenbanken Interaktion und
Portierbarkeit Ergonomie der
Schnittstellen

Angebot Produkte Projekt Beratung

Mittel Analytik Modellierung Sprachen Algebra Logik Hardware Denken Kreativität

Zusammenhänge Gesellschaft Wirtschaft Branche Firma


products/sources/formale Sprachen/C/Firefox/gfx/2d/ (Browser von der Mozilla Stiftung Version 136.0.1^©) Datei vom 10.2.2025 mit Größe 8 kB

Quelle DrawTargetOffset.cpp Sprache: C

/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* vim: set ts=8 sts=2 et sw=2 tw=80: */
/* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/. */

#include "DrawTargetOffset.h"
#include "Logging.h"
#include "PathHelpers.h"

namespace mozilla {
namespace gfx {

DrawTargetOffset::DrawTargetOffset() = default;

bool DrawTargetOffset::Init(DrawTarget* aDrawTarget, IntPoint aOrigin) {
  mDrawTarget = aDrawTarget;
  mOrigin = aOrigin;
  mDrawTarget->SetTransform(Matrix::Translation(-mOrigin.x, -mOrigin.y));
  mFormat = mDrawTarget->GetFormat();
  SetPermitSubpixelAA(IsOpaque(mFormat));
  return true;
}

already_AddRefed<SourceSurface> DrawTargetOffset::Snapshot() {
  RefPtr<SourceSurface> snapshot = mDrawTarget->Snapshot();

  if (!snapshot) {
    return nullptr;
  }

  return MakeAndAddRef<SourceSurfaceOffset>(snapshot, mOrigin);
}

void DrawTargetOffset::DetachAllSnapshots() {}

// Skip the mClippedOut check since this is only used for Flush() which
// should happen even if we're clipped.
#define OFFSET_COMMAND(command) \
  void DrawTargetOffset::command() { mDrawTarget->command(); }
#define OFFSET_COMMAND1(command, type1) \
  void DrawTargetOffset::command(type1 arg1) { mDrawTarget->command(arg1); }
#define OFFSET_COMMAND3(command, type1, type2, type3)                  \
  void DrawTargetOffset::command(type1 arg1, type2 arg2, type3 arg3) { \
    mDrawTarget->command(arg1, arg2, arg3);                            \
  }
#define OFFSET_COMMAND4(command, type1, type2, type3, type4)         \
  void DrawTargetOffset::command(type1 arg1, type2 arg2, type3 arg3, \
                                 type4 arg4) {                       \
    mDrawTarget->command(arg1, arg2, arg3, arg4);                    \
  }
#define OFFSET_COMMAND5(command, type1, type2, type3, type4, type5)  \
  void DrawTargetOffset::command(type1 arg1, type2 arg2, type3 arg3, \
                                 type4 arg4, type5 arg5) {           \
    mDrawTarget->command(arg1, arg2, arg3, arg4, arg5);              \
  }

OFFSET_COMMAND(Flush)
OFFSET_COMMAND1(ClearRect, const Rect&)
OFFSET_COMMAND4(MaskSurface, const Pattern&, SourceSurface*, Point,
                const DrawOptions&)
OFFSET_COMMAND4(FillGlyphs, ScaledFont*, const GlyphBuffer&, const Pattern&,
                const DrawOptions&)
OFFSET_COMMAND5(StrokeGlyphs, ScaledFont*, const GlyphBuffer&, const Pattern&,
                const StrokeOptions&, const DrawOptions&)
OFFSET_COMMAND3(FillRoundedRect, const RoundedRect&, const Pattern&,
                const DrawOptions&)

bool DrawTargetOffset::Draw3DTransformedSurface(SourceSurface* aSrc,
                                                const Matrix4x4& aMatrix) {
  return mDrawTarget->Draw3DTransformedSurface(aSrc, aMatrix);
}

OFFSET_COMMAND3(Mask, const Pattern&, const Pattern&, const DrawOptions&)

void DrawTargetOffset::DrawFilter(FilterNode* aNode, const Rect& aSourceRect,
                                  const Point& aDestPoint,
                                  const DrawOptions& aOptions) {
  auto clone = mTransform;
  bool invertible = clone.Invert();
  // aSourceRect is in filter space. The filter outputs from aSourceRect need
  // to be drawn at aDestPoint in user space.
  Rect userSpaceSource = Rect(aDestPoint, aSourceRect.Size());
  if (invertible) {
    // Try to reduce the source rect so that it's not much bigger
    // than the draw target. The result is not minimal. Examples
    // are left as an exercise for the reader.
    auto destRect = Rect(mDrawTarget->GetRect() + mOrigin);
    Rect userSpaceBounds = clone.TransformBounds(destRect);
    userSpaceSource = userSpaceSource.Intersect(userSpaceBounds);
  }

  // Compute how much we moved the top-left of the source rect by, and use that
  // to compute the new dest point, and move our intersected source rect back
  // into the (new) filter space.
  Point shift = userSpaceSource.TopLeft() - aDestPoint;
  Rect filterSpaceSource =
      Rect(aSourceRect.TopLeft() + shift, userSpaceSource.Size());
  mDrawTarget->DrawFilter(aNode, filterSpaceSource, aDestPoint + shift,
                          aOptions);
}

void DrawTargetOffset::PushClip(const Path* aPath) {
  mDrawTarget->PushClip(aPath);
}

void DrawTargetOffset::PushClipRect(const Rect& aRect) {
  mDrawTarget->PushClipRect(aRect);
}

void DrawTargetOffset::PopClip() { mDrawTarget->PopClip(); }

void DrawTargetOffset::CopySurface(SourceSurface* aSurface,
                                   const IntRect& aSourceRect,
                                   const IntPoint& aDestination) {
  IntPoint tileOrigin = mOrigin;
  // CopySurface ignores the transform, account for that here.
  mDrawTarget->CopySurface(aSurface, aSourceRect, aDestination - tileOrigin);
}

void DrawTargetOffset::SetTransform(const Matrix& aTransform) {
  Matrix mat = aTransform;
  mat.PostTranslate(Float(-mOrigin.x), Float(-mOrigin.y));
  mDrawTarget->SetTransform(mat);

  DrawTarget::SetTransform(aTransform);
}

void DrawTargetOffset::SetPermitSubpixelAA(bool aPermitSubpixelAA) {
  mDrawTarget->SetPermitSubpixelAA(aPermitSubpixelAA);
}

void DrawTargetOffset::DrawSurface(SourceSurface* aSurface, const Rect& aDest,
                                   const Rect& aSource,
                                   const DrawSurfaceOptions& aSurfaceOptions,
                                   const DrawOptions& aDrawOptions) {
  mDrawTarget->DrawSurface(aSurface, aDest, aSource, aSurfaceOptions,
                           aDrawOptions);
}

void DrawTargetOffset::FillRect(const Rect& aRect, const Pattern& aPattern,
                                const DrawOptions& aDrawOptions) {
  mDrawTarget->FillRect(aRect, aPattern, aDrawOptions);
}

void DrawTargetOffset::Stroke(const Path* aPath, const Pattern& aPattern,
                              const StrokeOptions& aStrokeOptions,
                              const DrawOptions& aDrawOptions) {
  mDrawTarget->Stroke(aPath, aPattern, aStrokeOptions, aDrawOptions);
}

void DrawTargetOffset::StrokeRect(const Rect& aRect, const Pattern& aPattern,
                                  const StrokeOptions& aStrokeOptions,
                                  const DrawOptions& aDrawOptions) {
  mDrawTarget->StrokeRect(aRect, aPattern, aStrokeOptions, aDrawOptions);
}

void DrawTargetOffset::StrokeLine(const Point& aStart, const Point& aEnd,
                                  const Pattern& aPattern,
                                  const StrokeOptions& aStrokeOptions,
                                  const DrawOptions& aDrawOptions) {
  mDrawTarget->StrokeLine(aStart, aEnd, aPattern, aStrokeOptions, aDrawOptions);
}

void DrawTargetOffset::Fill(const Path* aPath, const Pattern& aPattern,
                            const DrawOptions& aDrawOptions) {
  mDrawTarget->Fill(aPath, aPattern, aDrawOptions);
}

void DrawTargetOffset::PushLayer(bool aOpaque, Float aOpacity,
                                 SourceSurface* aMask,
                                 const Matrix& aMaskTransform,
                                 const IntRect& aBounds, bool aCopyBackground) {
  IntRect bounds = aBounds - mOrigin;

  mDrawTarget->PushLayer(aOpaque, aOpacity, aMask, aMaskTransform, bounds,
                         aCopyBackground);
  SetPermitSubpixelAA(mDrawTarget->GetPermitSubpixelAA());
}

already_AddRefed<SourceSurface> DrawTargetOffset::IntoLuminanceSource(
    LuminanceType aLuminanceType, float aOpacity) {
  RefPtr<SourceSurface> surface =
      mDrawTarget->IntoLuminanceSource(aLuminanceType, aOpacity);

  if (!surface) {
    return nullptr;
  }

  return MakeAndAddRef<SourceSurfaceOffset>(surface, mOrigin);
}

void DrawTargetOffset::PushLayerWithBlend(bool aOpaque, Float aOpacity,
                                          SourceSurface* aMask,
                                          const Matrix& aMaskTransform,
                                          const IntRect& aBounds,
                                          bool aCopyBackground,
                                          CompositionOp aOp) {
  IntRect bounds = aBounds - mOrigin;

  mDrawTarget->PushLayerWithBlend(aOpaque, aOpacity, aMask, aMaskTransform,
                                  bounds, aCopyBackground, aOp);
  SetPermitSubpixelAA(mDrawTarget->GetPermitSubpixelAA());
}

void DrawTargetOffset::PopLayer() {
  mDrawTarget->PopLayer();
  SetPermitSubpixelAA(mDrawTarget->GetPermitSubpixelAA());
}

RefPtr<DrawTarget> DrawTargetOffset::CreateClippedDrawTarget(
    const Rect& aBounds, SurfaceFormat aFormat) {
  RefPtr<DrawTarget> result;
  RefPtr<DrawTarget> dt =
      mDrawTarget->CreateClippedDrawTarget(aBounds, aFormat);
  if (dt) {
    result = gfx::Factory::CreateOffsetDrawTarget(dt, mOrigin);
    if (result) {
      result->SetTransform(mTransform);
    }
  }
  return result;
}

}  // namespace gfx
}  // namespace mozilla

quality100%

¤ Dauer der Verarbeitung: 0.14 Sekunden (vorverarbeitet) ¤

Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.