Anforderungen  |   Konzepte  |   Entwurf  |   Entwicklung  |   Qualitätssicherung  |   Lebenszyklus  |   Steuerung
 
 
 
 


Quelle  tegra124-apalis-v1.2-eval.dts   Sprache: unbekannt

 
// SPDX-License-Identifier: GPL-2.0 OR MIT
/*
 * Copyright 2016-2018 Toradex AG
 */

/dts-v1/;

#include <dt-bindings/input/input.h>
#include "tegra124-apalis-v1.2.dtsi"

/ {
 model = "Toradex Apalis TK1 on Apalis Evaluation Board";
 compatible = "toradex,apalis-tk1-v1.2-eval", "toradex,apalis-tk1-eval",
       "toradex,apalis-tk1-v1.2", "toradex,apalis-tk1",
       "nvidia,tegra124";

 aliases {
  rtc0 = "/i2c@7000c000/rtc@68";
  rtc1 = "/i2c@7000d000/pmic@40";
  rtc2 = "/rtc@7000e000";
  serial0 = &uarta;
  serial1 = &uartb;
  serial2 = &uartc;
  serial3 = &uartd;
 };

 chosen {
  stdout-path = "serial0:115200n8";
 };

 pcie@1003000 {
  pci@1,0 {
   status = "okay";
  };
 };

 host1x@50000000 {
  hdmi@54280000 {
   status = "okay";
   hdmi-supply = <®_5v0>;
  };
 };

 gpio@6000d000 {
  /* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
  pex-perst-n-hog {
   gpio-hog;
   gpios = <TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
   output-high;
   line-name = "PEX_PERST_N";
  };
 };

 /* Apalis UART1 */
 serial@70006000 {
  /delete-property/ dmas;
  /delete-property/ dma-names;
  status = "okay";
 };

 /* Apalis UART2 */
 serial@70006040 {
  status = "okay";
 };

 /* Apalis UART3 */
 serial@70006200 {
  status = "okay";
 };

 /* Apalis UART4 */
 serial@70006300 {
  status = "okay";
 };

 pwm@7000a000 {
  status = "okay";
 };

 /*
  * GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier
  * board)
  */
 i2c@7000c000 {
  status = "okay";
  clock-frequency = <400000>;

  /* M41T0M6 real time clock on carrier board */
  rtc@68 {
   compatible = "st,m41t0";
   reg = <0x68>;
  };
 };

 /* GEN2_I2C: unused */

 /*
  * CAM_I2C: I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor
  * on carrier board)
  */
 i2c@7000c500 {
  status = "okay";
  clock-frequency = <400000>;
 };

 /*
  * I2C4 (DDC): I2C4_SDA/SCL (DDC) on MXM3 pin 205/207
  * (e.g. display EDID)
  */
 i2c@7000c700 {
  status = "okay";
 };

 /* SPI1: Apalis SPI1 */
 spi@7000d400 {
  status = "okay";
  spi-max-frequency = <50000000>;
 };

 /* SPI4: Apalis SPI2 */
 spi@7000da00 {
  status = "okay";
  spi-max-frequency = <50000000>;
 };

 /* Apalis Serial ATA */
 sata@70020000 {
  status = "okay";
  target-5v-supply = <®_5v0>;
  target-12v-supply = <®_12v0>;
 };

 hda@70030000 {
  status = "okay";
 };

 usb@70090000 {
  status = "okay";
 };

 /* Apalis MMC1 */
 mmc@700b0000 {
  status = "okay";
  bus-width = <4>;
  /* MMC1_CD# */
  cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
  vqmmc-supply = <&vddio_sdmmc1>;
 };

 /* Apalis SD1 */
 mmc@700b0400 {
  status = "okay";
  bus-width = <4>;
  /* SD1_CD# */
  cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
  vqmmc-supply = <&vddio_sdmmc3>;
 };

 /* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */
 usb@7d000000 {
  status = "okay";
  dr_mode = "otg";
 };

 usb-phy@7d000000 {
  status = "okay";
  vbus-supply = <®_usbo1_vbus>;
 };

 /* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */
 usb@7d004000 {
  status = "okay";
 };

 usb-phy@7d004000 {
  status = "okay";
  vbus-supply = <®_usbh_vbus>;
 };

 /* EHCI instance 2: USB3_DP/N -> USBH4_DP/N */
 usb@7d008000 {
  status = "okay";
 };

 usb-phy@7d008000 {
  status = "okay";
  vbus-supply = <®_usbh_vbus>;
 };

 backlight: backlight {
  compatible = "pwm-backlight";
  brightness-levels = <255 231 223 207 191 159 127 0>;
  default-brightness-level = <6>;
  /* BKL1_ON */
  enable-gpios = <&gpio TEGRA_GPIO(BB, 5) GPIO_ACTIVE_HIGH>;
  power-supply = <®_3v3>;
  pwms = <&pwm 3 5000000>; /* BKL1_PWM */
 };

 gpio-keys {
  compatible = "gpio-keys";

  key-wakeup {
   label = "WAKE1_MICO";
   gpios = <&gpio TEGRA_GPIO(DD, 3) GPIO_ACTIVE_LOW>;
   linux,code = <KEY_WAKEUP>;
   debounce-interval = <10>;
   wakeup-source;
  };
 };

 reg_3v3: regulator-3v3 {
  compatible = "regulator-fixed";
  regulator-name = "3.3V_SW";
  regulator-min-microvolt = <3300000>;
  regulator-max-microvolt = <3300000>;
 };

 reg_5v0: regulator-5v0 {
  compatible = "regulator-fixed";
  regulator-name = "5V_SW";
  regulator-min-microvolt = <5000000>;
  regulator-max-microvolt = <5000000>;
 };

 reg_12v0: regulator-12v0 {
  compatible = "regulator-fixed";
  regulator-name = "12V_SW";
  regulator-min-microvolt = <12000000>;
  regulator-max-microvolt = <12000000>;
 };

 /* USBO1_EN */
 reg_usbo1_vbus: regulator-usbo1-vbus {
  compatible = "regulator-fixed";
  regulator-name = "VCC_USBO1";
  regulator-min-microvolt = <5000000>;
  regulator-max-microvolt = <5000000>;
  gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
  enable-active-high;
  vin-supply = <®_5v0>;
 };

 /* USBH_EN */
 reg_usbh_vbus: regulator-usbh-vbus {
  compatible = "regulator-fixed";
  regulator-name = "VCC_USBH(2A|2C|2D|3|4)";
  regulator-min-microvolt = <5000000>;
  regulator-max-microvolt = <5000000>;
  gpio = <&gpio TEGRA_GPIO(T, 6) GPIO_ACTIVE_HIGH>;
  enable-active-high;
  vin-supply = <®_5v0>;
 };
};

[ Dauer der Verarbeitung: 0.11 Sekunden  (vorverarbeitet)  ]

                                                                                                                                                                                                                                                                                                                                                                                                     


Neuigkeiten

     Aktuelles
     Motto des Tages

Software

     Produkte
     Quellcodebibliothek

Aktivitäten

     Artikel über Sicherheit
     Anleitung zur Aktivierung von SSL

Muße

     Gedichte
     Musik
     Bilder

Jenseits des Üblichen ....

Besucherstatistik

Besucherstatistik

Monitoring

Montastic status badge