# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id:
http://devicetree.org/schemas/mfd/ti,tps65086.yaml#
$schema:
http://devicetree.org/meta-schemas/core.yaml#
title: TPS65086 Power Management Integrated Circuit (PMIC)
maintainers:
- Emil Renner Berthing <kernel@esmil.dk>
properties:
compatible:
const: ti,tps65086
reg:
const: 0x5e
description: I2C slave address
interrupts:
maxItems: 1
interrupt-controller: true
'#interrupt-cells':
const: 2
description: |
The first cell is the IRQ number. The second cell is the flags,
encoded as trigger masks from ../interrupt-controller/interrupts.txt.
gpio-controller: true
'#gpio-cells':
const: 2
description: |
The first cell is the pin number and the second cell is used to specify
flags. See ../gpio/gpio.txt for more information.
regulators:
type: object
additionalProperties: false
description: |
List of child nodes that specify the regulator initialization data.
Child nodes must be named after their hardware counterparts:
buck[1-6], ldoa[1-3], swa1, swb[1-2], and vtt.
Each child node is defined using the standard binding for regulators and
the optional regulator properties defined below.
patternProperties:
"^buck[1-6]$":
type: object
$ref: /schemas/regulator/regulator.yaml
properties:
regulator-name: true
regulator-boot-on: true
regulator-always-on: true
regulator-min-microvolt: true
regulator-max-microvolt: true
ti,regulator-step-size-25mv:
type: boolean
description: |
Set this if the regulator is factory set with a 25mv step voltage
mapping.
ti,regulator-decay:
type: boolean
description: |
Set this if the output needs to decay, default is for the output
to slew down.
additionalProperties: false
"^(ldoa[1-3]|swa1|swb[1-2]|vtt)$":
type: object
$ref: /schemas/regulator/regulator.yaml
properties:
regulator-name: true
regulator-boot-on: true
regulator-always-on: true
regulator-min-microvolt: true
regulator-max-microvolt: true
additionalProperties: false
additionalProperties: false
required:
- compatible
- reg
- gpio-controller
- '#gpio-cells'
- regulators
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
pmic: pmic@5e {
compatible = "ti,tps65086";
reg = <0x5e>;
interrupt-parent = <&gpio1>;
interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
regulators {
buck1 {
regulator-name = "vcc1";
regulator-min-microvolt = <1600000>;
regulator-max-microvolt = <1600000>;
regulator-boot-on;
ti,regulator-decay;
ti,regulator-step-size-25mv;
};
};
};
};
...
