# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id:
http://devicetree.org/schemas/iio/adc/adi,ad7779.yaml#
$schema:
http://devicetree.org/meta-schemas/core.yaml#
title: Analog Devices AD777X family 8-Channel, 24-Bit, Simultaneous Sampling ADCs
maintainers:
- Ramona Nechita <ramona.nechita@analog.com>
description: |
The AD777X family consist of 8-channel, simultaneous sampling analog-to-
digital converter (ADC). Eight full Σ-Δ ADCs are on-chip. The
AD7771 provides an ultralow input current to allow direct sensor
connection. Each input channel has a programmable gain stage
allowing gains of 1, 2, 4, and 8 to map lower amplitude sensor
outputs into the full-scale ADC input range, maximizing the
dynamic range of the signal chain.
https://www.analog.com/media/en/technical-documentation/data-sheets/ad7770.pdf
https://www.analog.com/media/en/technical-documentation/data-sheets/ad7771.pdf
https://www.analog.com/media/en/technical-documentation/data-sheets/ad7779.pdf
$ref: /schemas/spi/spi-peripheral-props.yaml#
properties:
compatible:
enum:
- adi,ad7770
- adi,ad7771
- adi,ad7779
reg:
maxItems: 1
'#address-cells':
const: 1
'#size-cells':
const: 0
clocks:
maxItems: 1
avdd1-supply:
description: Front-End analog supply AVDD1. Can be used as conversion ref.
avdd2-supply:
description: AVDD2 Analog Supply from 2.2 V to 3.6 V.
avdd4-supply:
description: AVDD4 SAR Analog Supply and Reference Source.
interrupts:
minItems: 1
items:
- description: |
adc_rdy: Interrupt line for DRDY signal which indicates the end of
conversion independently of the interface selected to read back the
Σ-∆ conversion.
- description: |
Alert: The chip includes self diagnostic features to guarantee the
correct operation. If an error is detected, the ALERT pin is pulled
high to generate an external interruption to the controller.
interrupt-names:
minItems: 1
maxItems: 2
items:
enum:
- adc_rdy
- alert
start-gpios:
description:
Pin that controls start synchronization pulse.
maxItems: 1
reset-gpios:
maxItems: 1
required:
- compatible
- reg
- clocks
- interrupts
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
spi {
#address-cells = <1>;
#size-cells = <0>;
adc@0 {
compatible = "adi,ad7779";
reg = <0>;
start-gpios = <&gpio0 87 GPIO_ACTIVE_LOW>;
reset-gpios = <&gpio0 93 GPIO_ACTIVE_LOW>;
interrupt-parent = <&intc>;
interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "adc_rdy";
clocks = <&adc_clk>;
};
};
...
