// SPDX-License-Identifier: GPL-2.0-only OR BSD-3-Clause
#include <dt-bindings/spmi/spmi.h>
#include <dt-bindings/iio/qcom,spmi-vadc.h>
&spmi_bus {
pmic@0 {
compatible = "qcom,pmp8074", "qcom,spmi-pmic";
reg = <0x0 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
pmp8074_adc: adc@3100 {
compatible = "qcom,spmi-adc-rev2";
reg = <0x3100>;
interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
#size-cells = <0>;
#io-channel-cells = <1>;
channel@0 {
reg = <ADC5_REF_GND>;
qcom,pre-scaling = <1 1>;
label = "ref_gnd";
};
channel@1 {
reg = <ADC5_1P25VREF>;
qcom,pre-scaling = <1 1>;
label = "vref_1p25";
};
channel@2 {
reg = <ADC5_VREF_VADC>;
qcom,pre-scaling = <1 1>;
label = "vref_vadc";
};
channel@6 {
reg = <ADC5_DIE_TEMP>;
qcom,pre-scaling = <1 1>;
label = "pmic_die";
};
channel@76 {
reg = <ADC5_XO_THERM_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
label = "xo_therm";
};
channel@77 {
reg = <ADC5_AMUX_THM1_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
label = "pa_therm1";
};
channel@78 {
reg = <ADC5_AMUX_THM2_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
label = "pa_therm2";
};
channel@79 {
reg = <ADC5_AMUX_THM3_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
label = "pa_therm3";
};
channel@131 {
reg = <ADC5_VPH_PWR>;
qcom,pre-scaling = <1 3>;
label = "vph_pwr";
};
};
pmp8074_rtc: rtc@6000 {
compatible = "qcom,pm8941-rtc";
reg = <0x6000>, <0x6100>;
reg-names = "rtc", "alarm";
interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
allow-set-time;
status = "disabled";
};
pmp8074_gpios: gpio@c000 {
compatible = "qcom,pmp8074-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pmp8074_gpios 0 0 12>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
pmic@1 {
compatible = "qcom,pmp8074", "qcom,spmi-pmic";
reg = <0x1 SPMI_USID>;
regulators {
compatible = "qcom,pmp8074-regulators";
s3: s3 {
regulator-name = "vdd_s3";
regulator-min-microvolt = <592000>;
regulator-max-microvolt = <1064000>;
regulator-always-on;
regulator-boot-on;
};
s4: s4 {
regulator-name = "vdd_s4";
regulator-min-microvolt = <712000>;
regulator-max-microvolt = <992000>;
regulator-always-on;
regulator-boot-on;
};
l11: l11 {
regulator-name = "l11";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
};
};
};
};
