## Makefile.in for ICU data
## Copyright (C) 2016 and later: Unicode, Inc. and others.
## License & terms of use:
http://www.unicode.org/copyright.html
## Copyright (c) 1999-2015, International Business Machines Corporation and
## others. All Rights Reserved.
## Source directory information
srcdir = @srcdir@
top_srcdir = @top_srcdir@
# So that you have $(top_builddir)/config.status
top_builddir = ..
## All the flags and other definitions are included here.
include $(top_builddir)/icudefs.mk
## Build directory information
# So that $(top_builddir)/$(subdir) ~= "here"
subdir = data
#lib icu data for link
LIB_ICUDATA_NAME=$(LIBICU)$(DATA_STUBNAME)$(ICULIBSUFFIX)
LIB_STATIC_ICUDATA_NAME=$(LIBSICU)$(DATA_STUBNAME)$(ICULIBSUFFIX)
# Allow Windows to override these options
ifeq ($(PKGDATA_OPTS),)
PKGDATA_OPTS = -O $(top_builddir)/data/icupkg.inc
endif
ifeq ($(PKGDATA_VERSIONING),)
PKGDATA_VERSIONING = -r $(SO_TARGET_VERSION)
endif
# This allows all the data to be in one directory
ifeq ($(PKGDATA_MODE),dll)
ICUPKGDATA_OUTDIR = $(LIBDIR)
else
ifeq ($(PKGDATA_MODE),static)
ICUPKGDATA_OUTDIR = $(LIBDIR)
else
ICUPKGDATA_OUTDIR = $(OUTDIR)
endif
endif
CURDIR:=$(CURR_FULL_DIR)
# current directory should not be blank
ifeq ($(CURDIR),)
CURDIR=.
endif
ifeq ($(BUILD_HOST_ICU),OS390)
PKGDATA = $(TOOLBINDIR)/pkgdata $(PKGDATA_OPTS) -z -q -c -s $(CURDIR)/out/build/$(ICUDAT
A_PLATFORM_NAME) -d $(ICUPKGDATA_OUTDIR)
else
PKGDATA = $(TOOLBINDIR)/pkgdata $(PKGDATA_OPTS) -q -c -s $(CURDIR)/out/build/$(ICUDATA_PLATFORM_NAME) -d $(ICUPKGDATA_OUTDIR)
endif
# OBJDATADIR must be a short path (with ..'s) to the data.
ifeq ($(top_srcdir),..)
SRCDATADIR=.
else
SRCDATADIR=$(top_srcdir)/data
endif
ifeq ($(top_builddir),..)
OUTDIR=./out
else
OUTDIR=$(top_builddir)/data/out
endif
OUTTMPDIR=$(OUTDIR)/tmp
MAINBUILDDIR=$(OUTDIR)/build
BUILDDIR=$(MAINBUILDDIR)/$(ICUDATA_PLATFORM_NAME)
MISCSRCDIR=$(SRCDATADIR)/misc
SRCLISTDEPS=Makefile $(srcdir)/Makefile.in
# Variable names for rules.mk
OUT_DIR=$(BUILDDIR)
TMP_DIR=$(OUTTMPDIR)
# relative lib links from pkgdata are the same as for tmp
TOOLDIR=$(top_builddir)/tools
## List of phony targets
.PHONY : all all-local all-recursive install install-local install-files \
install-recursive clean clean-local clean-recursive distclean \
distclean-local distclean-recursive dist dist-local dist-recursive \
check check-local check-recursive clean-resindex icudata.jar \
check-exhaustive
## Clear suffix list
.SUFFIXES :
## List of standard targets
all: all-local
install: all-local install-local
clean: clean-local
distclean : distclean-local
dist:
check: all check-local
check-exhaustive: check
-include Makefile.local
distclean-local: clean
$(RMV) Makefile
all-local: icupkg.inc build-local packagedata $(POST_DATA_BUILD)
dist-local:
clean-map:
-test -z *.map || $(RMV) *.map
clean-local: cleanpackage cleanfiles clean-map
$(RMV) $(OUTDIR) build-local packagedata uni-core-data
cleanfiles:
test -z "$(CLEANFILES)" || $(RMV) $(CLEANFILES)
cleanpackage:
$(RMV) $(OUTDIR)
$(RMV) $(LIBDIR)/*$(LIB_ICUDATA_NAME)*.$(SO)* $(LIBDIR)/$(LIB_STATIC_ICUDATA_NAME).$(A)
check-local:
PYTHONPATH=$(top_srcdir)/python @PYTHON@ -m icutools.databuilder.test
# Find out if we have a source archive.
# If we have that, then use that instead of building everything from scratch.
ICUDATA_SOURCE_ARCHIVE = $(wildcard $(srcdir)/in/$(ICUDATA_PLATFORM_NAME).dat)
ifeq ($(ICUDATA_SOURCE_ARCHIVE),)
ICUDATA_ARCHIVE = $(firstword $(wildcard $(srcdir)/in/$(ICUDATA_BASENAME_VERSION)*.dat))
# We don't have the data in the current endianness or charset.
# See if we can find data of any archive type,
# and convert it to the current type.
ifneq ($(ICUDATA_ARCHIVE),)
ICUDATA_SOURCE_ARCHIVE = $(OUTDIR)/$(ICUDATA_PLATFORM_NAME).dat
$(ICUDATA_SOURCE_ARCHIVE): $(ICUDATA_ARCHIVE)
$(MKINSTALLDIRS) $(OUTDIR)
$(INVOKE) $(TOOLBINDIR)/icupkg -t$(ICUDATA_CHAR) $(ICUDATA_ARCHIVE) $(ICUDATA_SOURCE_ARCHIVE)
$(OUTDIR):
mkdir -p $(OUTDIR)
endif
else
ifneq ($(ENABLE_STATIC),YES)
ifeq ($(PKGDATA_MODE),common)
# We have a source data common archive in the native endianness,
# and it's what we want to build. Try to not run any of ICU's tools.
ICUDATA_SOURCE_IS_NATIVE_TARGET=YES
endif
endif
endif
packagedata: icupkg.inc $(PKGDATA_LIST) build-local
ifneq ($(ENABLE_STATIC),)
ifeq ($(PKGDATA_MODE),dll)
$(PKGDATA_INVOKE) $(PKGDATA) -e $(ICUDATA_ENTRY_POINT) -T $(OUTTMPDIR) -p $(ICUDATA_NAME) $(PKGDATA_LIBSTATICNAME) -m static $(PKGDATA_VERSIONING) $(PKGDATA_LIST)
endif
endif
ifneq ($(ICUDATA_SOURCE_IS_NATIVE_TARGET),YES)
$(PKGDATA_INVOKE) $(PKGDATA) -e $(ICUDATA_ENTRY_POINT) -T $(OUTTMPDIR) -p $(ICUDATA_NAME) -m $(PKGDATA_MODE) $(PKGDATA_VERSIONING) $(PKGDATA_LIBNAME) $(PKGDATA_LIST)
else
$(INSTALL_DATA) $(ICUDATA_SOURCE_ARCHIVE) $(OUTDIR)
endif
echo timestamp > $@
## Install ICU data.
install-local: $(PKGDATA_LIST) ./icupkg.inc packagedata
$(MKINSTALLDIRS) $(TMPDATADIR) $(DESTDIR)$(ICUPKGDATA_DIR)
ifeq ($(PKGDATA_MODE),files)
$(MKINSTALLDIRS) $(ICUPKGDATA_DIR)/$(ICUDATA_NAME)
$(MKINSTALLDIRS) $(ICUPKGDATA_DIR)/$(ICUDATA_NAME)/$(CURR_TREE)
$(MKINSTALLDIRS) $(ICUPKGDATA_DIR)/$(ICUDATA_NAME)/$(LANG_TREE)
$(MKINSTALLDIRS) $(ICUPKGDATA_DIR)/$(ICUDATA_NAME)/$(REGION_TREE)
$(MKINSTALLDIRS) $(ICUPKGDATA_DIR)/$(ICUDATA_NAME)/$(ZONE_TREE)
$(MKINSTALLDIRS) $(ICUPKGDATA_DIR)/$(ICUDATA_NAME)/$(UNIT_TREE)
$(MKINSTALLDIRS) $(ICUPKGDATA_DIR)/$(ICUDATA_NAME)/$(BREAK_TREE)
$(MKINSTALLDIRS) $(ICUPKGDATA_DIR)/$(ICUDATA_NAME)/$(COLLATION_TREE)
$(MKINSTALLDIRS) $(ICUPKGDATA_DIR)/$(ICUDATA_NAME)/$(RBNF_TREE)
$(MKINSTALLDIRS) $(ICUPKGDATA_DIR)/$(ICUDATA_NAME)/$(TRANSLIT_TREE)
endif
ifneq ($(ENABLE_STATIC),)
ifeq ($(PKGDATA_MODE),dll)
# For MinGW, do we want the DLL to go in the bin location?
ifeq ($(MINGW_MOVEDLLSTOBINDIR),YES)
$(PKGDATA_INVOKE) $(PKGDATA) -m static -e $(ICUDATA_ENTRY_POINT) -T $(OUTTMPDIR) -s $(BUILDDIR) -p $(ICUDATA_NAME) $(PKGDATA_LIBSTATICNAME) $(PKGDATA_LIST) -I $(DESTDIR)$(bindir)
else
$(PKGDATA_INVOKE) $(PKGDATA) -m static -e $(ICUDATA_ENTRY_POINT) -T $(OUTTMPDIR) -s $(BUILDDIR) -p $(ICUDATA_NAME) $(PKGDATA_LIBSTATICNAME) $(PKGDATA_LIST) -I $(ICUPKGDATA_INSTALL_LIBDIR)
endif
endif
endif
ifneq ($(ICUDATA_SOURCE_IS_NATIVE_TARGET),YES)
# For MinGW, do we want the DLL to go in the bin location?
ifeq ($(MINGW_MOVEDLLSTOBINDIR),YES)
$(PKGDATA_INVOKE) $(PKGDATA) -m $(PKGDATA_MODE) $(PKGDATA_VERSIONING) -e $(ICUDATA_ENTRY_POINT) -T $(OUTTMPDIR) -s $(BUILDDIR) -p $(ICUDATA_NAME) $(PKGDATA_LIBNAME) $(PKGDATA_LIST) -I $(DESTDIR)$(bindir)
else
$(PKGDATA_INVOKE) $(PKGDATA) -m $(PKGDATA_MODE) $(PKGDATA_VERSIONING) -e $(ICUDATA_ENTRY_POINT) -T $(OUTTMPDIR) -s $(BUILDDIR) -p $(ICUDATA_NAME) $(PKGDATA_LIBNAME) $(PKGDATA_LIST) -I $(ICUPKGDATA_INSTALL_DIR)
endif
else
$(INSTALL_DATA) $(ICUDATA_SOURCE_ARCHIVE) $(DESTDIR)$(ICUPKGDATA_DIR)
endif
## Include the main build rules for data files
include $(top_builddir)/$(subdir)/rules.mk
ifeq ($(ENABLE_SO_VERSION_DATA),1)
ifeq ($(PKGDATA_MODE),dll)
SO_VERSION_DATA = $(OUTTMPDIR)/icudata.res
$(SO_VERSION_DATA) : $(MISCSRCDIR)/icudata.rc | $(TMP_DIR)/dirs.timestamp
ifeq ($(MSYS_RC_MODE),1)
rc.exe -i$(srcdir)/../common -i$(top_builddir)/common -fo$@ $(CPPFLAGS) $<
else
rc.exe /i$(srcdir)/../common /i$(top_builddir)/common /fo$@ $(CPPFLAGS) $(SOURCE_FILE)
endif
endif
endif
PKGDATA_LIST = $(TMP_DIR)/icudata.lst
#####################################################
# General data build rules
## Files to remove for 'make clean'
CLEANFILES = *~ icupkg.inc *.x
ifeq ($(ICUDATA_SOURCE_ARCHIVE),)
build-local: $(SO_VERSION_DATA) $(ICUDATA_ALL_OUTPUT_FILES) $(PKGDATA_LIST)
echo timestamp > $@
else
build-local: $(SO_VERSION_DATA) $(PKGDATA_LIST)
echo timestamp > $@
$(PKGDATA_LIST): $(SRCLISTDEPS) $(ICUDATA_SOURCE_ARCHIVE)
ifneq ($(ICUDATA_SOURCE_IS_NATIVE_TARGET),YES)
$(MKINSTALLDIRS) $(OUTTMPDIR) $(BUILDDIR)
@echo "Unpacking $(ICUDATA_SOURCE_ARCHIVE) and generating $@ (list of data files)"
@-$(RMV) $@
$(INVOKE) $(TOOLBINDIR)/icupkg -d $(BUILDDIR) --list -x \* $(ICUDATA_SOURCE_ARCHIVE) -o $@
else
@echo "$@" > $@
endif
endif
# if the tzcode directory contains a new tzdata*.tar.gz file, use it for zoneinfo
ifeq ($(TZDATA),)
TZDATA = $(firstword $(wildcard $(top_builddir)/tools/tzcode/tzdata*.tar.gz) $(wildcard $(top_srcdir)/tools/tzcode/tzdata*.tar.gz))
endif
# TODO(ICU-20466): Make the TZDATA override part of Python icutools.databuilder
ifneq ($(TZDATA),)
TZCODE_DIR=$(top_builddir)/tools/tzcode
ZONEINFO=$(TZCODE_DIR)/zoneinfo64.txt
# Override the normal genrb for zoneinfo to always pull from
# icu/source/tools/tzcode/zoneinfo64.txt
$(BUILDDIR)/zoneinfo64.res: $(ZONEINFO) $(TOOLBINDIR)/genrb$(TOOLEXEEXT) | $(BUILDDIR)/cnvalias.icu
@echo Note: $(MISCSRCDIR)/zoneinfo.txt is IGNORED because $(TZDATA) is present.
$(INVOKE) $(TOOLBINDIR)/genrb $(GENRBOPTS) -q -i $(BUILDDIR) -d $(BUILDDIR) $(ZONEINFO)
# Create the tzcode tool and zoneinfo as needed.
$(ZONEINFO): $(TZDATA)
@echo "$(MAKE)[$(MAKELEVEL)]: Making \`$(ZONEINFO)' in \`$(TZCODE_DIR)'"; \
(cd $(TZCODE_DIR) && $(MAKE)) || exit; \
# end of zoneinfo-generation
endif
# Build the ICU4J icudata.jar.
# Command line:
# (Run this from the output data folder which may not be .../source/data in an out-of-source build.)
# ~/svn.icu/trunk/source/data> make JAR=jar ICU4J_ROOT=~/svn.icu4j/trunk icudata.jar
# You can omit the ICU4J_ROOT for just building the .jar files without copying them.
# You can omit the JAR if it's just jar.
JAR=jar
# For building the testdata.jar see ../test/testdata/Makefile.
ICU4J_TZDATA=$(OUTDIR)/icu4j/icutzdata.jar
ICU4J_TZDATA_FILES=zoneinfo64 metaZones timezoneTypes windowsZones
ICU4J_DATA_DIRNAME=com/ibm/icu/impl/data/icudata
ICU4J_TZDATA_PATHS=$(ICU4J_TZDATA_FILES:%="$(ICU4J_DATA_DIRNAME)/%.res")
# generate icu4j-related data to $(OUTDIR)/icu4j/com/ibm/icu/impl/data/...
generate-data: packagedata $(OUTTMPDIR)/$(ICUDATA_PLATFORM_NAME).dat
mkdir -p $(OUTDIR)/icu4j/$(ICU4J_DATA_DIRNAME)
mkdir -p $(OUTDIR)/icu4j/tzdata/$(ICU4J_DATA_DIRNAME)
$(INVOKE) $(TOOLBINDIR)/icupkg $(OUTTMPDIR)/$(ICUDATA_PLATFORM_NAME).dat $(OUTDIR)/icu4j/$(ICUDATA_BASENAME_VERSION)b.dat -s $(BUILDDIR) -x '*' -tb -d $(OUTDIR)/icu4j/$(ICU4J_DATA_DIRNAME)
mv $(ICU4J_TZDATA_PATHS:%=$(OUTDIR)/icu4j/%) "$(OUTDIR)/icu4j/tzdata/$(ICU4J_DATA_DIRNAME)"
$(OUTDIR)/icu4j/icutzdata.jar: generate-data
$(JAR) cf $(OUTDIR)/icu4j/icutzdata.jar -C $(OUTDIR)/icu4j/tzdata $(ICU4J_DATA_DIRNAME)/
# Build icudata.jar:
# - add the uni-core-data to the ICU package
# - swap the ICU data
# - extract all data items
# - package them into the .jar file
# TODO(ICU-20466): Move this to Python
# NOTE: If you get the error "No rule to make target 'out/build/icudt64l/uprops.icu'",
# you need to reconfigure with unicore data. See icu4j-readme.txt
$(OUTDIR)/icu4j/icudata.jar: generate-data | $(OUT_DIR)/uprops.icu
$(JAR) cf $(OUTDIR)/icu4j/icudata.jar -C $(OUTDIR)/icu4j $(ICU4J_DATA_DIRNAME)/
ICU4J_DATA=$(OUTDIR)/icu4j/icudata.jar
ifdef ICU4J_ROOT
ICU4J_DATA_INSTALLED=$(ICU4J_ROOT)/main/shared/data/icudata.jar $(ICU4J_ROOT)/main/shared/data/icutzdata.jar
$(ICU4J_ROOT)/main/shared/data/icudata.jar: $(OUTDIR)/icu4j/icudata.jar
mkdir -p $(ICU4J_ROOT)/main/shared/data
cp $(OUTDIR)/icu4j/icudata.jar $(ICU4J_ROOT)/main/shared/data
$(ICU4J_ROOT)/main/shared/data/icutzdata.jar: $(OUTDIR)/icu4j/icutzdata.jar
mkdir -p $(ICU4J_ROOT)/main/shared/data
cp $(OUTDIR)/icu4j/icutzdata.jar $(ICU4J_ROOT)/main/shared/data
icu4j-data-install: $(ICU4J_DATA_INSTALLED)
else
icu4j-data-install: icu4j-data
@echo data is built into $(OUTDIR)/icu4j
@echo '** Error:' ICU4J_ROOT was not set, could not install
exit 1
endif
icu4j-data: $(ICU4J_DATA) $(ICU4J_TZDATA)
###################################################################
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
cd $(top_builddir) \
&& CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
icupkg.inc: pkgdataMakefile
$(MAKE) -f pkgdataMakefile
pkgdataMakefile:
cd $(top_builddir) \
&& CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
###########
########### 390 (z/OS) support
UCMFILES390=ebcdic-xml-us.ucm ibm-37_P100-1995.ucm ibm-1047_P100-1995.ucm ibm-4909_P100-1999.ucm
# used to depend on pnames.icu uprops.icu ucase.icu ubidi.icu
# These are now hardcoded in ICU4C and only loaded in ICU4J.
ALLFILES390=cnvalias.icu $(UCMFILES390:.ucm=.cnv)
$(OUTTMPDIR)/icudata390.lst: $(SRCLISTDEPS)
@echo "generating $@ (list of 390 data files)"
@-$(RMV) $@
@for file in $(ALLFILES390); do \
echo $$file >> $@; \
done;
ifeq ($(POST_DATA_BUILD), os400-data-rebind)
os400-data-rebind: $(LIBICUUC)
$(LIBICUUC): $(LIBICUDT)
$(RMV) $(LIBICUUC)
(cd ../common && $(MAKE) RECURSIVE=YES) || exit;
endif
