/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <Diagram.hxx>
#include <AxisHelper.hxx>
#include <BaseGFXHelper.hxx>
#include <ChartTypeHelper.hxx>
#include <ChartTypeManager.hxx>
#include <ChartTypeTemplate.hxx>
#include <ChartType.hxx>
#include <DataSeriesHelper.hxx>
#include <PropertyHelper.hxx>
#include <RegressionCurveHelper.hxx>
#include <RegressionCurveModel.hxx>
#include "Wall.hxx"
#include <ModifyListenerHelper.hxx>
#include <UserDefinedProperties.hxx>
#include <ConfigColorScheme.hxx>
#include <DiagramHelper.hxx>
#include <ThreeDHelper.hxx>
#include <CloneHelper.hxx>
#include <SceneProperties.hxx>
#include <unonames.hxx>
#include <BaseCoordinateSystem.hxx>
#include <Legend.hxx>
#include <Axis.hxx>
#include <DataTable.hxx>
#include <servicenames_charttypes.hxx>
#include <defines.hxx>
#include <basegfx/numeric/ftools.hxx>
#include <com/sun/star/beans/PropertyAttribute.hpp>
#include <com/sun/star/chart2/AxisType.hpp>
#include <com/sun/star/chart2/DataPointGeometry3D.hpp>
#include <com/sun/star/chart2/StackingDirection.hpp>
#include <com/sun/star/chart2/RelativePosition.hpp>
#include <com/sun/star/chart2/RelativeSize.hpp>
#include <com/sun/star/chart2/PieChartSubType.hpp>
#include <com/sun/star/chart/MissingValueTreatment.hpp>
#include <com/sun/star/container/NoSuchElementException.hpp>
#include <com/sun/star/drawing/ShadeMode.hpp>
#include <com/sun/star/uno/XComponentContext.hpp>
#include <com/sun/star/util/CloseVetoException.hpp>
#include <cppuhelper/supportsservice.hxx>
#include <comphelper/diagnose_ex.hxx>
#include <o3tl/safeint.hxx>
#include <rtl/math.hxx>
#include <tools/helpers.hxx>
#include <algorithm>
#include <utility>
using namespace ::com::sun::star;
using namespace ::com::sun::star::beans::PropertyAttribute;
using namespace ::chart::SceneProperties;
using ::com::sun::star::beans::Property;
using ::com::sun::star::uno::Sequence;
using ::com::sun::star::uno::Reference;
using ::com::sun::star::uno::Any;
using ::osl::MutexGuard;
namespace
{
enum
{
PROP_DIAGRAM_REL_POS,
PROP_DIAGRAM_REL_SIZE,
PROP_DIAGRAM_POSSIZE_EXCLUDE_LABELS,
PROP_DIAGRAM_SORT_BY_X_VALUES,
PROP_DIAGRAM_CONNECT_BARS,
PROP_DIAGRAM_GROUP_BARS_PER_AXIS,
PROP_DIAGRAM_INCLUDE_HIDDEN_CELLS,
PROP_DIAGRAM_STARTING_ANGLE,
PROP_DIAGRAM_RIGHT_ANGLED_AXES,
PROP_DIAGRAM_PERSPECTIVE,
PROP_DIAGRAM_ROTATION_HORIZONTAL,
PROP_DIAGRAM_ROTATION_VERTICAL,
PROP_DIAGRAM_MISSING_VALUE_TREATMENT,
PROP_DIAGRAM_3DRELATIVEHEIGHT,
PROP_DIAGRAM_DATATABLEHBORDER,
PROP_DIAGRAM_OF_PIE_TYPE,
PROP_DIAGRAM_SPLIT_POS,
PROP_DIAGRAM_DATATABLEVBORDER,
PROP_DIAGRAM_DATATABLEOUTLINE,
PROP_DIAGRAM_EXTERNALDATA,
PROP_DIAGRAM_STYLE_INDEX
};
void lcl_AddPropertiesToVector(
std::vector< Property > & rOutProperties )
{
rOutProperties.emplace_back(
"RelativePosition",
PROP_DIAGRAM_REL_POS,
cppu::UnoType<chart2::RelativePosition>::get(),
beans::PropertyAttribute::BOUND
| beans::PropertyAttribute::MAYBEVOID );
rOutProperties.emplace_back(
"RelativeSize",
PROP_DIAGRAM_REL_SIZE,
cppu::UnoType<chart2::RelativeSize>::get(),
beans::PropertyAttribute::BOUND
| beans::PropertyAttribute::MAYBEVOID );
rOutProperties.emplace_back(
"PosSizeExcludeAxes",
PROP_DIAGRAM_POSSIZE_EXCLUDE_LABELS,
cppu::UnoType<
bool>::get(),
beans::PropertyAttribute::BOUND
| beans::PropertyAttribute::MAYBEDEFAULT );
rOutProperties.emplace_back( CHART_UNONAME_SORT_BY_XVALUES,
PROP_DIAGRAM_SORT_BY_X_VALUES,
cppu::UnoType<
bool>::get(),
beans::PropertyAttribute::BOUND
| beans::PropertyAttribute::MAYBEDEFAULT );
rOutProperties.emplace_back(
"ConnectBars",
PROP_DIAGRAM_CONNECT_BARS,
cppu::UnoType<
bool>::get(),
beans::PropertyAttribute::BOUND
| beans::PropertyAttribute::MAYBEDEFAULT );
rOutProperties.emplace_back(
"GroupBarsPerAxis",
PROP_DIAGRAM_GROUP_BARS_PER_AXIS,
cppu::UnoType<
bool>::get(),
beans::PropertyAttribute::BOUND
| beans::PropertyAttribute::MAYBEDEFAULT );
rOutProperties.emplace_back(
"IncludeHiddenCells",
PROP_DIAGRAM_INCLUDE_HIDDEN_CELLS,
cppu::UnoType<
bool>::get(),
beans::PropertyAttribute::BOUND
| beans::PropertyAttribute::MAYBEDEFAULT );
rOutProperties.emplace_back(
"StartingAngle",
PROP_DIAGRAM_STARTING_ANGLE,
cppu::UnoType<sal_Int32>::get(),
beans::PropertyAttribute::BOUND
| beans::PropertyAttribute::MAYBEDEFAULT );
rOutProperties.emplace_back(
"RightAngledAxes",
PROP_DIAGRAM_RIGHT_ANGLED_AXES,
cppu::UnoType<
bool>::get(),
beans::PropertyAttribute::BOUND
| beans::PropertyAttribute::MAYBEDEFAULT );
rOutProperties.emplace_back(
"Perspective",
PROP_DIAGRAM_PERSPECTIVE,
cppu::UnoType<sal_Int32>::get(),
beans::PropertyAttribute::MAYBEVOID );
rOutProperties.emplace_back(
"RotationHorizontal",
PROP_DIAGRAM_ROTATION_HORIZONTAL,
cppu::UnoType<sal_Int32>::get(),
beans::PropertyAttribute::MAYBEVOID );
rOutProperties.emplace_back(
"RotationVertical",
PROP_DIAGRAM_ROTATION_VERTICAL,
cppu::UnoType<sal_Int32>::get(),
beans::PropertyAttribute::MAYBEVOID );
rOutProperties.emplace_back(
"MissingValueTreatment",
PROP_DIAGRAM_MISSING_VALUE_TREATMENT,
cppu::UnoType<sal_Int32>::get(),
beans::PropertyAttribute::BOUND
| beans::PropertyAttribute::MAYBEVOID );
rOutProperties.emplace_back(
"3DRelativeHeight",
PROP_DIAGRAM_3DRELATIVEHEIGHT,
cppu::UnoType<sal_Int32>::get(),
beans::PropertyAttribute::MAYBEVOID );
rOutProperties.emplace_back(
"SubPieType",
PROP_DIAGRAM_OF_PIE_TYPE,
cppu::UnoType<chart2::PieChartSubType>::get(),
beans::PropertyAttribute::MAYBEVOID );
rOutProperties.emplace_back(
"SplitPos",
PROP_DIAGRAM_SPLIT_POS,
cppu::UnoType<sal_Int32>::get(),
beans::PropertyAttribute::MAYBEVOID );
rOutProperties.emplace_back(
"ExternalData",
PROP_DIAGRAM_EXTERNALDATA,
cppu::UnoType<OUString>::get(),
beans::PropertyAttribute::MAYBEVOID );
rOutProperties.emplace_back(
"StyleIndex",
PROP_DIAGRAM_STYLE_INDEX,
cppu::UnoType<OUString>::get(),
beans::PropertyAttribute::MAYBEVOID );
}
const ::chart::tPropertyValueMap& StaticDiagramDefaults()
{
static ::chart::tPropertyValueMap aStaticDefaults = []()
{
::chart::tPropertyValueMap aMap;
::chart::PropertyHelper::setPropertyValueDefault( aMap, PROP_DIAGRAM_POSSIZE_EXCLU
DE_LABELS, true );
::chart::PropertyHelper::setPropertyValueDefault( aMap, PROP_DIAGRAM_SORT_BY_X_VALUES, false );
::chart::PropertyHelper::setPropertyValueDefault( aMap, PROP_DIAGRAM_CONNECT_BARS, false );
::chart::PropertyHelper::setPropertyValueDefault( aMap, PROP_DIAGRAM_GROUP_BARS_PER_AXIS, true );
::chart::PropertyHelper::setPropertyValueDefault( aMap, PROP_DIAGRAM_INCLUDE_HIDDEN_CELLS, true );
::chart::PropertyHelper::setPropertyValueDefault( aMap, PROP_DIAGRAM_RIGHT_ANGLED_AXES, false );
::chart::PropertyHelper::setPropertyValueDefault< sal_Int32 >( aMap, PROP_DIAGRAM_STARTING_ANGLE, 90 );
::chart::PropertyHelper::setPropertyValueDefault< sal_Int32 >( aMap, PROP_DIAGRAM_3DRELATIVEHEIGHT, 100 );
::chart::PropertyHelper::setPropertyValueDefault< chart2::PieChartSubType >( aMap, PROP_DIAGRAM_OF_PIE_TYPE,
chart2::PieChartSubType_NONE);
::chart::PropertyHelper::setPropertyValueDefault< sal_Int32 >( aMap, PROP_DIAGRAM_SPLIT_POS, 2 );
::chart::SceneProperties::AddDefaultsToMap( aMap );
return aMap;
}();
return aStaticDefaults;
};
::cppu::OPropertyArrayHelper& StaticDiagramInfoHelper()
{
static ::cppu::OPropertyArrayHelper aPropHelper = []()
{
std::vector< css::beans::Property > aProperties;
lcl_AddPropertiesToVector( aProperties );
::chart::SceneProperties::AddPropertiesToVector( aProperties );
::chart::UserDefinedProperties::AddPropertiesToVector( aProperties );
std::sort( aProperties.begin(), aProperties.end(),
::chart::PropertyNameLess() );
return ::cppu::OPropertyArrayHelper( aProperties.data(), aProperties.size() );
}();
return aPropHelper;
};
const uno::Reference< beans::XPropertySetInfo >& StaticDiagramInfo()
{
static const uno::Reference< beans::XPropertySetInfo > xPropertySetInfo(
::cppu::OPropertySetHelper::createPropertySetInfo(StaticDiagramInfoHelper() ) );
return xPropertySetInfo;
};
void lcl_CloneCoordinateSystems(
const ::chart::Diagram::tCoordinateSystemContainerType & rSource,
::chart::Diagram::tCoordinateSystemContainerType & rDestination )
{
for( rtl::Reference< ::chart::BaseCoordinateSystem > const & i : rSource )
{
auto xClone = i->createClone();
::chart::BaseCoordinateSystem* pClone = dynamic_cast<::chart::BaseCoordinateSystem*>(xClone.get());
assert(pClone);
rDestination.push_back( pClone );
}
}
} // anonymous namespace
namespace chart
{
Diagram::Diagram( uno::Reference< uno::XComponentContext > xContext ) :
m_xContext(std::move( xContext )),
m_xModifyEventForwarder( new ModifyEventForwarder() )
{
// Set camera position to a default position (that should be set hard, so
// that it will be exported. The property default is a camera looking
// straight ono the scene). These defaults have been acquired from the old
// chart implementation.
setFastPropertyValue_NoBroadcast(
PROP_SCENE_CAMERA_GEOMETRY, uno::Any(
ThreeDHelper::getDefaultCameraGeometry()));
}
Diagram::Diagram( const Diagram & rOther ) :
impl::Diagram_Base(rOther),
::property::OPropertySet( rOther ),
m_xContext( rOther.m_xContext ),
m_xModifyEventForwarder( new ModifyEventForwarder() )
{
lcl_CloneCoordinateSystems( rOther.m_aCoordSystems, m_aCoordSystems );
for (auto & xSystem : m_aCoordSystems)
xSystem->addModifyListener(m_xModifyEventForwarder);
if ( rOther.m_xWall )
m_xWall = new Wall( *rOther.m_xWall );
if ( rOther.m_xFloor )
m_xFloor = new Wall( *rOther.m_xFloor );
m_xTitle.set( CloneHelper::CreateRefClone< chart2::XTitle >()( rOther.m_xTitle ));
if (rOther.m_xLegend)
m_xLegend = new Legend(*rOther.m_xLegend);
if (rOther.m_xDataTable)
m_xDataTable = new DataTable(*rOther.m_xDataTable);
if ( m_xWall )
m_xWall->addModifyListener( m_xModifyEventForwarder );
if ( m_xFloor )
m_xFloor->addModifyListener( m_xModifyEventForwarder );
ModifyListenerHelper::addListener( m_xTitle, m_xModifyEventForwarder );
ModifyListenerHelper::addListener( m_xLegend, m_xModifyEventForwarder );
}
Diagram::~Diagram()
{
try
{
for (auto & xSystem : m_aCoordSystems)
xSystem->removeModifyListener(m_xModifyEventForwarder);
if ( m_xWall )
m_xWall->removeModifyListener( m_xModifyEventForwarder );
if ( m_xFloor )
m_xFloor->removeModifyListener( m_xModifyEventForwarder );
ModifyListenerHelper::removeListener( m_xTitle, m_xModifyEventForwarder );
ModifyListenerHelper::removeListener( m_xLegend, m_xModifyEventForwarder );
}
catch( const uno::Exception & )
{
DBG_UNHANDLED_EXCEPTION("chart2");
}
}
// ____ XDiagram ____
uno::Reference< beans::XPropertySet > SAL_CALL Diagram::getWall()
{
rtl::Reference< Wall > xRet;
bool bAddListener = false;
{
MutexGuard aGuard( m_aMutex );
if( !m_xWall.is() )
{
m_xWall.set( new Wall() );
bAddListener = true;
}
xRet = m_xWall;
}
if(bAddListener)
xRet->addModifyListener( m_xModifyEventForwarder );
return xRet;
}
uno::Reference< beans::XPropertySet > SAL_CALL Diagram::getFloor()
{
rtl::Reference< Wall > xRet;
bool bAddListener = false;
{
MutexGuard aGuard( m_aMutex );
if( !m_xFloor.is() )
{
m_xFloor.set( new Wall() );
bAddListener = true;
}
xRet = m_xFloor;
}
if(bAddListener)
xRet->addModifyListener( m_xModifyEventForwarder );
return xRet;
}
uno::Reference< chart2::XLegend > SAL_CALL Diagram::getLegend()
{
MutexGuard aGuard( m_aMutex );
return m_xLegend;
}
rtl::Reference< ::chart::Legend > Diagram::getLegend2() const
{
MutexGuard aGuard( m_aMutex );
return m_xLegend;
}
void SAL_CALL Diagram::setLegend( const uno::Reference< chart2::XLegend >& xNewLegend )
{
auto pLegend = dynamic_cast<Legend*>(xNewLegend.get());
assert(!xNewLegend || pLegend);
setLegend(rtl::Reference< Legend >(pLegend));
}
void Diagram::setLegend( const rtl::Reference< Legend >& xNewLegend )
{
rtl::Reference< Legend > xOldLegend;
{
MutexGuard aGuard( m_aMutex );
if( m_xLegend == xNewLegend )
return;
xOldLegend = m_xLegend;
m_xLegend = xNewLegend;
}
if( xOldLegend.is())
ModifyListenerHelper::removeListener( xOldLegend, m_xModifyEventForwarder );
if( xNewLegend.is())
ModifyListenerHelper::addListener( xNewLegend, m_xModifyEventForwarder );
fireModifyEvent();
}
Reference< chart2::XColorScheme > SAL_CALL Diagram::getDefaultColorScheme()
{
Reference< chart2::XColorScheme > xRet;
{
MutexGuard aGuard( m_aMutex );
xRet = m_xColorScheme;
}
if( !xRet.is())
{
xRet.set( createConfigColorScheme( m_xContext ));
MutexGuard aGuard( m_aMutex );
m_xColorScheme = xRet;
}
return xRet;
}
void SAL_CALL Diagram::setDefaultColorScheme( const Reference< chart2::XColorScheme >& xColorScheme )
{
{
MutexGuard aGuard( m_aMutex );
m_xColorScheme.set( xColorScheme );
}
fireModifyEvent();
}
void SAL_CALL Diagram::setDiagramData(
const Reference< chart2::data::XDataSource >& xDataSource,
const Sequence< beans::PropertyValue >& aArguments )
{
rtl::Reference< ::chart::ChartTypeManager > xChartTypeManager = new ::chart::ChartTypeManager( m_xContext );
Diagram::tTemplateWithServiceName aTemplateAndService = getTemplate( xChartTypeManager );
rtl::Reference< ::chart::ChartTypeTemplate > xTemplate( aTemplateAndService.xChartTypeTemplate );
if( !xTemplate.is() )
xTemplate = xChartTypeManager->createTemplate( u"com.sun.star.chart2.template.Column"_ustr );
if(!xTemplate.is())
return;
xTemplate->changeDiagramData( rtl::Reference< ::chart::Diagram >(this), xDataSource, aArguments );
}
// ____ XTitled ____
uno::Reference< chart2::XTitle > SAL_CALL Diagram::getTitleObject()
{
MutexGuard aGuard( m_aMutex );
return m_xTitle;
}
void SAL_CALL Diagram::setTitleObject( const uno::Reference< chart2::XTitle >& xNewTitle )
{
Reference< chart2::XTitle > xOldTitle;
{
MutexGuard aGuard( m_aMutex );
if( m_xTitle == xNewTitle )
return;
xOldTitle = m_xTitle;
m_xTitle = xNewTitle;
}
if( xOldTitle.is())
ModifyListenerHelper::removeListener( xOldTitle, m_xModifyEventForwarder );
if( xNewTitle.is())
ModifyListenerHelper::addListener( xNewTitle, m_xModifyEventForwarder );
fireModifyEvent();
}
// ____ X3DDefaultSetter ____
void SAL_CALL Diagram::set3DSettingsToDefault()
{
setPropertyToDefault( u"D3DSceneDistance"_ustr);
setPropertyToDefault( u"D3DSceneFocalLength"_ustr);
setDefaultRotation();
setDefaultIllumination();
}
void SAL_CALL Diagram::setDefaultRotation()
{
bool bPieOrDonut( isPieOrDonutChart() );
setDefaultRotation( bPieOrDonut );
}
static ::basegfx::B3DHomMatrix lcl_getCompleteRotationMatrix( Diagram& rDiagram )
{
::basegfx::B3DHomMatrix aCompleteRotation;
double fXAngleRad=0.0;
double fYAngleRad=0.0;
double fZAngleRad=0.0;
rDiagram.getRotationAngle( fXAngleRad, fYAngleRad, fZAngleRad );
aCompleteRotation.rotate( fXAngleRad, fYAngleRad, fZAngleRad );
return aCompleteRotation;
}
static void lcl_RotateLightSource( Diagram& rDiagram
, int nLightSourceDirectionProp
, int nLightSourceOnProp
, const ::basegfx::B3DHomMatrix& rRotationMatrix )
{
bool bLightOn = false;
if( !(rDiagram.getFastPropertyValue( nLightSourceOnProp ) >>= bLightOn) )
return;
if( bLightOn )
{
drawing::Direction3D aLight;
if( rDiagram.getFastPropertyValue( nLightSourceDirectionProp ) >>= aLight )
{
::basegfx::B3DVector aLightVector( BaseGFXHelper::Direction3DToB3DVector( aLight ) );
aLightVector = rRotationMatrix*aLightVector;
rDiagram.setFastPropertyValue( nLightSourceDirectionProp
, uno::Any( BaseGFXHelper::B3DVectorToDirection3D( aLightVector ) ) );
}
}
}
static void lcl_setLightsForScheme( Diagram& rDiagram, const ThreeDLookScheme& rScheme )
{
if( rScheme == ThreeDLookScheme::ThreeDLookScheme_Unknown)
return;
// "D3DSceneLightOn2" / UNO_NAME_3D_SCENE_LIGHTON_2
rDiagram.setFastPropertyValue( PROP_SCENE_LIGHT_ON_2, uno::Any( true ) );
rtl::Reference< ChartType > xChartType( rDiagram.getChartTypeByIndex( 0 ) );
uno::Any aADirection( rScheme == ThreeDLookScheme::ThreeDLookScheme_Simple
? ChartTypeHelper::getDefaultSimpleLightDirection(xChartType)
: ChartTypeHelper::getDefaultRealisticLightDirection(xChartType) );
// "D3DSceneLightDirection2" / UNO_NAME_3D_SCENE_LIGHTDIRECTION_2
rDiagram.setFastPropertyValue( PROP_SCENE_LIGHT_DIRECTION_2, aADirection );
//rotate light direction when right angled axes are off but supported
{
bool bRightAngledAxes = false;
rDiagram.getFastPropertyValue( PROP_DIAGRAM_RIGHT_ANGLED_AXES ) >>= bRightAngledAxes; // "RightAngledAxes"
if(!bRightAngledAxes)
{
if (xChartType.is() ? xChartType->isSupportingRightAngledAxes() : true)
{
::basegfx::B3DHomMatrix aRotation( lcl_getCompleteRotationMatrix( rDiagram ) );
BaseGFXHelper::ReduceToRotationMatrix( aRotation );
// "D3DSceneLightDirection2", "D3DSceneLightOn2"
lcl_RotateLightSource( rDiagram, PROP_SCENE_LIGHT_DIRECTION_2, PROP_SCENE_LIGHT_ON_2, aRotation );
}
}
}
sal_Int32 nColor = ::chart::ChartTypeHelper::getDefaultDirectLightColor(
rScheme == ThreeDLookScheme::ThreeDLookScheme_Simple, xChartType);
// "D3DSceneLightColor2" / UNO_NAME_3D_SCENE_LIGHTCOLOR_2
rDiagram.setFastPropertyValue( PROP_SCENE_LIGHT_COLOR_2, uno::Any( nColor ) );
sal_Int32 nAmbientColor = ::chart::ChartTypeHelper::getDefaultAmbientLightColor(
rScheme == ThreeDLookScheme::ThreeDLookScheme_Simple, xChartType);
// "D3DSceneAmbientColor" / UNO_NAME_3D_SCENE_AMBIENTCOLOR
rDiagram.setFastPropertyValue( PROP_SCENE_AMBIENT_COLOR, uno::Any( nAmbientColor ) );
}
void SAL_CALL Diagram::setDefaultIllumination()
{
drawing::ShadeMode aShadeMode( drawing::ShadeMode_SMOOTH );
try
{
// "D3DSceneShadeMode"
getFastPropertyValue( PROP_SCENE_SHADE_MODE )>>= aShadeMode;
// "D3DSceneLightOn1" / UNO_NAME_3D_SCENE_LIGHTON_1
setFastPropertyValue( PROP_SCENE_LIGHT_ON_1, uno::Any( false ) );
setFastPropertyValue( PROP_SCENE_LIGHT_ON_3, uno::Any( false ) );
setFastPropertyValue( PROP_SCENE_LIGHT_ON_4, uno::Any( false ) );
setFastPropertyValue( PROP_SCENE_LIGHT_ON_5, uno::Any( false ) );
setFastPropertyValue( PROP_SCENE_LIGHT_ON_6, uno::Any( false ) );
setFastPropertyValue( PROP_SCENE_LIGHT_ON_7, uno::Any( false ) );
setFastPropertyValue( PROP_SCENE_LIGHT_ON_8, uno::Any( false ) );
}
catch( const uno::Exception & )
{
DBG_UNHANDLED_EXCEPTION("chart2");
}
ThreeDLookScheme aScheme = (aShadeMode == drawing::ShadeMode_FLAT)
? ThreeDLookScheme::ThreeDLookScheme_Simple
: ThreeDLookScheme::ThreeDLookScheme_Realistic;
lcl_setLightsForScheme( *this, aScheme );
}
// ____ XCoordinateSystemContainer ____
void SAL_CALL Diagram::addCoordinateSystem(
const uno::Reference< chart2::XCoordinateSystem >& aCoordSys )
{
::chart::BaseCoordinateSystem* pCoordSys = dynamic_cast<::chart::BaseCoordinateSystem*>(aCoordSys.get());
assert(pCoordSys);
{
MutexGuard aGuard( m_aMutex );
if( std::find( m_aCoordSystems.begin(), m_aCoordSystems.end(), pCoordSys )
!= m_aCoordSystems.end())
throw lang::IllegalArgumentException(u"coordsys not found"_ustr, static_cast<cppu::OWeakObject*>(this), 1);
if( !m_aCoordSystems.empty() )
{
OSL_FAIL( "more than one coordinatesystem is not supported yet by the fileformat" );
return;
}
m_aCoordSystems.push_back( pCoordSys );
}
ModifyListenerHelper::addListener( aCoordSys, m_xModifyEventForwarder );
fireModifyEvent();
}
void SAL_CALL Diagram::removeCoordinateSystem(
const uno::Reference< chart2::XCoordinateSystem >& aCoordSys )
{
::chart::BaseCoordinateSystem* pCoordSys = dynamic_cast<::chart::BaseCoordinateSystem*>(aCoordSys.get());
assert(pCoordSys);
{
MutexGuard aGuard( m_aMutex );
auto aIt = std::find( m_aCoordSystems.begin(), m_aCoordSystems.end(), pCoordSys );
if( aIt == m_aCoordSystems.end())
throw container::NoSuchElementException(
u"The given coordinate-system is no element of the container"_ustr,
static_cast< uno::XWeak * >( this ));
m_aCoordSystems.erase( aIt );
}
ModifyListenerHelper::removeListener( aCoordSys, m_xModifyEventForwarder );
fireModifyEvent();
}
uno::Sequence< uno::Reference< chart2::XCoordinateSystem > > SAL_CALL Diagram::getCoordinateSystems()
{
MutexGuard aGuard( m_aMutex );
return comphelper::containerToSequence<uno::Reference< chart2::XCoordinateSystem >>( m_aCoordSystems );
}
Diagram::tCoordinateSystemContainerType Diagram::getBaseCoordinateSystems() const
{
MutexGuard aGuard( m_aMutex );
return m_aCoordSystems;
}
void SAL_CALL Diagram::setCoordinateSystems(
const Sequence< Reference< chart2::XCoordinateSystem > >& aCoordinateSystems )
{
tCoordinateSystemContainerType aNew;
tCoordinateSystemContainerType aOld;
if( aCoordinateSystems.hasElements() )
{
OSL_ENSURE( aCoordinateSystems.getLength()<=1, "more than one coordinatesystem is not supported yet by the fileformat" );
::chart::BaseCoordinateSystem* pCoordSys = dynamic_cast<::chart::BaseCoordinateSystem*>(aCoordinateSystems[0].get());
assert(pCoordSys);
aNew.push_back( pCoordSys );
}
{
MutexGuard aGuard( m_aMutex );
std::swap( aOld, m_aCoordSystems );
m_aCoordSystems = aNew;
}
for (auto & xSystem : aOld)
xSystem->removeModifyListener(m_xModifyEventForwarder);
for (auto & xSystem : aNew)
xSystem->addModifyListener(m_xModifyEventForwarder);
fireModifyEvent();
}
void Diagram::setCoordinateSystems(
const std::vector< rtl::Reference< BaseCoordinateSystem > >& aCoordinateSystems )
{
tCoordinateSystemContainerType aNew;
tCoordinateSystemContainerType aOld;
if( !aCoordinateSystems.empty() )
{
OSL_ENSURE( aCoordinateSystems.size()<=1, "more than one coordinatesystem is not supported yet by the fileformat" );
aNew.push_back( aCoordinateSystems[0] );
}
{
MutexGuard aGuard( m_aMutex );
std::swap( aOld, m_aCoordSystems );
m_aCoordSystems = aNew;
}
for (auto & xSystem : aOld)
xSystem->removeModifyListener(m_xModifyEventForwarder);
for (auto & xSystem : aNew)
xSystem->addModifyListener(m_xModifyEventForwarder);
fireModifyEvent();
}
// ____ XCloneable ____
Reference< util::XCloneable > SAL_CALL Diagram::createClone()
{
MutexGuard aGuard( m_aMutex );
return Reference< util::XCloneable >( new Diagram( *this ));
}
// ____ XModifyBroadcaster ____
void SAL_CALL Diagram::addModifyListener( const Reference< util::XModifyListener >& aListener )
{
m_xModifyEventForwarder->addModifyListener( aListener );
}
void SAL_CALL Diagram::removeModifyListener( const Reference< util::XModifyListener >& aListener )
{
m_xModifyEventForwarder->removeModifyListener( aListener );
}
// ____ XModifyListener ____
void SAL_CALL Diagram::modified( const lang::EventObject& aEvent )
{
m_xModifyEventForwarder->modified( aEvent );
}
// ____ XEventListener (base of XModifyListener) ____
void SAL_CALL Diagram::disposing( const lang::EventObject& /* Source */ )
{
// nothing
}
// ____ OPropertySet ____
void Diagram::firePropertyChangeEvent()
{
fireModifyEvent();
}
void Diagram::fireModifyEvent()
{
m_xModifyEventForwarder->modified( lang::EventObject( static_cast< uno::XWeak* >( this )));
}
// ____ OPropertySet ____
void Diagram::GetDefaultValue( sal_Int32 nHandle, uno::Any& rAny ) const
{
const tPropertyValueMap& rStaticDefaults = StaticDiagramDefaults();
tPropertyValueMap::const_iterator aFound( rStaticDefaults.find( nHandle ) );
if( aFound == rStaticDefaults.end() )
rAny.clear();
else
rAny = (*aFound).second;
}
// ____ OPropertySet ____
::cppu::IPropertyArrayHelper & SAL_CALL Diagram::getInfoHelper()
{
return StaticDiagramInfoHelper();
}
// ____ XPropertySet ____
uno::Reference< beans::XPropertySetInfo > SAL_CALL Diagram::getPropertySetInfo()
{
return StaticDiagramInfo();
}
// ____ XFastPropertySet ____
void SAL_CALL Diagram::setFastPropertyValue_NoBroadcast( sal_Int32 nHandle, const Any& rValue )
{
//special treatment for some 3D properties
if( nHandle == PROP_DIAGRAM_PERSPECTIVE )
{
sal_Int32 fPerspective = 20;
if( rValue >>=fPerspective )
setCameraDistance( ThreeDHelper::PerspectiveToCameraDistance( fPerspective ) );
}
else if( nHandle == PROP_DIAGRAM_ROTATION_HORIZONTAL
|| nHandle == PROP_DIAGRAM_ROTATION_VERTICAL )
{
sal_Int32 nNewAngleDegree = 0;
if( rValue >>=nNewAngleDegree )
{
sal_Int32 nHorizontal, nVertical;
getRotation( nHorizontal, nVertical );
if( nHandle == PROP_DIAGRAM_ROTATION_HORIZONTAL )
nHorizontal = nNewAngleDegree;
else
nVertical = nNewAngleDegree;
setRotation( nHorizontal, nVertical );
}
}
else
::property::OPropertySet::setFastPropertyValue_NoBroadcast( nHandle, rValue );
}
void SAL_CALL Diagram::getFastPropertyValue( Any& rValue, sal_Int32 nHandle ) const
{
//special treatment for some 3D properties
if( nHandle == PROP_DIAGRAM_PERSPECTIVE )
{
sal_Int32 nPerspective = ::basegfx::fround( ThreeDHelper::CameraDistanceToPerspective(
const_cast< Diagram* >( this )->getCameraDistance() ) );
rValue <<= nPerspective;
}
else if( nHandle == PROP_DIAGRAM_ROTATION_HORIZONTAL
|| nHandle == PROP_DIAGRAM_ROTATION_VERTICAL )
{
sal_Int32 nHorizontal, nVertical;
const_cast< Diagram* >( this )->getRotation( nHorizontal, nVertical );
sal_Int32 nAngleDegree = 0;
if( nHandle == PROP_DIAGRAM_ROTATION_HORIZONTAL )
nAngleDegree = nHorizontal;
else
nAngleDegree = nVertical;
rValue <<= nAngleDegree;
}
else
::property::OPropertySet::getFastPropertyValue( rValue,nHandle );
}
uno::Reference<chart2::XDataTable> SAL_CALL Diagram::getDataTable()
{
MutexGuard aGuard( m_aMutex );
return m_xDataTable;
}
rtl::Reference<::chart::DataTable> Diagram::getDataTableRef() const
{
MutexGuard aGuard( m_aMutex );
return m_xDataTable;
}
void SAL_CALL Diagram::setDataTable(const uno::Reference<chart2::XDataTable>& xDataTable)
{
auto* pDataTable = dynamic_cast<DataTable*>(xDataTable.get());
assert(!xDataTable || pDataTable);
setDataTable(rtl::Reference<DataTable>(pDataTable));
}
void Diagram::setDataTable(const rtl::Reference<DataTable>& xNewDataTable)
{
rtl::Reference<DataTable> xOldDataTable;
{
MutexGuard aGuard(m_aMutex);
if (m_xDataTable == xNewDataTable)
return;
xOldDataTable = m_xDataTable;
m_xDataTable = xNewDataTable;
}
if (xOldDataTable.is())
ModifyListenerHelper::removeListener(xOldDataTable, m_xModifyEventForwarder);
if (xNewDataTable.is())
ModifyListenerHelper::addListener(xNewDataTable, m_xModifyEventForwarder);
fireModifyEvent();
}
using impl::Diagram_Base;
IMPLEMENT_FORWARD_XINTERFACE2( Diagram, Diagram_Base, ::property::OPropertySet )
IMPLEMENT_FORWARD_XTYPEPROVIDER2( Diagram, Diagram_Base, ::property::OPropertySet )
// implement XServiceInfo methods basing upon getSupportedServiceNames_Static
OUString SAL_CALL Diagram::getImplementationName()
{
return u"com.sun.star.comp.chart2.Diagram"_ustr;
}
sal_Bool SAL_CALL Diagram::supportsService( const OUString& rServiceName )
{
return cppu::supportsService(this, rServiceName);
}
css::uno::Sequence< OUString > SAL_CALL Diagram::getSupportedServiceNames()
{
return {
u"com.sun.star.chart2.Diagram"_ustr,
u"com.sun.star.layout.LayoutElement"_ustr,
u"com.sun.star.beans.PropertySet"_ustr };
}
DiagramPositioningMode Diagram::getDiagramPositioningMode()
{
DiagramPositioningMode eMode = DiagramPositioningMode::Auto;
chart2::RelativePosition aRelPos;
chart2::RelativeSize aRelSize;
if( (getFastPropertyValue(PROP_DIAGRAM_REL_POS) >>= aRelPos ) &&
(getFastPropertyValue(PROP_DIAGRAM_REL_SIZE) >>= aRelSize ) )
{
bool bPosSizeExcludeAxes=false;
getFastPropertyValue(PROP_DIAGRAM_POSSIZE_EXCLUDE_LABELS) >>= bPosSizeExcludeAxes;
if( bPosSizeExcludeAxes )
eMode = DiagramPositioningMode::Excluding;
else
eMode = DiagramPositioningMode::Including;
}
return eMode;
}
sal_Int32 Diagram::getCorrectedMissingValueTreatment(
const rtl::Reference< ChartType >& xChartType )
{
sal_Int32 nResult = css::chart::MissingValueTreatment::LEAVE_GAP;
const uno::Sequence < sal_Int32 > aAvailableMissingValueTreatments(
ChartTypeHelper::getSupportedMissingValueTreatments( xChartType ) );
if( getFastPropertyValue( PROP_DIAGRAM_MISSING_VALUE_TREATMENT ) >>= nResult )
{
//ensure that the set value is supported by this charttype
for( sal_Int32 n : aAvailableMissingValueTreatments )
if( n == nResult )
return nResult; //ok
}
//otherwise use the first supported one
if( aAvailableMissingValueTreatments.hasElements() )
{
nResult = aAvailableMissingValueTreatments[0];
return nResult;
}
return nResult;
}
void Diagram::setGeometry3D( sal_Int32 nNewGeometry )
{
std::vector< rtl::Reference< DataSeries > > aSeriesVec =
getDataSeries();
for (auto const& series : aSeriesVec)
{
series->setPropertyAlsoToAllAttributedDataPoints(
u"Geometry3D"_ustr, uno::Any( nNewGeometry ));
}
}
sal_Int32 Diagram::getGeometry3D( bool& rbFound, bool& rbAmbiguous )
{
sal_Int32 nCommonGeom( css::chart2::DataPointGeometry3D::CUBOID );
rbFound = false;
rbAmbiguous = false;
std::vector< rtl::Reference< DataSeries > > aSeriesVec = getDataSeries();
if( aSeriesVec.empty())
rbAmbiguous = true;
for (auto const& series : aSeriesVec)
{
try
{
sal_Int32 nGeom = 0;
if( series->getPropertyValue( u"Geometry3D"_ustr) >>= nGeom )
{
if( ! rbFound )
{
// first series
nCommonGeom = nGeom;
rbFound = true;
}
// further series: compare for uniqueness
else if( nCommonGeom != nGeom )
{
rbAmbiguous = true;
break;
}
}
}
catch( const uno::Exception & )
{
DBG_UNHANDLED_EXCEPTION("chart2");
}
}
return nCommonGeom;
}
bool Diagram::isPieOrDonutChart()
{
rtl::Reference< ChartType > xChartType = getChartTypeByIndex( 0 );
if( xChartType .is() )
{
OUString aChartType = xChartType->getChartType();
if( aChartType == CHART2_SERVICE_NAME_CHARTTYPE_PIE )
return true;
}
return false;
}
bool Diagram::isSupportingFloorAndWall()
{
//pies and donuts currently do not support this because of wrong files from older versions
//todo: allow this in future again, if fileversion is available for OLE objects (metastream)
//thus the wrong bottom can be removed on import
const std::vector< rtl::Reference< ChartType > > aTypes = getChartTypes();
for( rtl::Reference< ChartType > const & xType : aTypes )
{
OUString sChartType = xType->getChartType();
if( sChartType.match(CHART2_SERVICE_NAME_CHARTTYPE_PIE) )
return false;
if( sChartType.match(CHART2_SERVICE_NAME_CHARTTYPE_NET) )
return false;
if( sChartType.match(CHART2_SERVICE_NAME_CHARTTYPE_FILLED_NET) )
return false;
}
return true;
}
/**
* This method implements the logic of checking if a series can be moved
* forward/backward. Depending on the "bDoMove" parameter the series will
* be moved (bDoMove = true) or the function just will test if the
* series can be moved without doing the move (bDoMove = false).
*
* @param xDiagram
* Reference to the diagram that contains the series.
*
* @param xGivenDataSeries
* Reference to the series that should moved or tested for moving.
*
* @param bForward
* Direction in which the series should be moved or tested for moving.
*
* @param bDoMove
* Should this function really move the series (true) or just test if it is
* possible (false).
*
*
* @returns
* in case of bDoMove == true
* - True : if the move was done
* - False : the move failed
* in case of bDoMove == false
* - True : the series can be moved
* - False : the series can not be moved
*
*/
static bool lcl_moveSeriesOrCheckIfMoveIsAllowed(
const Diagram& rDiagram,
const rtl::Reference< DataSeries >& xGivenDataSeries,
bool bForward,
bool bDoMove )
{
bool bMovedOrMoveAllowed = false;
try
{
if( !xGivenDataSeries.is() )
return false;
//find position of series.
bool bFound = false;
const std::vector< rtl::Reference< BaseCoordinateSystem > > aCooSysList( rDiagram.getBaseCoordinateSystems() );
for( std::size_t nCS = 0; !bFound && nCS < aCooSysList.size(); ++nCS )
{
const rtl::Reference< BaseCoordinateSystem > & xCooSys( aCooSysList[nCS] );
//iterate through all chart types in the current coordinate system
std::vector< rtl::Reference< ChartType > > aChartTypeList( xCooSys->getChartTypes2() );
rtl::Reference< ChartType > xFormerChartType;
for( std::size_t nT = 0; !bFound && nT < aChartTypeList.size(); ++nT )
{
rtl::Reference< ChartType > xCurrentChartType( aChartTypeList[nT] );
//iterate through all series in this chart type
std::vector< rtl::Reference< DataSeries > > aSeriesList = xCurrentChartType->getDataSeries2();
for( std::size_t nS = 0; !bFound && nS < aSeriesList.size(); ++nS )
{
// We found the series we are interested in!
if( xGivenDataSeries==aSeriesList[nS] )
{
std::size_t nOldSeriesIndex = nS;
bFound = true;
try
{
sal_Int32 nNewSeriesIndex = nS;
// tdf#34517 Bringing forward means increasing, backwards means decreasing series position
if( !bForward )
nNewSeriesIndex--;
else
nNewSeriesIndex++;
if( nNewSeriesIndex >= 0 && o3tl::make_unsigned(nNewSeriesIndex) < aSeriesList.size() )
{
//move series in the same charttype
bMovedOrMoveAllowed = true;
if( bDoMove )
{
aSeriesList[ nOldSeriesIndex ] = aSeriesList[ nNewSeriesIndex ];
aSeriesList[ nNewSeriesIndex ] = xGivenDataSeries;
xCurrentChartType->setDataSeries( aSeriesList );
}
}
else if( nNewSeriesIndex<0 )
{
//exchange series with former charttype
if( xFormerChartType.is() && DiagramHelper::areChartTypesCompatible( xFormerChartType, xCurrentChartType ) )
{
bMovedOrMoveAllowed = true;
if( bDoMove )
{
std::vector< rtl::Reference< DataSeries > > aOtherSeriesList = xFormerChartType->getDataSeries2();
sal_Int32 nOtherSeriesIndex = aOtherSeriesList.size()-1;
if( nOtherSeriesIndex >= 0 && o3tl::make_unsigned(nOtherSeriesIndex) < aOtherSeriesList.size() )
{
rtl::Reference< DataSeries > xExchangeSeries( aOtherSeriesList[nOtherSeriesIndex] );
aOtherSeriesList[nOtherSeriesIndex] = xGivenDataSeries;
xFormerChartType->setDataSeries(aOtherSeriesList);
aSeriesList[nOldSeriesIndex] = std::move(xExchangeSeries);
xCurrentChartType->setDataSeries(aSeriesList);
}
}
}
}
else if( nT+1 < aChartTypeList.size() )
{
//exchange series with next charttype
const rtl::Reference< ChartType >& xOtherChartType( aChartTypeList[nT+1] );
if( xOtherChartType.is() && DiagramHelper::areChartTypesCompatible( xOtherChartType, xCurrentChartType ) )
{
bMovedOrMoveAllowed = true;
if( bDoMove )
{
std::vector< rtl::Reference< DataSeries > > aOtherSeriesList = xOtherChartType->getDataSeries2();
if( !aOtherSeriesList.empty() )
{
rtl::Reference<DataSeries> xExchangeSeries(aOtherSeriesList[0]);
aOtherSeriesList[0] = xGivenDataSeries;
xOtherChartType->setDataSeries(aOtherSeriesList);
aSeriesList[nOldSeriesIndex] = std::move(xExchangeSeries);
xCurrentChartType->setDataSeries(aSeriesList);
}
}
}
}
}
catch( const util::CloseVetoException& )
{
}
catch( const uno::RuntimeException& )
{
}
}
}
xFormerChartType = std::move(xCurrentChartType);
}
}
}
catch( const util::CloseVetoException& )
{
}
catch( const uno::RuntimeException& )
{
}
return bMovedOrMoveAllowed;
}
bool Diagram::isSeriesMoveable(
const rtl::Reference< DataSeries >& xGivenDataSeries,
bool bForward )
{
const bool bDoMove = false;
bool bIsMoveable = lcl_moveSeriesOrCheckIfMoveIsAllowed(
*this, xGivenDataSeries, bForward, bDoMove );
return bIsMoveable;
}
bool Diagram::moveSeries( const rtl::Reference< DataSeries >& xGivenDataSeries, bool bForward )
{
const bool bDoMove = true;
bool bMoved = lcl_moveSeriesOrCheckIfMoveIsAllowed(
*this, xGivenDataSeries, bForward, bDoMove );
return bMoved;
}
std::vector< rtl::Reference< ChartType > > Diagram::getChartTypes()
{
std::vector< rtl::Reference< ChartType > > aResult;
try
{
for( rtl::Reference< BaseCoordinateSystem > const & coords : getBaseCoordinateSystems() )
{
const std::vector< rtl::Reference< ChartType > > & aChartTypeSeq( coords->getChartTypes2());
aResult.insert( aResult.end(), aChartTypeSeq.begin(), aChartTypeSeq.end() );
}
}
catch( const uno::Exception & )
{
DBG_UNHANDLED_EXCEPTION("chart2");
}
return aResult;
}
rtl::Reference< ChartType > Diagram::getChartTypeByIndex( sal_Int32 nIndex )
{
rtl::Reference< ChartType > xChartType;
//iterate through all coordinate systems
sal_Int32 nTypesSoFar = 0;
for( rtl::Reference< BaseCoordinateSystem > const & coords : getBaseCoordinateSystems() )
{
const std::vector< rtl::Reference< ChartType > > & aChartTypeList( coords->getChartTypes2() );
if( nIndex >= 0 && o3tl::make_unsigned(nIndex) < nTypesSoFar + aChartTypeList.size() )
{
xChartType = aChartTypeList[nIndex - nTypesSoFar];
break;
}
nTypesSoFar += aChartTypeList.size();
}
return xChartType;
}
bool Diagram::isSupportingDateAxis()
{
auto xChartType = getChartTypeByIndex(0);
return xChartType.is() ? xChartType->isSupportingDateAxis(0) : true;
}
static std::vector< rtl::Reference< Axis > > lcl_getAxisHoldingCategoriesFromDiagram(
const Diagram& rDiagram )
{
std::vector< rtl::Reference< Axis > > aRet;
// return first x-axis as fall-back
rtl::Reference< Axis > xFallBack;
try
{
for( rtl::Reference< BaseCoordinateSystem > const & xCooSys : rDiagram.getBaseCoordinateSystems() )
{
OSL_ASSERT( xCooSys.is());
for( sal_Int32 nN = xCooSys->getDimension(); nN--; )
{
const sal_Int32 nMaximumScaleIndex = xCooSys->getMaximumAxisIndexByDimension(nN);
for(sal_Int32 nI=0; nI<=nMaximumScaleIndex; ++nI)
{
rtl::Reference< Axis > xAxis = xCooSys->getAxisByDimension2( nN,nI );
OSL_ASSERT( xAxis.is());
if( xAxis.is())
{
chart2::ScaleData aScaleData = xAxis->getScaleData();
if( aScaleData.Categories.is() || (aScaleData.AxisType == chart2::AxisType::CATEGORY) )
{
aRet.push_back(xAxis);
}
if( (nN == 0) && !xFallBack.is())
xFallBack = std::move(xAxis);
}
}
}
}
}
catch( const uno::Exception & )
{
DBG_UNHANDLED_EXCEPTION("chart2" );
}
if( aRet.empty() )
aRet.push_back(xFallBack);
return aRet;
}
uno::Reference< chart2::data::XLabeledDataSequence > Diagram::getCategories()
{
uno::Reference< chart2::data::XLabeledDataSequence > xResult;
try
{
std::vector< rtl::Reference< Axis > > aCatAxes(
lcl_getAxisHoldingCategoriesFromDiagram( *this ));
//search for first categories
if (aCatAxes.empty())
return xResult;
const rtl::Reference< Axis >& xCatAxis(aCatAxes[0]);
if( !xCatAxis.is())
return xResult;
chart2::ScaleData aScaleData( xCatAxis->getScaleData());
if( !aScaleData.Categories.is() )
return xResult;
xResult = aScaleData.Categories;
uno::Reference<beans::XPropertySet> xProp(xResult->getValues(), uno::UNO_QUERY );
if( xProp.is() )
{
try
{
xProp->setPropertyValue( u"Role"_ustr, uno::Any( u"categories"_ustr ) );
}
catch( const uno::Exception & )
{
DBG_UNHANDLED_EXCEPTION("chart2");
}
}
}
catch( const uno::Exception & )
{
DBG_UNHANDLED_EXCEPTION("chart2");
}
return xResult;
}
void Diagram::setCategories(
const uno::Reference< chart2::data::XLabeledDataSequence >& xCategories,
bool bSetAxisType /* = false */,
bool bCategoryAxis /* = true */ )
{
std::vector< rtl::Reference< Axis > > aCatAxes(
lcl_getAxisHoldingCategoriesFromDiagram( *this ));
for (const rtl::Reference< Axis >& xCatAxis : aCatAxes)
{
if( xCatAxis.is())
{
chart2::ScaleData aScaleData( xCatAxis->getScaleData());
aScaleData.Categories = xCategories;
if( bSetAxisType )
{
if( bCategoryAxis )
aScaleData.AxisType = chart2::AxisType::CATEGORY;
else if( aScaleData.AxisType == chart2::AxisType::CATEGORY || aScaleData.AxisType == chart2::AxisType::DATE )
aScaleData.AxisType = chart2::AxisType::REALNUMBER;
}
xCatAxis->setScaleData( aScaleData );
}
}
}
bool Diagram::isCategory()
{
try
{
for( rtl::Reference< BaseCoordinateSystem > const & xCooSys : getBaseCoordinateSystems() )
{
for( sal_Int32 nN = xCooSys->getDimension(); nN--; )
{
const sal_Int32 nMaximumScaleIndex = xCooSys->getMaximumAxisIndexByDimension(nN);
for(sal_Int32 nI=0; nI<=nMaximumScaleIndex; ++nI)
{
rtl::Reference< Axis > xAxis = xCooSys->getAxisByDimension2( nN,nI );
OSL_ASSERT( xAxis.is());
if( xAxis.is())
{
chart2::ScaleData aScaleData = xAxis->getScaleData();
if( aScaleData.AxisType == chart2::AxisType::CATEGORY || aScaleData.AxisType == chart2::AxisType::DATE )
return true;
}
}
}
}
}
catch( const uno::Exception & )
{
DBG_UNHANDLED_EXCEPTION("chart2");
}
return false;
}
std::vector< std::vector< rtl::Reference< DataSeries > > >
Diagram::getDataSeriesGroups()
{
std::vector< std::vector< rtl::Reference< DataSeries > > > aResult;
//iterate through all coordinate systems
for( rtl::Reference< BaseCoordinateSystem > const & coords : getBaseCoordinateSystems() )
{
//iterate through all chart types in the current coordinate system
for( rtl::Reference< ChartType > const & chartType : coords->getChartTypes2() )
{
aResult.push_back( chartType->getDataSeries2() );
}
}
return aResult;
}
std::vector< rtl::Reference< ::chart::DataSeries > >
Diagram::getDataSeries()
{
std::vector< rtl::Reference< DataSeries > > aResult;
try
{
for( rtl::Reference< BaseCoordinateSystem > const & coords : getBaseCoordinateSystems() )
{
for( rtl::Reference< ChartType> const & chartType : coords->getChartTypes2() )
{
const std::vector< rtl::Reference< DataSeries > > aSeriesSeq( chartType->getDataSeries2() );
aResult.insert( aResult.end(), aSeriesSeq.begin(), aSeriesSeq.end() );
}
}
}
catch( const uno::Exception & )
{
DBG_UNHANDLED_EXCEPTION("chart2");
}
return aResult;
}
rtl::Reference< ChartType > Diagram::getChartTypeOfSeries(
const rtl::Reference< DataSeries >& xGivenDataSeries )
{
if( !xGivenDataSeries.is() )
return nullptr;
//iterate through the model to find the given xSeries
//the found parent indicates the charttype
//iterate through all coordinate systems
for( rtl::Reference< BaseCoordinateSystem > const & xCooSys : getBaseCoordinateSystems() )
{
//iterate through all chart types in the current coordinate system
const std::vector< rtl::Reference< ChartType > > & aChartTypeList( xCooSys->getChartTypes2() );
for( rtl::Reference< ChartType > const & xChartType : aChartTypeList )
{
//iterate through all series in this chart type
for( rtl::Reference< DataSeries > const & dataSeries : xChartType->getDataSeries2() )
{
if( xGivenDataSeries==dataSeries )
return xChartType;
}
}
}
return nullptr;
}
rtl::Reference< Axis > Diagram::getAttachedAxis(
const rtl::Reference< DataSeries >& xSeries )
{
return AxisHelper::getAxis( 1, !xSeries || xSeries->isAttachedToMainAxis(), this );
}
bool Diagram::attachSeriesToAxis( bool bAttachToMainAxis
, const rtl::Reference< DataSeries >& xDataSeries
, const uno::Reference< uno::XComponentContext > & xContext
, bool bAdaptAxes )
{
bool bChanged = false;
//set property at axis
sal_Int32 nNewAxisIndex = bAttachToMainAxis ? 0 : 1;
sal_Int32 nOldAxisIndex = xDataSeries->getAttachedAxisIndex();
rtl::Reference< Axis > xOldAxis = getAttachedAxis( xDataSeries );
if( nOldAxisIndex != nNewAxisIndex )
{
try
{
xDataSeries->setPropertyValue( u"AttachedAxisIndex"_ustr, uno::Any( nNewAxisIndex ) );
bChanged = true;
}
catch( const uno::Exception & )
{
DBG_UNHANDLED_EXCEPTION("chart2");
}
}
if( bChanged )
{
rtl::Reference< Axis > xAxis = AxisHelper::getAxis( 1, bAttachToMainAxis, this );
if(!xAxis.is()) //create an axis if necessary
xAxis = AxisHelper::createAxis( 1, bAttachToMainAxis, this, xContext );
if( bAdaptAxes )
{
AxisHelper::makeAxisVisible( xAxis );
AxisHelper::hideAxisIfNoDataIsAttached( xOldAxis, this );
}
}
return bChanged;
}
void Diagram::replaceCoordinateSystem(
const rtl::Reference< BaseCoordinateSystem > & xCooSysToReplace,
const rtl::Reference< BaseCoordinateSystem > & xReplacement )
{
// update the coordinate-system container
try
{
uno::Reference< chart2::data::XLabeledDataSequence > xCategories = getCategories();
// move chart types of xCooSysToReplace to xReplacement
xReplacement->setChartTypes( xCooSysToReplace->getChartTypes());
removeCoordinateSystem( xCooSysToReplace );
addCoordinateSystem( xReplacement );
if( xCategories.is() )
setCategories( xCategories );
}
catch( const uno::Exception & )
{
DBG_UNHANDLED_EXCEPTION("chart2");
}
}
sal_Int32 Diagram::getDimension()
{
// -1: not yet set
sal_Int32 nResult = -1;
try
{
for( rtl::Reference< BaseCoordinateSystem > const & xCooSys : getBaseCoordinateSystems() )
{
if(xCooSys.is())
{
nResult = xCooSys->getDimension();
break;
}
}
}
catch( const uno::Exception & )
{
DBG_UNHANDLED_EXCEPTION("chart2");
}
return nResult;
}
void Diagram::setDimension( sal_Int32 nNewDimensionCount )
{
if( getDimension() == nNewDimensionCount )
return;
try
{
bool rbFound = false;
bool rbAmbiguous = true;
StackMode eStackMode = getStackMode( rbFound, rbAmbiguous );
bool bIsSupportingOnlyDeepStackingFor3D=false;
//change all coordinate systems:
auto aCoordSystems = getBaseCoordinateSystems();
for( rtl::Reference<BaseCoordinateSystem> const & xOldCooSys : aCoordSystems )
{
rtl::Reference< BaseCoordinateSystem > xNewCooSys;
const std::vector< rtl::Reference< ChartType > > aChartTypeList( xOldCooSys->getChartTypes2() );
for( rtl::Reference< ChartType > const & xChartType : aChartTypeList )
{
bIsSupportingOnlyDeepStackingFor3D = xChartType.is() ? xChartType->isSupportingOnlyDeepStackingFor3D() : false;
if(!xNewCooSys.is())
{
xNewCooSys = dynamic_cast<BaseCoordinateSystem*>(xChartType->createCoordinateSystem( nNewDimensionCount ).get());
assert(xNewCooSys);
break;
}
//@todo make sure that all following charttypes are also capable of the new dimension
//otherwise separate them in a different group
//BM: might be done in replaceCoordinateSystem()
}
// replace the old coordinate system at all places where it was used
replaceCoordinateSystem( xOldCooSys, xNewCooSys );
}
//correct stack mode if necessary
if( nNewDimensionCount==3 && eStackMode != StackMode::ZStacked && bIsSupportingOnlyDeepStackingFor3D )
setStackMode( StackMode::ZStacked );
else if( nNewDimensionCount==2 && eStackMode == StackMode::ZStacked )
setStackMode( StackMode::NONE );
}
catch( const uno::Exception & )
{
DBG_UNHANDLED_EXCEPTION("chart2");
}
}
void Diagram::setStackMode( StackMode eStackMode )
{
try
{
bool bValueFound = false;
bool bIsAmbiguous = false;
StackMode eOldStackMode = getStackMode( bValueFound, bIsAmbiguous );
if( eStackMode == eOldStackMode && !bIsAmbiguous )
return;
chart2::StackingDirection eNewDirection = chart2::StackingDirection_NO_STACKING;
if( eStackMode == StackMode::YStacked || eStackMode == StackMode::YStackedPercent )
eNewDirection = chart2::StackingDirection_Y_STACKING;
else if( eStackMode == StackMode::ZStacked )
eNewDirection = chart2::StackingDirection_Z_STACKING;
uno::Any aNewDirection( eNewDirection );
bool bPercent = false;
if( eStackMode == StackMode::YStackedPercent )
bPercent = true;
//iterate through all coordinate systems
for( rtl::Reference< BaseCoordinateSystem > const & xCooSys : getBaseCoordinateSystems() )
{
//set correct percent stacking
const sal_Int32 nMaximumScaleIndex = xCooSys->getMaximumAxisIndexByDimension(1);
for(sal_Int32 nI=0; nI<=nMaximumScaleIndex; ++nI)
{
rtl::Reference< Axis > xAxis = xCooSys->getAxisByDimension2( 1,nI );
if( xAxis.is())
{
chart2::ScaleData aScaleData = xAxis->getScaleData();
if( (aScaleData.AxisType==chart2::AxisType::PERCENT) != bPercent )
{
if( bPercent )
aScaleData.AxisType = chart2::AxisType::PERCENT;
else
aScaleData.AxisType = chart2::AxisType::REALNUMBER;
xAxis->setScaleData( aScaleData );
}
}
}
//iterate through all chart types in the current coordinate system
const std::vector< rtl::Reference< ChartType > > & aChartTypeList( xCooSys->getChartTypes2() );
if (aChartTypeList.empty())
continue;
rtl::Reference< ChartType > xChartType( aChartTypeList[0] );
//iterate through all series in this chart type
for( rtl::Reference< DataSeries > const & dataSeries : xChartType->getDataSeries2() )
{
dataSeries->setPropertyValue( u"StackingDirection"_ustr, aNewDirection );
}
}
}
catch( const uno::Exception & )
{
DBG_UNHANDLED_EXCEPTION("chart2");
}
}
StackMode Diagram::getStackMode( bool& rbFound, bool& rbAmbiguous )
{
rbFound=false;
rbAmbiguous=false;
StackMode eGlobalStackMode = StackMode::NONE;
//iterate through all coordinate systems
for( rtl::Reference< BaseCoordinateSystem > const & xCooSys : getBaseCoordinateSystems() )
{
//iterate through all chart types in the current coordinate system
std::vector< rtl::Reference< ChartType > > aChartTypeList( xCooSys->getChartTypes2() );
for( std::size_t nT = 0; nT < aChartTypeList.size(); ++nT )
{
const rtl::Reference< ChartType >& xChartType( aChartTypeList[nT] );
StackMode eLocalStackMode = DiagramHelper::getStackModeFromChartType(
xChartType, rbFound, rbAmbiguous, xCooSys );
if( rbFound && eLocalStackMode != eGlobalStackMode && nT>0 )
{
rbAmbiguous = true;
return eGlobalStackMode;
}
eGlobalStackMode = eLocalStackMode;
}
}
return eGlobalStackMode;
}
void Diagram::setVertical( bool bVertical /* = true */ )
{
try
{
uno::Any aValue;
aValue <<= bVertical;
for( rtl::Reference< BaseCoordinateSystem > const & xCooSys : getBaseCoordinateSystems() )
{
bool bChanged = false;
bool bOldSwap = false;
if( !(xCooSys->getPropertyValue(u"SwapXAndYAxis"_ustr) >>= bOldSwap)
|| bVertical != bOldSwap )
bChanged = true;
if( bChanged )
xCooSys->setPropertyValue(u"SwapXAndYAxis"_ustr, aValue);
const sal_Int32 nDimensionCount = xCooSys->getDimension();
sal_Int32 nDimIndex = 0;
for (nDimIndex=0; nDimIndex < nDimensionCount; ++nDimIndex)
{
const sal_Int32 nMaximumScaleIndex = xCooSys->getMaximumAxisIndexByDimension(nDimIndex);
for (sal_Int32 nI = 0; nI <= nMaximumScaleIndex; ++nI)
{
rtl::Reference<Axis> xAxis = xCooSys->getAxisByDimension2(nDimIndex,nI);
if (!xAxis.is())
continue;
//adapt title rotation only when axis swapping has changed
if (!bChanged)
continue;
Reference< beans::XPropertySet > xTitleProps( xAxis->getTitleObject(), uno::UNO_QUERY );
if (!xTitleProps.is())
continue;
double fAngleDegree = 0.0;
xTitleProps->getPropertyValue(u"TextRotation"_ustr) >>= fAngleDegree;
if (fAngleDegree != 0.0 &&
!rtl::math::approxEqual(fAngleDegree, 90.0))
continue;
double fNewAngleDegree = 0.0;
if( !bVertical && nDimIndex == 1 )
fNewAngleDegree = 90.0;
else if( bVertical && nDimIndex == 0 )
fNewAngleDegree = 90.0;
xTitleProps->setPropertyValue(u"TextRotation"_ustr, uno::Any(fNewAngleDegree));
}
}
}
}
catch( const uno::Exception & )
{
DBG_UNHANDLED_EXCEPTION("chart2");
}
}
bool Diagram::getVertical( bool& rbFound, bool& rbAmbiguous )
{
bool bValue = false;
rbFound = false;
rbAmbiguous = false;
for (rtl::Reference<BaseCoordinateSystem> const & coords : getBaseCoordinateSystems())
{
bool bCurrent = false;
if (coords->getPropertyValue(u"SwapXAndYAxis"_ustr) >>= bCurrent)
{
if (!rbFound)
{
bValue = bCurrent;
rbFound = true;
}
else if (bCurrent != bValue)
{
// ambiguous -> choose always first found
rbAmbiguous = true;
}
}
}
return bValue;
}
Diagram::tTemplateWithServiceName
Diagram::getTemplate(
const rtl::Reference< ::chart::ChartTypeManager > & xChartTypeManager )
{
tTemplateWithServiceName aResult;
if( !xChartTypeManager )
return aResult;
Sequence< OUString > aServiceNames( xChartTypeManager->getAvailableServiceNames());
const sal_Int32 nLength = aServiceNames.getLength();
bool bTemplateFound = false;
for( sal_Int32 i = 0; ! bTemplateFound && i < nLength; ++i )
{
try
{
rtl::Reference< ::chart::ChartTypeTemplate > xTempl =
xChartTypeManager->createTemplate( aServiceNames[ i ] );
if (xTempl.is() && xTempl->matchesTemplate2(this, true))
{
aResult.xChartTypeTemplate = std::move(xTempl);
aResult.sServiceName = aServiceNames[ i ];
bTemplateFound = true;
}
}
catch( const uno::Exception & )
{
DBG_UNHANDLED_EXCEPTION("chart2");
}
}
return aResult;
}
std::vector< rtl::Reference< RegressionCurveModel > >
Diagram::getAllRegressionCurvesNotMeanValueLine()
{
std::vector< rtl::Reference< RegressionCurveModel > > aResult;
std::vector< rtl::Reference< DataSeries > > aSeries( getDataSeries());
for (auto const& elem : aSeries)
{
for( rtl::Reference< RegressionCurveModel > const & curve : elem->getRegressionCurves2() )
{
if( ! RegressionCurveHelper::isMeanValueLine( curve ))
aResult.push_back( curve );
}
}
return aResult;
}
double Diagram::getCameraDistance()
{
double fCameraDistance = FIXED_SIZE_FOR_3D_CHART_VOLUME;
try
{
drawing::CameraGeometry aCG( ThreeDHelper::getDefaultCameraGeometry() );
getFastPropertyValue( PROP_SCENE_CAMERA_GEOMETRY ) >>= aCG;
::basegfx::B3DVector aVRP( BaseGFXHelper::Position3DToB3DVector( aCG.vrp ) );
fCameraDistance = aVRP.getLength();
ThreeDHelper::ensureCameraDistanceRange( fCameraDistance );
}
catch( const uno::Exception & )
{
DBG_UNHANDLED_EXCEPTION("chart2");
}
return fCameraDistance;
}
void Diagram::setCameraDistance(double fCameraDistance )
{
try
{
if( fCameraDistance <= 0 )
fCameraDistance = FIXED_SIZE_FOR_3D_CHART_VOLUME;
drawing::CameraGeometry aCG( ThreeDHelper::getDefaultCameraGeometry() );
getFastPropertyValue( PROP_SCENE_CAMERA_GEOMETRY ) >>= aCG;
::basegfx::B3DVector aVRP( BaseGFXHelper::Position3DToB3DVector( aCG.vrp ) );
if( ::basegfx::fTools::equalZero( aVRP.getLength() ) )
aVRP = ::basegfx::B3DVector(0,0,1);
aVRP.setLength(fCameraDistance);
--> --------------------
--> maximum size reached
--> --------------------
