Spracherkennung für: .yaml vermutete Sprache: Unknown {[0] [0] [0]} [Methode: Schwerpunktbildung, einfache Gewichte, sechs Dimensionen]
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id:
http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
$schema:
http://devicetree.org/meta-schemas/core.yaml#
title: Legacy Qualcomm SuperSpeed DWC3 USB SoC controller
maintainers:
- Wesley Cheng <quic_wcheng@quicinc.com>
# Use the combined qcom,snps-dwc3 instead
deprecated: true
select:
properties:
compatible:
contains:
const: qcom,dwc3
required:
- compatible
properties:
compatible:
items:
- enum:
- qcom,ipq4019-dwc3
- qcom,ipq5018-dwc3
- qcom,ipq5332-dwc3
- qcom,ipq5424-dwc3
- qcom,ipq6018-dwc3
- qcom,ipq8064-dwc3
- qcom,ipq8074-dwc3
- qcom,ipq9574-dwc3
- qcom,msm8953-dwc3
- qcom,msm8994-dwc3
- qcom,msm8996-dwc3
- qcom,msm8998-dwc3
- qcom,qcm2290-dwc3
- qcom,qcs404-dwc3
- qcom,qcs615-dwc3
- qcom,qcs8300-dwc3
- qcom,qdu1000-dwc3
- qcom,sa8775p-dwc3
- qcom,sar2130p-dwc3
- qcom,sc7180-dwc3
- qcom,sc7280-dwc3
- qcom,sc8180x-dwc3
- qcom,sc8180x-dwc3-mp
- qcom,sc8280xp-dwc3
- qcom,sc8280xp-dwc3-mp
- qcom,sdm660-dwc3
- qcom,sdm670-dwc3
- qcom,sdm845-dwc3
- qcom,sdx55-dwc3
- qcom,sdx65-dwc3
- qcom,sdx75-dwc3
- qcom,sm4250-dwc3
- qcom,sm6115-dwc3
- qcom,sm6125-dwc3
- qcom,sm6350-dwc3
- qcom,sm6375-dwc3
- qcom,sm8150-dwc3
- qcom,sm8250-dwc3
- qcom,sm8350-dwc3
- qcom,sm8450-dwc3
- qcom,sm8550-dwc3
- qcom,sm8650-dwc3
- qcom,sm8750-dwc3
- qcom,x1e80100-dwc3
- qcom,x1e80100-dwc3-mp
- const: qcom,dwc3
reg:
description: Offset and length of register set for QSCRATCH wrapper
maxItems: 1
"#address-cells":
enum: [ 1, 2 ]
"#size-cells":
enum: [ 1, 2 ]
ranges: true
power-domains:
description: specifies a phandle to PM domain provider node
maxItems: 1
required-opps:
maxItems: 1
clocks:
description: |
Several clocks are used, depending on the variant. Typical ones are::
- cfg_noc:: System Config NOC clock.
- core:: Master/Core clock, has to be >= 125 MHz for SS operation and >=
60MHz for HS operation.
- iface:: System bus AXI clock.
- sleep:: Sleep clock, used for wakeup when USB3 core goes into low
power mode (U3).
- mock_utmi:: Mock utmi clock needed for ITP/SOF generation in host
mode. Its frequency should be 19.2MHz.
minItems: 1
maxItems: 9
clock-names:
minItems: 1
maxItems: 9
resets:
maxItems: 1
interconnects:
maxItems: 2
interconnect-names:
items:
- const: usb-ddr
- const: apps-usb
interrupts:
description: |
Different types of interrupts are used based on HS PHY used on target:
- pwr_event: Used for wakeup based on other power events.
- hs_phy_irq: Apart from DP/DM/QUSB2 PHY interrupts, there is
hs_phy_irq which is not triggered by default and its
functionality is mutually exclusive to that of
{dp/dm}_hs_phy_irq and qusb2_phy_irq.
- qusb2_phy: SoCs with QUSB2 PHY do not have separate DP/DM IRQs and
expose only a single IRQ whose behavior can be modified
by the QUSB2PHY_INTR_CTRL register. The required DPSE/
DMSE configuration is done in QUSB2PHY_INTR_CTRL register
of PHY address space.
- {dp/dm}_hs_phy_irq: These IRQ's directly reflect changes on the DP/
DM pads of the SoC. These are used for wakeup
only on SoCs with non-QUSB2 targets with
exception of SDM670/SDM845/SM6350.
- ss_phy_irq: Used for remote wakeup in Super Speed mode of operation.
minItems: 2
maxItems: 18
interrupt-names:
minItems: 2
maxItems: 18
qcom,select-utmi-as-pipe-clk:
description:
If present, disable USB3 pipe_clk requirement.
Used when dwc3 operates without SSPHY and only
HS/FS/LS modes are supported.
type: boolean
wakeup-source: true
# Required child node:
patternProperties:
"^usb@[0-9a-f]+$":
$ref: snps,dwc3.yaml#
unevaluatedProperties: false
properties:
wakeup-source: false
required:
- compatible
- reg
- "#address-cells"
- "#size-cells"
- ranges
- clocks
- clock-names
- interrupts
- interrupt-names
allOf:
- if:
properties:
compatible:
contains:
enum:
- qcom,ipq4019-dwc3
- qcom,ipq5332-dwc3
then:
properties:
clocks:
maxItems: 3
clock-names:
items:
- const: core
- const: sleep
- const: mock_utmi
- if:
properties:
compatible:
contains:
enum:
- qcom,ipq8064-dwc3
then:
properties:
clocks:
items:
- description: Master/Core clock, has to be >= 125 MHz
for SS operation and >= 60MHz for HS operation.
clock-names:
items:
- const: core
- if:
properties:
compatible:
contains:
enum:
- qcom,ipq9574-dwc3
- qcom,msm8953-dwc3
- qcom,msm8996-dwc3
- qcom,msm8998-dwc3
- qcom,qcs8300-dwc3
- qcom,sa8775p-dwc3
- qcom,sc7180-dwc3
- qcom,sc7280-dwc3
- qcom,sdm670-dwc3
- qcom,sdm845-dwc3
- qcom,sdx55-dwc3
- qcom,sdx65-dwc3
- qcom,sdx75-dwc3
- qcom,sm6350-dwc3
then:
properties:
clocks:
maxItems: 5
clock-names:
items:
- const: cfg_noc
- const: core
- const: iface
- const: sleep
- const: mock_utmi
- if:
properties:
compatible:
contains:
enum:
- qcom,ipq6018-dwc3
then:
properties:
clocks:
minItems: 3
maxItems: 4
clock-names:
oneOf:
- items:
- const: core
- const: sleep
- const: mock_utmi
- items:
- const: cfg_noc
- const: core
- const: sleep
- const: mock_utmi
- if:
properties:
compatible:
contains:
enum:
- qcom,ipq8074-dwc3
- qcom,qdu1000-dwc3
then:
properties:
clocks:
maxItems: 4
clock-names:
items:
- const: cfg_noc
- const: core
- const: sleep
- const: mock_utmi
- if:
properties:
compatible:
contains:
enum:
- qcom,ipq5018-dwc3
- qcom,msm8994-dwc3
- qcom,qcs404-dwc3
then:
properties:
clocks:
maxItems: 4
clock-names:
items:
- const: core
- const: iface
- const: sleep
- const: mock_utmi
- if:
properties:
compatible:
contains:
enum:
- qcom,sc8280xp-dwc3
- qcom,sc8280xp-dwc3-mp
- qcom,x1e80100-dwc3
- qcom,x1e80100-dwc3-mp
then:
properties:
clocks:
maxItems: 9
clock-names:
items:
- const: cfg_noc
- const: core
- const: iface
- const: sleep
- const: mock_utmi
- const: noc_aggr
- const: noc_aggr_north
- const: noc_aggr_south
- const: noc_sys
- if:
properties:
compatible:
contains:
enum:
- qcom,sdm660-dwc3
then:
properties:
clocks:
minItems: 4
maxItems: 5
clock-names:
oneOf:
- items:
- const: cfg_noc
- const: core
- const: iface
- const: sleep
- const: mock_utmi
- items:
- const: cfg_noc
- const: core
- const: sleep
- const: mock_utmi
- if:
properties:
compatible:
contains:
enum:
- qcom,qcm2290-dwc3
- qcom,qcs615-dwc3
- qcom,sar2130p-dwc3
- qcom,sc8180x-dwc3
- qcom,sc8180x-dwc3-mp
- qcom,sm6115-dwc3
- qcom,sm6125-dwc3
- qcom,sm8150-dwc3
- qcom,sm8250-dwc3
- qcom,sm8450-dwc3
- qcom,sm8550-dwc3
- qcom,sm8650-dwc3
- qcom,sm8750-dwc3
then:
properties:
clocks:
minItems: 6
clock-names:
items:
- const: cfg_noc
- const: core
- const: iface
- const: sleep
- const: mock_utmi
- const: xo
- if:
properties:
compatible:
contains:
enum:
- qcom,sm8350-dwc3
then:
properties:
clocks:
minItems: 5
maxItems: 6
clock-names:
minItems: 5
items:
- const: cfg_noc
- const: core
- const: iface
- const: sleep
- const: mock_utmi
- const: xo
- if:
properties:
compatible:
contains:
enum:
- qcom,ipq5018-dwc3
- qcom,ipq6018-dwc3
- qcom,ipq8074-dwc3
- qcom,msm8953-dwc3
- qcom,msm8998-dwc3
then:
properties:
interrupts:
minItems: 2
maxItems: 3
interrupt-names:
minItems: 2
items:
- const: pwr_event
- const: qusb2_phy
- const: ss_phy_irq
- if:
properties:
compatible:
contains:
enum:
- qcom,msm8996-dwc3
- qcom,qcs404-dwc3
- qcom,sdm660-dwc3
- qcom,sm6115-dwc3
- qcom,sm6125-dwc3
then:
properties:
interrupts:
minItems: 3
maxItems: 4
interrupt-names:
minItems: 3
items:
- const: pwr_event
- const: qusb2_phy
- const: hs_phy_irq
- const: ss_phy_irq
- if:
properties:
compatible:
contains:
enum:
- qcom,ipq5332-dwc3
then:
properties:
interrupts:
maxItems: 3
interrupt-names:
items:
- const: pwr_event
- const: dp_hs_phy_irq
- const: dm_hs_phy_irq
- if:
properties:
compatible:
contains:
enum:
- qcom,x1e80100-dwc3
then:
properties:
interrupts:
minItems: 3
maxItems: 4
interrupt-names:
minItems: 3
items:
- const: pwr_event
- const: dp_hs_phy_irq
- const: dm_hs_phy_irq
- const: ss_phy_irq
- if:
properties:
compatible:
contains:
enum:
- qcom,ipq4019-dwc3
- qcom,ipq8064-dwc3
- qcom,msm8994-dwc3
- qcom,qcs615-dwc3
- qcom,qcs8300-dwc3
- qcom,qdu1000-dwc3
- qcom,sa8775p-dwc3
- qcom,sc7180-dwc3
- qcom,sc7280-dwc3
- qcom,sc8180x-dwc3
- qcom,sc8280xp-dwc3
- qcom,sdm670-dwc3
- qcom,sdm845-dwc3
- qcom,sdx55-dwc3
- qcom,sdx65-dwc3
- qcom,sdx75-dwc3
- qcom,sm4250-dwc3
- qcom,sm6350-dwc3
- qcom,sm8150-dwc3
- qcom,sm8250-dwc3
- qcom,sm8350-dwc3
- qcom,sm8450-dwc3
- qcom,sm8550-dwc3
- qcom,sm8650-dwc3
- qcom,sm8750-dwc3
then:
properties:
interrupts:
minItems: 4
maxItems: 5
interrupt-names:
minItems: 4
items:
- const: pwr_event
- const: hs_phy_irq
- const: dp_hs_phy_irq
- const: dm_hs_phy_irq
- const: ss_phy_irq
- if:
properties:
compatible:
contains:
enum:
- qcom,sc8180x-dwc3-mp
- qcom,x1e80100-dwc3-mp
then:
properties:
interrupts:
minItems: 10
maxItems: 10
interrupt-names:
items:
- const: pwr_event_1
- const: pwr_event_2
- const: hs_phy_1
- const: hs_phy_2
- const: dp_hs_phy_1
- const: dm_hs_phy_1
- const: dp_hs_phy_2
- const: dm_hs_phy_2
- const: ss_phy_1
- const: ss_phy_2
- if:
properties:
compatible:
contains:
enum:
- qcom,sc8280xp-dwc3-mp
then:
properties:
interrupts:
minItems: 18
maxItems: 18
interrupt-names:
items:
- const: pwr_event_1
- const: pwr_event_2
- const: pwr_event_3
- const: pwr_event_4
- const: hs_phy_1
- const: hs_phy_2
- const: hs_phy_3
- const: hs_phy_4
- const: dp_hs_phy_1
- const: dm_hs_phy_1
- const: dp_hs_phy_2
- const: dm_hs_phy_2
- const: dp_hs_phy_3
- const: dm_hs_phy_3
- const: dp_hs_phy_4
- const: dm_hs_phy_4
- const: ss_phy_1
- const: ss_phy_2
additionalProperties: false
examples:
- |
#include <dt-bindings/clock/qcom,gcc-sdm845.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
soc {
#address-cells = <2>;
#size-cells = <2>;
usb@a6f8800 {
compatible = "qcom,sdm845-dwc3", "qcom,dwc3";
reg = <0 0x0a6f8800 0 0x400>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
<&gcc GCC_USB30_PRIM_MASTER_CLK>,
<&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
<&gcc GCC_USB30_PRIM_SLEEP_CLK>,
<&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
clock-names = "cfg_noc",
"core",
"iface",
"sleep",
"mock_utmi";
assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
<&gcc GCC_USB30_PRIM_MASTER_CLK>;
assigned-clock-rates = <19200000>, <150000000>;
interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 489 IRQ_TYPE_EDGE_BOTH>,
<GIC_SPI 488 IRQ_TYPE_EDGE_BOTH>,
<GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "pwr_event", "hs_phy_irq",
"dp_hs_phy_irq", "dm_hs_phy_irq", "ss_phy_irq";
power-domains = <&gcc USB30_PRIM_GDSC>;
resets = <&gcc GCC_USB30_PRIM_BCR>;
usb@a600000 {
compatible = "snps,dwc3";
reg = <0 0x0a600000 0 0xcd00>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&apps_smmu 0x740 0>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
phy-names = "usb2-phy", "usb3-phy";
};
};
};
