Anforderungen  |   Konzepte  |   Entwurf  |   Entwicklung  |   Qualitätssicherung  |   Lebenszyklus  |   Steuerung
 
 
 
 


Quelle  msm8916-lg-m216.dts   Sprache: unbekannt

 
// SPDX-License-Identifier: GPL-2.0-only

/dts-v1/;

#include "msm8916-pm8916.dtsi"
#include "msm8916-modem-qdsp6.dtsi"

#include <dt-bindings/gpio/gpio.h>

/ {
 model = "LG K10 (K420n)";
 compatible = "lg,m216", "qcom,msm8916";
 chassis-type = "handset";

 aliases {
  mmc0 = &sdhc_1; /* eMMC */
  mmc1 = &sdhc_2; /* SD card */
  serial0 = &blsp_uart2;
 };

 chosen {
  stdout-path = "serial0";
 };

 battery: battery {
  compatible = "simple-battery";
  voltage-min-design-microvolt = <3300000>;
  voltage-max-design-microvolt = <4350000>;
  energy-full-design-microwatt-hours = <8800000>;
  charge-full-design-microamp-hours = <2300000>;

  ocv-capacity-celsius = <25>;
  ocv-capacity-table-0 = <4342000 100>, <4266000 95>, <4206000 90>,
   <4148000 85>, <4094000 80>, <4046000 75>, <3994000 70>,
   <3956000 65>, <3916000 60>, <3866000 55>, <3831000 50>,
   <3808000 45>, <3789000 40>, <3776000 35>, <3769000 30>,
   <3760000 25>, <3740000 20>, <3712000 16>, <3684000 13>,
   <3676000 11>, <3674000 10>, <3672000 9>, <3669000 8>,
   <3665000 7>, <3660000 6>, <3643000 5>, <3602000 4>,
   <3542000 3>, <3458000 2>, <3326000 1>, <3000000 0>;
 };

 gpio-keys {
  compatible = "gpio-keys";

  pinctrl-0 = <&gpio_keys_default>;
  pinctrl-names = "default";

  label = "GPIO Buttons";

  volume-up-button {
   label = "Volume Up";
   gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
   linux,code = <KEY_VOLUMEUP>;
  };

  volume-down-button {
   label = "Volume Down";
   gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
   linux,code = <KEY_VOLUMEDOWN>;
  };
 };
};

&blsp_i2c2 {
 status = "okay";

 accelerometer@11 {
  compatible = "bosch,bmc150_accel";
  reg = <0x11>;

  interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_RISING>;

  mount-matrix =  "0", "1", "0",
    "-1", "0", "0",
     "0", "0", "1";

  vdd-supply = <&pm8916_l17>;
  vddio-supply = <&pm8916_l6>;

  pinctrl-0 = <&accel_int_default>;
  pinctrl-names = "default";
 };

 magnetometer@13 {
  compatible = "bosch,bmc150_magn";
  reg = <0x13>;

  interrupts-extended = <&tlmm 69 IRQ_TYPE_EDGE_RISING>;

  vdd-supply = <&pm8916_l17>;
  vddio-supply = <&pm8916_l6>;

  pinctrl-0 = <&magn_int_default>;
  pinctrl-names = "default";
 };
};

&blsp_i2c5 {
 status = "okay";

 touchscreen@34 {
  compatible = "melfas,mip4_ts";
  reg = <0x34>;

  interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>;
  ce-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;

  pinctrl-0 = <&touchscreen_default>;
  pinctrl-names = "default";
 };
};

&blsp_uart2 {
 pinctrl-0 = <&blsp_uart2_console_default>;
 pinctrl-1 = <&blsp_uart2_console_sleep>;
 pinctrl-names = "default", "sleep";
 status = "okay";
};

&mpss_mem {
 reg = <0x0 0x86800000 0x0 0x4a00000>;
};

&pm8916_bms {
 monitored-battery = <&battery>;
 power-supplies = <&pm8916_charger>;

 status = "okay";
};

&pm8916_charger {
 qcom,fast-charge-safe-current = <700000>;
 qcom,fast-charge-safe-voltage = <4300000>;

 monitored-battery = <&battery>;
 status = "okay";
};

&pm8916_codec {
 qcom,micbias1-ext-cap;
 qcom,micbias-lvl = <2800>;
 qcom,mbhc-vthreshold-low = <75 100 120 180 500>;
 qcom,mbhc-vthreshold-high = <75 100 120 180 500>;
 qcom,hphl-jack-type-normally-open;
};

&pm8916_rpm_regulators {
 pm8916_l17: l17 {
  regulator-min-microvolt = <2850000>;
  regulator-max-microvolt = <2850000>;
 };
};

&pm8916_vib {
 status = "okay";
};

&sdhc_1 {
 status = "okay";
};

&sdhc_2 {
 pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
 pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
 pinctrl-names = "default", "sleep";

 cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;

 status = "okay";
};

&sound {
 audio-routing =
  "AMIC1", "MIC BIAS External1",
  "AMIC2", "MIC BIAS Internal2",
  "AMIC3", "MIC BIAS External1";
};

&usb {
 dr_mode = "peripheral";
 extcon = <&pm8916_charger>;
 status = "okay";
};

&usb_hs_phy {
 extcon = <&pm8916_charger>;
};

&venus {
 status = "okay";
};

&venus_mem {
 status = "okay";
};

&wcnss {
 status = "okay";
};

&wcnss_iris {
 compatible = "qcom,wcn3620";
};

&wcnss_mem {
 status = "okay";
};

&tlmm {
 accel_int_default: accel-int-default-state {
  pins = "gpio115";
  function = "gpio";
  drive-strength = <2>;
  bias-disable;
 };

 gpio_keys_default: gpio-keys-default-state {
  pins = "gpio107", "gpio108";
  function = "gpio";
  drive-strength = <2>;
  bias-pull-up;
 };

 magn_int_default: magn-int-default-state {
  pins = "gpio69";
  function = "gpio";
  drive-strength = <2>;
  bias-disable;
 };

 sdc2_cd_default: sdc2-cd-default-state {
  pins = "gpio38";
  function = "gpio";
  drive-strength = <2>;
  bias-disable;
 };

 touchscreen_default: touchscreen-default-state {
  touchscreen-pins {
   pins = "gpio13";
   function = "gpio";
   drive-strength = <2>;
   bias-pull-up;
  };

  ce-pins {
   pins = "gpio12";
   function = "gpio";
   drive-strength = <2>;
   bias-disable;
  };
 };
};

[ Dauer der Verarbeitung: 0.3 Sekunden  (vorverarbeitet)  ]

                                                                                                                                                                                                                                                                                                                                                                                                     


Neuigkeiten

     Aktuelles
     Motto des Tages

Software

     Produkte
     Quellcodebibliothek

Aktivitäten

     Artikel über Sicherheit
     Anleitung zur Aktivierung von SSL

Muße

     Gedichte
     Musik
     Bilder

Jenseits des Üblichen ....
    

Besucherstatistik

Besucherstatistik

Monitoring

Montastic status badge