Anforderungen  |   Konzepte  |   Entwurf  |   Entwicklung  |   Qualitätssicherung  |   Lebenszyklus  |   Steuerung
 
 
 
 


Quelle  dra7-evm-common.dtsi   Sprache: unbekannt

 
// SPDX-License-Identifier: GPL-2.0-only
/*
 * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
 */

#include "dra74-ipu-dsp-common.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clock/ti-dra7-atl.h>
#include <dt-bindings/input/input.h>

/ {
 chosen {
  stdout-path = &uart1;
 };

 extcon_usb1: extcon_usb1 {
  compatible = "linux,extcon-usb-gpio";
  id-gpios = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
 };

 extcon_usb2: extcon_usb2 {
  compatible = "linux,extcon-usb-gpio";
  id-gpios = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
 };

 sound0: sound0 {
  compatible = "simple-audio-card";
  simple-audio-card,name = "DRA7xx-EVM";
  simple-audio-card,widgets =
   "Headphone", "Headphone Jack",
   "Line", "Line Out",
   "Microphone", "Mic Jack",
   "Line", "Line In";
  simple-audio-card,routing =
   "Headphone Jack", "HPLOUT",
   "Headphone Jack", "HPROUT",
   "Line Out",  "LLOUT",
   "Line Out",  "RLOUT",
   "MIC3L",  "Mic Jack",
   "MIC3R",  "Mic Jack",
   "Mic Jack",  "Mic Bias",
   "LINE1L",  "Line In",
   "LINE1R",  "Line In";
  simple-audio-card,format = "dsp_b";
  simple-audio-card,bitclock-master = <&sound0_master>;
  simple-audio-card,frame-master = <&sound0_master>;
  simple-audio-card,bitclock-inversion;

  sound0_master: simple-audio-card,cpu {
   sound-dai = <&mcasp3>;
   system-clock-frequency = <5644800>;
  };

  simple-audio-card,codec {
   sound-dai = <&tlv320aic3106>;
   clocks = <&atl_clkin2_ck>;
  };
 };

 leds {
  compatible = "gpio-leds";
  led0 {
   label = "dra7:usr1";
   gpios = <&pcf_lcd 4 GPIO_ACTIVE_LOW>;
   default-state = "off";
  };

  led1 {
   label = "dra7:usr2";
   gpios = <&pcf_lcd 5 GPIO_ACTIVE_LOW>;
   default-state = "off";
  };

  led2 {
   label = "dra7:usr3";
   gpios = <&pcf_lcd 6 GPIO_ACTIVE_LOW>;
   default-state = "off";
  };

  led3 {
   label = "dra7:usr4";
   gpios = <&pcf_lcd 7 GPIO_ACTIVE_LOW>;
   default-state = "off";
  };
 };

 gpio_keys {
  compatible = "gpio-keys";
  #address-cells = <1>;
  #size-cells = <0>;
  autorepeat;

  USER1 {
   label = "btnUser1";
   linux,code = <BTN_0>;
   gpios = <&pcf_lcd 2 GPIO_ACTIVE_LOW>;
  };

  USER2 {
   label = "btnUser2";
   linux,code = <BTN_1>;
   gpios = <&pcf_lcd 3 GPIO_ACTIVE_LOW>;
  };
 };
};

&i2c3 {
 status = "okay";
 clock-frequency = <400000>;
};

&mcspi1 {
 status = "okay";
};

&mcspi2 {
 status = "okay";
};

&uart1 {
 status = "okay";
 interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
         <&dra7_pmx_core 0x3e0>;
};

&uart2 {
 status = "okay";
};

&uart3 {
 status = "okay";
};

&qspi {
 status = "okay";

 spi-max-frequency = <76800000>;
 flash@0 {
  compatible = "s25fl256s1";
  spi-max-frequency = <76800000>;
  reg = <0>;
  spi-tx-bus-width = <1>;
  spi-rx-bus-width = <4>;
  #address-cells = <1>;
  #size-cells = <1>;

  /* MTD partition table.
   * The ROM checks the first four physical blocks
   * for a valid file to boot and the flash here is
   * 64KiB block size.
   */
  partition@0 {
   label = "QSPI.SPL";
   reg = <0x00000000 0x00010000>;
  };
  partition@1 {
   label = "QSPI.SPL.backup1";
   reg = <0x00010000 0x00010000>;
  };
  partition@2 {
   label = "QSPI.SPL.backup2";
   reg = <0x00020000 0x00010000>;
  };
  partition@3 {
   label = "QSPI.SPL.backup3";
   reg = <0x00030000 0x00010000>;
  };
  partition@4 {
   label = "QSPI.u-boot";
   reg = <0x00040000 0x00100000>;
  };
  partition@5 {
   label = "QSPI.u-boot-spl-os";
   reg = <0x00140000 0x00080000>;
  };
  partition@6 {
   label = "QSPI.u-boot-env";
   reg = <0x001c0000 0x00010000>;
  };
  partition@7 {
   label = "QSPI.u-boot-env.backup1";
   reg = <0x001d0000 0x0010000>;
  };
  partition@8 {
   label = "QSPI.kernel";
   reg = <0x001e0000 0x0800000>;
  };
  partition@9 {
   label = "QSPI.file-system";
   reg = <0x009e0000 0x01620000>;
  };
 };
};

&omap_dwc3_1 {
 extcon = <&extcon_usb1>;
};

&usb1 {
 dr_mode = "otg";
 extcon = <&extcon_usb1>;
};

&omap_dwc3_2 {
 extcon = <&extcon_usb2>;
};

&usb2 {
 dr_mode = "host";
 extcon = <&extcon_usb2>;
};

&atl {
 assigned-clocks = <&abe_dpll_sys_clk_mux>,
     <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>,
     <&dpll_abe_ck>,
     <&dpll_abe_m2x2_ck>,
     <&atl_clkin2_ck>;
 assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;
 assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;

 status = "okay";

 atl2 {
  bws = <DRA7_ATL_WS_MCASP2_FSX>;
  aws = <DRA7_ATL_WS_MCASP3_FSX>;
 };
};

&mcasp3 {
 #sound-dai-cells = <0>;

 assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
 assigned-clock-parents = <&atl_clkin2_ck>;

 status = "okay";

 op-mode = <0>;          /* MCASP_IIS_MODE */
 tdm-slots = <2>;
 /* 4 serializer */
 serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
  1 2 0 0
 >;
 tx-num-evt = <32>;
 rx-num-evt = <32>;
};

&pcie1_rc {
 status = "okay";
};

&mmc4 {
 bus-width = <4>;
 cap-power-off-card;
 keep-power-in-suspend;
 non-removable;
 #address-cells = <1>;
 #size-cells = <0>;
 wifi@2 {
  compatible = "ti,wl1835";
  reg = <2>;
  interrupt-parent = <&gpio5>;
  interrupts = <7 IRQ_TYPE_EDGE_RISING>;
 };
};

[ Dauer der Verarbeitung: 0.3 Sekunden  (vorverarbeitet)  ]

                                                                                                                                                                                                                                                                                                                                                                                                     


Neuigkeiten

     Aktuelles
     Motto des Tages

Software

     Produkte
     Quellcodebibliothek

Aktivitäten

     Artikel über Sicherheit
     Anleitung zur Aktivierung von SSL

Muße

     Gedichte
     Musik
     Bilder

Jenseits des Üblichen ....
    

Besucherstatistik

Besucherstatistik

Monitoring

Montastic status badge