# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id:
http://devicetree.org/schemas/mfd/maxim,max77686.yaml#
$schema:
http://devicetree.org/meta-schemas/core.yaml#
title: Maxim MAX77686 Power Management IC
maintainers:
- Chanwoo Choi <cw00.choi@samsung.com>
- Krzysztof Kozlowski <krzk@kernel.org>
description: |
This is a part of device tree bindings for Maxim MAX77686 Power Management
Integrated Circuit (PMIC).
The Maxim MAX77686 is a Power Management IC which includes voltage and
current regulators, RTC and clock outputs.
The MAX77686 provides three 32.768khz clock outputs that can be controlled
(gated/ungated) over I2C. The clock IDs are defined as preprocessor macros
in dt-bindings/clock/maxim,max77686.h.
properties:
compatible:
const: maxim,max77686
'#clock-cells':
const: 1
interrupts:
maxItems: 1
reg:
maxItems: 1
voltage-regulators:
$ref: /schemas/regulator/maxim,max77686.yaml
description:
List of child nodes that specify the regulators.
wakeup-source: true
required:
- compatible
- '#clock-cells'
- reg
additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
max77686: pmic@9 {
compatible = "maxim,max77686";
reg = <0x09>;
interrupt-parent = <&gpx0>;
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
pinctrl-0 = <&max77686_irq>;
pinctrl-names = "default";
wakeup-source;
#clock-cells = <1>;
voltage-regulators {
LDO1 {
regulator-name = "VALIVE_1.0V_AP";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
LDO2 {
regulator-name = "VM1M2_1.2V_AP";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-state-mem {
regulator-on-in-suspend;
};
};
// ...
LDO22 {
regulator-name = "VMEM_VDD_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
};
// ...
BUCK1 {
regulator-name = "VDD_MIF";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
BUCK2 {
regulator-name = "VDD_ARM";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
};
};
// ...
BUCK9 {
regulator-name = "CAM_ISP_CORE_1.2V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1200000>;
maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
};
};
};
};
