Ziele Untersuchung
mit Columbo Integrität von
Datenbanken Interaktion und
Portierbarkeit Ergonomie der
Schnittstellen

Angebot Produkte Projekt Beratung

Mittel Analytik Modellierung Sprachen Algebra Logik Hardware Denken Kreativität

Zusammenhänge Gesellschaft Wirtschaft Branche Firma


products/sources/formale Sprachen/C/Firefox/layout/mathml/ (Browser von der Mozilla Stiftung Version 136.0.1^©) Datei vom 10.2.2025 mit Größe 15 kB

Quelle nsMathMLmfracFrame.cpp Sprache: C

/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* vim: set ts=8 sts=2 et sw=2 tw=80: */
/* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/. */

#include "nsMathMLmfracFrame.h"

#include "gfxUtils.h"
#include "mozilla/gfx/2D.h"
#include "mozilla/PresShell.h"
#include "mozilla/RefPtr.h"
#include "mozilla/StaticPrefs_mathml.h"
#include "nsLayoutUtils.h"
#include "nsPresContext.h"
#include "nsDisplayList.h"
#include "gfxContext.h"
#include "mozilla/dom/Document.h"
#include "mozilla/dom/MathMLElement.h"
#include <algorithm>
#include "gfxMathTable.h"
#include "gfxTextRun.h"

using namespace mozilla;
using namespace mozilla::gfx;

//
// <mfrac> -- form a fraction from two subexpressions - implementation
//

nsIFrame* NS_NewMathMLmfracFrame(PresShell* aPresShell, ComputedStyle* aStyle) {
  return new (aPresShell)
      nsMathMLmfracFrame(aStyle, aPresShell->GetPresContext());
}

NS_IMPL_FRAMEARENA_HELPERS(nsMathMLmfracFrame)

nsMathMLmfracFrame::~nsMathMLmfracFrame() = default;

eMathMLFrameType nsMathMLmfracFrame::GetMathMLFrameType() {
  // frac is "inner" in TeXBook, Appendix G, rule 15e. See also page 170.
  return eMathMLFrameType_Inner;
}

uint8_t nsMathMLmfracFrame::ScriptIncrement(nsIFrame* aFrame) {
  if (StyleFont()->mMathStyle == StyleMathStyle::Compact && aFrame &&
      (mFrames.FirstChild() == aFrame || mFrames.LastChild() == aFrame)) {
    return 1;
  }
  return 0;
}

NS_IMETHODIMP
nsMathMLmfracFrame::TransmitAutomaticData() {
  // The TeXbook (Ch 17. p.141) says the numerator inherits the compression
  //  while the denominator is compressed
  UpdatePresentationDataFromChildAt(1, 1, NS_MATHML_COMPRESSED,
                                    NS_MATHML_COMPRESSED);

  // If displaystyle is false, then scriptlevel is incremented, so notify the
  // children of this.
  if (StyleFont()->mMathStyle == StyleMathStyle::Compact) {
    PropagateFrameFlagFor(mFrames.FirstChild(),
                          NS_FRAME_MATHML_SCRIPT_DESCENDANT);
    PropagateFrameFlagFor(mFrames.LastChild(),
                          NS_FRAME_MATHML_SCRIPT_DESCENDANT);
  }

  // if our numerator is an embellished operator, let its state bubble to us
  GetEmbellishDataFrom(mFrames.FirstChild(), mEmbellishData);
  if (NS_MATHML_IS_EMBELLISH_OPERATOR(mEmbellishData.flags)) {
    // even when embellished, we need to record that <mfrac> won't fire
    // Stretch() on its embellished child
    mEmbellishData.direction = NS_STRETCH_DIRECTION_UNSUPPORTED;
  }

  return NS_OK;
}

nscoord nsMathMLmfracFrame::CalcLineThickness(nsPresContext* aPresContext,
                                              ComputedStyle* aComputedStyle,
                                              nsString& aThicknessAttribute,
                                              nscoord onePixel,
                                              nscoord aDefaultRuleThickness,
                                              float aFontSizeInflation) {
  nscoord defaultThickness = aDefaultRuleThickness;
  nscoord lineThickness = aDefaultRuleThickness;
  nscoord minimumThickness = onePixel;

  // linethickness
  // https://w3c.github.io/mathml-core/#dfn-linethickness
  if (!aThicknessAttribute.IsEmpty()) {
    lineThickness = defaultThickness;
    ParseNumericValue(aThicknessAttribute, &lineThickness,
                      dom::MathMLElement::PARSE_ALLOW_NEGATIVE, aPresContext,
                      aComputedStyle, aFontSizeInflation);
    // MathML Core says a negative value is interpreted as 0.
    if (lineThickness < 0) {
      lineThickness = 0;
    }
  }
  // use minimum if the lineThickness is a non-zero value less than minimun
  if (lineThickness && lineThickness < minimumThickness) {
    lineThickness = minimumThickness;
  }

  return lineThickness;
}

void nsMathMLmfracFrame::BuildDisplayList(nsDisplayListBuilder* aBuilder,
                                          const nsDisplayListSet& aLists) {
  /////////////
  // paint the numerator and denominator
  nsMathMLContainerFrame::BuildDisplayList(aBuilder, aLists);

  /////////////
  // paint the fraction line
  DisplayBar(aBuilder, this, mLineRect, aLists);
}

nsresult nsMathMLmfracFrame::AttributeChanged(int32_t aNameSpaceID,
                                              nsAtom* aAttribute,
                                              int32_t aModType) {
  if (aNameSpaceID == kNameSpaceID_None &&
      nsGkAtoms::linethickness_ == aAttribute) {
    // The thickness changes, so a repaint of the bar is needed.
    InvalidateFrame();
    // The thickness affects vertical offsets.
    PresShell()->FrameNeedsReflow(this, IntrinsicDirty::None,
                                  NS_FRAME_IS_DIRTY);
    return NS_OK;
  }
  return nsMathMLContainerFrame::AttributeChanged(aNameSpaceID, aAttribute,
                                                  aModType);
}

nscoord nsMathMLmfracFrame::FixInterFrameSpacing(ReflowOutput& aDesiredSize) {
  nscoord gap = nsMathMLContainerFrame::FixInterFrameSpacing(aDesiredSize);
  if (!gap) {
    return 0;
  }

  mLineRect.MoveBy(gap, 0);
  return gap;
}

/* virtual */
nsresult nsMathMLmfracFrame::Place(DrawTarget* aDrawTarget,
                                   const PlaceFlags& aFlags,
                                   ReflowOutput& aDesiredSize) {
  ////////////////////////////////////
  // Get the children's desired sizes
  nsBoundingMetrics bmNum, bmDen;
  ReflowOutput sizeNum(aDesiredSize.GetWritingMode());
  ReflowOutput sizeDen(aDesiredSize.GetWritingMode());
  nsIFrame* frameDen = nullptr;
  nsIFrame* frameNum = mFrames.FirstChild();
  if (frameNum) {
    frameDen = frameNum->GetNextSibling();
  }
  if (!frameNum || !frameDen || frameDen->GetNextSibling()) {
    // report an error, encourage people to get their markups in order
    if (!aFlags.contains(PlaceFlag::MeasureOnly)) {
      ReportChildCountError();
    }
    return PlaceAsMrow(aDrawTarget, aFlags, aDesiredSize);
  }
  GetReflowAndBoundingMetricsFor(frameNum, sizeNum, bmNum);
  GetReflowAndBoundingMetricsFor(frameDen, sizeDen, bmDen);

  nsMargin numMargin = GetMarginForPlace(aFlags, frameNum),
           denMargin = GetMarginForPlace(aFlags, frameDen);

  nsPresContext* presContext = PresContext();
  nscoord onePixel = nsPresContext::CSSPixelsToAppUnits(1);

  float fontSizeInflation = nsLayoutUtils::FontSizeInflationFor(this);
  RefPtr<nsFontMetrics> fm =
      nsLayoutUtils::GetFontMetricsForFrame(this, fontSizeInflation);

  nscoord defaultRuleThickness, axisHeight;
  nscoord oneDevPixel = fm->AppUnitsPerDevPixel();
  RefPtr<gfxFont> mathFont = fm->GetThebesFontGroup()->GetFirstMathFont();
  if (mathFont) {
    defaultRuleThickness = mathFont->MathTable()->Constant(
        gfxMathTable::FractionRuleThickness, oneDevPixel);
  } else {
    GetRuleThickness(aDrawTarget, fm, defaultRuleThickness);
  }
  GetAxisHeight(aDrawTarget, fm, axisHeight);

  bool outermostEmbellished = false;
  if (mEmbellishData.coreFrame) {
    nsEmbellishData parentData;
    GetEmbellishDataFrom(GetParent(), parentData);
    outermostEmbellished = parentData.coreFrame != mEmbellishData.coreFrame;
  }

  // see if the linethickness attribute is there
  nsAutoString value;
  mContent->AsElement()->GetAttr(nsGkAtoms::linethickness_, value);
  mLineThickness =
      CalcLineThickness(presContext, mComputedStyle, value, onePixel,
                        defaultRuleThickness, fontSizeInflation);

  bool displayStyle = StyleFont()->mMathStyle == StyleMathStyle::Normal;

  mLineRect.height = mLineThickness;

  // Add lspace & rspace that may come from <mo> if we are an outermost
  // embellished container (we fetch values from the core since they may use
  // units that depend on style data, and style changes could have occurred
  // in the core since our last visit there)
  nscoord leftSpace = 0;
  nscoord rightSpace = 0;
  if (outermostEmbellished) {
    const bool isRTL = StyleVisibility()->mDirection == StyleDirection::Rtl;
    nsEmbellishData coreData;
    GetEmbellishDataFrom(mEmbellishData.coreFrame, coreData);
    leftSpace += isRTL ? coreData.trailingSpace : coreData.leadingSpace;
    rightSpace += isRTL ? coreData.leadingSpace : coreData.trailingSpace;
  }

  nscoord actualRuleThickness = mLineThickness;

  //////////////////
  // Get shifts
  nscoord numShift = 0;
  nscoord denShift = 0;

  // Rule 15b, App. G, TeXbook
  nscoord numShift1, numShift2, numShift3;
  nscoord denShift1, denShift2;

  GetNumeratorShifts(fm, numShift1, numShift2, numShift3);
  GetDenominatorShifts(fm, denShift1, denShift2);

  if (0 == actualRuleThickness) {
    numShift = displayStyle ? numShift1 : numShift3;
    denShift = displayStyle ? denShift1 : denShift2;
    if (mathFont) {
      numShift = mathFont->MathTable()->Constant(
          displayStyle ? gfxMathTable::StackTopDisplayStyleShiftUp
                       : gfxMathTable::StackTopShiftUp,
          oneDevPixel);
      denShift = mathFont->MathTable()->Constant(
          displayStyle ? gfxMathTable::StackBottomDisplayStyleShiftDown
                       : gfxMathTable::StackBottomShiftDown,
          oneDevPixel);
    }
  } else {
    numShift = displayStyle ? numShift1 : numShift2;
    denShift = displayStyle ? denShift1 : denShift2;
    if (mathFont) {
      numShift = mathFont->MathTable()->Constant(
          displayStyle ? gfxMathTable::FractionNumeratorDisplayStyleShiftUp
                       : gfxMathTable::FractionNumeratorShiftUp,
          oneDevPixel);
      denShift = mathFont->MathTable()->Constant(
          displayStyle ? gfxMathTable::FractionDenominatorDisplayStyleShiftDown
                       : gfxMathTable::FractionDenominatorShiftDown,
          oneDevPixel);
    }
  }

  if (0 == actualRuleThickness) {
    // Rule 15c, App. G, TeXbook

    // min clearance between numerator and denominator
    nscoord minClearance =
        displayStyle ? 7 * defaultRuleThickness : 3 * defaultRuleThickness;
    if (mathFont) {
      minClearance = mathFont->MathTable()->Constant(
          displayStyle ? gfxMathTable::StackDisplayStyleGapMin
                       : gfxMathTable::StackGapMin,
          oneDevPixel);
    }

    nscoord actualClearance = (numShift - bmNum.descent - numMargin.bottom) -
                              (bmDen.ascent + denMargin.top - denShift);
    // actualClearance should be >= minClearance
    if (actualClearance < minClearance) {
      nscoord halfGap = (minClearance - actualClearance) / 2;
      numShift += halfGap;
      denShift += halfGap;
    }
  } else {
    // Rule 15d, App. G, TeXbook

    // min clearance between numerator or denominator and middle of bar

    // TeX has a different interpretation of the thickness.
    // Try $a \above10pt b$ to see. Here is what TeX does:
    // minClearance = displayStyle ?
    //   3 * actualRuleThickness : actualRuleThickness;

    // we slightly depart from TeX here. We use the defaultRuleThickness
    // instead of the value coming from the linethickness attribute, i.e., we
    // recover what TeX does if the user hasn't set linethickness. But when
    // the linethickness is set, we avoid the wide gap problem.
    nscoord minClearanceNum = displayStyle ? 3 * defaultRuleThickness
                                           : defaultRuleThickness + onePixel;
    nscoord minClearanceDen = minClearanceNum;
    if (mathFont) {
      minClearanceNum = mathFont->MathTable()->Constant(
          displayStyle ? gfxMathTable::FractionNumDisplayStyleGapMin
                       : gfxMathTable::FractionNumeratorGapMin,
          oneDevPixel);
      minClearanceDen = mathFont->MathTable()->Constant(
          displayStyle ? gfxMathTable::FractionDenomDisplayStyleGapMin
                       : gfxMathTable::FractionDenominatorGapMin,
          oneDevPixel);
    }

    // adjust numShift to maintain minClearanceNum if needed
    nscoord actualClearanceNum = (numShift - bmNum.descent - numMargin.bottom) -
                                 (axisHeight + actualRuleThickness / 2);
    if (actualClearanceNum < minClearanceNum) {
      numShift += (minClearanceNum - actualClearanceNum);
    }
    // adjust denShift to maintain minClearanceDen if needed
    nscoord actualClearanceDen = (axisHeight - actualRuleThickness / 2) -
                                 (bmDen.ascent + denMargin.top - denShift);
    if (actualClearanceDen < minClearanceDen) {
      denShift += (minClearanceDen - actualClearanceDen);
    }
  }

  //////////////////
  // Place Children

  // XXX Need revisiting the width. TeX uses the exact width
  // e.g. in $$\huge\frac{\displaystyle\int}{i}$$
  nscoord width = std::max(bmNum.width + numMargin.LeftRight(),
                           bmDen.width + denMargin.LeftRight());
  nscoord dxNum =
      leftSpace + (width - sizeNum.Width() - numMargin.LeftRight()) / 2;
  nscoord dxDen =
      leftSpace + (width - sizeDen.Width() - denMargin.LeftRight()) / 2;
  width += leftSpace + rightSpace;

  mBoundingMetrics.rightBearing =
      std::max(dxNum + bmNum.rightBearing + numMargin.LeftRight(),
               dxDen + bmDen.rightBearing + denMargin.LeftRight());
  if (mBoundingMetrics.rightBearing < width - rightSpace) {
    mBoundingMetrics.rightBearing = width - rightSpace;
  }
  mBoundingMetrics.leftBearing =
      std::min(dxNum + bmNum.leftBearing, dxDen + bmDen.leftBearing);
  if (mBoundingMetrics.leftBearing > leftSpace) {
    mBoundingMetrics.leftBearing = leftSpace;
  }
  mBoundingMetrics.ascent = bmNum.ascent + numShift + numMargin.top;
  mBoundingMetrics.descent = bmDen.descent + denShift + denMargin.bottom;
  mBoundingMetrics.width = width;

  aDesiredSize.SetBlockStartAscent(numMargin.top + sizeNum.BlockStartAscent() +
                                   numShift);
  aDesiredSize.Height() = aDesiredSize.BlockStartAscent() + sizeDen.Height() +
                          denMargin.bottom - sizeDen.BlockStartAscent() +
                          denShift;
  aDesiredSize.Width() = mBoundingMetrics.width;
  aDesiredSize.mBoundingMetrics = mBoundingMetrics;

  // Apply width/height to math content box.
  auto sizes = GetWidthAndHeightForPlaceAdjustment(aFlags);
  auto shiftX = ApplyAdjustmentForWidthAndHeight(aFlags, sizes, aDesiredSize,
                                                 mBoundingMetrics);
  if (sizes.width) {
    // MathML Core says the math content box is horizontally centered
    // but the fraction bar still takes the full width of the content box.
    dxNum += shiftX;
    dxDen += shiftX;
    width = *sizes.width;
  }

  // Add padding+border.
  auto borderPadding = GetBorderPaddingForPlace(aFlags);
  InflateReflowAndBoundingMetrics(borderPadding, aDesiredSize,
                                  mBoundingMetrics);
  leftSpace += borderPadding.left;
  rightSpace += borderPadding.right;
  width += borderPadding.LeftRight();
  dxNum += borderPadding.left;
  dxDen += borderPadding.left;

  mReference.x = 0;
  mReference.y = aDesiredSize.BlockStartAscent();

  if (!aFlags.contains(PlaceFlag::MeasureOnly)) {
    nscoord dy;
    // place numerator
    dxNum += numMargin.left;
    dy = borderPadding.top + numMargin.top;
    FinishReflowChild(frameNum, presContext, sizeNum, nullptr, dxNum, dy,
                      ReflowChildFlags::Default);
    // place denominator
    dxDen += denMargin.left;
    dy =
        aDesiredSize.BlockStartAscent() + denShift - sizeDen.BlockStartAscent();
    FinishReflowChild(frameDen, presContext, sizeDen, nullptr, dxDen, dy,
                      ReflowChildFlags::Default);
    // place the fraction bar - dy is top of bar
    dy = aDesiredSize.BlockStartAscent() -
         (axisHeight + actualRuleThickness / 2);
    mLineRect.SetRect(leftSpace, dy, width - (leftSpace + rightSpace),
                      actualRuleThickness);
  }

  return NS_OK;
}

quality98%

¤ Dauer der Verarbeitung: 0.17 Sekunden (vorverarbeitet) ¤

Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.