// SPDX-License-Identifier: GPL-2.0+ OR MIT
/*
* Devices used on die 0 on the Apple T6002 "M1 Ultra" SoC and present on
* Apple T6000 / T6001 "M1 Pro" / "M1 Max".
*
* Copyright The Asahi Linux Contributors
*/
nco: clock-controller@28e03c000 {
compatible = "apple,t6000-nco", "apple,nco";
reg = <0x2 0x8e03c000 0x0 0x14000>;
clocks = <&nco_clkref>;
#clock-cells = <1>;
};
aic: interrupt-controller@28e100000 {
compatible = "apple,t6000-aic", "apple,aic2";
#interrupt-cells = <4>;
interrupt-controller;
reg = <0x2 0x8e100000 0x0 0xc000>,
<0x2 0x8e10c000 0x0 0x4>;
reg-names = "core", "event";
power-domains = <&ps_aic>;
};
pinctrl_smc: pinctrl@290820000 {
compatible = "apple,t6000-pinctrl", "apple,pinctrl";
reg = <0x2 0x90820000 0x0 0x4000>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinctrl_smc 0 0 30>;
apple,npins = <30>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&aic>;
interrupts = <AIC_IRQ 0 743 IRQ_TYPE_LEVEL_HIGH>,
<AIC_IRQ 0 744 IRQ_TYPE_LEVEL_HIGH>,
<AIC_IRQ 0 745 IRQ_TYPE_LEVEL_HIGH>,
<AIC_IRQ 0 746 IRQ_TYPE_LEVEL_HIGH>,
<AIC_IRQ 0 747 IRQ_TYPE_LEVEL_HIGH>,
<AIC_IRQ 0 748 IRQ_TYPE_LEVEL_HIGH>,
<AIC_IRQ 0 749 IRQ_TYPE_LEVEL_HIGH>;
};
nub_spmi0: spmi@2920a1300 {
compatible = "apple,t6000-spmi", "apple,spmi";
reg = <0x2 0x920a1300 0x0 0x100>;
#address-cells = <2>;
#size-cells = <0>;
pmic1: pmic@f {
compatible = "apple,maverick-pmic", "apple,spmi-nvmem";
reg = <0xf SPMI_USID>;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
pm_setting: pm-setting@1405 {
reg = <0x1405 0x1>;
};
rtc_offset: rtc-offset@1411 {
reg = <0x1411 0x6>;
};
boot_stage: boot-stage@6001 {
reg = <0x6001 0x1>;
};
boot_error_count: boot-error-count@6002,0 {
reg = <0x6002 0x1>;
bits = <0 4>;
};
panic_count: panic-count@6002,4 {
reg = <0x6002 0x1>;
bits = <4 4>;
};
boot_error_stage: boot-error-stage@6003 {
reg = <0x6003 0x1>;
};
shutdown_flag: shutdown-flag@600f,3 {
reg = <0x600f 0x1>;
bits = <3 1>;
};
fault_shadow: fault-shadow@867b {
reg = <0x867b 0x10>;
};
socd: socd@8b00 {
reg = <0x8b00 0x400>;
};
};
};
};
wdt: watchdog@2922b0000 {
compatible = "apple,t6000-wdt", "apple,wdt";
reg = <0x2 0x922b0000 0x0 0x4000>;
clocks = <&clkref>;
interrupt-parent = <&aic>;
interrupts = <AIC_IRQ 0 631 IRQ_TYPE_LEVEL_HIGH>;
};
sio_dart_0: iommu@39b004000 {
compatible = "apple,t6000-dart";
reg = <0x3 0x9b004000 0x0 0x4000>;
interrupt-parent = <&aic>;
interrupts = <AIC_IRQ 0 1130 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
power-domains = <&ps_sio_cpu>;
};
sio_dart_1: iommu@39b008000 {
compatible = "apple,t6000-dart";
reg = <0x3 0x9b008000 0x0 0x8000>;
interrupt-parent = <&aic>;
interrupts = <AIC_IRQ 0 1130 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
power-domains = <&ps_sio_cpu>;
};
fpwm0: pwm@39b030000 {
compatible = "apple,t6000-fpwm", "apple,s5l-fpwm";
reg = <0x3 0x9b030000 0x0 0x4000>;
power-domains = <&ps_fpwm0>;
clocks = <&clkref>;
#pwm-cells = <2>;
status = "disabled";
};
i2c0: i2c@39b040000 {
compatible = "apple,t6000-i2c", "apple,i2c";
reg = <0x3 0x9b040000 0x0 0x4000>;
clocks = <&clkref>;
interrupt-parent = <&aic>;
interrupts = <AIC_IRQ 0 1119 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-0 = <&i2c0_pins>;
pinctrl-names = "default";
power-domains = <&ps_i2c0>;
#address-cells = <0x1>;
#size-cells = <0x0>;
};
i2c1: i2c@39b044000 {
compatible = "apple,t6000-i2c", "apple,i2c";
reg = <0x3 0x9b044000 0x0 0x4000>;
clocks = <&clkref>;
interrupt-parent = <&aic>;
interrupts = <AIC_IRQ 0 1120 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-0 = <&i2c1_pins>;
pinctrl-names = "default";
power-domains = <&ps_i2c1>;
#address-cells = <0x1>;
#size-cells = <0x0>;
status = "disabled";
};
i2c2: i2c@39b048000 {
compatible = "apple,t6000-i2c", "apple,i2c";
reg = <0x3 0x9b048000 0x0 0x4000>;
clocks = <&clkref>;
interrupt-parent = <&aic>;
interrupts = <AIC_IRQ 0 1121 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-0 = <&i2c2_pins>;
pinctrl-names = "default";
power-domains = <&ps_i2c2>;
#address-cells = <0x1>;
#size-cells = <0x0>;
status = "disabled";
};
i2c3: i2c@39b04c000 {
compatible = "apple,t6000-i2c", "apple,i2c";
reg = <0x3 0x9b04c000 0x0 0x4000>;
clocks = <&clkref>;
interrupt-parent = <&aic>;
interrupts = <AIC_IRQ 0 1122 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-0 = <&i2c3_pins>;
pinctrl-names = "default";
power-domains = <&ps_i2c3>;
#address-cells = <0x1>;
#size-cells = <0x0>;
status = "disabled";
};
i2c4: i2c@39b050000 {
compatible = "apple,t6000-i2c", "apple,i2c";
reg = <0x3 0x9b050000 0x0 0x4000>;
clocks = <&clkref>;
interrupt-parent = <&aic>;
interrupts = <AIC_IRQ 0 1123 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-0 = <&i2c4_pins>;
pinctrl-names = "default";
power-domains = <&ps_i2c4>;
#address-cells = <0x1>;
#size-cells = <0x0>;
status = "disabled";
};
i2c5: i2c@39b054000 {
compatible = "apple,t6000-i2c", "apple,i2c";
reg = <0x3 0x9b054000 0x0 0x4000>;
clocks = <&clkref>;
interrupt-parent = <&aic>;
interrupts = <AIC_IRQ 0 1124 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-0 = <&i2c5_pins>;
pinctrl-names = "default";
power-domains = <&ps_i2c5>;
#address-cells = <0x1>;
#size-cells = <0x0>;
status = "disabled";
};
spi1: spi@39b104000 {
compatible = "apple,t6000-spi", "apple,spi";
reg = <0x3 0x9b104000 0x0 0x4000>;
interrupt-parent = <&aic>;
interrupts = <AIC_IRQ 0 1107 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clk_200m>;
pinctrl-0 = <&spi1_pins>;
pinctrl-names = "default";
power-domains = <&ps_spi1>;
status = "disabled";
};
spi3: spi@39b10c000 {
compatible = "apple,t6000-spi", "apple,spi";
reg = <0x3 0x9b10c000 0x0 0x4000>;
interrupt-parent = <&aic>;
interrupts = <AIC_IRQ 0 1109 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clkref>;
pinctrl-0 = <&spi3_pins>;
pinctrl-names = "default";
power-domains = <&ps_spi3>;
status = "disabled";
};
serial0: serial@39b200000 {
compatible = "apple,s5l-uart";
reg = <0x3 0x9b200000 0x0 0x1000>;
reg-io-width = <4>;
interrupt-parent = <&aic>;
interrupts = <AIC_IRQ 0 1097 IRQ_TYPE_LEVEL_HIGH>;
/*
* TODO: figure out the clocking properly, there may
* be a third selectable clock.
*/
clocks = <&clkref>, <&clkref>;
clock-names = "uart", "clk_uart_baud0";
power-domains = <&ps_uart0>;
status = "disabled";
};
admac: dma-controller@39b400000 {
compatible = "apple,t6000-admac", "apple,admac";
reg = <0x3 0x9b400000 0x0 0x34000>;
#dma-cells = <1>;
dma-channels = <16>;
interrupts-extended = <0>,
<&aic AIC_IRQ 0 1118 IRQ_TYPE_LEVEL_HIGH>,
<0>,
<0>;
iommus = <&sio_dart_0 2>, <&sio_dart_1 2>;
power-domains = <&ps_sio_adma>;
resets = <&ps_audio_p>;
};
mca: mca@39b600000 {
compatible = "apple,t6000-mca", "apple,mca";
reg = <0x3 0x9b600000 0x0 0x10000>,
<0x3 0x9b500000 0x0 0x20000>;
clocks = <&nco 0>, <&nco 1>, <&nco 2>, <&nco 3>;
dmas = <&admac 0>, <&admac 1>, <&admac 2>, <&admac 3>,
<&admac 4>, <&admac 5>, <&admac 6>, <&admac 7>,
<&admac 8>, <&admac 9>, <&admac 10>, <&admac 11>,
<&admac 12>, <&admac 13>, <&admac 14>, <&admac 15>;
dma-names = "tx0a", "rx0a", "tx0b", "rx0b",
"tx1a", "rx1a", "tx1b", "rx1b",
"tx2a", "rx2a", "tx2b", "rx2b",
"tx3a", "rx3a", "tx3b", "rx3b";
interrupt-parent = <&aic>;
interrupts = <AIC_IRQ 0 1112 IRQ_TYPE_LEVEL_HIGH>,
<AIC_IRQ 0 1113 IRQ_TYPE_LEVEL_HIGH>,
<AIC_IRQ 0 1114 IRQ_TYPE_LEVEL_HIGH>,
<AIC_IRQ 0 1115 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&ps_audio_p>, <&ps_mca0>, <&ps_mca1>,
<&ps_mca2>, <&ps_mca3>;
resets = <&ps_audio_p>;
#sound-dai-cells = <1>;
};
gpu: gpu@406400000 {
compatible = "apple,agx-g13s";
reg = <0x4 0x6400000 0 0x40000>,
<0x4 0x4000000 0 0x1000000>;
reg-names = "asc", "sgx";
mboxes = <&agx_mbox>;
power-domains = <&ps_gfx>;
memory-region = <&uat_ttbs>, <&uat_pagetables>, <&uat_handoff>,
<&gpu_hw_cal_a>, <&gpu_hw_cal_b>, <&gpu_globals>;
memory-region-names = "ttbs", "pagetables", "handoff",
"hw-cal-a", "hw-cal-b", "globals";
apple,firmware-abi = <0 0 0>;
};
agx_mbox: mbox@406408000 {
compatible = "apple,t6000-asc-mailbox", "apple,asc-mailbox-v4";
reg = <0x4 0x6408000 0x0 0x4000>;
interrupt-parent = <&aic>;
interrupts = <AIC_IRQ 0 1059 IRQ_TYPE_LEVEL_HIGH>,
<AIC_IRQ 0 1060 IRQ_TYPE_LEVEL_HIGH>,
<AIC_IRQ 0 1061 IRQ_TYPE_LEVEL_HIGH>,
<AIC_IRQ 0 1062 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "send-empty", "send-not-empty",
"recv-empty", "recv-not-empty";
#mbox-cells = <0>;
};
pcie0_dart_0: iommu@581008000 {
compatible = "apple,t6000-dart";
reg = <0x5 0x81008000 0x0 0x4000>;
#iommu-cells = <1>;
interrupt-parent = <&aic>;
interrupts = <AIC_IRQ 0 1271 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&ps_apcie_gp_sys>;
};
pcie0_dart_1: iommu@582008000 {
compatible = "apple,t6000-dart";
reg = <0x5 0x82008000 0x0 0x4000>;
#iommu-cells = <1>;
interrupt-parent = <&aic>;
interrupts = <AIC_IRQ 0 1274 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&ps_apcie_gp_sys>;
};
pcie0_dart_2: iommu@583008000 {
compatible = "apple,t6000-dart";
reg = <0x5 0x83008000 0x0 0x4000>;
#iommu-cells = <1>;
interrupt-parent = <&aic>;
interrupts = <AIC_IRQ 0 1277 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&ps_apcie_gp_sys>;
status = "disabled";
};
pcie0_dart_3: iommu@584008000 {
compatible = "apple,t6000-dart";
reg = <0x5 0x84008000 0x0 0x4000>;
#iommu-cells = <1>;
interrupt-parent = <&aic>;
interrupts = <AIC_IRQ 0 1280 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&ps_apcie_gp_sys>;
status = "disabled";
};
pcie0: pcie@590000000 {
compatible = "apple,t6000-pcie", "apple,pcie";
device_type = "pci";
reg = <0x5 0x90000000 0x0 0x1000000>,
<0x5 0x80000000 0x0 0x100000>,
<0x5 0x81000000 0x0 0x4000>,
<0x5 0x82000000 0x0 0x4000>,
<0x5 0x83000000 0x0 0x4000>,
<0x5 0x84000000 0x0 0x4000>;
reg-names = "config", "rc", "port0", "port1", "port2", "port3";
interrupt-parent = <&aic>;
interrupts = <AIC_IRQ 0 1270 IRQ_TYPE_LEVEL_HIGH>,
<AIC_IRQ 0 1273 IRQ_TYPE_LEVEL_HIGH>,
<AIC_IRQ 0 1276 IRQ_TYPE_LEVEL_HIGH>,
<AIC_IRQ 0 1279 IRQ_TYPE_LEVEL_HIGH>;
msi-controller;
msi-parent = <&pcie0>;
msi-ranges = <&aic AIC_IRQ 0 1581 IRQ_TYPE_EDGE_RISING 32>;
iommu-map = <0x100 &pcie0_dart_0 1 1>,
<0x200 &pcie0_dart_1 1 1>,
<0x300 &pcie0_dart_2 1 1>,
<0x400 &pcie0_dart_3 1 1>;
iommu-map-mask = <0xff00>;
bus-range = <0 4>;
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x43000000 0x5 0xa0000000 0x5 0xa0000000 0x0 0x20000000>,
<0x02000000 0x0 0xc0000000 0x5 0xc0000000 0x0 0x40000000>;
power-domains = <&ps_apcie_gp_sys>;
pinctrl-0 = <&pcie_pins>;
pinctrl-names = "default";
port00: pci@0,0 {
device_type = "pci";
reg = <0x0 0x0 0x0 0x0 0x0>;
reset-gpios = <&pinctrl_ap 4 GPIO_ACTIVE_LOW>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &port00 0 0 0 0>,
<0 0 0 2 &port00 0 0 0 1>,
<0 0 0 3 &port00 0 0 0 2>,
<0 0 0 4 &port00 0 0 0 3>;
};
port01: pci@1,0 {
device_type = "pci";
reg = <0x800 0x0 0x0 0x0 0x0>;
reset-gpios = <&pinctrl_ap 5 GPIO_ACTIVE_LOW>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &port01 0 0 0 0>,
<0 0 0 2 &port01 0 0 0 1>,
<0 0 0 3 &port01 0 0 0 2>,
<0 0 0 4 &port01 0 0 0 3>;
};
port02: pci@2,0 {
device_type = "pci";
reg = <0x1000 0x0 0x0 0x0 0x0>;
reset-gpios = <&pinctrl_ap 6 GPIO_ACTIVE_LOW>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &port02 0 0 0 0>,
<0 0 0 2 &port02 0 0 0 1>,
<0 0 0 3 &port02 0 0 0 2>,
<0 0 0 4 &port02 0 0 0 3>;
status = "disabled";
};
port03: pci@3,0 {
device_type = "pci";
reg = <0x1800 0x0 0x0 0x0 0x0>;
reset-gpios = <&pinctrl_ap 7 GPIO_ACTIVE_LOW>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &port03 0 0 0 0>,
<0 0 0 2 &port03 0 0 0 1>,
<0 0 0 3 &port03 0 0 0 2>,
<0 0 0 4 &port03 0 0 0 3>;
status = "disabled";
};
};
