/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/.
*/
namespace
{ /// Tests for svx/source/customshapes/ code. class CustomshapesTest : public UnoApiTest
{ public:
CustomshapesTest()
: UnoApiTest(u"svx/qa/unit/data/"_ustr)
{
}
protected: // get shape nShapeIndex from page 0
uno::Reference<drawing::XShape> getShape(sal_uInt8 nShapeIndex);
sal_uInt8 countShapes(); // fX and fY are positions relative to the size of the bitmap of the shape // Thus the position is independent from DPI
Color getColor(const uno::Reference<drawing::XShape>& xShape, constdouble& fX, constdouble& fY);
};
uno::Reference<drawing::XShape> CustomshapesTest::getShape(sal_uInt8 nShapeIndex)
{
uno::Reference<drawing::XDrawPagesSupplier> xDrawPagesSupplier(mxComponent,
uno::UNO_QUERY_THROW);
CPPUNIT_ASSERT_MESSAGE("Could not get XDrawPagesSupplier", xDrawPagesSupplier.is());
uno::Reference<drawing::XDrawPages> xDrawPages(xDrawPagesSupplier->getDrawPages());
uno::Reference<drawing::XDrawPage> xDrawPage(xDrawPages->getByIndex(0), uno::UNO_QUERY_THROW);
CPPUNIT_ASSERT_MESSAGE("Could not get xDrawPage", xDrawPage.is());
uno::Reference<drawing::XShape> xShape(xDrawPage->getByIndex(nShapeIndex), uno::UNO_QUERY);
CPPUNIT_ASSERT_MESSAGE("Could not get xShape", xShape.is()); return xShape;
}
sal_uInt8 CustomshapesTest::countShapes()
{
uno::Reference<drawing::XDrawPagesSupplier> xDrawPagesSupplier(mxComponent,
uno::UNO_QUERY_THROW);
CPPUNIT_ASSERT_MESSAGE("Could not get XDrawPagesSupplier", xDrawPagesSupplier.is());
uno::Reference<drawing::XDrawPages> xDrawPages(xDrawPagesSupplier->getDrawPages());
uno::Reference<drawing::XDrawPage> xDrawPage(xDrawPages->getByIndex(0), uno::UNO_QUERY_THROW);
CPPUNIT_ASSERT_MESSAGE("Could not get xDrawPage", xDrawPage.is()); return xDrawPage->getCount();
}
// Apply FontworkSameLetterHeights toggle // Without patch a debug build fails assert in SfxItemPool::DirectPutItemInPoolImpl and so crashes.
dispatchCommand(mxComponent, u".uno:FontworkSameLetterHeights"_ustr, {});
}
// Apply extrusion toggle // Without patch a debug build fails assert in SfxItemPool::DirectPutItemInPoolImpl and so crashes.
dispatchCommand(mxComponent, u".uno:ExtrusionToggle"_ustr, {});
}
CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf145700_3D_NonUI)
{ // The document contains first light soft, no ambient color, no second light and shininess 6. // Such settings are not available in the UI. It tests the actual color, not the geometry. // Load document
loadFromFile(u"tdf145700_3D_NonUI.doc");
// Read bitmap and test color // The expected values are taken from an image generated by Word // Without the changed methods the colors were in range RGB(17,11,17) to RGB(87,55,89).
SvFileStream aFileStream(maTempFile.GetURL(), StreamMode::READ);
vcl::PngImageReader aPNGReader(aFileStream);
BitmapEx aBMPEx = aPNGReader.read();
Bitmap aBMP = aBMPEx.GetBitmap();
BitmapScopedReadAccess pRead(aBMP);
Size aSize = aBMP.GetSizePixel(); // GetColor(Y,X)
Color aActualColor = pRead->GetColor(aSize.Height() / 2, aSize.Width() * 0.125);
Color aExpectedColor(107, 67, 109);
sal_uInt16 nColorDistance = aExpectedColor.GetColorError(aActualColor);
CPPUNIT_ASSERT_LESS(sal_uInt16(6), nColorDistance); // The current solution for soft light still can be improved. nColorDistance is high.
aActualColor = pRead->GetColor(aSize.Height() / 2, aSize.Width() * 0.45);
aExpectedColor = Color(179, 113, 183);
nColorDistance = aExpectedColor.GetColorError(aActualColor);
CPPUNIT_ASSERT_LESS(sal_uInt16(54), nColorDistance); // This point tests whether shininess is read and used. With default shininess it would be white.
aActualColor = pRead->GetColor(aSize.Height() / 2, aSize.Width() * 0.72);
aExpectedColor = Color(255, 231, 255);
nColorDistance = aExpectedColor.GetColorError(aActualColor);
CPPUNIT_ASSERT_LESS(sal_uInt16(14), nColorDistance);
}
CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf145700_3D_FrontLightDim)
{ // This tests the actual color, not the geometry. // Load document
loadFromFile(u"tdf145700_3D_FrontLightDim.doc");
// Read bitmap and test color in center
SvFileStream aFileStream(maTempFile.GetURL(), StreamMode::READ);
vcl::PngImageReader aPNGReader(aFileStream);
BitmapEx aBMPEx = aPNGReader.read();
Bitmap aBMP = aBMPEx.GetBitmap();
BitmapScopedReadAccess pRead(aBMP);
Size aSize = aBMP.GetSizePixel(); // GetColor(Y,X) const Color aActualColor = pRead->GetColor(aSize.Height() / 2, aSize.Width() / 2); const Color aExpectedColor(211, 247, 255); // from image generated by Word
sal_uInt16 nColorDistance = aExpectedColor.GetColorError(aActualColor);
CPPUNIT_ASSERT_LESS(sal_uInt16(3), nColorDistance);
}
CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf145956_Origin_Relative_BoundRect)
{ // The ViewPoint is relative to point Origin. The coordinates of point Origin are fractions of // the actual (2D) bounding rectangle of the shape, including rotation around z-axis and flip. // Error (among others) was, that the unrotated snap rectangle was used.
// The shape is extruded with 10cm. viewpoint="(0cm 0cm 25cm)", origin="0 0".
uno::Reference<drawing::XShape> xShape(getShape(0));
uno::Reference<beans::XPropertySet> xPropSet(xShape, uno::UNO_QUERY);
CPPUNIT_ASSERT_MESSAGE("Could not get the properties", xPropSet.is());
awt::Rectangle aBoundRect;
xPropSet->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRect;
sal_Int32 nActualTop = aBoundRect.Y;
// Without the fix it would have failed with top = 9462. // The tolerance 10 is estimated and can be adjusted if required for HiDPI.
CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("top", 10448, nActualTop, 10);
}
CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf145904_Extrusion_CenterZ_odt)
{ // The Z-component of the extrusion rotation center specifies the position in Hmm. // Error (among others) was, that the value was interpreted as Twips.
// The shape is extruded and tilt left 60deg. The rotation center is at -2000Hmm on the z-axis. // That is a position behind the back face of the extruded shape.
uno::Reference<drawing::XShape> xShape(getShape(0));
uno::Reference<beans::XPropertySet> xPropSet(xShape, uno::UNO_QUERY);
CPPUNIT_ASSERT_MESSAGE("Could not get the properties", xPropSet.is());
awt::Rectangle aBoundRect;
xPropSet->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRect;
awt::Point aAnchorPosition;
xPropSet->getPropertyValue(u"AnchorPosition"_ustr) >>= aAnchorPosition;
sal_Int32 nActualLeft = aBoundRect.X - aAnchorPosition.X;
// Without the fix it would have failed with left = 7731. // The tolerance 10 is estimated and can be adjusted if required for HiDPI.
CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("left", 3501, nActualLeft, 10);
}
CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf145904_Extrusion_CenterY_odt)
{ // The X- and Y-component of the extrusion rotation center specify the position as fraction of // shape size. Error was, that the relative fraction was handled as absolute value in Hmm.
// The shape is extruded and tilt down 90deg. The rotation center is in the middle between shape // center and bottom shape edge. The bottom edge of the projected solid has roughly the // y-coordinate of the rotation center.
uno::Reference<drawing::XShape> xShape(getShape(0));
uno::Reference<beans::XPropertySet> xPropSet(xShape, uno::UNO_QUERY);
CPPUNIT_ASSERT_MESSAGE("Could not get the properties", xPropSet.is());
awt::Rectangle aBoundRect;
xPropSet->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRect;
awt::Point aAnchorPosition;
xPropSet->getPropertyValue(u"AnchorPosition"_ustr) >>= aAnchorPosition;
sal_Int32 nActualTop = aBoundRect.Y - aAnchorPosition.Y;
// Without the fix it would have failed with top = 2252. // The tolerance 10 is estimated and can be adjusted if required for HiDPI.
CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("top", 3208, nActualTop, 10);
}
CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf145904_Extrusion_CenterY_doc)
{ // The X- and Y-component of the extrusion rotation center specify the position as fraction of // shape size. Error was, that the relative fraction was handled as absolute value in EMU.
// The shape is extruded and tilt down 90deg. The rotation center is in the middle between shape // center and bottom shape edge. The bottom edge of the projected solid has roughly the // y-coordinate of the center.
uno::Reference<drawing::XShape> xShape(getShape(0));
uno::Reference<beans::XPropertySet> xPropSet(xShape, uno::UNO_QUERY);
CPPUNIT_ASSERT_MESSAGE("Could not get the properties", xPropSet.is());
awt::Rectangle aBoundRect;
xPropSet->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRect;
awt::Point aAnchorPosition;
xPropSet->getPropertyValue(u"AnchorPosition"_ustr) >>= aAnchorPosition;
sal_Int32 nActualTop = aBoundRect.Y - aAnchorPosition.Y;
// Without the fix it would have failed with top = 2330 // The tolerance 10 is estimated and can be adjusted if required for HiDPI.
CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("top", 3208, nActualTop, 10);
}
CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf145245_ExtrusionPosition)
{ // The second parameter of the extrusion-depth property specifies how much of the extrusion // lies before the shape. The file contains three shapes which have the values 0, 0.5 and 1. // They are rotated around the x-axis so that the extrusion becomes visible. The extrusion // depth itself is 5cm. Y-coordinate of shape is 6cm.
// The tolerance 40 is estimated and can be adjusted if required for HiDPI.
{ // First shape has extrusion behind the shape.
uno::Reference<drawing::XShape> xShape0(getShape(0));
SdrObjCustomShape& rSdrCustomShape( static_cast<SdrObjCustomShape&>(*SdrObject::getSdrObjectFromXShape(xShape0)));
tools::Rectangle aBoundRect(rSdrCustomShape.GetCurrentBoundRect());
tools::Rectangle aExpected(Point(1000, 1000), Size(6002, 5001));
CPPUNIT_ASSERT_RECTANGLE_EQUAL_WITH_TOLERANCE(aExpected, aBoundRect, 40);
}
{ // Second shape has half of extrusion behind the shape.
uno::Reference<drawing::XShape> xShape(getShape(1));
SdrObjCustomShape& rSdrCustomShape( static_cast<SdrObjCustomShape&>(*SdrObject::getSdrObjectFromXShape(xShape))); // Without the fix the height was 1 instead of 5001.
tools::Rectangle aBoundRect(rSdrCustomShape.GetCurrentBoundRect());
tools::Rectangle aExpected(Point(9000, 3500), Size(6002, 5001));
CPPUNIT_ASSERT_RECTANGLE_EQUAL_WITH_TOLERANCE(aExpected, aBoundRect, 40);
}
{ // Third shape has extrusion before the shape.
uno::Reference<drawing::XShape> xShape(getShape(2));
SdrObjCustomShape& rSdrCustomShape( static_cast<SdrObjCustomShape&>(*SdrObject::getSdrObjectFromXShape(xShape))); // Without the fix the y-coordinate was 1000 instead of 6000.
tools::Rectangle aBoundRect(rSdrCustomShape.GetCurrentBoundRect());
tools::Rectangle aExpected(Point(18000, 6000), Size(6002, 5001));
CPPUNIT_ASSERT_RECTANGLE_EQUAL_WITH_TOLERANCE(aExpected, aBoundRect, 40);
}
}
CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf145111_Fontwork_rendering_font_size)
{ // The tested position and height depend on dpi. if (!IsDefaultDPI()) return;
// tdf#144988 In case ScaleX is true in property TextPath, the rendering font size should be // reduced in case any of the paragraphs would be longer as its sub-path. That was wrong, if // the first paragraph was too long and the second would fit. It resulted in wrong position // and height and overlapping characters.
// Without the fix in place left|top, width x height was 1279|1279, 2815 x 2448. // The expected values 1501|1777, 3947 x 1446 are only valid for 96dpi.
tools::Rectangle aBoundRect(rSdrCustomShape.GetCurrentBoundRect());
tools::Rectangle aExpected(Point(1501, 1777), Size(3947, 1446));
CPPUNIT_ASSERT_RECTANGLE_EQUAL_WITH_TOLERANCE(aExpected, aBoundRect, 5);
}
CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf145111_anchor_in_Fontwork)
{ // tdf#145004 In case ScaleX is true in property TextPath, SDRTEXTVERTADJUST is // evaluated and should shift the Fontwork text. That did not work for // 'Top-Left' and 'Bottom-Left'.
{ // First shape has anchor set to Top-Left, which shifts Fontwork text down.
uno::Reference<drawing::XShape> xShape(getShape(0));
SdrObjCustomShape& rSdrCustomShape( static_cast<SdrObjCustomShape&>(*SdrObject::getSdrObjectFromXShape(xShape)));
// Without the fix in place top was 2295, but should be 2900.
tools::Rectangle aBoundRect(rSdrCustomShape.GetCurrentBoundRect());
CPPUNIT_ASSERT_DOUBLES_EQUAL(tools::Long(2900), aBoundRect.Top(), 5);
}
{ // Second shape has anchor set to Bottom-Left, which shifts Fontwork text up.
uno::Reference<drawing::XShape> xShape(getShape(1));
SdrObjCustomShape& rSdrCustomShape( static_cast<SdrObjCustomShape&>(*SdrObject::getSdrObjectFromXShape(xShape)));
// Without the fix in place top was 10294, but should be 9500.
tools::Rectangle aBoundRect(rSdrCustomShape.GetCurrentBoundRect());
CPPUNIT_ASSERT_DOUBLES_EQUAL(tools::Long(9500), aBoundRect.Top(), 5);
}
}
CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf145004_gap_by_ScaleX)
{ if (!IsDefaultDPI()) return; // tdf#145004 In case property ScaleX=true was set in property 'TextPath' an additional // padding was added to the scaling factor. That results in a gap at start or/and end of // the text. Such gap should not be there.
// Load document and get shape. It is a custom shape from pptx import of a WordArt of // kind 'Follow Path'.
loadFromFile(u"tdf145004_gap_by_ScaleX.pptx");
uno::Reference<drawing::XShape> xShape(getShape(0));
SdrObjCustomShape& rSdrCustomShape( static_cast<SdrObjCustomShape&>(*SdrObject::getSdrObjectFromXShape(xShape)));
// Verify width. Without the fix in place the width was 8231, but should be 8496 for 96dpi. // Was 8328, should be 8527 for 120dpi.
tools::Rectangle aBoundRect(rSdrCustomShape.GetCurrentBoundRect());
CPPUNIT_ASSERT_DOUBLES_EQUAL(tools::Long(8496), aBoundRect.GetWidth(), 5);
}
CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf141021ExtrusionNorth)
{ // tdf#141021 Setting extrusion direction in projection method 'perspective' to // 'Extrusion North' had used a wrong origin for the ViewPoint and thus the // side faces were wrong calculated.
// Load document and get shape. It is a custom shape in 3D mode.
loadFromFile(u"tdf141021_ExtrusionNorth.odp");
uno::Reference<drawing::XShape> xShape(getShape(0));
SdrObjCustomShape& rSdrCustomShape( static_cast<SdrObjCustomShape&>(*SdrObject::getSdrObjectFromXShape(xShape)));
// Set direction
SfxRequest aReq(pViewShell->GetViewFrame(), SID_EXTRUSION_DIRECTION);
SfxInt32Item aItem(SID_EXTRUSION_DIRECTION, 90);
aReq.AppendItem(aItem);
SfxViewFrame* pFrame = SfxViewFrame::Current();
CPPUNIT_ASSERT(pFrame);
svx::ExtrusionBar::execute(pSdrView, aReq, pFrame->GetBindings());
// Verify height. Without the fix in place the height would 4001.
tools::Rectangle aBoundRect(rSdrCustomShape.GetCurrentBoundRect());
CPPUNIT_ASSERT_EQUAL(tools::Long(5895), aBoundRect.GetHeight());
}
CPPUNIT_TEST_FIXTURE(CustomshapesTest, testResizeRotatedShape)
{ // tdf#138945 Setting width or height for a rotated or sheared shape in the Position&Size dialog // had resulted in a mismatch of handle position and shape outline. That becomes visible in object // properties as mismatch of frame rectangle and bound rectangle. // Problem was, that fObjectRotation was not updated.
// Load document and get shape. It is a rectangle custom shape with 45° shear and 330° rotation.
loadFromFile(u"tdf138945_resizeRotatedShape.odg");
uno::Reference<drawing::XShape> xShape(getShape(0));
CPPUNIT_TEST_FIXTURE(CustomshapesTest, testViewBoxLeftTop)
{ // tdf#121890 formula values "left" and "top" are wrongly calculated // Load a document with two custom shapes of type "non-primitive"
loadFromFile(u"viewBox_positive_twolines_strict.odp"); // Get the shape "leftright". Error was, that the identifier "left" was always set to zero, thus // the path was outside the frame rectangle for a viewBox having a positive "left" value.
uno::Reference<drawing::XShape> xShapeLR(getShape(0));
uno::Reference<beans::XPropertySet> xShapeLRProps(xShapeLR, uno::UNO_QUERY);
CPPUNIT_ASSERT_MESSAGE("Could not get the shape 'leftright' properties", xShapeLRProps.is());
awt::Rectangle aFrameRectLR;
xShapeLRProps->getPropertyValue(UNO_NAME_MISC_OBJ_FRAMERECT) >>= aFrameRectLR;
awt::Rectangle aBoundRectLR;
xShapeLRProps->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRectLR; // difference should be zero, but allow some rounding errors
CPPUNIT_ASSERT_LESS(sal_Int32(3), std::abs(aFrameRectLR.X - aBoundRectLR.X));
// Get the shape "topbottom". Error was, that the identifier "top" was always set to zero, thus // the path was outside the frame rectangle for a viewBox having a positive "top" value.
uno::Reference<drawing::XShape> xShapeTB(getShape(1));
uno::Reference<beans::XPropertySet> xShapeTBProps(xShapeTB, uno::UNO_QUERY);
CPPUNIT_ASSERT_MESSAGE("Could not get the shape 'topbottom' properties", xShapeTBProps.is());
awt::Rectangle aFrameRectTB;
xShapeTBProps->getPropertyValue(UNO_NAME_MISC_OBJ_FRAMERECT) >>= aFrameRectTB;
awt::Rectangle aBoundRectTB;
xShapeTBProps->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRectTB; // difference should be zero, but allow some rounding errors
CPPUNIT_ASSERT_LESS(sal_Int32(3), std::abs(aFrameRectTB.Y - aBoundRectTB.Y));
}
CPPUNIT_TEST_FIXTURE(CustomshapesTest, testAccuracyCommandX)
{ // 121761 Increase accuracy of quarter circles drawn by command X or Y // The loaded document has a quarter circle with radius 10000 (unit 1/100 mm) // which is rotated by 45deg. The test considers the segment.
loadFromFile(u"tdf121761_Accuracy_command_X.odp"); // Get the shape "arc_45deg_rotated". Error was, that a Bezier curve with bad parameters // was used, thus the segment height was obviously smaller than for a true circle. // Math: segment height approx 10000 * ( 1 - sqrt(0.5)) + line width
uno::Reference<drawing::XShape> xShape(getShape(0));
uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY);
CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeProps.is());
awt::Rectangle aBoundRect;
xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRect; double fHeight = static_cast<double>(aBoundRect.Height); // The tolerance is a guess, might be smaller.
CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("segment height out of tolerance", 2942.0, fHeight, 8.0);
}
CPPUNIT_TEST_FIXTURE(CustomshapesTest, testToggleCommandXY)
{ // 121952 Toggle x- and y-direction if command X has several parameters // The loaded document has a shape with command X and two parameter placed on a diagonal. // The radius of the quarter circles are both 10000 (unit 1/100 mm). // The shape is rotated by 45deg, so you get two segments, one up and one down.
loadFromFile(u"tdf121952_Toggle_direction_command_X.odp"); // Error was, that the second segment was drawn with same direction as first one. If drawn // correctly, the bounding box height of the segments together is about twice the single // segment height. Math: segment height approx 10000 * ( 1 - sqrt(0.5)) + line width
uno::Reference<drawing::XShape> xShape(getShape(0));
uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY);
CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeProps.is());
awt::Rectangle aBoundRect;
xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRect; double fHeight = static_cast<double>(aBoundRect.Height); // The tolerance is a guess, might be smaller.
CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("segment height out of tolerance", 5871.0, fHeight, 16.0);
}
CPPUNIT_TEST_FIXTURE(CustomshapesTest, testMultipleMoveTo)
{ // tdf122964 Multiple moveTo has to be treated as lineTo in draw:enhanced-path // Load a document with path "M 0 0 5 10 10 0 N"
loadFromFile(u"tdf122964_MultipleMoveTo.odg"); // Error was, that the second and further parameter pairs were treated as moveTo, // and so the generated path was empty, resulting in zero width and height of the // bounding box. It has to be treated same as "M 0 0 L 5 10 10 0 N".
uno::Reference<drawing::XShape> xShape(getShape(0));
uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY);
CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeProps.is());
awt::Rectangle aBoundRect;
xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRect; bool bIsZero(aBoundRect.Height == 0 && aBoundRect.Width == 0);
CPPUNIT_ASSERT_MESSAGE("Path is empty", !bIsZero);
}
CPPUNIT_TEST_FIXTURE(CustomshapesTest, testWidthOrientationCommandU)
{ // tdf121845 custom shape with command U (angleellipse) is wrongly drawn // Load a document with path "M 750 0 L 750 500 250 500 250 0 U 500 0 500 500 0 180 N" // in viewBox="0 0 1000 500" and width="10cm", height="5cm".
loadFromFile(u"tdf121845_WidthOrientation_command_U.odg"); // Error was, that the width and height of the ellipse was halved and that the ellipse // was not drawn clockwise but counter clockwise.
uno::Reference<drawing::XShape> xShape(getShape(0));
uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY);
CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeProps.is());
awt::Rectangle aBoundRect;
xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRect; constdouble fWidth = static_cast<double>(aBoundRect.Width); // Need some tolerance for line width
CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("wrong width", 10000.0, fWidth, 40.0); constdouble fHeight = static_cast<double>(aBoundRect.Height); // Wrong orientation draws segment above the top of the viewBox and so increases 'Height'.
CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("wrong orientation", 5000.0, fHeight, 40.0);
}
CPPUNIT_TEST_FIXTURE(CustomshapesTest, testHalfEllipseVML)
{ // tdf121845 custom shape with command U (angleellipse) is wrongly drawn // Load a document which was converted from VML to doc by Word. It had a VML // path="m750,al500,,500,500,,-11796480e" resulting in a lower half circle.
loadFromFile(u"tdf121845_HalfEllipseVML.doc"); // Error was, that a full circle instead of the half circle was draw.
uno::Reference<drawing::XShape> xShape(getShape(0));
uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY);
CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeProps.is());
awt::Rectangle aBoundRect;
xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRect; constdouble fDiff2HmW = static_cast<double>(2 * aBoundRect.Height - aBoundRect.Width); // Need some tolerance for line width
CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("not a half circle", 0.0, fDiff2HmW, 40.0);
}
CPPUNIT_TEST_FIXTURE(CustomshapesTest, testLargeSwingAngleVML)
{ // tdf121845 custom shape with command U (angleellipse) is wrongly drawn // Load a document which was converted from VML to doc by Word. It had a VML // path="al50,50,45,45,2621440,31457280e" resulting in a full circle plus 120 deg segment.
loadFromFile(u"tdf121845_start40_swing480.doc"); // Error was, that only the 120 deg segment was drawn.
uno::Reference<drawing::XShape> xShape(getShape(0));
uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY);
CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeProps.is());
awt::Rectangle aBoundRect;
xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRect; constdouble fDiffWmH = static_cast<double>(aBoundRect.Width - aBoundRect.Height); // Need some tolerance for line width
CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("Full circle plus segment expected", 0.0, fDiffWmH, 10.0);
}
CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf121845_two_commands_U)
{ // tdf121845 custom shape with command U (angleellipse) is wrongly drawn // Load a document with path "U 950 250 200 200 90 180 250 250 200 200 180 270 N" // Error was, that the second ellipse segment was interpreted as command T and // thus a line from first to second segment was drawn.
loadFromFile(u"tdf121845_Two_commands_U.odg");
uno::Reference<drawing::XShape> xShape(getShape(0)); // In case no line is drawn, two polygons are generated; with line only one polygon
SdrObjCustomShape& rSdrObjCustomShape( static_cast<SdrObjCustomShape&>(*SdrObject::getSdrObjectFromXShape(xShape)));
EnhancedCustomShape2d aCustomShape2d(rSdrObjCustomShape);
rtl::Reference<SdrPathObj> pPathObj( static_cast<SdrPathObj*>(aCustomShape2d.CreateLineGeometry().get()));
CPPUNIT_ASSERT_MESSAGE("Could not convert to SdrPathObj", pPathObj); const basegfx::B2DPolyPolygon aPolyPolygon(pPathObj->GetPathPoly());
CPPUNIT_ASSERT_EQUAL_MESSAGE("count polygons", static_cast<sal_uInt32>(2),
aPolyPolygon.count());
}
CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf124212_handle_position)
{ // tdf124212 Adjustment handle reacts wrongly, if custom shape has a non // default viewBox. Load a document with svg:viewBox="10800 0 10800 21600" // Error was, that moving the controller results in a handle position that // does not reflect the movement.
loadFromFile(u"tdf124212_handle_position.odg");
uno::Reference<drawing::XShape> xShape(getShape(0)); // The shape has one, horizontal adjust handle.
SdrObjCustomShape& rSdrObjCustomShape( static_cast<SdrObjCustomShape&>(*SdrObject::getSdrObjectFromXShape(xShape)));
EnhancedCustomShape2d aCustomShape2d(rSdrObjCustomShape);
Point aInitialPosition;
aCustomShape2d.GetHandlePosition(0, aInitialPosition);
css::awt::Point aDesiredPosition(aInitialPosition.X() + 1000, aInitialPosition.Y());
aCustomShape2d.SetHandleControllerPosition(0, aDesiredPosition);
Point aObservedPosition;
aCustomShape2d.GetHandlePosition(0, aObservedPosition);
sal_Int32 nDesiredX(aDesiredPosition.X); // awt::Point
sal_Int32 nObservedX(aObservedPosition.X()); // tools::Point
CPPUNIT_ASSERT_EQUAL_MESSAGE("handle X coordinate", nDesiredX, nObservedX);
}
CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf124029_arc_position)
{ // tdf121029 MS binary custom shape mso_sptArc has wrong position // MS uses the sector for position reference. Error was, that // LibreOffice has used the underlying ellipse.
loadFromFile(u"tdf124029_Arc_position.doc");
uno::Reference<drawing::XShape> xShape(getShape(0)); // The visual wrong position is due to a wrong shape width.
uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY);
CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeProps.is());
awt::Rectangle aFrameRect;
xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_FRAMERECT) >>= aFrameRect;
CPPUNIT_ASSERT_EQUAL_MESSAGE("shape width", static_cast<sal_uInt32>(1610), static_cast<sal_uInt32>(aFrameRect.Width));
}
CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf124740_handle_path_coordsystem)
{ // tdf124740 OOXML shape with handle and w and h attribute on path has wrong // handle position // The handle position was scaled erroneously twice.
loadFromFile(u"tdf124740_HandleInOOXMLUserShape.pptx");
uno::Reference<drawing::XShape> xShape(getShape(0)); // The shape has one, horizontal adjust handle. It is about 1/5 of 10cm from left // shape edge, shape is 6cm from left . That results in a position // of 8cm from left page edge, which is 8000 in 1/100 mm unit.
SdrObjCustomShape& rSdrObjCustomShape( static_cast<SdrObjCustomShape&>(*SdrObject::getSdrObjectFromXShape(xShape)));
EnhancedCustomShape2d aCustomShape2d(rSdrObjCustomShape);
Point aPosition;
aCustomShape2d.GetHandlePosition(0, aPosition); double fX(aPosition.X()); // tolerance for rounding to integer
CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("handle X coordinate", 8000.0, fX, 2.0);
}
CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf115813_OOXML_XY_handle)
{ // The test covers all preset shapes with handles. Only these ones are // excluded: arc, blockArc, chord, circularArrow, gear6, gear9, mathNotEqual, pie, // leftCircularArrow, leftRightCircularArrow, swooshArrow. // Connectors are included as ordinary shapes to prevent converting. // Error was, that the handle movement and the changes to the shape did not follow // the mouse movement.
loadFromFile(u"tdf115813_HandleMovementOOXMLPresetShapes.pptx");
// values in vector InteractionsHandles are in 1/100 mm and refer to page for (sal_uInt8 i = 0; i < countShapes(); i++)
{
uno::Reference<drawing::XShape> xShape(getShape(i));
SdrObjCustomShape& rSdrObjCustomShape( static_cast<SdrObjCustomShape&>(*SdrObject::getSdrObjectFromXShape(xShape)));
OUString sShapeType(u"non-primitive"_ustr); // default for ODF const SdrCustomShapeGeometryItem& rGeometryItem(
rSdrObjCustomShape.GetMergedItem(SDRATTR_CUSTOMSHAPE_GEOMETRY)); const uno::Any* pAny = rGeometryItem.GetPropertyValueByName(u"Type"_ustr); if (pAny)
*pAny >>= sShapeType;
sal_uInt8 nHandlesCount = rSdrObjCustomShape.GetInteractionHandles().size(); for (sal_uInt8 j = 0; j < nHandlesCount; j++)
{
css::awt::Point aInitialPosition(
rSdrObjCustomShape.GetInteractionHandles()[j].aPosition); // The handles are initialized in the test document, so that if the handle is moveable in // that direction at all, then it can move at least with an amount of 100.
Point aDesiredPosition(aInitialPosition.X + 100, aInitialPosition.Y + 100);
rSdrObjCustomShape.DragMoveCustomShapeHdl(aDesiredPosition, j, false);
css::awt::Point aObservedPosition(
rSdrObjCustomShape.GetInteractionHandles()[j].aPosition);
sal_Int32 nDesiredX(aDesiredPosition.X()); // tools::Point
sal_Int32 nDesiredY(aDesiredPosition.Y());
sal_Int32 nObservedX(aObservedPosition.X); // css::awt::Point
sal_Int32 nObservedY(aObservedPosition.Y); // If a handle only moves in one direction, the difference is 100 for the other direction. // There exists some rounding differences, therefore '<= 1' instead of '== 0'. // The condition has the form '!(good cases)'. if (!((abs(nDesiredX - nObservedX) <= 1 && abs(nDesiredY - nObservedY) == 100)
|| (abs(nDesiredX - nObservedX) == 100 && abs(nDesiredY - nObservedY) <= 1)
|| (abs(nDesiredX - nObservedX) <= 1 && abs(nDesiredY - nObservedY) <= 1)))
{
OUString sError
= OUString::number(i) + " " + sShapeType + ": " + OUString::number(j) + " X "
+ OUString::number(nDesiredX) + "|" + OUString::number(nObservedX) + " Y "
+ OUString::number(nDesiredY) + "|" + OUString::number(nObservedY);
CPPUNIT_FAIL(sError.toUtf8().getStr());
}
}
}
}
CPPUNIT_TEST_FIXTURE(CustomshapesTest, testQuadraticCurveTo)
{ // tdf125782 command Q (quadraticcurveto) uses wrong 'current point'. // When converting to cubic Bezier curve, this had resulted in a wrong first control point. // The quadraticcurveto segment starts in shape center in the test file. The first control // point should produce a horizontal tangent in the start point.
loadFromFile(u"tdf125782_QuadraticCurveTo.odg");
uno::Reference<drawing::XShape> xShape(getShape(0));
uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY);
CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeProps.is());
awt::Rectangle aBoundRect;
xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRect; constdouble fHeight = static_cast<double>(aBoundRect.Height); //Add some tolerance
CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("bad height of quadraticcurveto", 3004, fHeight, 10.0);
}
CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf126512_OOXML_handle_in_ODP)
{ // The test covers all preset shapes with handles. Connectors are included as ordinary // shapes to prevent converting. The file was created in PowerPoint 365 and then // opened and exported to ODF format by LibreOffice. // Error was, that for shapes, which were originally imported from OOXML, the handles // could not be moved at all.
loadFromFile(u"tdf126512_OOXMLHandleMovementInODF.odp");
for (sal_uInt8 i = 0; i < countShapes(); i++)
{
uno::Reference<drawing::XShape> xShape(getShape(i));
SdrObjCustomShape& rSdrObjCustomShape( static_cast<SdrObjCustomShape&>(*SdrObject::getSdrObjectFromXShape(xShape)));
OUString sShapeType(u"non-primitive"_ustr); // only to initialize, value not used here const SdrCustomShapeGeometryItem& rGeometryItem(
rSdrObjCustomShape.GetMergedItem(SDRATTR_CUSTOMSHAPE_GEOMETRY)); const uno::Any* pAny = rGeometryItem.GetPropertyValueByName(u"Type"_ustr); if (pAny)
*pAny >>= sShapeType;
sal_uInt8 nHandlesCount = rSdrObjCustomShape.GetInteractionHandles().size(); for (sal_uInt8 j = 0; j < nHandlesCount; j++)
{
css::awt::Point aInitialPosition(
rSdrObjCustomShape.GetInteractionHandles()[j].aPosition); // The handles are initialized in the test document, so that if the handle is moveable // in that direction at all, then it can move at least with an amount of 100.
Point aDesiredPosition(aInitialPosition.X + 100, aInitialPosition.Y + 100);
rSdrObjCustomShape.DragMoveCustomShapeHdl(aDesiredPosition, j, false);
css::awt::Point aObservedPosition(
rSdrObjCustomShape.GetInteractionHandles()[j].aPosition); if (aInitialPosition.X == aObservedPosition.X
&& aInitialPosition.Y == aObservedPosition.Y)
{
OUString sError
= OUString::number(i) + " " + sShapeType + " " + OUString::number(j);
CPPUNIT_FAIL(sError.toUtf8().getStr());
}
}
}
}
CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf127785_Mirror)
{ // The document contains two shapes, one with horizontal flip, the other with vertical // flip. They are diamonds, so their text frame is symmetric to the center of the shape. // The shapes have not stroke and no fill, so that the bounding box surrounds the text // and therefore equals approximately the text frame. // Error was, that because of wrong calculation, the flipped shapes do not use the // text frame but the frame rectangle for their text.
loadFromFile(u"tdf127785_Mirror.odp");
CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf126060_3D_Z_Rotation)
{ // The document contains one textbox with inside overflowed text // and the text has 3D z rotation. When we open the document we // should see the text vertically and rotated from text bound center not text box.
CPPUNIT_ASSERT_EQUAL_MESSAGE("Wrong transformation at 0,0 position", 1492.0,
aObjectTransform.get(0, 0));
CPPUNIT_ASSERT_EQUAL_MESSAGE("Wrong transformation at 0,1 position", 0.0,
aObjectTransform.get(0, 1));
CPPUNIT_ASSERT_EQUAL_MESSAGE("Wrong transformation at 0,2 position", 1129.0,
aObjectTransform.get(0, 2));
CPPUNIT_ASSERT_EQUAL_MESSAGE("Wrong transformation at 1,0 position", 0.0,
aObjectTransform.get(1, 0));
CPPUNIT_ASSERT_EQUAL_MESSAGE("Wrong transformation at 1,1 position", 2500.0,
aObjectTransform.get(1, 1));
CPPUNIT_ASSERT_EQUAL_MESSAGE("Wrong transformation at 1,2 position", 5846.0,
aObjectTransform.get(1, 2));
}
CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf127785_Asymmetric)
{ // The document contains a shapes with vertical flip and text frame asymmetrical // to shape. The shape has not stroke and no fill, so that the bounding box surrounds // the text and therefore equals approximately the text frame. // Error was, that the 180deg text rotation was not compensated for the position of // the flipped text box.
loadFromFile(u"tdf127785_asymmetricTextBoxFlipV.odg");
uno::Reference<drawing::XShape> xShape(getShape(0));
uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY);
CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeProps.is());
awt::Rectangle aBoundRect;
xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRect;
CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf127785_TextRotateAngle)
{ // The document contains a shapes with vertical flip and a text frame with own // rotate angle. The shape has not stroke and no fill, so that the bounding box // surrounds the text and therefore equals approximately the text frame. // Error was, that the compensation for the 180° rotation added for vertical // flip were not made to the text box position but to the text matrix.
loadFromFile(u"tdf127785_TextRotateAngle.odp");
uno::Reference<drawing::XShape> xShape(getShape(0));
uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY);
CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeProps.is());
awt::Rectangle aBoundRect;
xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRect;
CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf128413_tbrlOnOff)
{ // The document contains a rotated shape with text. The error was, that switching // tb-rl writing-mode on, changed the shape size and position.
loadFromFile(u"tdf128413_tbrl_OnOff.odp");
uno::Reference<drawing::XShape> xShape(getShape(0));
uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY);
CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShapeProps.is());
awt::Rectangle aOrigRect;
xShapeProps->getPropertyValue(UNO_NAME_MISC_OBJ_FRAMERECT) >>= aOrigRect;
CPPUNIT_ASSERT_EQUAL_MESSAGE("Shape has wrong width", aOrigRect.Width, aObservedRect.Width);
CPPUNIT_ASSERT_EQUAL_MESSAGE("Shape has wrong height", aOrigRect.Height, aObservedRect.Height);
CPPUNIT_ASSERT_EQUAL_MESSAGE("Shape has wrong X position", aOrigRect.X, aObservedRect.X);
CPPUNIT_ASSERT_EQUAL_MESSAGE("Shape has wrong Y position", aOrigRect.Y, aObservedRect.Y);
}
CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf129532_MatrixFlipV)
{ // The document contains two rotated shapes with the same geometry. For one of them // "matrix(1 0 0 -1 0cm 0cm)" was manually added to the value of the draw:transform // attribute. That should result in mirroring on the x-axis. Error was, that the lines // which are drawn on the shape rectangle were mirrored, but not the rectangle itself. // The rectangle was only shifted.
loadFromFile(u"tdf129532_MatrixFlipV.odg");
uno::Reference<drawing::XShape> xShape0(getShape(0));
uno::Reference<beans::XPropertySet> xShape0Props(xShape0, uno::UNO_QUERY);
CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShape0Props.is());
awt::Rectangle aBoundRect0;
xShape0Props->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRect0;
uno::Reference<drawing::XShape> xShape1(getShape(1));
uno::Reference<beans::XPropertySet> xShape1Props(xShape1, uno::UNO_QUERY);
CPPUNIT_ASSERT_MESSAGE("Could not get the shape properties", xShape1Props.is());
awt::Rectangle aBoundRect1;
xShape1Props->getPropertyValue(UNO_NAME_MISC_OBJ_BOUNDRECT) >>= aBoundRect1;
// The size of the two BoundRect rectangles are the same in case of correct // vertical mirroring.
CPPUNIT_ASSERT_EQUAL_MESSAGE("Incorrect width", aBoundRect0.Width, aBoundRect1.Width);
CPPUNIT_ASSERT_EQUAL_MESSAGE("Incorrect height", aBoundRect0.Height, aBoundRect1.Height);
}
CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf103474_commandT_CaseZeroHeight)
{ // tdf103474 custom shape with command T to create quarter ellipses in a bracket, // corner case where the ellipse has zero height. // Error was, that the calculation of the circle angle from the ellipse // angle results in a wrong angle for the case 180° and height zero.
loadFromFile(u"tdf103474_commandT_CaseZeroHeight.odp");
uno::Reference<drawing::XShape> xShape(getShape(0)); // The end points of the straight line segment should have the same x-coordinate of left // of shape, and different y-coordinates, one top and the other bottom of the shape.
SdrObjCustomShape& rSdrObjCustomShape( static_cast<SdrObjCustomShape&>(*SdrObject::getSdrObjectFromXShape(xShape)));
EnhancedCustomShape2d aCustomShape2d(rSdrObjCustomShape);
rtl::Reference<SdrPathObj> pPathObj( static_cast<SdrPathObj*>(aCustomShape2d.CreateLineGeometry().get()));
CPPUNIT_ASSERT_MESSAGE("Could not convert to SdrPathObj", pPathObj); const basegfx::B2DPolyPolygon aPolyPolygon(pPathObj->GetPathPoly());
CPPUNIT_ASSERT_EQUAL_MESSAGE("count polygons", static_cast<sal_uInt32>(1),
aPolyPolygon.count()); const basegfx::B2DPolygon aPolygon(aPolyPolygon.getB2DPolygon(0)); // Get the middle points of the polygon. They are the endpoints of the // straight line segment regardless of the quarter ellipse parts, because // the shape is symmetric. const basegfx::B2DPoint aStart(aPolygon.getB2DPoint(aPolygon.count() / 2 - 1)); const basegfx::B2DPoint aEnd(aPolygon.getB2DPoint(aPolygon.count() / 2));
CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("aStart x-coordinate", 13999.0, aStart.getX(), 1.0);
CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("aEnd x-coordinate", 13999.0, aEnd.getX(), 1.0);
CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("aStart y-coordinate", 9999.0, aStart.getY(), 1.0);
CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("aEnd y-coordinate", 1999.0, aEnd.getY(), 1.0);
}
CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf103474_commandG_CaseZeroHeight)
{ // Some as above, but with shape with command G.
loadFromFile(u"tdf103474_commandG_CaseZeroHeight.odp");
uno::Reference<drawing::XShape> xShape(getShape(0)); // The end points of the straight line segment should have the same x-coordinate of left // of shape, and different y-coordinates, one top and the other bottom of the shape.
SdrObjCustomShape& rSdrObjCustomShape( static_cast<SdrObjCustomShape&>(*SdrObject::getSdrObjectFromXShape(xShape)));
EnhancedCustomShape2d aCustomShape2d(rSdrObjCustomShape);
rtl::Reference<SdrPathObj> pPathObj( static_cast<SdrPathObj*>(aCustomShape2d.CreateLineGeometry().get()));
CPPUNIT_ASSERT_MESSAGE("Could not convert to SdrPathObj", pPathObj); const basegfx::B2DPolyPolygon aPolyPolygon(pPathObj->GetPathPoly());
CPPUNIT_ASSERT_EQUAL_MESSAGE("count polygons", static_cast<sal_uInt32>(1),
aPolyPolygon.count()); const basegfx::B2DPolygon aPolygon(aPolyPolygon.getB2DPolygon(0)); // Get the middle points of the polygon. They are the endpoints of the // straight line segment regardless of the quarter ellipse parts, because // the shape is symmetric. const basegfx::B2DPoint aStart(aPolygon.getB2DPoint(aPolygon.count() / 2 - 1)); const basegfx::B2DPoint aEnd(aPolygon.getB2DPoint(aPolygon.count() / 2));
CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("aStart x-coordinate", 1999.0, aStart.getX(), 1.0);
CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("aEnd x-coordinate", 1999.0, aEnd.getX(), 1.0);
CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("aStart y-coordinate", 9999.0, aStart.getY(), 1.0);
CPPUNIT_ASSERT_DOUBLES_EQUAL_MESSAGE("aEnd y-coordinate", 1999.0, aEnd.getY(), 1.0);
}
CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf122323_largeSwingAngle)
{ // SwingAngles are clamped to [-360;360] in MS Office. Error was, that LO calculated // the end angle and used it modulo 360, no full ellipse was drawn.
loadFromFile(u"tdf122323_swingAngle_larger360deg.pptx");
uno::Reference<drawing::XShape> xShape(getShape(0));
SdrObjCustomShape& rSdrObjCustomShape( static_cast<SdrObjCustomShape&>(*SdrObject::getSdrObjectFromXShape(xShape)));
EnhancedCustomShape2d aCustomShape2d(rSdrObjCustomShape);
rtl::Reference<SdrPathObj> pPathObj( static_cast<SdrPathObj*>(aCustomShape2d.CreateLineGeometry().get()));
CPPUNIT_ASSERT_MESSAGE("Could not convert to SdrPathObj", pPathObj); const basegfx::B2DPolyPolygon aPolyPolygon(pPathObj->GetPathPoly()); const basegfx::B2DPolygon aPolygon(aPolyPolygon.getB2DPolygon(0)); const basegfx::B2DPoint aStart(aPolygon.getB2DPoint(0)); // last point comes from line to center, therefore -2 instead of -1 const basegfx::B2DPoint aEnd(aPolygon.getB2DPoint(aPolygon.count() - 2));
CPPUNIT_ASSERT_EQUAL_MESSAGE("Start <> End", aStart, aEnd);
}
// Check left/bottom of bound rect. Without fix it would be left=6722, bottom=9483.
tools::Rectangle aBoundRect(rSdrCustomShape.GetCurrentBoundRect());
CPPUNIT_ASSERT_EQUAL(tools::Long(7620), aBoundRect.Left());
CPPUNIT_ASSERT_EQUAL(tools::Long(8584), aBoundRect.Bottom());
}
CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf136176)
{ // Error was, that fObjectRotation was not correctly updated after shearing. // The problem becomes visible after save and reload.
loadFromFile(u"tdf136176_rot30_flip.odg");
for (sal_uInt16 i = 0; i < 3; i++)
{ // get shape
uno::Reference<drawing::XShape> xShape(getShape(i));
SdrObjCustomShape& rSdrObjCustomShape( static_cast<SdrObjCustomShape&>(*SdrObject::getSdrObjectFromXShape(xShape))); // apply shearing 20deg const Point aCenter = rSdrObjCustomShape.GetSnapRect().Center();
rSdrObjCustomShape.Shear(aCenter, 2000_deg100, tan(basegfx::deg2rad(20.0)), false);
}
// Save and reload
saveAndReload(u"draw8"_ustr);
// Expected values of point 4 of the shape polygon const OString sTestCase[] = { "FlipH"_ostr, "FlipV"_ostr, "FlipHV"_ostr }; constdouble fX[] = { 14981.0, 3849.0, 15214.0 }; constdouble fY[] = { 9366.0, 16464.0, 23463.0 };
// Verify correct positions for (sal_uInt16 i = 0; i < 3; i++)
{ // Get shape const uno::Reference<drawing::XShape> xShape(getShape(i)); const SdrObjCustomShape& rSdrObjCustomShape( static_cast<SdrObjCustomShape&>(*SdrObject::getSdrObjectFromXShape(xShape))); // Create polygon from shape and examine point 4 of the polygon const basegfx::B2DPolyPolygon aLineGeometry = rSdrObjCustomShape.GetLineGeometry(false); const basegfx::B2DPoint aPoint(aLineGeometry.getB2DPolygon(0).getB2DPoint(4)); // Allow some tolerance for rounding errors if (fabs(aPoint.getX() - fX[i]) > 2.0 || fabs(aPoint.getY() - fY[i]) > 2.0)
{
CPPUNIT_ASSERT_EQUAL_MESSAGE(sTestCase[i].getStr(), aPoint,
basegfx::B2DPoint(fX[i], fY[i]));
}
}
}
CPPUNIT_TEST_FIXTURE(CustomshapesTest, testTdf148501_OctagonBevel)
{ // The document contains a shape "Octagon Bevel". It should use shadings 40%, 20%, -20%, -40% // from left-top to bottom-right. The test examines actual color, not the geometry. // Load document
loadFromFile(u"tdf148501_OctagonBevel.odp");
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.
