Anforderungen  |   Konzepte  |   Entwurf  |   Entwicklung  |   Qualitätssicherung  |   Lebenszyklus  |   Steuerung
 
 
 
 


Quelle  omap3-igep0030-rev-g.dts   Sprache: unbekannt

 
// SPDX-License-Identifier: GPL-2.0-only
/*
 * Device Tree Source for IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)
 *
 * Copyright (C) 2014 Javier Martinez Canillas <javier@dowhile0.org>
 * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
 */

#include "omap3-igep0030-common.dtsi"

/ {
 model = "IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)";
 compatible = "isee,omap3-igep0030-rev-g", "ti,omap3630", "ti,omap3";

 /* Regulator to trigger the WL_EN signal of the Wifi module */
 lbep5clwmc_wlen: regulator-lbep5clwmc-wlen {
  compatible = "regulator-fixed";
  regulator-name = "regulator-lbep5clwmc-wlen";
  regulator-min-microvolt = <3300000>;
  regulator-max-microvolt = <3300000>;
  gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>;  /* gpio_139 - WL_EN */
  enable-active-high;
 };
};

&omap3_pmx_core {
 lbep5clwmc_pins: lbep5clwmc-pins {
  pinctrl-single,pins = <
   OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE4) /* sdmmc2_dat4.gpio_136 - W_IRQ */
   OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 - BT_EN */
   OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 - WL_EN */
  >;
 };

 leds_pins: leds-pins {
  pinctrl-single,pins = <
   OMAP3_CORE1_IOPAD(0x21be, PIN_OUTPUT | MUX_MODE4) /* i2c2_scl.gpio_168 */
  >;
 };

};

&i2c2 {
 status = "disabled";
};

&leds {
 pinctrl-names = "default";
 pinctrl-0 = <&leds_pins &leds_core2_pins>;

 boot {
  label = "omap3:green:boot";
  gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
  default-state = "on";
 };
};

&mmc2 {
 pinctrl-names = "default";
 pinctrl-0 = <&mmc2_pins &lbep5clwmc_pins>;
 vmmc-supply = <&lbep5clwmc_wlen>;
 bus-width = <4>;
 non-removable;

 #address-cells = <1>;
 #size-cells = <0>;
 wlcore: wlcore@2 {
  compatible = "ti,wl1835";
  reg = <2>;
  interrupt-parent = <&gpio5>;
  interrupts = <8 IRQ_TYPE_EDGE_RISING>; /* gpio 136 */
 };
};

&uart2 {
 bluetooth {
  compatible = "ti,wl1835-st";
  enable-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; /* gpio 137 */
  max-speed = <300000>;
 };
};

[ Dauer der Verarbeitung: 0.3 Sekunden  (vorverarbeitet)  ]

                                                                                                                                                                                                                                                                                                                                                                                                     


Neuigkeiten

     Aktuelles
     Motto des Tages

Software

     Produkte
     Quellcodebibliothek

Aktivitäten

     Artikel über Sicherheit
     Anleitung zur Aktivierung von SSL

Muße

     Gedichte
     Musik
     Bilder

Jenseits des Üblichen ....
    

Besucherstatistik

Besucherstatistik

Monitoring

Montastic status badge